forked from luck/tmp_suning_uos_patched
ARC: DTB: [scripted] fix node name and address spelling
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ 2. Make all hex addresses lowercase: ----------------------->8------------------------ sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts* sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ Inspired by [1] and the like. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/ Reviewed-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This commit is contained in:
Alexey Brodkin
Vineet Gupta
parent
5908e6b738
commit
ef4c54c340
|
|
@ -38,7 +38,7 @@ ahb_clk: clkdiv_ahb {
|
|||
clock-div = <6>;
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
iomux: iomux@ff10601c {
|
||||
/* Port 1 */
|
||||
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
|
||||
abilis,function = "mis0";
|
||||
|
|
@ -162,182 +162,182 @@ pctl_gpio_i: pctl-gpio-i {
|
|||
};
|
||||
};
|
||||
|
||||
gpioa: gpio@FF140000 {
|
||||
gpioa: gpio@ff140000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF140000 0x1000>;
|
||||
reg = <0xff140000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioa";
|
||||
};
|
||||
gpiob: gpio@FF141000 {
|
||||
gpiob: gpio@ff141000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF141000 0x1000>;
|
||||
reg = <0xff141000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiob";
|
||||
};
|
||||
gpioc: gpio@FF142000 {
|
||||
gpioc: gpio@ff142000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF142000 0x1000>;
|
||||
reg = <0xff142000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioc";
|
||||
};
|
||||
gpiod: gpio@FF143000 {
|
||||
gpiod: gpio@ff143000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF143000 0x1000>;
|
||||
reg = <0xff143000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiod";
|
||||
};
|
||||
gpioe: gpio@FF144000 {
|
||||
gpioe: gpio@ff144000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF144000 0x1000>;
|
||||
reg = <0xff144000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioe";
|
||||
};
|
||||
gpiof: gpio@FF145000 {
|
||||
gpiof: gpio@ff145000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF145000 0x1000>;
|
||||
reg = <0xff145000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiof";
|
||||
};
|
||||
gpiog: gpio@FF146000 {
|
||||
gpiog: gpio@ff146000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF146000 0x1000>;
|
||||
reg = <0xff146000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiog";
|
||||
};
|
||||
gpioh: gpio@FF147000 {
|
||||
gpioh: gpio@ff147000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF147000 0x1000>;
|
||||
reg = <0xff147000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioh";
|
||||
};
|
||||
gpioi: gpio@FF148000 {
|
||||
gpioi: gpio@ff148000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF148000 0x1000>;
|
||||
reg = <0xff148000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <12>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioi";
|
||||
};
|
||||
gpioj: gpio@FF149000 {
|
||||
gpioj: gpio@ff149000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF149000 0x1000>;
|
||||
reg = <0xff149000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <32>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioj";
|
||||
};
|
||||
gpiok: gpio@FF14a000 {
|
||||
gpiok: gpio@ff14a000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14A000 0x1000>;
|
||||
reg = <0xff14a000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <22>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiok";
|
||||
};
|
||||
gpiol: gpio@FF14b000 {
|
||||
gpiol: gpio@ff14b000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14B000 0x1000>;
|
||||
reg = <0xff14b000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <4>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiol";
|
||||
};
|
||||
gpiom: gpio@FF14c000 {
|
||||
gpiom: gpio@ff14c000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14C000 0x1000>;
|
||||
reg = <0xff14c000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <4>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiom";
|
||||
};
|
||||
gpion: gpio@FF14d000 {
|
||||
gpion: gpio@ff14d000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14D000 0x1000>;
|
||||
reg = <0xff14d000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <5>;
|
||||
|
|
|
|||
|
|
@ -37,27 +37,27 @@ memory {
|
|||
};
|
||||
|
||||
soc100 {
|
||||
uart@FF100000 {
|
||||
uart@ff100000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pctl_uart0>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
ethernet@fe100000 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
i2c0: i2c@ff120000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
i2c1: i2c@ff121000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
i2c2: i2c@ff122000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
i2c3: i2c@ff123000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
i2c4: i2c@ff124000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ ahb_clk: clkdiv_ahb {
|
|||
clock-div = <6>;
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
iomux: iomux@ff10601c {
|
||||
/* Port 1 */
|
||||
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
|
||||
abilis,function = "mis0";
|
||||
|
|
@ -171,182 +171,182 @@ pctl_gpio_i: pctl-gpio-i {
|
|||
};
|
||||
};
|
||||
|
||||
gpioa: gpio@FF140000 {
|
||||
gpioa: gpio@ff140000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF140000 0x1000>;
|
||||
reg = <0xff140000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioa";
|
||||
};
|
||||
gpiob: gpio@FF141000 {
|
||||
gpiob: gpio@ff141000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF141000 0x1000>;
|
||||
reg = <0xff141000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiob";
|
||||
};
|
||||
gpioc: gpio@FF142000 {
|
||||
gpioc: gpio@ff142000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF142000 0x1000>;
|
||||
reg = <0xff142000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioc";
|
||||
};
|
||||
gpiod: gpio@FF143000 {
|
||||
gpiod: gpio@ff143000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF143000 0x1000>;
|
||||
reg = <0xff143000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiod";
|
||||
};
|
||||
gpioe: gpio@FF144000 {
|
||||
gpioe: gpio@ff144000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF144000 0x1000>;
|
||||
reg = <0xff144000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioe";
|
||||
};
|
||||
gpiof: gpio@FF145000 {
|
||||
gpiof: gpio@ff145000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF145000 0x1000>;
|
||||
reg = <0xff145000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiof";
|
||||
};
|
||||
gpiog: gpio@FF146000 {
|
||||
gpiog: gpio@ff146000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF146000 0x1000>;
|
||||
reg = <0xff146000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <3>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiog";
|
||||
};
|
||||
gpioh: gpio@FF147000 {
|
||||
gpioh: gpio@ff147000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF147000 0x1000>;
|
||||
reg = <0xff147000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <2>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioh";
|
||||
};
|
||||
gpioi: gpio@FF148000 {
|
||||
gpioi: gpio@ff148000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF148000 0x1000>;
|
||||
reg = <0xff148000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <12>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioi";
|
||||
};
|
||||
gpioj: gpio@FF149000 {
|
||||
gpioj: gpio@ff149000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF149000 0x1000>;
|
||||
reg = <0xff149000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <32>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpioj";
|
||||
};
|
||||
gpiok: gpio@FF14a000 {
|
||||
gpiok: gpio@ff14a000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14A000 0x1000>;
|
||||
reg = <0xff14a000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <22>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiok";
|
||||
};
|
||||
gpiol: gpio@FF14b000 {
|
||||
gpiol: gpio@ff14b000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14B000 0x1000>;
|
||||
reg = <0xff14b000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <4>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiol";
|
||||
};
|
||||
gpiom: gpio@FF14c000 {
|
||||
gpiom: gpio@ff14c000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14C000 0x1000>;
|
||||
reg = <0xff14c000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <4>;
|
||||
gpio-ranges = <&iomux 0 0 0>;
|
||||
gpio-ranges-group-names = "gpiom";
|
||||
};
|
||||
gpion: gpio@FF14d000 {
|
||||
gpion: gpio@ff14d000 {
|
||||
compatible = "abilis,tb10x-gpio";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <27 2>;
|
||||
reg = <0xFF14D000 0x1000>;
|
||||
reg = <0xff14d000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
abilis,ngpio = <5>;
|
||||
|
|
|
|||
|
|
@ -37,27 +37,27 @@ memory {
|
|||
};
|
||||
|
||||
soc100 {
|
||||
uart@FF100000 {
|
||||
uart@ff100000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pctl_uart0>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
ethernet@fe100000 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
i2c0: i2c@ff120000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
i2c1: i2c@ff121000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
i2c2: i2c@ff122000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
i2c3: i2c@ff123000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
i2c4: i2c@ff124000 {
|
||||
i2c-sda-hold-time-ns = <432>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ soc100 {
|
|||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0xfe000000 0xfe000000 0x02000000
|
||||
0x000F0000 0x000F0000 0x00010000>;
|
||||
0x000f0000 0x000f0000 0x00010000>;
|
||||
compatible = "abilis,tb10x", "simple-bus";
|
||||
|
||||
pll0: oscillator {
|
||||
|
|
@ -75,10 +75,10 @@ ahb_clk: clkdiv_ahb {
|
|||
clock-output-names = "ahb_clk";
|
||||
};
|
||||
|
||||
iomux: iomux@FF10601c {
|
||||
iomux: iomux@ff10601c {
|
||||
compatible = "abilis,tb10x-iomux";
|
||||
#gpio-range-cells = <3>;
|
||||
reg = <0xFF10601c 0x4>;
|
||||
reg = <0xff10601c 0x4>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller {
|
||||
|
|
@ -88,7 +88,7 @@ intc: interrupt-controller {
|
|||
};
|
||||
tb10x_ictl: pic@fe002000 {
|
||||
compatible = "abilis,tb10x-ictl";
|
||||
reg = <0xFE002000 0x20>;
|
||||
reg = <0xfe002000 0x20>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&intc>;
|
||||
|
|
@ -96,27 +96,27 @@ tb10x_ictl: pic@fe002000 {
|
|||
20 21 22 23 24 25 26 27 28 29 30 31>;
|
||||
};
|
||||
|
||||
uart@FF100000 {
|
||||
uart@ff100000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0xFF100000 0x100>;
|
||||
reg = <0xff100000 0x100>;
|
||||
clock-frequency = <166666666>;
|
||||
interrupts = <25 8>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
};
|
||||
ethernet@FE100000 {
|
||||
ethernet@fe100000 {
|
||||
compatible = "snps,dwmac-3.70a","snps,dwmac";
|
||||
reg = <0xFE100000 0x1058>;
|
||||
reg = <0xfe100000 0x1058>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <6 8>;
|
||||
interrupt-names = "macirq";
|
||||
clocks = <&ahb_clk>;
|
||||
clock-names = "stmmaceth";
|
||||
};
|
||||
dma@FE000000 {
|
||||
dma@fe000000 {
|
||||
compatible = "snps,dma-spear1340";
|
||||
reg = <0xFE000000 0x400>;
|
||||
reg = <0xfe000000 0x400>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <14 8>;
|
||||
dma-channels = <6>;
|
||||
|
|
@ -132,70 +132,70 @@ dma@FE000000 {
|
|||
multi-block = <1 1 1 1 1 1>;
|
||||
};
|
||||
|
||||
i2c0: i2c@FF120000 {
|
||||
i2c0: i2c@ff120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF120000 0x1000>;
|
||||
reg = <0xff120000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c1: i2c@FF121000 {
|
||||
i2c1: i2c@ff121000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF121000 0x1000>;
|
||||
reg = <0xff121000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c2: i2c@FF122000 {
|
||||
i2c2: i2c@ff122000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF122000 0x1000>;
|
||||
reg = <0xff122000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c3: i2c@FF123000 {
|
||||
i2c3: i2c@ff123000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF123000 0x1000>;
|
||||
reg = <0xff123000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
i2c4: i2c@FF124000 {
|
||||
i2c4: i2c@ff124000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xFF124000 0x1000>;
|
||||
reg = <0xff124000 0x1000>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <12 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
|
||||
spi0: spi@0xFE010000 {
|
||||
spi0: spi@fe010000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "abilis,tb100-spi";
|
||||
num-cs = <1>;
|
||||
reg = <0xFE010000 0x20>;
|
||||
reg = <0xfe010000 0x20>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <26 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
spi1: spi@0xFE011000 {
|
||||
spi1: spi@fe011000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "abilis,tb100-spi";
|
||||
num-cs = <2>;
|
||||
reg = <0xFE011000 0x20>;
|
||||
reg = <0xfe011000 0x20>;
|
||||
interrupt-parent = <&tb10x_ictl>;
|
||||
interrupts = <10 8>;
|
||||
clocks = <&ahb_clk>;
|
||||
|
|
@ -226,23 +226,23 @@ tb10x_stream_proc: tb10x-stream-proc {
|
|||
interrupts = <20 2>, <19 2>;
|
||||
interrupt-names = "cmd_irq", "event_irq";
|
||||
};
|
||||
tb10x_mdsc0: tb10x-mdscr@FF300000 {
|
||||
tb10x_mdsc0: tb10x-mdscr@ff300000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF300000 0x7000>;
|
||||
reg = <0xff300000 0x7000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_mscr0: tb10x-mdscr@FF307000 {
|
||||
tb10x_mscr0: tb10x-mdscr@ff307000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF307000 0x7000>;
|
||||
reg = <0xff307000 0x7000>;
|
||||
};
|
||||
tb10x_scr0: tb10x-mdscr@ff30e000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF30e000 0x4000>;
|
||||
reg = <0xff30e000 0x4000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_scr1: tb10x-mdscr@ff312000 {
|
||||
compatible = "abilis,tb100-mdscr";
|
||||
reg = <0xFF312000 0x4000>;
|
||||
reg = <0xff312000 0x4000>;
|
||||
tb100-mdscr-manage-tsin;
|
||||
};
|
||||
tb10x_wfb: tb10x-wfb@ff319000 {
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ core_intc: arc700-intc@cpu {
|
|||
* this GPIO block ORs all interrupts on CPU card (creg,..)
|
||||
* to uplink only 1 IRQ to ARC core intc
|
||||
*/
|
||||
dw-apb-gpio@0x2000 {
|
||||
dw-apb-gpio@2000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = < 0x2000 0x80 >;
|
||||
#address-cells = <1>;
|
||||
|
|
@ -60,7 +60,7 @@ ictl_intc: gpio-controller@0 {
|
|||
};
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
debug_uart: dw-apb-uart@5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <33333000>;
|
||||
|
|
@ -88,7 +88,7 @@ arcpct0: pct {
|
|||
* avoid duplicating the MB dtsi file given that IRQ from
|
||||
* this intc to cpu intc are different for axs101 and axs103
|
||||
*/
|
||||
mb_intc: dw-apb-ictl@0xe0012000 {
|
||||
mb_intc: dw-apb-ictl@e0012000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0x0 0xe0012000 0x0 0x200 >;
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ core_intc: archs-intc@cpu {
|
|||
* this GPIO block ORs all interrupts on CPU card (creg,..)
|
||||
* to uplink only 1 IRQ to ARC core intc
|
||||
*/
|
||||
dw-apb-gpio@0x2000 {
|
||||
dw-apb-gpio@2000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = < 0x2000 0x80 >;
|
||||
#address-cells = <1>;
|
||||
|
|
@ -74,7 +74,7 @@ ictl_intc: gpio-controller@0 {
|
|||
};
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
debug_uart: dw-apb-uart@5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <33333000>;
|
||||
|
|
@ -102,19 +102,19 @@ arcpct0: pct {
|
|||
* external DMA buffer located outside of IOC aperture.
|
||||
*/
|
||||
axs10x_mb {
|
||||
ethernet@0x18000 {
|
||||
ethernet@18000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
ehci@0x40000 {
|
||||
ehci@40000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
ohci@0x60000 {
|
||||
ohci@60000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
mmc@0x15000 {
|
||||
mmc@15000 {
|
||||
dma-coherent;
|
||||
};
|
||||
};
|
||||
|
|
@ -132,7 +132,7 @@ mmc@0x15000 {
|
|||
* avoid duplicating the MB dtsi file given that IRQ from
|
||||
* this intc to cpu intc are different for axs101 and axs103
|
||||
*/
|
||||
mb_intc: dw-apb-ictl@0xe0012000 {
|
||||
mb_intc: dw-apb-ictl@e0012000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0x0 0xe0012000 0x0 0x200 >;
|
||||
|
|
@ -153,7 +153,7 @@ reserved-memory {
|
|||
#size-cells = <2>;
|
||||
ranges;
|
||||
/*
|
||||
* Move frame buffer out of IOC aperture (0x8z-0xAz).
|
||||
* Move frame buffer out of IOC aperture (0x8z-0xaz).
|
||||
*/
|
||||
frame_buffer: frame_buffer@be000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@ idu_intc: idu-interrupt-controller {
|
|||
* this GPIO block ORs all interrupts on CPU card (creg,..)
|
||||
* to uplink only 1 IRQ to ARC core intc
|
||||
*/
|
||||
dw-apb-gpio@0x2000 {
|
||||
dw-apb-gpio@2000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = < 0x2000 0x80 >;
|
||||
#address-cells = <1>;
|
||||
|
|
@ -81,7 +81,7 @@ ictl_intc: gpio-controller@0 {
|
|||
};
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
debug_uart: dw-apb-uart@5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <33333000>;
|
||||
|
|
@ -109,19 +109,19 @@ arcpct0: pct {
|
|||
* external DMA buffer located outside of IOC aperture.
|
||||
*/
|
||||
axs10x_mb {
|
||||
ethernet@0x18000 {
|
||||
ethernet@18000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
ehci@0x40000 {
|
||||
ehci@40000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
ohci@0x60000 {
|
||||
ohci@60000 {
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
mmc@0x15000 {
|
||||
mmc@15000 {
|
||||
dma-coherent;
|
||||
};
|
||||
};
|
||||
|
|
@ -138,7 +138,7 @@ mmc@0x15000 {
|
|||
* avoid duplicating the MB dtsi file given that IRQ from
|
||||
* this intc to cpu intc are different for axs101 and axs103
|
||||
*/
|
||||
mb_intc: dw-apb-ictl@0xe0012000 {
|
||||
mb_intc: dw-apb-ictl@e0012000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0x0 0xe0012000 0x0 0x200 >;
|
||||
|
|
@ -159,7 +159,7 @@ reserved-memory {
|
|||
#size-cells = <2>;
|
||||
ranges;
|
||||
/*
|
||||
* Move frame buffer out of IOC aperture (0x8z-0xAz).
|
||||
* Move frame buffer out of IOC aperture (0x8z-0xaz).
|
||||
*/
|
||||
frame_buffer: frame_buffer@be000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
|
|
|
|||
|
|
@ -72,7 +72,7 @@ pguclk: pguclk {
|
|||
};
|
||||
};
|
||||
|
||||
gmac: ethernet@0x18000 {
|
||||
gmac: ethernet@18000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dwmac";
|
||||
reg = < 0x18000 0x2000 >;
|
||||
|
|
@ -88,13 +88,13 @@ gmac: ethernet@0x18000 {
|
|||
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
|
||||
};
|
||||
|
||||
ehci@0x40000 {
|
||||
ehci@40000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = < 0x40000 0x100 >;
|
||||
interrupts = < 8 >;
|
||||
};
|
||||
|
||||
ohci@0x60000 {
|
||||
ohci@60000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = < 0x60000 0x100 >;
|
||||
interrupts = < 8 >;
|
||||
|
|
@ -118,7 +118,7 @@ ohci@0x60000 {
|
|||
* dw_mci_pltfm_prepare_command() is used in generic platform
|
||||
* code.
|
||||
*/
|
||||
mmc@0x15000 {
|
||||
mmc@15000 {
|
||||
compatible = "altr,socfpga-dw-mshc";
|
||||
reg = < 0x15000 0x400 >;
|
||||
fifo-depth = < 16 >;
|
||||
|
|
@ -129,7 +129,7 @@ mmc@0x15000 {
|
|||
bus-width = < 4 >;
|
||||
};
|
||||
|
||||
uart@0x20000 {
|
||||
uart@20000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x20000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
|
|
@ -139,7 +139,7 @@ uart@0x20000 {
|
|||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
uart@0x21000 {
|
||||
uart@21000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x21000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
|
|
@ -150,7 +150,7 @@ uart@0x21000 {
|
|||
};
|
||||
|
||||
/* UART muxed with USB data port (ttyS3) */
|
||||
uart@0x22000 {
|
||||
uart@22000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x22000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
|
|
@ -160,7 +160,7 @@ uart@0x22000 {
|
|||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
i2c@0x1d000 {
|
||||
i2c@1d000 {
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0x1d000 0x100>;
|
||||
clock-frequency = <400000>;
|
||||
|
|
@ -177,7 +177,7 @@ i2s: i2s@1e000 {
|
|||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
i2c@0x1f000 {
|
||||
i2c@1f000 {
|
||||
compatible = "snps,designware-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -218,13 +218,13 @@ adv7511_output: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
eeprom@0x54{
|
||||
eeprom@54{
|
||||
compatible = "atmel,24c01";
|
||||
reg = <0x54>;
|
||||
pagesize = <0x8>;
|
||||
};
|
||||
|
||||
eeprom@0x57{
|
||||
eeprom@57{
|
||||
compatible = "atmel,24c04";
|
||||
reg = <0x57>;
|
||||
pagesize = <0x8>;
|
||||
|
|
|
|||
|
|
@ -110,12 +110,12 @@ soc {
|
|||
cgu_rst: reset-controller@8a0 {
|
||||
compatible = "snps,hsdk-reset";
|
||||
#reset-cells = <1>;
|
||||
reg = <0x8A0 0x4>, <0xFF0 0x4>;
|
||||
reg = <0x8a0 0x4>, <0xff0 0x4>;
|
||||
};
|
||||
|
||||
core_clk: core-clk@0 {
|
||||
compatible = "snps,hsdk-core-pll-clock";
|
||||
reg = <0x00 0x10>, <0x14B8 0x4>;
|
||||
reg = <0x00 0x10>, <0x14b8 0x4>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&input_clk>;
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ core_intc: archs-intc@cpu {
|
|||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
debug_uart: dw-apb-uart@5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <2403200>;
|
||||
|
|
@ -49,7 +49,7 @@ debug_uart: dw-apb-uart@0x5000 {
|
|||
|
||||
};
|
||||
|
||||
mb_intc: dw-apb-ictl@0xe0012000 {
|
||||
mb_intc: dw-apb-ictl@e0012000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0xe0012000 0x200 >;
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ idu_intc: idu-interrupt-controller {
|
|||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
debug_uart: dw-apb-uart@5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <2403200>;
|
||||
|
|
@ -57,7 +57,7 @@ debug_uart: dw-apb-uart@0x5000 {
|
|||
|
||||
};
|
||||
|
||||
mb_intc: dw-apb-ictl@0xe0012000 {
|
||||
mb_intc: dw-apb-ictl@e0012000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0xe0012000 0x200 >;
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ pguclk: pguclk {
|
|||
};
|
||||
};
|
||||
|
||||
ethernet@0x18000 {
|
||||
ethernet@18000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dwmac";
|
||||
reg = < 0x18000 0x2000 >;
|
||||
|
|
@ -49,13 +49,13 @@ ethernet@0x18000 {
|
|||
clock-names = "stmmaceth";
|
||||
};
|
||||
|
||||
ehci@0x40000 {
|
||||
ehci@40000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = < 0x40000 0x100 >;
|
||||
interrupts = < 8 >;
|
||||
};
|
||||
|
||||
uart@0x20000 {
|
||||
uart@20000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x20000 0x100>;
|
||||
clock-frequency = <2403200>;
|
||||
|
|
@ -65,7 +65,7 @@ uart@0x20000 {
|
|||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
uart@0x21000 {
|
||||
uart@21000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x21000 0x100>;
|
||||
clock-frequency = <2403200>;
|
||||
|
|
@ -75,7 +75,7 @@ uart@0x21000 {
|
|||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
uart@0x22000 {
|
||||
uart@22000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x22000 0x100>;
|
||||
clock-frequency = <2403200>;
|
||||
|
|
@ -101,7 +101,7 @@ ps2: ps2@e0017400 {
|
|||
interrupt-names = "arc_ps2_irq";
|
||||
};
|
||||
|
||||
mmc@0x15000 {
|
||||
mmc@15000 {
|
||||
compatible = "snps,dw-mshc";
|
||||
reg = <0x15000 0x400>;
|
||||
fifo-depth = <1024>;
|
||||
|
|
@ -117,11 +117,11 @@ mmc@0x15000 {
|
|||
* Embedded Vision subsystem UIO mappings; only relevant for EV VDK
|
||||
*
|
||||
* This node is intentionally put outside of MB above becase
|
||||
* it maps areas outside of MB's 0xEz-0xFz.
|
||||
* it maps areas outside of MB's 0xez-0xfz.
|
||||
*/
|
||||
uio_ev: uio@0xD0000000 {
|
||||
uio_ev: uio@d0000000 {
|
||||
compatible = "generic-uio";
|
||||
reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
|
||||
reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
|
||||
reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
|
||||
interrupt-parent = <&mb_intc>;
|
||||
interrupts = <23>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user