New soc variant the rk3326 which is essentially a px30 with only one

display controller and a new board using it, the Odroid Advance Go.
 sdcard regulator for the rockpro64 and a lot of devicetree fixes
 making the dt-binding check a lot happier.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl7F1N0QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgV34CAChtYhGGRGEr8WwGL3WG1f8z1nwEfxEGaMx
 niLnchgR2kWRiPFV8SVHaNkcGj9+VkeA/F8mCrrKiPDPrsL+s5X6q2liAmEGnIWo
 OvlfyuIJNaSjnVxwhdZABIQsjjeLZI2i0OWGmq47vGopWaNWDGW9wrPlRslPrf4N
 AIww1TwjKYK8Et5ja3COwfSt1gn2/PwR09wTfQwCy7wi9At6UWOQsDmpyFbjuTgv
 GmPcQJZa2YtQovSM5FrbhguCKSGFSukopqqrrxmfsvlkz+xmZyeHN6MMpdNnwBXe
 Kf3VU2p6b+75YouuOcJAAueBj6b37/tvi7KK/MZszdG2pM85SL1z
 =BL2H
 -----END PGP SIGNATURE-----

Merge tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New soc variant the rk3326 which is essentially a px30 with only one
display controller and a new board using it, the Odroid Advance Go.
sdcard regulator for the rockpro64 and a lot of devicetree fixes
making the dt-binding check a lot happier.

* tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
  arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2
  arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399
  arm64: dts: rockchip: add bus-width properties to mmc nodes for px30
  arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node
  arm64: dts: rockchip: rename and label gpio-led subnodes
  arm64: dts: rockchip: fix defines in pd_vio node for rk3399
  arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi
  arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi
  arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4
  arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4
  arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1
  arm64: dts: rockchip: fix phy nodename for rk3328
  include: dt-bindings: rockchip: remove unused defines
  arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2
  arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399
  arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts
  arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts
  arm64: dts: rockchip: add Odroid Advance Go
  dt-bindings: Add binding for Hardkernel Odroid Go Advance
  arm64: dts: rockchip: add core devicetree for rk3326
  ...

Link: https://lore.kernel.org/r/1970481.V9vR1fIhX2@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -358,6 +358,11 @@ properties:
           - const: haoyu,marsboard-rk3066
           - const: rockchip,rk3066a
 
+      - description: Hardkernel Odroid Go Advance
+        items:
+          - const: hardkernel,rk3326-odroid-go2
+          - const: rockchip,rk3326
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99

arch/arm64/boot/dts/rockchip/Makefile

@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -931,6 +931,7 @@ sdmmc: mmc@ff370000 {
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -946,6 +947,7 @@ sdio: mmc@ff380000 {
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -961,6 +963,7 @@ emmc: mmc@ff390000 {
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <8>;
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts

@@ -28,14 +28,14 @@ ir_tx {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			label = "firefly:red:power";
 			linux,default-trigger = "ir-power-click";
 			default-state = "on";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		user {
+		user_led: led-1 {
 			label = "firefly:blue:user";
 			linux,default-trigger = "ir-user-click";
 			default-state = "off";
@@ -123,9 +123,7 @@ &cpu0 {
 };
 
 &emmc {
-	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
@@ -171,7 +169,6 @@ &pwm0 {
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <300>;

arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts

@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		/*
+		 *      *** ODROIDGO2-Advance Switch layout ***
+		 * |------------------------------------------------|
+		 * | sw15                                      sw16 |
+		 * |------------------------------------------------|
+		 * |     sw1      |-------------------|      sw8    |
+		 * |  sw3   sw4   |                   |   sw7   sw5 |
+		 * |     sw2      |    LCD Display    |      sw6    |
+		 * |              |                   |             |
+		 * |              |-------------------|             |
+		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
+		 * |------------------------------------------------|
+		 */
+
+		sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vccsys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "elida,kd35t133";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/rk3326.dtsi

@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;

arch/arm64/boot/dts/rockchip/rk3328-a1.dts

@@ -115,7 +115,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211f: phy@0 {
+		rtl8211f: ethernet-phy@0 {
 			reg = <0>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <30000>;

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts

@@ -86,7 +86,7 @@ vcc_phy: vcc-phy-regulator {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			label = "firefly:blue:power";
 			linux,default-trigger = "heartbeat";
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
@@ -94,7 +94,7 @@ power {
 			mode = <0x23>;
 		};
 
-		user {
+		user_led: led-1 {
 			label = "firefly:yellow:user";
 			linux,default-trigger = "mmc1";
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -73,12 +73,12 @@ ir-receiver {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		standby {
+		standby_led: led-1 {
 			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -936,7 +936,7 @@ mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy: phy@0 {
+			phy: ethernet-phy@0 {
 				compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 				reg = <0>;
 				clocks = <&cru SCLK_MAC2PHY_OUT>;

arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts

@@ -50,13 +50,13 @@ power {
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "geekbox:blue:led";
 			default-state = "on";
 		};
 
-		red {
+		red_led: led-1 {
 			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 			label = "geekbox:red:led";
 			default-state = "off";

arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts

@@ -50,7 +50,7 @@ power {
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		red {
+		red_led: led-0 {
 			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 			label = "orion:red:led";
 			pinctrl-names = "default";
@@ -58,7 +58,7 @@ red {
 			default-state = "on";
 		};
 
-		blue {
+		blue_led: led-1 {
 			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
 			label = "orion:blue:led";
 			pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

@@ -43,7 +43,7 @@ power {
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 			label = "r88:green:led";
 			pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/rk3399-ficus.dts

@@ -27,42 +27,43 @@ clkin_gmac: external-gmac-clock {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
-			    <&user_led4>, <&wlan_led>, <&bt_led>;
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
 
-		user_led1 {
+		user_led1: led-1 {
 			label = "red:user1";
 			gpios = <&gpio4 25 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		user_led2: led-2 {
 			label = "red:user2";
 			gpios = <&gpio4 26 0>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led3 {
+		user_led3: led-3 {
 			label = "red:user3";
 			gpios = <&gpio4 30 0>;
 			linux,default-trigger = "mmc1";
 		};
 
-		user_led4 {
+		user_led4: led-4 {
 			label = "red:user4";
 			gpios = <&gpio1 0 0>;
 			panic-indicator;
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		wlan_active_led: led-5 {
 			label = "red:wlan";
 			gpios = <&gpio1 1 0>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
-		bt_active_led {
+		bt_active_led: led-6 {
 			label = "red:bt";
 			gpios = <&gpio1 4 0>;
 			linux,default-trigger = "hci0-power";
@@ -114,32 +115,32 @@ host_vbus_drv: host-vbus-drv {
 	};
 
 	leds {
-		user_led1: user_led1 {
+		user_led1_pin: user-led1-pin {
 			rockchip,pins =
 				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led2: user_led2 {
+		user_led2_pin: user-led2-pin {
 			rockchip,pins =
 				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led3: user_led3 {
+		user_led3_pin: user-led3-pin {
 			rockchip,pins =
 				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led4: user_led4 {
+		user_led4_pin: user-led4-pin {
 			rockchip,pins =
 				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		wlan_led: wlan_led {
+		wlan_led_pin: wlan-led-pin {
 			rockchip,pins =
 				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_led: bt_led {
+		bt_led_pin: bt-led-pin {
 			rockchip,pins =
 				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -91,15 +91,15 @@ power {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "work";
 			default-state = "on";
 			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "diy";
 			default-state = "off";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -629,11 +629,11 @@ wifi_host_wake_l: wifi-host-wake-l {
 	};
 
 	leds {
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts

@@ -39,9 +39,9 @@ ir-receiver {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&power_led_gpio>;
+		pinctrl-0 = <&power_led_pin>;
 
-		led-0 {
+		power_led: led-0 {
 			label = "blue:power";
 			gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -510,7 +510,7 @@ ir_rx: ir-rx {
 	};
 
 	leds {
-		power_led_gpio: power-led-gpio {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -633,7 +633,6 @@ brcmf: wifi@1 {
 &spdif {
 	status = "okay";
 	pinctrl-0 = <&spdif_bus_1>;
-	#sound-dai-cells = <0>;
 };
 
 &spi1 {

arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

@@ -182,7 +182,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: phy@1 {
+		rtl8211e: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
@@ -525,7 +525,7 @@ leds_gpio: leds-gpio {
 		};
 	};
 
-	phy {
+	gmac {
 		phy_intb: phy-intb {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};

arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts

@@ -214,7 +214,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: phy@1 {
+		rtl8211e: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
@@ -554,7 +554,7 @@ pwr_btn: pwr-btn {
 		};
 	};
 
-	phy {
+	gmac {
 		phy_intb: phy-intb {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts

@@ -90,9 +90,9 @@ power {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+		pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
 
-		green-led {
+		green_led: led-0 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
 			function = LED_FUNCTION_POWER;
@@ -100,7 +100,7 @@ green-led {
 			label = "green:power";
 		};
 
-		red-led {
+		red_led: led-1 {
 			color = <LED_COLOR_ID_RED>;
 			default-state = "off";
 			function = LED_FUNCTION_STANDBY;
@@ -743,7 +743,6 @@ usbc_dp: endpoint {
 };
 
 &i2s1 {
-	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
@@ -825,11 +824,11 @@ lcd_panel_reset_gpio: lcd-panel-reset-gpio {
 	};
 
 	leds {
-		pwrled_gpio: pwrled_gpio {
+		pwr_led_pin: pwr-led-pin {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		slpled_gpio: slpled_gpio {
+		slp_led_pin: slp-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm64/boot/dts/rockchip/rk3399-rock960.dts

@@ -17,42 +17,43 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
-			    <&user_led4>, <&wlan_led>, <&bt_led>;
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
 
-		user_led1 {
+		user_led1: led-1 {
 			label = "green:user1";
 			gpios = <&gpio4 RK_PC2 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		user_led2: led-2 {
 			label = "green:user2";
 			gpios = <&gpio4 RK_PC6 0>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led3 {
+		user_led3: led-3 {
 			label = "green:user3";
 			gpios = <&gpio4 RK_PD0 0>;
 			linux,default-trigger = "mmc1";
 		};
 
-		user_led4 {
+		user_led4: led-4 {
 			label = "green:user4";
 			gpios = <&gpio4 RK_PD4 0>;
 			panic-indicator;
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		wlan_active_led: led-5 {
 			label = "yellow:wlan";
 			gpios = <&gpio4 RK_PD5 0>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
-		bt_active_led {
+		bt_active_led: led-6 {
 			label = "blue:bt";
 			gpios = <&gpio4 RK_PD6 0>;
 			linux,default-trigger = "hci0-power";
@@ -68,32 +69,32 @@ &pcie0 {
 
 &pinctrl {
 	leds {
-		user_led1: user_led1 {
+		user_led1_pin: user-led1-pin {
 			rockchip,pins =
 				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led2: user_led2 {
+		user_led2_pin: user-led2-pin {
 			rockchip,pins =
 				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led3: user_led3 {
+		user_led3_pin: user-led3-pin {
 			rockchip,pins =
 				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led4: user_led4 {
+		user_led4_pin: user-led4-pin {
 			rockchip,pins =
 				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		wlan_led: wlan_led {
+		wlan_led_pin: wlan-led-pin {
 			rockchip,pins =
 				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_led: bt_led {
+		bt_led_pin: bt-led-pin {
 			rockchip,pins =
 				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi

@@ -96,6 +96,24 @@ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		vin-supply = <&vcc_1v8>;
 	};
 
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -603,6 +621,13 @@ vsel2_gpio: vsel2-gpio {
 		};
 	};
 
+	sdcard {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -661,6 +686,8 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1056,6 +1056,16 @@ pd_sdioaudio@RK3399_PD_SDIOAUDIO {
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
 			};
+			pd_tcpc0@RK3399_PD_TCPD0 {
+				reg = <RK3399_PD_TCPD0>;
+				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+			};
+			pd_tcpc1@RK3399_PD_TCPD1 {
+				reg = <RK3399_PD_TCPD1>;
+				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+			};
 			pd_usb3@RK3399_PD_USB3 {
 				reg = <RK3399_PD_USB3>;
 				clocks = <&cru ACLK_USB3>;
@@ -1088,16 +1098,6 @@ pd_isp1@RK3399_PD_ISP1 {
 					pm_qos = <&qos_isp1_m0>,
 						 <&qos_isp1_m1>;
 				};
-				pd_tcpc0@RK3399_PD_TCPC0 {
-					reg = <RK3399_PD_TCPD0>;
-					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
-						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
-				};
-				pd_tcpc1@RK3399_PD_TCPC1 {
-					reg = <RK3399_PD_TCPD1>;
-					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
-						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
-				};
 				pd_vo@RK3399_PD_VO {
 					reg = <RK3399_PD_VO>;
 					#address-cells = <1>;
@@ -1271,6 +1271,18 @@ vpu_mmu: iommu@ff650800 {
 		power-domains = <&power RK3399_PD_VCODEC>;
 	};
 
+	vdec: video-codec@ff660000 {
+		compatible = "rockchip,rk3399-vdec";
+		reg = <0x0 0xff660000 0x0 0x400>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vdpu";
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3399_PD_VDU>;
+	};
+
 	vdec_mmu: iommu@ff660480 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
@@ -1278,8 +1290,8 @@ vdec_mmu: iommu@ff660480 {
 		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
 		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VDU>;
 		#iommu-cells = <0>;
-		status = "disabled";
 	};
 
 	iep_mmu: iommu@ff670800 {

include/dt-bindings/pinctrl/rockchip.h

@@ -9,13 +9,6 @@
 #ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
 #define __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
 
-#define RK_GPIO0	0
-#define RK_GPIO1	1
-#define RK_GPIO2	2
-#define RK_GPIO3	3
-#define RK_GPIO4	4
-#define RK_GPIO6	6
-
 #define RK_PA0		0
 #define RK_PA1		1
 #define RK_PA2		2
@@ -50,9 +43,5 @@
 #define RK_PD7		31
 
 #define RK_FUNC_GPIO	0
-#define RK_FUNC_1	1 /* deprecated */
-#define RK_FUNC_2	2 /* deprecated */
-#define RK_FUNC_3	3 /* deprecated */
-#define RK_FUNC_4	4 /* deprecated */
 
 #endif