Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Report the number of processors in PowerNow-k8 correctly
  [CPUFREQ] do not declare undefined functions
  [CPUFREQ] cleanup kconfig options
  [CPUFREQ] Longhaul - Revert Longhaul ver. 2
  [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
  [CPUFREQ] Fix limited cpufreq when booted on battery
  Fix preemption warnings in speedstep-centrino.c
  [CPUFREQ] Longhaul - Correct PCI code
  [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu

arch/i386/kernel/cpu/cpufreq/longhaul.c

@@ -590,20 +590,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
 static int enable_arbiter_disable(void)
 {
 	struct pci_dev *dev;
+	int status;
 	int reg;
 	u8 pci_cmd;
 
+	status = 1;
 	/* Find PLE133 host bridge */
 	reg = 0x78;
-	dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
+			     NULL);
 	/* Find CLE266 host bridge */
 	if (dev == NULL) {
 		reg = 0x76;
-		dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+		dev = pci_get_device(PCI_VENDOR_ID_VIA,
+				     PCI_DEVICE_ID_VIA_862X_0, NULL);
 		/* Find CN400 V-Link host bridge */
 		if (dev == NULL)
-			dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+			dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
-
 	}
 	if (dev != NULL) {
 		/* Enable access to port 0x22 */
@@ -615,10 +618,11 @@ static int enable_arbiter_disable(void)
 			if (!(pci_cmd & 1<<7)) {
 				printk(KERN_ERR PFX
 					"Can't enable access to port 0x22.\n");
-				return 0;
+				status = 0;
 			}
 		}
-		return 1;
+		pci_dev_put(dev);
+		return status;
 	}
 	return 0;
 }
@@ -629,7 +633,7 @@ static int longhaul_setup_vt8235(void)
 	u8 pci_cmd;
 
 	/* Find VT8235 southbridge */
-	dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
+	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
 	if (dev != NULL) {
 		/* Set transition time to max */
 		pci_read_config_byte(dev, 0xec, &pci_cmd);
@@ -641,6 +645,7 @@ static int longhaul_setup_vt8235(void)
 		pci_read_config_byte(dev, 0xe5, &pci_cmd);
 		pci_cmd |= 1 << 7;
 		pci_write_config_byte(dev, 0xe5, pci_cmd);
+		pci_dev_put(dev);
 		return 1;
 	}
 	return 0;
@@ -678,7 +683,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 				sizeof(samuel2_eblcr));
 			break;
 		case 1 ... 15:
-			longhaul_version = TYPE_LONGHAUL_V2;
+			longhaul_version = TYPE_LONGHAUL_V1;
 			if (c->x86_mask < 8) {
 				cpu_model = CPU_SAMUEL2;
 				cpuname = "C3 'Samuel 2' [C5B]";

arch/i386/kernel/cpu/cpufreq/p4-clockmod.c

@@ -27,7 +27,6 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
-#include <linux/sched.h>	/* current / set_cpus_allowed() */
 
 #include <asm/processor.h>
 #include <asm/msr.h>
@@ -62,7 +61,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
 		return -EINVAL;
 
-	rdmsr(MSR_IA32_THERM_STATUS, l, h);
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
 
 	if (l & 0x01)
 		dprintk("CPU#%d currently thermal throttled\n", cpu);
@@ -70,10 +69,10 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
 		newstate = DC_38PT;
 
-	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
 	if (newstate == DC_DISABLE) {
 		dprintk("CPU#%d disabling modulation\n", cpu);
-		wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
 	} else {
 		dprintk("CPU#%d setting duty cycle to %d%%\n",
 			cpu, ((125 * newstate) / 10));
@@ -84,7 +83,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 		 */
 		l = (l & ~14);
 		l = l | (1<<4) | ((newstate & 0x7)<<1);
-		wrmsr(MSR_IA32_THERM_CONTROL, l, h);
+		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
 	}
 
 	return 0;
@@ -111,7 +110,6 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 {
 	unsigned int    newstate = DC_RESV;
 	struct cpufreq_freqs freqs;
-	cpumask_t cpus_allowed;
 	int i;
 
 	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
@@ -132,17 +130,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
-	cpus_allowed = current->cpus_allowed;
+	for_each_cpu_mask(i, policy->cpus)
-
-	for_each_cpu_mask(i, policy->cpus) {
-		cpumask_t this_cpu = cpumask_of_cpu(i);
-
-		set_cpus_allowed(current, this_cpu);
-		BUG_ON(smp_processor_id() != i);
-
 		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
-	}
-	set_cpus_allowed(current, cpus_allowed);
 
 	/* notifiers */
 	for_each_cpu_mask(i, policy->cpus) {
@@ -256,17 +245,9 @@ static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
 
 static unsigned int cpufreq_p4_get(unsigned int cpu)
 {
-	cpumask_t cpus_allowed;
 	u32 l, h;
 
-	cpus_allowed = current->cpus_allowed;
+	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
-
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(smp_processor_id() != cpu);
-
-	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
-
-	set_cpus_allowed(current, cpus_allowed);
 
 	if (l & 0x10) {
 		l = l >> 1;

arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -661,7 +661,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
 
 	dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
 	data->powernow_table = powernow_table;
-	print_basics(data);
+	if (first_cpu(cpu_core_map[data->cpu]) == data->cpu)
+		print_basics(data);
 
 	for (j = 0; j < data->numps; j++)
 		if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
@@ -814,7 +815,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 
 	/* fill in data */
 	data->numps = data->acpi_data.state_count;
-	print_basics(data);
+	if (first_cpu(cpu_core_map[data->cpu]) == data->cpu)
+		print_basics(data);
 	powernow_k8_acpi_pst_values(data, 0);
 
 	/* notify BIOS that we exist */

arch/i386/kernel/cpu/cpufreq/powernow-k8.h

@@ -215,8 +215,10 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
 
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
 static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+#endif
 
 #ifdef CONFIG_SMP
 static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])

arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c

@@ -720,6 +720,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			cpu_set(j, set_mask);
 
 		set_cpus_allowed(current, set_mask);
+		preempt_disable();
 		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
@@ -727,6 +728,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 				/* We haven't started the transition yet. */
 				goto migrate_end;
 			}
+			preempt_enable();
 			break;
 		}
 
@@ -761,10 +763,13 @@ static int centrino_target (struct cpufreq_policy *policy,
 		}
 
 		wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
-		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
+		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+			preempt_enable();
 			break;
+		}
 
 		cpu_set(j, covered_cpus);
+		preempt_enable();
 	}
 
 	for_each_cpu_mask(k, online_policy_cpus) {
@@ -796,8 +801,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
+	set_cpus_allowed(current, saved_mask);
+	return 0;
 
 migrate_end:
+	preempt_enable();
 	set_cpus_allowed(current, saved_mask);
 	return 0;
 }

arch/x86_64/kernel/cpufreq/Kconfig

@@ -16,6 +16,9 @@ config X86_POWERNOW_K8
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>. 
 
 	  If in doubt, say N.
@@ -38,6 +41,9 @@ config X86_SPEEDSTEP_CENTRINO
 	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
 	  or 64bit enabled Intel Xeons.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -55,6 +61,9 @@ config X86_ACPI_CPUFREQ
 	  Processor Performance States.
 	  This driver also supports Intel Enhanced Speedstep.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -62,7 +71,7 @@ config X86_ACPI_CPUFREQ
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
-        bool "/proc/acpi/processor/../performance interface (deprecated)"
+	bool "/proc/acpi/processor/../performance interface (deprecated)"
 	depends on PROC_FS
 	depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K8_ACPI
 	help
@@ -86,16 +95,18 @@ config X86_P4_CLOCKMOD
 	  slowdowns and noticeable latencies.  Normally Speedstep should be used
 	  instead.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  Unless you are absolutely sure say N.
 
 
 config X86_SPEEDSTEP_LIB
-        tristate
+	tristate
-        default X86_P4_CLOCKMOD
+	default X86_P4_CLOCKMOD
 
 endif
 
 endmenu
-

drivers/acpi/processor_perflib.c

@@ -433,49 +433,6 @@ static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
 			   PDE(inode)->data);
 }
 
-static ssize_t
-acpi_processor_write_performance(struct file *file,
-				 const char __user * buffer,
-				 size_t count, loff_t * data)
-{
-	int result = 0;
-	struct seq_file *m = file->private_data;
-	struct acpi_processor *pr = m->private;
-	struct acpi_processor_performance *perf;
-	char state_string[12] = { '\0' };
-	unsigned int new_state = 0;
-	struct cpufreq_policy policy;
-
-
-	if (!pr || (count > sizeof(state_string) - 1))
-		return -EINVAL;
-
-	perf = pr->performance;
-	if (!perf)
-		return -EINVAL;
-
-	if (copy_from_user(state_string, buffer, count))
-		return -EFAULT;
-
-	state_string[count] = '\0';
-	new_state = simple_strtoul(state_string, NULL, 0);
-
-	if (new_state >= perf->state_count)
-		return -EINVAL;
-
-	cpufreq_get_policy(&policy, pr->id);
-
-	policy.cpu = pr->id;
-	policy.min = perf->states[new_state].core_frequency * 1000;
-	policy.max = perf->states[new_state].core_frequency * 1000;
-
-	result = cpufreq_set_policy(&policy);
-	if (result)
-		return result;
-
-	return count;
-}
-
 static void acpi_cpufreq_add_file(struct acpi_processor *pr)
 {
 	struct proc_dir_entry *entry = NULL;
@@ -487,10 +444,9 @@ static void acpi_cpufreq_add_file(struct acpi_processor *pr)
 
 	/* add file 'performance' [R/W] */
 	entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
-				  S_IFREG | S_IRUGO | S_IWUSR,
+				  S_IFREG | S_IRUGO,
 				  acpi_device_dir(device));
 	if (entry){
-		acpi_processor_perf_fops.write = acpi_processor_write_performance;
 		entry->proc_fops = &acpi_processor_perf_fops;
 		entry->data = acpi_driver_data(device);
 		entry->owner = THIS_MODULE;

drivers/cpufreq/Kconfig

@@ -9,6 +9,9 @@ config CPU_FREQ
 	  clock speed, you need to either enable a dynamic cpufreq governor
 	  (see below) after boot, or use a userspace tool.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq>.
 
 	  If in doubt, say N.
@@ -16,7 +19,7 @@ config CPU_FREQ
 if CPU_FREQ
 
 config CPU_FREQ_TABLE
-       tristate
+	tristate
 
 config CPU_FREQ_DEBUG
 	bool "Enable CPUfreq debugging"
@@ -32,19 +35,26 @@ config CPU_FREQ_DEBUG
 	       4 to activate CPUfreq governor debugging
 
 config CPU_FREQ_STAT
-       tristate "CPU frequency translation statistics"
+	tristate "CPU frequency translation statistics"
-       select CPU_FREQ_TABLE
+	select CPU_FREQ_TABLE
-       default y
+	default y
-       help
+	help
-         This driver exports CPU frequency statistics information through sysfs
+	  This driver exports CPU frequency statistics information through sysfs
-         file system
+	  file system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_stats.
+
+	  If in doubt, say N.
 
 config CPU_FREQ_STAT_DETAILS
-       bool "CPU frequency translation statistics details"
+	bool "CPU frequency translation statistics details"
-       depends on CPU_FREQ_STAT
+	depends on CPU_FREQ_STAT
-       help
+	help
-         This will show detail CPU frequency translation table in sysfs file
+	  This will show detail CPU frequency translation table in sysfs file
-         system
+	  system.
+
+	  If in doubt, say N.
 
 # Note that it is not currently possible to set the other governors (such as ondemand)
 # as the default, since if they fail to initialise, cpufreq will be
@@ -78,29 +88,38 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 endchoice
 
 config CPU_FREQ_GOV_PERFORMANCE
-       tristate "'performance' governor"
+	tristate "'performance' governor"
-       help
+	help
 	  This cpufreq governor sets the frequency statically to the
 	  highest available CPU frequency.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_performance.
+
 	  If in doubt, say Y.
 
 config CPU_FREQ_GOV_POWERSAVE
-       tristate "'powersave' governor"
+	tristate "'powersave' governor"
-       help
+	help
 	  This cpufreq governor sets the frequency statically to the
 	  lowest available CPU frequency.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_powersave.
+
 	  If in doubt, say Y.
 
 config CPU_FREQ_GOV_USERSPACE
-       tristate "'userspace' governor for userspace frequency scaling"
+	tristate "'userspace' governor for userspace frequency scaling"
-       help
+	help
 	  Enable this cpufreq governor when you either want to set the
 	  CPU frequency manually or when an userspace program shall
 	  be able to set the CPU dynamically, like on LART 
 	  <http://www.lartmaker.nl/>.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_userspace.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say Y.
@@ -116,6 +135,9 @@ config CPU_FREQ_GOV_ONDEMAND
 	  do fast frequency switching (i.e, very low latency frequency
 	  transitions). 
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_ondemand.
+
 	  For details, take a look at linux/Documentation/cpu-freq.
 
 	  If in doubt, say N.
@@ -136,6 +158,9 @@ config CPU_FREQ_GOV_CONSERVATIVE
 	  step-by-step latency issues between the minimum and maximum frequency
 	  transitions in the CPU) you will probably want to use this governor.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_conservative.
+
 	  For details, take a look at linux/Documentation/cpu-freq.
 
 	  If in doubt, say N.

drivers/cpufreq/cpufreq.c

@@ -768,6 +768,9 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 		unlock_policy_rwsem_write(cpu);
 		goto err_out;
 	}
+	policy->user_policy.min = policy->cpuinfo.min_freq;
+	policy->user_policy.max = policy->cpuinfo.max_freq;
+	policy->user_policy.governor = policy->governor;
 
 #ifdef CONFIG_SMP
 	for_each_cpu_mask(j, policy->cpus) {
@@ -858,10 +861,13 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 
 	policy->governor = NULL; /* to assure that the starting sequence is
 				  * run in cpufreq_set_policy */
-	unlock_policy_rwsem_write(cpu);
 
 	/* set default policy */
-	ret = cpufreq_set_policy(&new_policy);
+	ret = __cpufreq_set_policy(policy, &new_policy);
+	policy->user_policy.policy = policy->policy;
+
+	unlock_policy_rwsem_write(cpu);
+
 	if (ret) {
 		dprintk("setting policy failed\n");
 		goto err_out_unregister;
@@ -1619,43 +1625,6 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	return ret;
 }
 
-/**
- *	cpufreq_set_policy - set a new CPUFreq policy
- *	@policy: policy to be set.
- *
- *	Sets a new CPU frequency and voltage scaling policy.
- */
-int cpufreq_set_policy(struct cpufreq_policy *policy)
-{
-	int ret = 0;
-	struct cpufreq_policy *data;
-
-	if (!policy)
-		return -EINVAL;
-
-	data = cpufreq_cpu_get(policy->cpu);
-	if (!data)
-		return -EINVAL;
-
-	if (unlikely(lock_policy_rwsem_write(policy->cpu)))
-		return -EINVAL;
-
-
-	ret = __cpufreq_set_policy(data, policy);
-	data->user_policy.min = data->min;
-	data->user_policy.max = data->max;
-	data->user_policy.policy = data->policy;
-	data->user_policy.governor = data->governor;
-
-	unlock_policy_rwsem_write(policy->cpu);
-
-	cpufreq_cpu_put(data);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpufreq_set_policy);
-
-
 /**
  *	cpufreq_update_policy - re-evaluate an existing cpufreq policy
  *	@cpu: CPU which shall be re-evaluated

include/linux/cpufreq.h

@@ -257,7 +257,6 @@ struct freq_attr {
 /*********************************************************************
  *                        CPUFREQ 2.6. INTERFACE                     *
  *********************************************************************/
-int cpufreq_set_policy(struct cpufreq_policy *policy);
 int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
 int cpufreq_update_policy(unsigned int cpu);