forked from luck/tmp_suning_uos_patched
[PATCH] orinoco: New driver - orinoco_nortel.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 15:50:55 2005 -0400
New driver - orinoco_nortel.
This is a driver for Nortel emobility PCI adaptors, which consist of an
Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The
driver initializes the device and uses Orinoco core driver for actual
wireless networking.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Pavel Roskin
Jeff Garzik
parent
8c09e16bd8
commit
ec82905177
@ -309,6 +309,15 @@ config TMD_HERMES
|
||||
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
|
||||
802.11b PCMCIA cards can be used in desktop machines.
|
||||
|
||||
config NORTEL_HERMES
|
||||
tristate "Nortel emobility PCI adaptor support"
|
||||
depends on PCI && HERMES
|
||||
help
|
||||
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
||||
orinoco) driver when used in Nortel emobility PCI adaptors. These
|
||||
adaptors are not full PCMCIA controllers, but act as a more limited
|
||||
PCI <-> PCMCIA bridge.
|
||||
|
||||
config PCI_HERMES
|
||||
tristate "Prism 2.5 PCI 802.11b adaptor support"
|
||||
depends on PCI && HERMES
|
||||
|
||||
@ -22,6 +22,7 @@ obj-$(CONFIG_APPLE_AIRPORT) += airport.o
|
||||
obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
|
||||
obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
|
||||
obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
|
||||
obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o
|
||||
|
||||
obj-$(CONFIG_AIRO) += airo.o
|
||||
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
|
||||
|
||||
324
drivers/net/wireless/orinoco_nortel.c
Normal file
324
drivers/net/wireless/orinoco_nortel.c
Normal file
@ -0,0 +1,324 @@
|
||||
/* orinoco_nortel.c
|
||||
*
|
||||
* Driver for Prism II devices which would usually be driven by orinoco_cs,
|
||||
* but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter.
|
||||
*
|
||||
* Copyright (C) 2002 Tobias Hoffmann
|
||||
* (C) 2003 Christoph Jungegger <disdos@traum404.de>
|
||||
*
|
||||
* Some of this code is borrowed from orinoco_plx.c
|
||||
* Copyright (C) 2001 Daniel Barlow
|
||||
* Some of this code is borrowed from orinoco_pci.c
|
||||
* Copyright (C) 2001 Jean Tourrilhes
|
||||
* Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
|
||||
* has been copied from it. linux-wlan-ng-0.1.10 is originally :
|
||||
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
|
||||
*
|
||||
* The contents of this file are subject to the Mozilla Public License
|
||||
* Version 1.1 (the "License"); you may not use this file except in
|
||||
* compliance with the License. You may obtain a copy of the License
|
||||
* at http://www.mozilla.org/MPL/
|
||||
*
|
||||
* Software distributed under the License is distributed on an "AS IS"
|
||||
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
|
||||
* the License for the specific language governing rights and
|
||||
* limitations under the License.
|
||||
*
|
||||
* Alternatively, the contents of this file may be used under the
|
||||
* terms of the GNU General Public License version 2 (the "GPL"), in
|
||||
* which case the provisions of the GPL are applicable instead of the
|
||||
* above. If you wish to allow the use of your version of this file
|
||||
* only under the terms of the GPL and not to allow others to use your
|
||||
* version of this file under the MPL, indicate your decision by
|
||||
* deleting the provisions above and replace them with the notice and
|
||||
* other provisions required by the GPL. If you do not delete the
|
||||
* provisions above, a recipient may use your version of this file
|
||||
* under either the MPL or the GPL.
|
||||
*/
|
||||
|
||||
#define DRIVER_NAME "orinoco_nortel"
|
||||
#define PFX DRIVER_NAME ": "
|
||||
|
||||
#include <linux/config.h>
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/ptrace.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/system.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/if_arp.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/fcntl.h>
|
||||
|
||||
#include <pcmcia/cisreg.h>
|
||||
|
||||
#include "hermes.h"
|
||||
#include "orinoco.h"
|
||||
|
||||
#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
|
||||
#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
|
||||
|
||||
|
||||
/* Nortel specific data */
|
||||
struct nortel_pci_card {
|
||||
unsigned long iobase1;
|
||||
unsigned long iobase2;
|
||||
};
|
||||
|
||||
/*
|
||||
* Do a soft reset of the PCI card using the Configuration Option Register
|
||||
* We need this to get going...
|
||||
* This is the part of the code that is strongly inspired from wlan-ng
|
||||
*
|
||||
* Note bis : Don't try to access HERMES_CMD during the reset phase.
|
||||
* It just won't work !
|
||||
*/
|
||||
static int nortel_pci_cor_reset(struct orinoco_private *priv)
|
||||
{
|
||||
struct nortel_pci_card *card = priv->card;
|
||||
|
||||
/* Assert the reset until the card notice */
|
||||
outw_p(8, card->iobase1 + 2);
|
||||
inw(card->iobase2 + COR_OFFSET);
|
||||
outw_p(0x80, card->iobase2 + COR_OFFSET);
|
||||
mdelay(1);
|
||||
|
||||
/* Give time for the card to recover from this hard effort */
|
||||
outw_p(0, card->iobase2 + COR_OFFSET);
|
||||
outw_p(0, card->iobase2 + COR_OFFSET);
|
||||
mdelay(1);
|
||||
|
||||
/* set COR as usual */
|
||||
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
||||
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
||||
mdelay(1);
|
||||
|
||||
outw_p(0x228, card->iobase1 + 2);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int nortel_pci_hw_init(struct nortel_pci_card *card)
|
||||
{
|
||||
int i;
|
||||
u32 reg;
|
||||
|
||||
/* setup bridge */
|
||||
if (inw(card->iobase1) & 1) {
|
||||
printk(KERN_ERR PFX "brg1 answer1 wrong\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
outw_p(0x118, card->iobase1 + 2);
|
||||
outw_p(0x108, card->iobase1 + 2);
|
||||
mdelay(30);
|
||||
outw_p(0x8, card->iobase1 + 2);
|
||||
for (i = 0; i < 30; i++) {
|
||||
mdelay(30);
|
||||
if (inw(card->iobase1) & 0x10) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (i == 30) {
|
||||
printk(KERN_ERR PFX "brg1 timed out\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
if (inw(card->iobase2 + 0xe0) & 1) {
|
||||
printk(KERN_ERR PFX "brg2 answer1 wrong\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
if (inw(card->iobase2 + 0xe2) & 1) {
|
||||
printk(KERN_ERR PFX "brg2 answer2 wrong\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
if (inw(card->iobase2 + 0xe4) & 1) {
|
||||
printk(KERN_ERR PFX "brg2 answer3 wrong\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
/* set the PCMCIA COR-Register */
|
||||
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
||||
mdelay(1);
|
||||
reg = inw(card->iobase2 + COR_OFFSET);
|
||||
if (reg != COR_VALUE) {
|
||||
printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
|
||||
reg);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
/* set leds */
|
||||
outw_p(1, card->iobase1 + 10);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nortel_pci_init_one(struct pci_dev *pdev,
|
||||
const struct pci_device_id *ent)
|
||||
{
|
||||
int err;
|
||||
struct orinoco_private *priv;
|
||||
struct nortel_pci_card *card;
|
||||
struct net_device *dev;
|
||||
void __iomem *iomem;
|
||||
|
||||
err = pci_enable_device(pdev);
|
||||
if (err) {
|
||||
printk(KERN_ERR PFX "Cannot enable PCI device\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = pci_request_regions(pdev, DRIVER_NAME);
|
||||
if (err != 0) {
|
||||
printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
|
||||
goto fail_resources;
|
||||
}
|
||||
|
||||
iomem = pci_iomap(pdev, 3, 0);
|
||||
if (!iomem) {
|
||||
err = -ENOMEM;
|
||||
goto fail_map_io;
|
||||
}
|
||||
|
||||
/* Allocate network device */
|
||||
dev = alloc_orinocodev(sizeof(*card), nortel_pci_cor_reset);
|
||||
if (!dev) {
|
||||
printk(KERN_ERR PFX "Cannot allocate network device\n");
|
||||
err = -ENOMEM;
|
||||
goto fail_alloc;
|
||||
}
|
||||
|
||||
priv = netdev_priv(dev);
|
||||
card = priv->card;
|
||||
card->iobase1 = pci_resource_start(pdev, 0);
|
||||
card->iobase2 = pci_resource_start(pdev, 1);
|
||||
dev->base_addr = pci_resource_start(pdev, 2);
|
||||
SET_MODULE_OWNER(dev);
|
||||
SET_NETDEV_DEV(dev, &pdev->dev);
|
||||
|
||||
hermes_struct_init(&priv->hw, iomem, HERMES_16BIT_REGSPACING);
|
||||
|
||||
printk(KERN_DEBUG PFX "Detected Nortel PCI device at %s irq:%d, "
|
||||
"io addr:0x%lx\n", pci_name(pdev), pdev->irq, dev->base_addr);
|
||||
|
||||
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
|
||||
dev->name, dev);
|
||||
if (err) {
|
||||
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
|
||||
err = -EBUSY;
|
||||
goto fail_irq;
|
||||
}
|
||||
dev->irq = pdev->irq;
|
||||
|
||||
err = nortel_pci_hw_init(card);
|
||||
if (err) {
|
||||
printk(KERN_ERR PFX "Hardware initialization failed\n");
|
||||
goto fail;
|
||||
}
|
||||
|
||||
err = nortel_pci_cor_reset(priv);
|
||||
if (err) {
|
||||
printk(KERN_ERR PFX "Initial reset failed\n");
|
||||
goto fail;
|
||||
}
|
||||
|
||||
|
||||
err = register_netdev(dev);
|
||||
if (err) {
|
||||
printk(KERN_ERR PFX "Cannot register network device\n");
|
||||
goto fail;
|
||||
}
|
||||
|
||||
pci_set_drvdata(pdev, dev);
|
||||
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
free_irq(pdev->irq, dev);
|
||||
|
||||
fail_irq:
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
free_orinocodev(dev);
|
||||
|
||||
fail_alloc:
|
||||
pci_iounmap(pdev, iomem);
|
||||
|
||||
fail_map_io:
|
||||
pci_release_regions(pdev);
|
||||
|
||||
fail_resources:
|
||||
pci_disable_device(pdev);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __devexit nortel_pci_remove_one(struct pci_dev *pdev)
|
||||
{
|
||||
struct net_device *dev = pci_get_drvdata(pdev);
|
||||
struct orinoco_private *priv = netdev_priv(dev);
|
||||
struct nortel_pci_card *card = priv->card;
|
||||
|
||||
/* clear leds */
|
||||
outw_p(0, card->iobase1 + 10);
|
||||
|
||||
unregister_netdev(dev);
|
||||
free_irq(dev->irq, dev);
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
free_orinocodev(dev);
|
||||
pci_iounmap(pdev, priv->hw.iobase);
|
||||
pci_release_regions(pdev);
|
||||
pci_disable_device(pdev);
|
||||
}
|
||||
|
||||
|
||||
static struct pci_device_id nortel_pci_id_table[] = {
|
||||
/* Nortel emobility PCI */
|
||||
{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
|
||||
{0,},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(pci, nortel_pci_id_table);
|
||||
|
||||
static struct pci_driver nortel_pci_driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.id_table = nortel_pci_id_table,
|
||||
.probe = nortel_pci_init_one,
|
||||
.remove = __devexit_p(nortel_pci_remove_one),
|
||||
};
|
||||
|
||||
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
|
||||
" (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
|
||||
MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
|
||||
MODULE_DESCRIPTION
|
||||
("Driver for wireless LAN cards using the Nortel PCI bridge");
|
||||
MODULE_LICENSE("Dual MPL/GPL");
|
||||
|
||||
static int __init nortel_pci_init(void)
|
||||
{
|
||||
printk(KERN_DEBUG "%s\n", version);
|
||||
return pci_module_init(&nortel_pci_driver);
|
||||
}
|
||||
|
||||
static void __exit nortel_pci_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&nortel_pci_driver);
|
||||
ssleep(1);
|
||||
}
|
||||
|
||||
module_init(nortel_pci_init);
|
||||
module_exit(nortel_pci_exit);
|
||||
|
||||
/*
|
||||
* Local variables:
|
||||
* c-indent-level: 8
|
||||
* c-basic-offset: 8
|
||||
* tab-width: 8
|
||||
* End:
|
||||
*/
|
||||
Loading…
Reference in New Issue
Block a user