forked from luck/tmp_suning_uos_patched
i2c-designware: Push all register reads/writes into the core code.
Move all register manipulation code into the core, also move register offset definitions to i2c-designware-core.c since the bus specific portions of the driver no longer need/use them. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Dirk Brandewie
Ben Dooks
parent
af06cf6c8c
commit
f3fa9f3da5
|
|
@ -34,6 +34,108 @@
|
|||
#include <linux/delay.h>
|
||||
#include "i2c-designware-core.h"
|
||||
|
||||
/*
|
||||
* Registers offset
|
||||
*/
|
||||
#define DW_IC_CON 0x0
|
||||
#define DW_IC_TAR 0x4
|
||||
#define DW_IC_DATA_CMD 0x10
|
||||
#define DW_IC_SS_SCL_HCNT 0x14
|
||||
#define DW_IC_SS_SCL_LCNT 0x18
|
||||
#define DW_IC_FS_SCL_HCNT 0x1c
|
||||
#define DW_IC_FS_SCL_LCNT 0x20
|
||||
#define DW_IC_INTR_STAT 0x2c
|
||||
#define DW_IC_INTR_MASK 0x30
|
||||
#define DW_IC_RAW_INTR_STAT 0x34
|
||||
#define DW_IC_RX_TL 0x38
|
||||
#define DW_IC_TX_TL 0x3c
|
||||
#define DW_IC_CLR_INTR 0x40
|
||||
#define DW_IC_CLR_RX_UNDER 0x44
|
||||
#define DW_IC_CLR_RX_OVER 0x48
|
||||
#define DW_IC_CLR_TX_OVER 0x4c
|
||||
#define DW_IC_CLR_RD_REQ 0x50
|
||||
#define DW_IC_CLR_TX_ABRT 0x54
|
||||
#define DW_IC_CLR_RX_DONE 0x58
|
||||
#define DW_IC_CLR_ACTIVITY 0x5c
|
||||
#define DW_IC_CLR_STOP_DET 0x60
|
||||
#define DW_IC_CLR_START_DET 0x64
|
||||
#define DW_IC_CLR_GEN_CALL 0x68
|
||||
#define DW_IC_ENABLE 0x6c
|
||||
#define DW_IC_STATUS 0x70
|
||||
#define DW_IC_TXFLR 0x74
|
||||
#define DW_IC_RXFLR 0x78
|
||||
#define DW_IC_TX_ABRT_SOURCE 0x80
|
||||
#define DW_IC_COMP_PARAM_1 0xf4
|
||||
#define DW_IC_COMP_TYPE 0xfc
|
||||
#define DW_IC_COMP_TYPE_VALUE 0x44570140
|
||||
|
||||
#define DW_IC_INTR_RX_UNDER 0x001
|
||||
#define DW_IC_INTR_RX_OVER 0x002
|
||||
#define DW_IC_INTR_RX_FULL 0x004
|
||||
#define DW_IC_INTR_TX_OVER 0x008
|
||||
#define DW_IC_INTR_TX_EMPTY 0x010
|
||||
#define DW_IC_INTR_RD_REQ 0x020
|
||||
#define DW_IC_INTR_TX_ABRT 0x040
|
||||
#define DW_IC_INTR_RX_DONE 0x080
|
||||
#define DW_IC_INTR_ACTIVITY 0x100
|
||||
#define DW_IC_INTR_STOP_DET 0x200
|
||||
#define DW_IC_INTR_START_DET 0x400
|
||||
#define DW_IC_INTR_GEN_CALL 0x800
|
||||
|
||||
#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
|
||||
DW_IC_INTR_TX_EMPTY | \
|
||||
DW_IC_INTR_TX_ABRT | \
|
||||
DW_IC_INTR_STOP_DET)
|
||||
|
||||
#define DW_IC_STATUS_ACTIVITY 0x1
|
||||
|
||||
#define DW_IC_ERR_TX_ABRT 0x1
|
||||
|
||||
/*
|
||||
* status codes
|
||||
*/
|
||||
#define STATUS_IDLE 0x0
|
||||
#define STATUS_WRITE_IN_PROGRESS 0x1
|
||||
#define STATUS_READ_IN_PROGRESS 0x2
|
||||
|
||||
#define TIMEOUT 20 /* ms */
|
||||
|
||||
/*
|
||||
* hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
|
||||
*
|
||||
* only expected abort codes are listed here
|
||||
* refer to the datasheet for the full list
|
||||
*/
|
||||
#define ABRT_7B_ADDR_NOACK 0
|
||||
#define ABRT_10ADDR1_NOACK 1
|
||||
#define ABRT_10ADDR2_NOACK 2
|
||||
#define ABRT_TXDATA_NOACK 3
|
||||
#define ABRT_GCALL_NOACK 4
|
||||
#define ABRT_GCALL_READ 5
|
||||
#define ABRT_SBYTE_ACKDET 7
|
||||
#define ABRT_SBYTE_NORSTRT 9
|
||||
#define ABRT_10B_RD_NORSTRT 10
|
||||
#define ABRT_MASTER_DIS 11
|
||||
#define ARB_LOST 12
|
||||
|
||||
#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
|
||||
#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
|
||||
#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
|
||||
#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
|
||||
#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
|
||||
#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
|
||||
#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
|
||||
#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
|
||||
#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
|
||||
#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
|
||||
#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
|
||||
|
||||
#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
|
||||
DW_IC_TX_ABRT_10ADDR1_NOACK | \
|
||||
DW_IC_TX_ABRT_10ADDR2_NOACK | \
|
||||
DW_IC_TX_ABRT_TXDATA_NOACK | \
|
||||
DW_IC_TX_ABRT_GCALL_NOACK)
|
||||
|
||||
static char *abort_sources[] = {
|
||||
[ABRT_7B_ADDR_NOACK] =
|
||||
"slave address not acknowledged (7bit mode)",
|
||||
|
|
@ -562,3 +664,36 @@ irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
|
|||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
void i2c_dw_enable(struct dw_i2c_dev *dev)
|
||||
{
|
||||
/* Enable the adapter */
|
||||
dw_writel(dev, 1, DW_IC_ENABLE);
|
||||
}
|
||||
|
||||
void i2c_dw_disable(struct dw_i2c_dev *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Disable controller */
|
||||
dw_writel(dev, 0, DW_IC_ENABLE);
|
||||
|
||||
/* Disable all interupts */
|
||||
dw_writel(dev, 0, DW_IC_INTR_MASK);
|
||||
dw_readl(dev, DW_IC_CLR_INTR);
|
||||
}
|
||||
|
||||
void i2c_dw_clear_int(struct dw_i2c_dev *dev)
|
||||
{
|
||||
dw_readl(dev, DW_IC_CLR_INTR);
|
||||
}
|
||||
|
||||
void i2c_dw_disable_int(struct dw_i2c_dev *dev)
|
||||
{
|
||||
dw_writel(dev, 0, DW_IC_INTR_MASK);
|
||||
}
|
||||
|
||||
u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
|
||||
{
|
||||
return dw_readl(dev, DW_IC_COMP_PARAM_1);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -26,40 +26,6 @@
|
|||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Registers offset
|
||||
*/
|
||||
#define DW_IC_CON 0x0
|
||||
#define DW_IC_TAR 0x4
|
||||
#define DW_IC_DATA_CMD 0x10
|
||||
#define DW_IC_SS_SCL_HCNT 0x14
|
||||
#define DW_IC_SS_SCL_LCNT 0x18
|
||||
#define DW_IC_FS_SCL_HCNT 0x1c
|
||||
#define DW_IC_FS_SCL_LCNT 0x20
|
||||
#define DW_IC_INTR_STAT 0x2c
|
||||
#define DW_IC_INTR_MASK 0x30
|
||||
#define DW_IC_RAW_INTR_STAT 0x34
|
||||
#define DW_IC_RX_TL 0x38
|
||||
#define DW_IC_TX_TL 0x3c
|
||||
#define DW_IC_CLR_INTR 0x40
|
||||
#define DW_IC_CLR_RX_UNDER 0x44
|
||||
#define DW_IC_CLR_RX_OVER 0x48
|
||||
#define DW_IC_CLR_TX_OVER 0x4c
|
||||
#define DW_IC_CLR_RD_REQ 0x50
|
||||
#define DW_IC_CLR_TX_ABRT 0x54
|
||||
#define DW_IC_CLR_RX_DONE 0x58
|
||||
#define DW_IC_CLR_ACTIVITY 0x5c
|
||||
#define DW_IC_CLR_STOP_DET 0x60
|
||||
#define DW_IC_CLR_START_DET 0x64
|
||||
#define DW_IC_CLR_GEN_CALL 0x68
|
||||
#define DW_IC_ENABLE 0x6c
|
||||
#define DW_IC_STATUS 0x70
|
||||
#define DW_IC_TXFLR 0x74
|
||||
#define DW_IC_RXFLR 0x78
|
||||
#define DW_IC_TX_ABRT_SOURCE 0x80
|
||||
#define DW_IC_COMP_PARAM_1 0xf4
|
||||
#define DW_IC_COMP_TYPE 0xfc
|
||||
#define DW_IC_COMP_TYPE_VALUE 0x44570140
|
||||
|
||||
#define DW_IC_CON_MASTER 0x1
|
||||
#define DW_IC_CON_SPEED_STD 0x2
|
||||
|
|
@ -68,72 +34,7 @@
|
|||
#define DW_IC_CON_RESTART_EN 0x20
|
||||
#define DW_IC_CON_SLAVE_DISABLE 0x40
|
||||
|
||||
#define DW_IC_INTR_RX_UNDER 0x001
|
||||
#define DW_IC_INTR_RX_OVER 0x002
|
||||
#define DW_IC_INTR_RX_FULL 0x004
|
||||
#define DW_IC_INTR_TX_OVER 0x008
|
||||
#define DW_IC_INTR_TX_EMPTY 0x010
|
||||
#define DW_IC_INTR_RD_REQ 0x020
|
||||
#define DW_IC_INTR_TX_ABRT 0x040
|
||||
#define DW_IC_INTR_RX_DONE 0x080
|
||||
#define DW_IC_INTR_ACTIVITY 0x100
|
||||
#define DW_IC_INTR_STOP_DET 0x200
|
||||
#define DW_IC_INTR_START_DET 0x400
|
||||
#define DW_IC_INTR_GEN_CALL 0x800
|
||||
|
||||
#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
|
||||
DW_IC_INTR_TX_EMPTY | \
|
||||
DW_IC_INTR_TX_ABRT | \
|
||||
DW_IC_INTR_STOP_DET)
|
||||
|
||||
#define DW_IC_STATUS_ACTIVITY 0x1
|
||||
|
||||
#define DW_IC_ERR_TX_ABRT 0x1
|
||||
|
||||
/*
|
||||
* status codes
|
||||
*/
|
||||
#define STATUS_IDLE 0x0
|
||||
#define STATUS_WRITE_IN_PROGRESS 0x1
|
||||
#define STATUS_READ_IN_PROGRESS 0x2
|
||||
|
||||
#define TIMEOUT 20 /* ms */
|
||||
|
||||
/*
|
||||
* hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
|
||||
*
|
||||
* only expected abort codes are listed here
|
||||
* refer to the datasheet for the full list
|
||||
*/
|
||||
#define ABRT_7B_ADDR_NOACK 0
|
||||
#define ABRT_10ADDR1_NOACK 1
|
||||
#define ABRT_10ADDR2_NOACK 2
|
||||
#define ABRT_TXDATA_NOACK 3
|
||||
#define ABRT_GCALL_NOACK 4
|
||||
#define ABRT_GCALL_READ 5
|
||||
#define ABRT_SBYTE_ACKDET 7
|
||||
#define ABRT_SBYTE_NORSTRT 9
|
||||
#define ABRT_10B_RD_NORSTRT 10
|
||||
#define ABRT_MASTER_DIS 11
|
||||
#define ARB_LOST 12
|
||||
|
||||
#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
|
||||
#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
|
||||
#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
|
||||
#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
|
||||
#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
|
||||
#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
|
||||
#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
|
||||
#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
|
||||
#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
|
||||
#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
|
||||
#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
|
||||
|
||||
#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
|
||||
DW_IC_TX_ABRT_10ADDR1_NOACK | \
|
||||
DW_IC_TX_ABRT_10ADDR2_NOACK | \
|
||||
DW_IC_TX_ABRT_TXDATA_NOACK | \
|
||||
DW_IC_TX_ABRT_GCALL_NOACK)
|
||||
/**
|
||||
* struct dw_i2c_dev - private i2c-designware data
|
||||
* @dev: driver model device node
|
||||
|
|
@ -195,3 +96,8 @@ extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
|
|||
int num);
|
||||
extern u32 i2c_dw_func(struct i2c_adapter *adap);
|
||||
extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id);
|
||||
extern void i2c_dw_enable(struct dw_i2c_dev *dev);
|
||||
extern void i2c_dw_disable(struct dw_i2c_dev *dev);
|
||||
extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
|
||||
extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
|
||||
extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
|
||||
|
|
|
|||
|
|
@ -113,7 +113,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
|
|||
goto err_unuse_clocks;
|
||||
}
|
||||
{
|
||||
u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
|
||||
u32 param1 = i2c_dw_read_comp_param(dev);
|
||||
|
||||
dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
|
||||
dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
|
||||
|
|
@ -122,7 +122,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
|
|||
if (r)
|
||||
goto err_iounmap;
|
||||
|
||||
dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */
|
||||
i2c_dw_disable_int(dev);
|
||||
r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
|
||||
|
|
@ -178,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
|
|||
clk_put(dev->clk);
|
||||
dev->clk = NULL;
|
||||
|
||||
dw_writel(dev, 0, DW_IC_ENABLE);
|
||||
i2c_dw_disable(dev);
|
||||
free_irq(dev->irq, dev);
|
||||
kfree(dev);
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user