Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] clps711x: add sparsemem definitions [ARM] 5315/1: Fix section mismatch warning (sa1111) [ARM] Orion: activate workaround for 88f6183 SPI clock erratum [ARM] Orion: instantiate the dsa switch driver [ARM] mv78xx0: force link speed/duplex on eth2/eth3 [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c [ARM] balance parenthesis in header file [ARM] pxa: fix trizeps PCMCIA build [ARM] pxa: fix trizeps defconfig [ARM] dmabounce requires ZONE_DMA [ARM] 5303/1: period_cycles should be greater than 1 [ARM] 5310/1: Fix cache flush functions for ARMv4 [ARM] pxa: fix 3bca103a1e [ARM] pxa: fix redefinition of NR_IRQS [ARM] S3C24XX: Fix redefine of DEFINE_TIMER() in s3c24xx pwm-clock.c [ARM] S3C2443: Fix HCLK rate [ARM] S3C24XX: Serial driver debug depends on DEBUG_LL [ARM] S3C24XX: pwm-clock set_parent mask fix
2008-10-23 08:12:21 -07:00 · 2008-10-23 08:12:21 -07:00 · fdc76bf9b6
commit fdc76bf9b6
parent 72441bdc76 f6335c43f3
27 changed files with 164 additions and 28 deletions
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -356,7 +356,7 @@ config ARCH_IXP4XX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ZONE_DMA if PCI
+	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.

--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@ -13,10 +13,10 @@ config ICST307
 config SA1111
 	bool
 	select DMABOUNCE if !ARCH_PXA
-	select ZONE_DMA if !ARCH_PXA

 config DMABOUNCE
 	bool
+	select ZONE_DMA

 config TIMER_ACORN
 	bool
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@ -581,6 +581,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}

+#ifdef CONFIG_DMABOUNCE
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@ -598,6 +599,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 			}
 		}
 	}
+#endif

 out:
 	return ret;
@ -937,7 +939,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif

-static int sa1111_probe(struct platform_device *pdev)
+static int __devinit sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@ -147,6 +147,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
 CONFIG_MACH_TRIZEPS4_CONXS=y
 # CONFIG_MACH_TRIZEPS4_ANY is not set
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@ -89,6 +89,8 @@
 * 	node 3:  0xd8000000 - 0xdfffffff
 */
 #define NODE_MEM_SIZE_BITS	24
+#define SECTION_SIZE_BITS	24
+#define MAX_PHYSMEM_BITS	32

 #endif

--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@ -167,11 +167,6 @@ config MACH_GTWX5715

 comment "IXP4xx Options"

-config DMABOUNCE
-	bool
-	default y
-	depends on PCI
-
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
 	depends on PCI
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
@ -151,6 +152,40 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 }


+/*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource kirkwood_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= kirkwood_switch_resources,
+};
+
+void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		kirkwood_switch_resources[0].start = irq;
+		kirkwood_switch_resources[0].end = irq;
+		kirkwood_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &kirkwood_ge00_shared.dev;
+	d->netdev = &kirkwood_ge00.dev;
+	kirkwood_switch_device.dev.platform_data = d;
+
+	platform_device_register(&kirkwood_switch_device);
+}
+
+
 /*****************************************************************************
 * SoC RTC
 ****************************************************************************/
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@ -11,6 +11,7 @@
 #ifndef __ARCH_KIRKWOOD_COMMON_H
 #define __ARCH_KIRKWOOD_COMMON_H

+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;

@ -29,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev);

 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@ -19,6 +19,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@ -74,6 +75,15 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.duplex		= DUPLEX_FULL,
 };

+static struct dsa_platform_data rd88f6281_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
@ -87,6 +97,7 @@ static void __init rd88f6281_init(void)

 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@ -28,10 +29,14 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = {

 static struct mv643xx_eth_platform_data db78x00_ge10_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };

 static struct mv643xx_eth_platform_data db78x00_ge11_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };

 static struct mv_sata_platform_data db78x00_sata_data = {
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@ -19,6 +19,7 @@
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@ -197,6 +198,40 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 }


+/*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+static struct resource orion5x_switch_resources[] = {
+	{
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.resource	= orion5x_switch_resources,
+};
+
+void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
+{
+	if (irq != NO_IRQ) {
+		orion5x_switch_resources[0].start = irq;
+		orion5x_switch_resources[0].end = irq;
+		orion5x_switch_device.num_resources = 1;
+	}
+
+	d->mii_bus = &orion5x_eth_shared.dev;
+	d->netdev = &orion5x_eth.dev;
+	orion5x_switch_device.dev.platform_data = d;
+
+	platform_device_register(&orion5x_switch_device);
+}
+
+
 /*****************************************************************************
 * I2C
 ****************************************************************************/
@ -275,7 +310,8 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
 * SPI
 ****************************************************************************/
 static struct orion_spi_info orion5x_spi_plat_data = {
-	.tclk		= 0,
+	.tclk			= 0,
+	.enable_clock_fix	= 1,
 };

 static struct resource orion5x_spi_resources[] = {
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@ -1,6 +1,7 @@
 #ifndef __ARCH_ORION5X_COMMON_H
 #define __ARCH_ORION5X_COMMON_H

+struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;

@ -29,6 +30,7 @@ void orion5x_setup_pcie_wa_win(u32 base, u32 size);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@ -16,6 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@ -93,6 +94,15 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };

+static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@ -107,6 +117,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
 	orion5x_uart0_init();

 	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@ -17,6 +17,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@ -94,6 +95,15 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };

+static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@ -112,6 +122,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
 	orion5x_i2c_init();
 	orion5x_uart0_init();

--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@ -19,6 +19,7 @@
 #include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@ -34,6 +35,15 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };

+static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@ -79,6 +89,7 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@ -105,6 +106,15 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };

+static struct dsa_platform_data wrt350n_v2_switch_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan3",
+	.port_names[7]	= "lan4",
+};
+
 static void __init wrt350n_v2_init(void)
 {
 	/*
@ -119,6 +129,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
 	orion5x_uart0_init();

 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@ -257,7 +257,6 @@ config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select PXA27x
 	select IWMMXT
-	select ZONE_DMA if PCI
 	select PXA25x
 	select PXA_SSP

--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@ -9,7 +9,8 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H

 #ifdef CONFIG_PXA_HAVE_ISA_IRQS
 #define PXA_ISA_IRQ(x)	(x)
@ -264,3 +265,5 @@
 #endif

 #endif /* CONFIG_PCI_HOST_ITE8152 */
+
+#endif /* __ASM_MACH_IRQS_H */
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@ -142,7 +142,7 @@

 #define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
 #define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
-#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
 #define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
 #define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
 #define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@ -60,7 +60,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	do_div(c, 1000000000);
 	period_cycles = c;

-	if (period_cycles < 0)
+	if (period_cycles < 1)
 		period_cycles = 1;
 	prescale = (period_cycles - 1) / 1024;
 	pv = period_cycles / (prescale + 1) - 1;
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@ -399,7 +399,7 @@ static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 	/* Switch mode */
 	if (mode & IR_SIRMODE)
 		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE) {
+	else if (mode & IR_FIRMODE)
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */

 	/* Switch power */
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@ -1033,8 +1033,7 @@ void __init s3c2443_init_clocks(int xtal)

 	fclk = pll / s3c2443_fclk_div(clkdiv0);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk = hclk / s3c2443_get_hdiv(clkdiv0);
-	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);

 	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@ -29,7 +29,7 @@ ENTRY(v4_flush_user_cache_all)
 *	Clean and invalidate the entire cache.
 */
 ENTRY(v4_flush_kern_cache_all)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@ -48,7 +48,7 @@ ENTRY(v4_flush_kern_cache_all)
 *	- flags	- vma_area_struct flags describing address space
 */
 ENTRY(v4_flush_user_cache_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	ip, #0
 	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
@ -116,7 +116,7 @@ ENTRY(v4_dma_inv_range)
 *	- end	 - virtual end address
 */
 ENTRY(v4_dma_flush_range)
-#ifdef CPU_CP15
+#ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 #endif
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@ -315,7 +315,7 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	if (parent == s3c24xx_pwmclk_tclk(id))
 		bits = S3C2410_TCFG1_MUX_TCLK << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift;
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
 		return -EINVAL;

--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@ -56,7 +56,7 @@ static struct clk *clk_scaler[2];
 		}					\
 	}

-#define DEFINE_TIMER(_tmr_no, _irq)			\
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
 	.name		= "s3c24xx-pwm",		\
 	.id		= _tmr_no,			\
 	.num_resources	= TIMER_RESOURCE_SIZE,		\
@ -67,11 +67,11 @@ static struct clk *clk_scaler[2];
 */

 struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_TIMER(4, IRQ_TIMER4) },
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
 };

 static inline int pwm_is_tdiv(struct pwm_device *pwm)
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@ -70,7 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
 pxa2xx-obj-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x2xx_cs.o
 pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
-pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps.o
+pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o

--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@ -457,7 +457,7 @@ config SERIAL_SAMSUNG

 config SERIAL_SAMSUNG_DEBUG
 	bool "Samsung SoC serial debug"
-	depends on SERIAL_SAMSUNG
+	depends on SERIAL_SAMSUNG && DEBUG_LL
 	help
 	  Add support for debugging the serial driver. Since this is
 	  generally being used as a console, we use our own output