AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

powerpc/44x: Support for 256KB PAGE_SIZE

Browse Source 
This patch adds support for 256KB pages on ppc44x-based boards.

For simplification of implementation with 256KB pages we still assume
2-level paging. As a side effect this leads to wasting extra memory space
reserved for PTE tables: only 1/4 of pages allocated for PTEs are
actually used. But this may be an acceptable trade-off to achieve the
high performance we have with big PAGE_SIZEs in some applications (e.g.
RAID).

Also with 256KB PAGE_SIZE we increase THREAD_SIZE up to 32KB to minimize
the risk of stack overflows in the cases of on-stack arrays, which size
depends on the page size (e.g. multipage BIOs, NTFS, etc.).

With 256KB PAGE_SIZE we need to decrease the PKMAP_ORDER at least down
to 9, otherwise all high memory (2 ^ 10 * PAGE_SIZE == 256MB) we'll be
occupied by PKMAP addresses leaving no place for vmalloc. We do not
separate PKMAP_ORDER for 256K from 16K/64K PAGE_SIZE here; actually that
value of 10 in support for 16K/64K had been selected rather intuitively.
Thus now for all cases of PAGE_SIZE on ppc44x (including the default, 4KB,
one) we have 512 pages for PKMAP.

Because ELF standard supports only page sizes up to 64K, then you should
use binutils later than 2.17.50.0.3 with '-zmax-page-size' set to 256K
for building applications, which are to be run with the 256KB-page sized
kernel. If using the older binutils, then you should patch them like follows:

	--- binutils/bfd/elf32-ppc.c.orig
	+++ binutils/bfd/elf32-ppc.c

	-#define ELF_MAXPAGESIZE                0x10000
	+#define ELF_MAXPAGESIZE                0x40000

One more restriction we currently have with 256KB page sizes is inability
to use shmem safely, so, for now, the 256KB is available only if you turn
the CONFIG_SHMEM option off (another variant is to use BROKEN).
Though, if you need shmem with 256KB pages, you can always remove the !SHMEM
dependency in 'config PPC_256K_PAGES', and use the workaround available here:
 http://lkml.org/lkml/2008/12/19/20

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
Yuri Tikhonov 2009-01-29 01:40:44 +00:00 committed by Josh Boyer
parent 6071ed0487
commit e12401222f
7 changed files with 55 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
arch/powerpc/Kconfig
View File

@ -409,6 +409,18 @@ config PPC_HAS_HASH_64K
depends on PPC64
default n
config STDBINUTILS
bool "Using standard binutils settings"
depends on 44x
default y
help
Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
Note, that kernel will be able to run only those applications,
which had been compiled using binutils later than 2.17.50.0.3 with
'-zmax-page-size' set to 256K (the default is 64K). Or, if using
the older binutils, you can patch them with a trivial patch, which
changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
choice
prompt "Page size"
default PPC_4K_PAGES
@ -444,6 +456,19 @@ config PPC_64K_PAGES
bool "64k page size" if 44x || PPC_STD_MMU_64
select PPC_HAS_HASH_64K if PPC_STD_MMU_64
config PPC_256K_PAGES
bool "256k page size" if 44x
depends on !STDBINUTILS && (!SHMEM || BROKEN)
help
Make the page size 256k.
As the ELF standard only requires alignment to support page
sizes up to 64k, you will need to compile all of your user
space applications with a non-standard binutils settings
(see the STDBINUTILS description for details).
Say N unless you know what you are doing.
endchoice
config FORCE_MAX_ZONEORDER
@ -456,6 +481,8 @@ config FORCE_MAX_ZONEORDER
default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
range 11 64
default "11"
help

10
arch/powerpc/include/asm/highmem.h
View File

@ -39,15 +39,15 @@ extern pte_t *pkmap_page_table;
* chunk of RAM.
*/
/*
* We use one full pte table with 4K pages. And with 16K/64K pages pte
* table covers enough memory (32MB and 512MB resp.) that both FIXMAP
* and PKMAP can be placed in single pte table. We use 1024 pages for
* PKMAP in case of 16K/64K pages.
* We use one full pte table with 4K pages. And with 16K/64K/256K pages pte
* table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP
* and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP
* in case of 16K/64K/256K page sizes.
*/
#ifdef CONFIG_PPC_4K_PAGES
#define PKMAP_ORDER PTE_SHIFT
#else
#define PKMAP_ORDER 10
#define PKMAP_ORDER 9
#endif
#define LAST_PKMAP (1 << PKMAP_ORDER)
#ifndef CONFIG_PPC_4K_PAGES

2
arch/powerpc/include/asm/mmu-44x.h
View File

@ -83,6 +83,8 @@ typedef struct {
#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
#elif (PAGE_SHIFT == 16)
#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
#elif (PAGE_SHIFT == 18)
#define PPC44x_TLBE_SIZE PPC44x_TLB_256K
#else
#error "Unsupported PAGE_SIZE"
#endif

6
arch/powerpc/include/asm/page.h
View File

@ -19,12 +19,14 @@
#include <asm/kdump.h>
/*
* On regular PPC32 page size is 4K (but we support 4K/16K/64K pages
* On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages
* on PPC44x). For PPC64 we support either 4K or 64K software
* page size. When using 64K pages however, whether we are really supporting
* 64K pages in HW or not is irrelevant to those definitions.
*/
#if defined(CONFIG_PPC_64K_PAGES)
#if defined(CONFIG_PPC_256K_PAGES)
#define PAGE_SHIFT 18
#elif defined(CONFIG_PPC_64K_PAGES)
#define PAGE_SHIFT 16
#elif defined(CONFIG_PPC_16K_PAGES)
#define PAGE_SHIFT 14

4
arch/powerpc/include/asm/page_32.h
View File

@ -19,7 +19,11 @@
#define PTE_FLAGS_OFFSET 0
#endif
#ifdef CONFIG_PPC_256K_PAGES
#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2 - 2) /* 1/4 of a page */
#else
#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */
#endif
#ifndef __ASSEMBLY__
/*

4
arch/powerpc/include/asm/thread_info.h
View File

@ -12,8 +12,10 @@
/* We have 8k stacks on ppc32 and 16k on ppc64 */
#ifdef CONFIG_PPC64
#if defined(CONFIG_PPC64)
#define THREAD_SHIFT 14
#elif defined(CONFIG_PPC_256K_PAGES)
#define THREAD_SHIFT 15
#else
#define THREAD_SHIFT 13
#endif

11
arch/powerpc/kernel/head_booke.h
View File

@ -10,6 +10,15 @@
mtspr SPRN_IVOR##vector_number,r26; \
sync
#if (THREAD_SHIFT < 15)
#define ALLOC_STACK_FRAME(reg, val) \
addi reg,reg,val
#else
#define ALLOC_STACK_FRAME(reg, val) \
addis reg,reg,val@ha; \
addi reg,reg,val@l
#endif
#define NORMAL_EXCEPTION_PROLOG \
mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
mtspr SPRN_SPRG1,r11; \
@ -20,7 +29,7 @@
beq 1f; \
mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
addi r1,r1,THREAD_SIZE; \
ALLOC_STACK_FRAME(r1, THREAD_SIZE); \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
mr r11,r1; \
stw r10,_CCR(r11); /* save various registers */\