AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Documentation: gpio: driver: fix wire name for I2C

Browse Source 
Typo: the data line is called "SDA" not "SCA".

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This commit is contained in:
Wolfram Sang 2019-01-17 11:13:21 +01:00 committed by Bartosz Golaszewski
parent 0faf40e373
commit f3463daab2
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/driver-api/gpio/driver.rst
View File

@ -135,7 +135,7 @@ This configuration is normally used as a way to achieve one of two things:
- inverse wire-OR on an I/O line, for example a GPIO line, making it possible
for any driving stage on the line to drive it low even if any other output
to the same line is simultaneously driving it high. A special case of this
is driving the SCL and SCA lines of an I2C bus, which is by definition a
is driving the SCL and SDA lines of an I2C bus, which is by definition a
wire-OR bus.
Both usecases require that the line be equipped with a pull-up resistor. This