AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

can: sja1000: fix define conflict on SH

Browse Source 
Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:

    drivers/net/can/sja1000/sja1000.h:59:0: warning:
        "REG_SR" redefined [enabled by default]
    arch/sh/include/asm/ptrace_32.h:25:0: note:
         this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.

Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Marc Kleine-Budde 2013-03-27 11:36:42 +01:00
parent b175293ccc
commit f901b6bc40
3 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/net/can/sja1000/plx_pci.c
View File

@ -348,7 +348,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
(priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
@ -360,7 +360,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;

6
drivers/net/can/sja1000/sja1000.c
View File

@ -92,7 +92,7 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
priv->read_reg(priv, REG_SR);
priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
@ -502,7 +502,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
status = priv->read_reg(priv, REG_SR);
status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
@ -530,7 +530,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
status = priv->read_reg(priv, REG_SR);
status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;

2
drivers/net/can/sja1000/sja1000.h
View File

@ -56,7 +56,7 @@
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
#define REG_SR 0x02
#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B