AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

usb: gadget: storage: fix mass storage gadgets to work with Synopsys UDC

Browse Source 
The Synopsys USB device controller requires all OUT transfer request
lengths to be aligned to max packet size. The mass storage gadgets do
not meet this requirement for Super Speed. The gadgets already have a
function which performs this alignment for CBW packets, so use it for
data packets too.

The alternative would be to implement bounce buffers in the DWC3
driver, but that could have a significant impact on performance.

This version is based upon a more-correct patch written by Alan
Stern.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Paul Zimmerman 2011-09-30 15:26:06 -07:00 committed by Felipe Balbi
parent c8933c3f79
commit fe69676530
2 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/usb/gadget/f_mass_storage.c
View File

@ -958,9 +958,7 @@ static int do_write(struct fsg_common *common)
* equal to the buffer size, which is divisible by
* the bulk-out maxpacket size.
*/
bh->outreq->length = amount;
bh->bulk_out_intended_length = amount;
bh->outreq->short_not_ok = 1;
set_bulk_out_req_length(common, bh, amount);
if (!start_out_transfer(common, bh))
/* Dunno what to do if common->fsg is NULL */
return -EIO;
@ -995,6 +993,11 @@ static int do_write(struct fsg_common *common)
amount = curlun->file_length - file_offset;
}
/* Don't accept excess data. The spec doesn't say
* what to do in this case. We'll ignore the error.
*/
amount = min(amount, bh->bulk_out_intended_length);
/* Don't write a partial block */
amount = round_down(amount, curlun->blksize);
if (amount == 0)
@ -1034,7 +1037,7 @@ static int do_write(struct fsg_common *common)
empty_write:
/* Did the host decide to stop early? */
if (bh->outreq->actual != bh->outreq->length) {
if (bh->outreq->actual < bh->bulk_out_intended_length) {
common->short_packet_received = 1;
break;
}
@ -1592,7 +1595,7 @@ static int throw_away_data(struct fsg_common *common)
common->next_buffhd_to_drain = bh->next;
/* A short packet or an error ends everything */
if (bh->outreq->actual != bh->outreq->length ||
if (bh->outreq->actual < bh->bulk_out_intended_length ||
bh->outreq->status != 0) {
raise_exception(common,
FSG_STATE_ABORT_BULK_OUT);
@ -1612,9 +1615,7 @@ static int throw_away_data(struct fsg_common *common)
* equal to the buffer size, which is divisible by
* the bulk-out maxpacket size.
*/
bh->outreq->length = amount;
bh->bulk_out_intended_length = amount;
bh->outreq->short_not_ok = 1;
set_bulk_out_req_length(common, bh, amount);
if (!start_out_transfer(common, bh))
/* Dunno what to do if common->fsg is NULL */
return -EIO;
@ -2289,7 +2290,6 @@ static int get_next_command(struct fsg_common *common)
/* Queue a request to read a Bulk-only CBW */
set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
bh->outreq->short_not_ok = 1;
if (!start_out_transfer(common, bh))
/* Don't know what to do if common->fsg is NULL */
return -EIO;

18
drivers/usb/gadget/file_storage.c
View File

@ -1335,9 +1335,7 @@ static int do_write(struct fsg_dev *fsg)
* equal to the buffer size, which is divisible by
* the bulk-out maxpacket size.
*/
bh->outreq->length = bh->bulk_out_intended_length =
amount;
bh->outreq->short_not_ok = 1;
set_bulk_out_req_length(fsg, bh, amount);
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
fsg->next_buffhd_to_fill = bh->next;
@ -1370,6 +1368,11 @@ static int do_write(struct fsg_dev *fsg)
amount = curlun->file_length - file_offset;
}
/* Don't accept excess data. The spec doesn't say
* what to do in this case. We'll ignore the error.
*/
amount = min(amount, bh->bulk_out_intended_length);
/* Don't write a partial block */
amount = round_down(amount, curlun->blksize);
if (amount == 0)
@ -1409,7 +1412,7 @@ static int do_write(struct fsg_dev *fsg)
empty_write:
/* Did the host decide to stop early? */
if (bh->outreq->actual != bh->outreq->length) {
if (bh->outreq->actual < bh->bulk_out_intended_length) {
fsg->short_packet_received = 1;
break;
}
@ -1953,7 +1956,7 @@ static int throw_away_data(struct fsg_dev *fsg)
fsg->next_buffhd_to_drain = bh->next;
/* A short packet or an error ends everything */
if (bh->outreq->actual != bh->outreq->length ||
if (bh->outreq->actual < bh->bulk_out_intended_length ||
bh->outreq->status != 0) {
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
return -EINTR;
@ -1971,9 +1974,7 @@ static int throw_away_data(struct fsg_dev *fsg)
* equal to the buffer size, which is divisible by
* the bulk-out maxpacket size.
*/
bh->outreq->length = bh->bulk_out_intended_length =
amount;
bh->outreq->short_not_ok = 1;
set_bulk_out_req_length(fsg, bh, amount);
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
fsg->next_buffhd_to_fill = bh->next;
@ -2652,7 +2653,6 @@ static int get_next_command(struct fsg_dev *fsg)
/* Queue a request to read a Bulk-only CBW */
set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);