AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

bnx2: Reinsert VLAN tag when necessary.

Browse Source 
In certain cases when ASF or other management firmware is running, the
chip may be configured to always strip out the VLAN tag even when
VLAN acceleration is not enabled.  This causes some VLAN tagged
packets to be received by the host stack without any knowledge that
the original packet was VLAN tagged.

We fix this by re-inserting the VLAN tag into the packet when necessary.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan 2008-08-14 15:30:14 -07:00 committed by David S. Miller
parent 729b85cd47
commit f22828e89f
1 changed files with 27 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
drivers/net/bnx2.c
View File

@ -2876,6 +2876,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
struct sw_bd *rx_buf;
struct sk_buff *skb;
dma_addr_t dma_addr;
u16 vtag = 0;
int hw_vlan __maybe_unused = 0;
sw_ring_cons = RX_RING_IDX(sw_cons);
sw_ring_prod = RX_RING_IDX(sw_prod);
@ -2919,7 +2921,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
if (len <= bp->rx_copy_thresh) {
struct sk_buff *new_skb;
new_skb = netdev_alloc_skb(bp->dev, len + 2);
new_skb = netdev_alloc_skb(bp->dev, len + 6);
if (new_skb == NULL) {
bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
sw_ring_prod);
@ -2928,9 +2930,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
/* aligned copy */
skb_copy_from_linear_data_offset(skb,
BNX2_RX_OFFSET - 2,
new_skb->data, len + 2);
skb_reserve(new_skb, 2);
BNX2_RX_OFFSET - 6,
new_skb->data, len + 6);
skb_reserve(new_skb, 6);
skb_put(new_skb, len);
bnx2_reuse_rx_skb(bp, rxr, skb,
@ -2941,6 +2943,25 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
goto next_rx;
if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
!(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
vtag = rx_hdr->l2_fhdr_vlan_tag;
#ifdef BCM_VLAN
if (bp->vlgrp)
hw_vlan = 1;
else
#endif
{
struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
__skb_push(skb, 4);
memmove(ve, skb->data + 4, ETH_ALEN * 2);
ve->h_vlan_proto = htons(ETH_P_8021Q);
ve->h_vlan_TCI = htons(vtag);
len += 4;
}
}
skb->protocol = eth_type_trans(skb, bp->dev);
if ((len > (bp->dev->mtu + ETH_HLEN)) &&
@ -2962,10 +2983,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
}
#ifdef BCM_VLAN
if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
vlan_hwaccel_receive_skb(skb, bp->vlgrp,
rx_hdr->l2_fhdr_vlan_tag);
}
if (hw_vlan)
vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
else
#endif
netif_receive_skb(skb);