AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge commit 'xceiv-for-v3.7' into for-3.7/cleanup2

Browse Source
This commit is contained in:
Stephen Warren 2012-09-14 11:35:16 -06:00
commit fef40b2369
41 changed files with 1596 additions and 607 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
Documentation/devicetree/bindings/usb/twlxxxx-usb.txt Normal file
View File

@ -0,0 +1,40 @@
USB COMPARATOR OF TWL CHIPS
TWL6030 USB COMPARATOR
- compatible : Should be "ti,twl6030-usb"
- interrupts : Two interrupt numbers to the cpu should be specified. First
interrupt number is the otg interrupt number that raises ID interrupts when
the controller has to act as host and the second interrupt number is the
usb interrupt number that raises VBUS interrupts when the controller has to
act as device
- usb-supply : phandle to the regulator device tree node. It should be vusb
if it is twl6030 or ldousb if it is twl6025 subclass.
twl6030-usb {
compatible = "ti,twl6030-usb";
interrupts = < 4 10 >;
};
Board specific device node entry
&twl6030-usb {
usb-supply = <&vusb>;
};
TWL4030 USB PHY AND COMPARATOR
- compatible : Should be "ti,twl4030-usb"
- interrupts : The interrupt numbers to the cpu should be specified. First
interrupt number is the otg interrupt number that raises ID interrupts
and VBUS interrupts. The second interrupt number is optional.
- <supply-name>-supply : phandle to the regulator device tree node.
<supply-name> should be vusb1v5, vusb1v8 and vusb3v1
- usb_mode : The mode used by the phy to connect to the controller. "1"
specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
twl4030-usb {
compatible = "ti,twl4030-usb";
interrupts = < 10 4 >;
usb1v5-supply = <&vusb1v5>;
usb1v8-supply = <&vusb1v8>;
usb3v1-supply = <&vusb3v1>;
usb_mode = <1>;
};

17
Documentation/devicetree/bindings/usb/usb-phy.txt Normal file
View File

@ -0,0 +1,17 @@
USB PHY
OMAP USB2 PHY
Required properties:
- compatible: Should be "ti,omap-usb2"
- reg : Address and length of the register set for the device. Also
add the address of control module dev conf register until a driver for
control module is added
This is usually a subnode of ocp2scp to which it is connected.
usb2phy@4a0ad080 {
compatible = "ti,omap-usb2";
reg = <0x4a0ad080 0x58>,
<0x4a002300 0x4>;
};

1
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -32,6 +32,7 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/smsc911x.h>
#include <linux/wl12xx.h>

138
arch/arm/mach-omap2/omap_phy_internal.c
View File

@ -31,144 +31,6 @@
#include <plat/usb.h>
#include "control.h"
/* OMAP control module register for UTMI PHY */
#define CONTROL_DEV_CONF 0x300
#define PHY_PD 0x1
#define USBOTGHS_CONTROL 0x33c
#define AVALID BIT(0)
#define BVALID BIT(1)
#define VBUSVALID BIT(2)
#define SESSEND BIT(3)
#define IDDIG BIT(4)
static struct clk *phyclk, *clk48m, *clk32k;
static void __iomem *ctrl_base;
static int usbotghs_control;
int omap4430_phy_init(struct device *dev)
{
ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
if (!ctrl_base) {
pr_err("control module ioremap failed\n");
return -ENOMEM;
}
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
if (!dev) {
iounmap(ctrl_base);
return 0;
}
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
iounmap(ctrl_base);
return PTR_ERR(phyclk);
}
clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
if (IS_ERR(clk48m)) {
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
clk_put(phyclk);
iounmap(ctrl_base);
return PTR_ERR(clk48m);
}
clk32k = clk_get(dev, "usb_phy_cm_clk32k");
if (IS_ERR(clk32k)) {
dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
clk_put(phyclk);
clk_put(clk48m);
iounmap(ctrl_base);
return PTR_ERR(clk32k);
}
return 0;
}
int omap4430_phy_set_clk(struct device *dev, int on)
{
static int state;
if (on && !state) {
/* Enable the phy clocks */
clk_enable(phyclk);
clk_enable(clk48m);
clk_enable(clk32k);
state = 1;
} else if (state) {
/* Disable the phy clocks */
clk_disable(phyclk);
clk_disable(clk48m);
clk_disable(clk32k);
state = 0;
}
return 0;
}
int omap4430_phy_power(struct device *dev, int ID, int on)
{
if (on) {
if (ID)
/* enable VBUS valid, IDDIG groung */
__raw_writel(AVALID | VBUSVALID, ctrl_base +
USBOTGHS_CONTROL);
else
/*
* Enable VBUS Valid, AValid and IDDIG
* high impedance
*/
__raw_writel(IDDIG | AVALID | VBUSVALID,
ctrl_base + USBOTGHS_CONTROL);
} else {
/* Enable session END and IDIG to high impedance. */
__raw_writel(SESSEND | IDDIG, ctrl_base +
USBOTGHS_CONTROL);
}
return 0;
}
int omap4430_phy_suspend(struct device *dev, int suspend)
{
if (suspend) {
/* Disable the clocks */
omap4430_phy_set_clk(dev, 0);
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
/* save the context */
usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
} else {
/* Enable the internel phy clcoks */
omap4430_phy_set_clk(dev, 1);
/* power on the phy */
if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
mdelay(200);
}
/* restore the context */
__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
}
return 0;
}
int omap4430_phy_exit(struct device *dev)
{
if (ctrl_base)
iounmap(ctrl_base);
if (phyclk)
clk_put(phyclk);
if (clk48m)
clk_put(clk48m);
if (clk32k)
clk_put(clk32k);
return 0;
}
void am35x_musb_reset(void)
{
u32 regval;

5
arch/arm/mach-omap2/twl-common.c
View File

@ -251,11 +251,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
#if defined(CONFIG_ARCH_OMAP4)
static struct twl4030_usb_data omap4_usb_pdata = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct regulator_init_data omap4_vdac_idata = {

3
arch/arm/mach-omap2/usb-musb.c
View File

@ -117,7 +117,4 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
dev->dma_mask = &musb_dmamask;
dev->coherent_dma_mask = musb_dmamask;
put_device(dev);
if (cpu_is_omap44xx())
omap4430_phy_init(dev);
}

1
arch/arm/mach-tegra/Makefile
View File

@ -23,7 +23,6 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o

2
arch/arm/mach-tegra/devices.c
View File

@ -27,7 +27,7 @@
#include <mach/irqs.h>
#include <mach/iomap.h>
#include <mach/dma.h>
#include <mach/usb_phy.h>
#include <linux/usb/tegra_usb_phy.h>
#include "gpio-names.h"
#include "devices.h"

2
arch/arm/mach-tegra/devices.h
View File

@ -22,7 +22,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
#include <mach/usb_phy.h>
#include <linux/usb/tegra_usb_phy.h>
extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;

15
drivers/usb/dwc3/core.c
View File

@ -50,6 +50,7 @@
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/usb/otg.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@ -136,6 +137,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
mdelay(100);
/* Clear USB3 PHY reset */
@ -465,6 +468,18 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
return -ENOMEM;
}
dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
dev_err(dev, "no usb2 phy configured\n");
return -EPROBE_DEFER;
}
dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
dev_err(dev, "no usb3 phy configured\n");
return -EPROBE_DEFER;
}
spin_lock_init(&dwc->lock);
platform_set_drvdata(pdev, dwc);

5
drivers/usb/dwc3/core.h
View File

@ -624,6 +624,8 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @mode: mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
* @ep0_bounced: true when we used bounce buffer
@ -667,6 +669,9 @@ struct dwc3 {
struct usb_gadget gadget;
struct usb_gadget_driver *gadget_driver;
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
void __iomem *regs;
size_t regs_size;

66
drivers/usb/dwc3/dwc3-exynos.c
View File

@ -19,16 +19,74 @@
#include <linux/platform_data/dwc3-exynos.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
struct platform_device *usb3_phy;
struct device *dev;
struct clk *clk;
};
static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
int ret;
memset(&pdata, 0x00, sizeof(pdata));
pdev = platform_device_alloc("nop_usb_xceiv", 0);
if (!pdev)
return -ENOMEM;
exynos->usb2_phy = pdev;
pdata.type = USB_PHY_TYPE_USB2;
ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata));
if (ret)
goto err1;
pdev = platform_device_alloc("nop_usb_xceiv", 1);
if (!pdev) {
ret = -ENOMEM;
goto err1;
}
exynos->usb3_phy = pdev;
pdata.type = USB_PHY_TYPE_USB3;
ret = platform_device_add_data(exynos->usb3_phy, &pdata, sizeof(pdata));
if (ret)
goto err2;
ret = platform_device_add(exynos->usb2_phy);
if (ret)
goto err2;
ret = platform_device_add(exynos->usb3_phy);
if (ret)
goto err3;
return 0;
err3:
platform_device_del(exynos->usb2_phy);
err2:
platform_device_put(exynos->usb3_phy);
err1:
platform_device_put(exynos->usb2_phy);
return ret;
}
static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
@ -51,6 +109,12 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
if (devid < 0)
goto err1;
ret = dwc3_exynos_register_phys(exynos);
if (ret) {
dev_err(&pdev->dev, "couldn't register PHYs\n");
goto err1;
}
dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
@ -120,6 +184,8 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
platform_device_unregister(exynos->dwc3);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
dwc3_put_device_id(exynos->dwc3->id);

66
drivers/usb/dwc3/dwc3-omap.c
View File

@ -48,6 +48,9 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
/*
@ -131,6 +134,8 @@ struct dwc3_omap {
spinlock_t lock;
struct platform_device *dwc3;
struct platform_device *usb2_phy;
struct platform_device *usb3_phy;
struct device *dev;
int irq;
@ -152,6 +157,59 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
writel(value, base + offset);
}
static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
int ret;
memset(&pdata, 0x00, sizeof(pdata));
pdev = platform_device_alloc("nop_usb_xceiv", 0);
if (!pdev)
return -ENOMEM;
omap->usb2_phy = pdev;
pdata.type = USB_PHY_TYPE_USB2;
ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata));
if (ret)
goto err1;
pdev = platform_device_alloc("nop_usb_xceiv", 1);
if (!pdev) {
ret = -ENOMEM;
goto err1;
}
omap->usb3_phy = pdev;
pdata.type = USB_PHY_TYPE_USB3;
ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata));
if (ret)
goto err2;
ret = platform_device_add(omap->usb2_phy);
if (ret)
goto err2;
ret = platform_device_add(omap->usb3_phy);
if (ret)
goto err3;
return 0;
err3:
platform_device_del(omap->usb2_phy);
err2:
platform_device_put(omap->usb3_phy);
err1:
platform_device_put(omap->usb2_phy);
return ret;
}
static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
{
@ -251,6 +309,12 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
return -ENOMEM;
}
ret = dwc3_omap_register_phys(omap);
if (ret) {
dev_err(dev, "couldn't register PHYs\n");
return ret;
}
devid = dwc3_get_device_id();
if (devid < 0)
return -ENODEV;
@ -371,6 +435,8 @@ static int __devexit dwc3_omap_remove(struct platform_device *pdev)
struct dwc3_omap *omap = platform_get_drvdata(pdev);
platform_device_unregister(omap->dwc3);
platform_device_unregister(omap->usb2_phy);
platform_device_unregister(omap->usb3_phy);
dwc3_put_device_id(omap->dwc3->id);

67
drivers/usb/dwc3/dwc3-pci.c
View File

@ -42,6 +42,9 @@
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "core.h"
/* FIXME define these in <linux/pci_ids.h> */
@ -51,8 +54,64 @@
struct dwc3_pci {
struct device *dev;
struct platform_device *dwc3;
struct platform_device *usb2_phy;
struct platform_device *usb3_phy;
};
static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue)
{
struct nop_usb_xceiv_platform_data pdata;
struct platform_device *pdev;
int ret;
memset(&pdata, 0x00, sizeof(pdata));
pdev = platform_device_alloc("nop_usb_xceiv", 0);
if (!pdev)
return -ENOMEM;
glue->usb2_phy = pdev;
pdata.type = USB_PHY_TYPE_USB2;
ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata));
if (ret)
goto err1;
pdev = platform_device_alloc("nop_usb_xceiv", 1);
if (!pdev) {
ret = -ENOMEM;
goto err1;
}
glue->usb3_phy = pdev;
pdata.type = USB_PHY_TYPE_USB3;
ret = platform_device_add_data(glue->usb3_phy, &pdata, sizeof(pdata));
if (ret)
goto err2;
ret = platform_device_add(glue->usb2_phy);
if (ret)
goto err2;
ret = platform_device_add(glue->usb3_phy);
if (ret)
goto err3;
return 0;
err3:
platform_device_del(glue->usb2_phy);
err2:
platform_device_put(glue->usb3_phy);
err1:
platform_device_put(glue->usb2_phy);
return ret;
}
static int __devinit dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
@ -80,6 +139,12 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
pci_set_power_state(pci, PCI_D0);
pci_set_master(pci);
ret = dwc3_pci_register_phys(glue);
if (ret) {
dev_err(dev, "couldn't register PHYs\n");
return ret;
}
devid = dwc3_get_device_id();
if (devid < 0) {
ret = -ENOMEM;
@ -144,6 +209,8 @@ static void __devexit dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
dwc3_put_device_id(glue->dwc3->id);
platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);

14
drivers/usb/host/ehci-tegra.c
View File

@ -27,7 +27,7 @@
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <mach/usb_phy.h>
#include <linux/usb/tegra_usb_phy.h>
#include <mach/iomap.h>
#define TEGRA_USB_DMA_ALIGN 32
@ -49,7 +49,7 @@ static void tegra_ehci_power_up(struct usb_hcd *hcd)
clk_prepare_enable(tegra->emc_clk);
clk_prepare_enable(tegra->clk);
tegra_usb_phy_power_on(tegra->phy);
usb_phy_set_suspend(&tegra->phy->u_phy, 0);
tegra->host_resumed = 1;
}
@ -58,7 +58,7 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd)
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
tegra->host_resumed = 0;
tegra_usb_phy_power_off(tegra->phy);
usb_phy_set_suspend(&tegra->phy->u_phy, 1);
clk_disable_unprepare(tegra->clk);
clk_disable_unprepare(tegra->emc_clk);
}
@ -715,7 +715,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
goto fail_phy;
}
err = tegra_usb_phy_power_on(tegra->phy);
usb_phy_init(&tegra->phy->u_phy);
err = usb_phy_set_suspend(&tegra->phy->u_phy, 0);
if (err) {
dev_err(&pdev->dev, "Failed to power on the phy\n");
goto fail;
@ -762,7 +764,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
usb_put_phy(tegra->transceiver);
}
#endif
tegra_usb_phy_close(tegra->phy);
usb_phy_shutdown(&tegra->phy->u_phy);
fail_phy:
iounmap(hcd->regs);
fail_io:
@ -800,7 +802,7 @@ static int tegra_ehci_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
tegra_usb_phy_close(tegra->phy);
usb_phy_shutdown(&tegra->phy->u_phy);
iounmap(hcd->regs);
usb_put_hcd(hcd);

1
drivers/usb/musb/am35x.c
View File

@ -33,6 +33,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <plat/usb.h>

1
drivers/usb/musb/blackfin.c
View File

@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/prefetch.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <asm/cacheflush.h>

1
drivers/usb/musb/da8xx.c
View File

@ -33,6 +33,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <mach/da8xx.h>
#include <mach/usb.h>

1
drivers/usb/musb/davinci.c
View File

@ -33,6 +33,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <mach/cputype.h>
#include <mach/hardware.h>

1
drivers/usb/musb/musb_dsps.c
View File

@ -36,6 +36,7 @@
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
#include <linux/of_device.h>

1
drivers/usb/musb/tusb6010.c
View File

@ -24,6 +24,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
#include "musb_core.h"

2
drivers/usb/otg/Kconfig
View File

@ -68,7 +68,7 @@ config TWL4030_USB
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE
depends on TWL4030_CORE && OMAP_USB2
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL6030

34
drivers/usb/otg/fsl_otg.c
View File

@ -544,9 +544,13 @@ int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
*/
static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
struct fsl_otg *otg_dev;
if (!otg || otg_dev != fsl_otg_dev)
if (!otg)
return -ENODEV;
otg_dev = container_of(otg->phy, struct fsl_otg, phy);
if (otg_dev != fsl_otg_dev)
return -ENODEV;
otg->host = host;
@ -590,12 +594,15 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
static int fsl_otg_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
struct fsl_otg *otg_dev;
if (!otg)
return -ENODEV;
otg_dev = container_of(otg->phy, struct fsl_otg, phy);
VDBG("otg_dev 0x%x\n", (int)otg_dev);
VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
if (!otg || otg_dev != fsl_otg_dev)
if (otg_dev != fsl_otg_dev)
return -ENODEV;
if (!gadget) {
@ -660,10 +667,13 @@ static void fsl_otg_event(struct work_struct *work)
/* B-device start SRP */
static int fsl_otg_start_srp(struct usb_otg *otg)
{
struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
struct fsl_otg *otg_dev;
if (!otg || otg_dev != fsl_otg_dev
|| otg->phy->state != OTG_STATE_B_IDLE)
if (!otg || otg->phy->state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_dev = container_of(otg->phy, struct fsl_otg, phy);
if (otg_dev != fsl_otg_dev)
return -ENODEV;
otg_dev->fsm.b_bus_req = 1;
@ -675,9 +685,13 @@ static int fsl_otg_start_srp(struct usb_otg *otg)
/* A_host suspend will call this function to start hnp */
static int fsl_otg_start_hnp(struct usb_otg *otg)
{
struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy);
struct fsl_otg *otg_dev;
if (!otg || otg_dev != fsl_otg_dev)
if (!otg)
return -ENODEV;
otg_dev = container_of(otg->phy, struct fsl_otg, phy);
if (otg_dev != fsl_otg_dev)
return -ENODEV;
DBG("start_hnp...n");

38
drivers/usb/otg/mxs-phy.c
View File

@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/workqueue.h>
#define DRIVER_NAME "mxs_phy"
@ -34,9 +35,16 @@
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
/*
* Amount of delay in miliseconds to safely enable ENHOSTDISCONDETECT bit
* so that connection and reset processing can be completed for the root hub.
*/
#define MXY_PHY_ENHOSTDISCONDETECT_DELAY 250
struct mxs_phy {
struct usb_phy phy;
struct clk *clk;
struct delayed_work enhostdiscondetect_work;
};
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
@ -62,6 +70,7 @@ static int mxs_phy_init(struct usb_phy *phy)
clk_prepare_enable(mxs_phy->clk);
mxs_phy_hw_init(mxs_phy);
INIT_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work, NULL);
return 0;
}
@ -76,13 +85,34 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
clk_disable_unprepare(mxs_phy->clk);
}
static void mxs_phy_enhostdiscondetect_delay(struct work_struct *ws)
{
struct mxs_phy *mxs_phy = container_of(ws, struct mxs_phy,
enhostdiscondetect_work.work);
/* Enable HOSTDISCONDETECT after delay. */
dev_dbg(mxs_phy->phy.dev, "Setting ENHOSTDISCONDETECT\n");
writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
mxs_phy->phy.io_priv + HW_USBPHY_CTRL_SET);
}
static int mxs_phy_on_connect(struct usb_phy *phy, int port)
{
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
dev_dbg(phy->dev, "Connect on port %d\n", port);
mxs_phy_hw_init(to_mxs_phy(phy));
writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
phy->io_priv + HW_USBPHY_CTRL_SET);
mxs_phy_hw_init(mxs_phy);
/*
* Delay enabling ENHOSTDISCONDETECT so that connection and
* reset processing can be completed for the root hub.
*/
dev_dbg(phy->dev, "Delaying setting ENHOSTDISCONDETECT\n");
PREPARE_DELAYED_WORK(&mxs_phy->enhostdiscondetect_work,
mxs_phy_enhostdiscondetect_delay);
schedule_delayed_work(&mxs_phy->enhostdiscondetect_work,
msecs_to_jiffies(MXY_PHY_ENHOSTDISCONDETECT_DELAY));
return 0;
}
@ -91,6 +121,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
{
dev_dbg(phy->dev, "Disconnect on port %d\n", port);
/* No need to delay before clearing ENHOSTDISCONDETECT. */
dev_dbg(phy->dev, "Clearing ENHOSTDISCONDETECT\n");
writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
phy->io_priv + HW_USBPHY_CTRL_CLR);

8
drivers/usb/otg/nop-usb-xceiv.c
View File

@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/slab.h>
struct nop_usb_xceiv {
@ -94,7 +95,9 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
{
struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
struct nop_usb_xceiv *nop;
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
nop = kzalloc(sizeof *nop, GFP_KERNEL);
@ -107,6 +110,9 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
return -ENOMEM;
}
if (pdata)
type = pdata->type;
nop->dev = &pdev->dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
@ -117,7 +123,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
err = usb_add_phy(&nop->phy, USB_PHY_TYPE_USB2);
err = usb_add_phy(&nop->phy, type);
if (err) {
dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
err);

2
drivers/usb/otg/otg.c
View File

@ -159,7 +159,7 @@ int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
unsigned long flags;
struct usb_phy *phy;
if (x && x->type != USB_PHY_TYPE_UNDEFINED) {
if (x->type != USB_PHY_TYPE_UNDEFINED) {
dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
return -EINVAL;
}

26
drivers/usb/otg/twl4030-usb.c
View File

@ -585,23 +585,28 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
struct twl4030_usb *twl;
int status, err;
struct usb_otg *otg;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
return -EINVAL;
}
struct device_node *np = pdev->dev.of_node;
twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
if (!twl)
return -ENOMEM;
if (np)
of_property_read_u32(np, "usb_mode",
(enum twl4030_usb_mode *)&twl->usb_mode);
else if (pdata)
twl->usb_mode = pdata->usb_mode;
else {
dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
return -EINVAL;
}
otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
if (!otg)
return -ENOMEM;
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
twl->usb_mode = pdata->usb_mode;
twl->vbus_supplied = false;
twl->asleep = 1;
twl->linkstat = OMAP_MUSB_UNKNOWN;
@ -690,12 +695,21 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id twl4030_usb_id_table[] = {
{ .compatible = "ti,twl4030-usb" },
{}
};
MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
#endif
static struct platform_driver twl4030_usb_driver = {
.probe = twl4030_usb_probe,
.remove = __exit_p(twl4030_usb_remove),
.driver = {
.name = "twl4030_usb",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(twl4030_usb_id_table),
},
};

157
drivers/usb/otg/twl6030-usb.c
View File

@ -25,8 +25,9 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb-omap.h>
#include <linux/usb/phy_companion.h>
#include <linux/usb/omap_usb.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
@ -87,7 +88,7 @@
#define VBUS_DET BIT(2)
struct twl6030_usb {
struct usb_phy phy;
struct phy_companion comparator;
struct device *dev;
/* for vbus reporting with irqs disabled */
@ -104,10 +105,10 @@ struct twl6030_usb {
u8 asleep;
bool irq_enabled;
bool vbus_enable;
unsigned long features;
const char *regulator;
};
#define phy_to_twl(x) container_of((x), struct twl6030_usb, phy)
#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
/*-------------------------------------------------------------------------*/
@ -137,50 +138,9 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
return ret;
}
static int twl6030_phy_init(struct usb_phy *x)
static int twl6030_start_srp(struct phy_companion *comparator)
{
struct twl6030_usb *twl;
struct device *dev;
struct twl4030_usb_data *pdata;
twl = phy_to_twl(x);
dev = twl->dev;
pdata = dev->platform_data;
if (twl->linkstat == OMAP_MUSB_ID_GROUND)
pdata->phy_power(twl->dev, 1, 1);
else
pdata->phy_power(twl->dev, 0, 1);
return 0;
}
static void twl6030_phy_shutdown(struct usb_phy *x)
{
struct twl6030_usb *twl;
struct device *dev;
struct twl4030_usb_data *pdata;
twl = phy_to_twl(x);
dev = twl->dev;
pdata = dev->platform_data;
pdata->phy_power(twl->dev, 0, 0);
}
static int twl6030_phy_suspend(struct usb_phy *x, int suspend)
{
struct twl6030_usb *twl = phy_to_twl(x);
struct device *dev = twl->dev;
struct twl4030_usb_data *pdata = dev->platform_data;
pdata->phy_suspend(dev, suspend);
return 0;
}
static int twl6030_start_srp(struct usb_otg *otg)
{
struct twl6030_usb *twl = phy_to_twl(otg->phy);
struct twl6030_usb *twl = comparator_to_twl(comparator);
twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
@ -193,13 +153,6 @@ static int twl6030_start_srp(struct usb_otg *otg)
static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
{
char *regulator_name;
if (twl->features & TWL6025_SUBCLASS)
regulator_name = "ldousb";
else
regulator_name = "vusb";
/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
@ -209,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
/* Program MISC2 register and set bit VUSB_IN_VBAT */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
twl->usb3v3 = regulator_get(twl->dev, regulator_name);
twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
if (IS_ERR(twl->usb3v3))
return -ENODEV;
@ -313,23 +266,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
return IRQ_HANDLED;
}
static int twl6030_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
static int twl6030_enable_irq(struct twl6030_usb *twl)
{
if (!otg)
return -ENODEV;
otg->gadget = gadget;
if (!gadget)
otg->phy->state = OTG_STATE_UNDEFINED;
return 0;
}
static int twl6030_enable_irq(struct usb_phy *x)
{
struct twl6030_usb *twl = phy_to_twl(x);
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
@ -362,9 +300,9 @@ static void otg_set_vbus_work(struct work_struct *data)
CHARGERUSB_CTRL1);
}
static int twl6030_set_vbus(struct usb_otg *otg, bool enabled)
static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
{
struct twl6030_usb *twl = phy_to_twl(otg->phy);
struct twl6030_usb *twl = comparator_to_twl(comparator);
twl->vbus_enable = enabled;
schedule_work(&twl->set_vbus_work);
@ -372,52 +310,44 @@ static int twl6030_set_vbus(struct usb_otg *otg, bool enabled)
return 0;
}
static int twl6030_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
otg->host = host;
if (!host)
otg->phy->state = OTG_STATE_UNDEFINED;
return 0;
}
static int __devinit twl6030_usb_probe(struct platform_device *pdev)
{
u32 ret;
struct twl6030_usb *twl;
int status, err;
struct twl4030_usb_data *pdata;
struct usb_otg *otg;
struct device *dev = &pdev->dev;
pdata = dev->platform_data;
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct twl4030_usb_data *pdata = dev->platform_data;
twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
if (!twl)
return -ENOMEM;
otg = devm_kzalloc(dev, sizeof *otg, GFP_KERNEL);
if (!otg)
return -ENOMEM;
twl->dev = &pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
twl->irq2 = platform_get_irq(pdev, 1);
twl->features = pdata->features;
twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->phy.dev = twl->dev;
twl->phy.label = "twl6030";
twl->phy.otg = otg;
twl->phy.init = twl6030_phy_init;
twl->phy.shutdown = twl6030_phy_shutdown;
twl->phy.set_suspend = twl6030_phy_suspend;
twl->comparator.set_vbus = twl6030_set_vbus;
twl->comparator.start_srp = twl6030_start_srp;
otg->phy = &twl->phy;
otg->set_host = twl6030_set_host;
otg->set_peripheral = twl6030_set_peripheral;
otg->set_vbus = twl6030_set_vbus;
otg->start_srp = twl6030_start_srp;
ret = omap_usb2_set_comparator(&twl->comparator);
if (ret == -ENODEV) {
dev_info(&pdev->dev, "phy not ready, deferring probe");
return -EPROBE_DEFER;
}
if (np) {
twl->regulator = "usb";
} else if (pdata) {
if (pdata->features & TWL6025_SUBCLASS)
twl->regulator = "ldousb";
else
twl->regulator = "vusb";
} else {
dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
return -EINVAL;
}
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@ -427,7 +357,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "ldo init failed\n");
return err;
}
usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2);
platform_set_drvdata(pdev, twl);
if (device_create_file(&pdev->dev, &dev_attr_vbus))
@ -458,9 +387,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
}
twl->asleep = 0;
pdata->phy_init(dev);
twl6030_phy_suspend(&twl->phy, 0);
twl6030_enable_irq(&twl->phy);
twl6030_enable_irq(twl);
dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
return 0;
@ -470,10 +397,6 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
{
struct twl6030_usb *twl = platform_get_drvdata(pdev);
struct twl4030_usb_data *pdata;
struct device *dev = &pdev->dev;
pdata = dev->platform_data;
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
REG_INT_MSK_LINE_C);
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
@ -481,19 +404,27 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
free_irq(twl->irq1, twl);
free_irq(twl->irq2, twl);
regulator_put(twl->usb3v3);
pdata->phy_exit(twl->dev);
device_remove_file(twl->dev, &dev_attr_vbus);
cancel_work_sync(&twl->set_vbus_work);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id twl6030_usb_id_table[] = {
{ .compatible = "ti,twl6030-usb" },
{}
};
MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
#endif
static struct platform_driver twl6030_usb_driver = {
.probe = twl6030_usb_probe,
.remove = __exit_p(twl6030_usb_remove),
.driver = {
.name = "twl6030_usb",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(twl6030_usb_id_table),
},
};

17
drivers/usb/phy/Kconfig
View File

@ -4,6 +4,15 @@
comment "USB Physical Layer drivers"
depends on USB || USB_GADGET
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
select USB_OTG_UTILS
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
The USB OTG controller communicates with the comparator using this
driver.
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
@ -15,3 +24,11 @@ config USB_ISP1301
To compile this driver as a module, choose M here: the
module will be called isp1301.
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
depends on USB_MV_U3D
select USB_OTG_UTILS
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.

3
drivers/usb/phy/Makefile
View File

@ -4,4 +4,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_USB_ISP1301) += isp1301.o
obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o

6
drivers/usb/phy/isp1301.c
View File

@ -15,12 +15,6 @@
#define DRV_NAME "isp1301"
#define ISP1301_I2C_ADDR 0x2C
static const unsigned short normal_i2c[] = {
ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END
};
static const struct i2c_device_id isp1301_id[] = {
{ "isp1301", 0 },
{ }

345
drivers/usb/phy/mv_u3d_phy.c Normal file
View File

@ -0,0 +1,345 @@
/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/usb/otg.h>
#include <linux/platform_data/mv_usb.h>
#include "mv_u3d_phy.h"
/*
* struct mv_u3d_phy - transceiver driver state
* @phy: transceiver structure
* @dev: The parent device supplied to the probe function
* @clk: usb phy clock
* @base: usb phy register memory base
*/
struct mv_u3d_phy {
struct usb_phy phy;
struct mv_usb_platform_data *plat;
struct device *dev;
struct clk *clk;
void __iomem *base;
};
static u32 mv_u3d_phy_read(void __iomem *base, u32 reg)
{
void __iomem *addr, *data;
addr = base;
data = base + 0x4;
writel_relaxed(reg, addr);
return readl_relaxed(data);
}
static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value)
{
void __iomem *addr, *data;
u32 tmp;
addr = base;
data = base + 0x4;
writel_relaxed(reg, addr);
tmp = readl_relaxed(data);
tmp |= value;
writel_relaxed(tmp, data);
}
static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value)
{
void __iomem *addr, *data;
u32 tmp;
addr = base;
data = base + 0x4;
writel_relaxed(reg, addr);
tmp = readl_relaxed(data);
tmp &= ~value;
writel_relaxed(tmp, data);
}
static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value)
{
void __iomem *addr, *data;
addr = base;
data = base + 0x4;
writel_relaxed(reg, addr);
writel_relaxed(value, data);
}
void mv_u3d_phy_shutdown(struct usb_phy *phy)
{
struct mv_u3d_phy *mv_u3d_phy;
void __iomem *base;
u32 val;
mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
base = mv_u3d_phy->base;
/* Power down Reference Analog current, bit 15
* Power down PLL, bit 14
* Power down Receiver, bit 13
* Power down Transmitter, bit 12
* of USB3_POWER_PLL_CONTROL register
*/
val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
val &= ~(USB3_POWER_PLL_CONTROL_PU);
mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
if (mv_u3d_phy->clk)
clk_disable(mv_u3d_phy->clk);
}
static int mv_u3d_phy_init(struct usb_phy *phy)
{
struct mv_u3d_phy *mv_u3d_phy;
void __iomem *base;
u32 val, count;
/* enable usb3 phy */
mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
if (mv_u3d_phy->clk)
clk_enable(mv_u3d_phy->clk);
base = mv_u3d_phy->base;
val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK);
val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT;
mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
udelay(100);
mv_u3d_phy_write(base, USB3_RESET_CONTROL,
USB3_RESET_CONTROL_RESET_PIPE);
udelay(100);
mv_u3d_phy_write(base, USB3_RESET_CONTROL,
USB3_RESET_CONTROL_RESET_PIPE
| USB3_RESET_CONTROL_RESET_PHY);
udelay(100);
val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK
| USB3_POWER_PLL_CONTROL_PHY_MODE_MASK);
val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT)
| (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT);
mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
udelay(100);
mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL,
USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK);
udelay(100);
val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE);
val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK
| USB3_SQUELCH_FFE_FFE_RES_SEL_MASK
| USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK);
val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT)
| (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT)
| (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT));
mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_GEN1_SET0);
val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK;
val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT;
mv_u3d_phy_write(base, USB3_GEN1_SET0, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_GEN2_SET0);
val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK
| USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK
| USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK);
val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT)
| (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT)
| (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT)
| (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT));
mv_u3d_phy_write(base, USB3_GEN2_SET0, val);
udelay(100);
mv_u3d_phy_read(base, USB3_TX_EMPPH);
val &= ~(USB3_TX_EMPPH_AMP_MASK
| USB3_TX_EMPPH_EN_MASK
| USB3_TX_EMPPH_AMP_FORCE_MASK
| USB3_TX_EMPPH_PAR1_MASK
| USB3_TX_EMPPH_PAR2_MASK);
val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT)
| (1 << USB3_TX_EMPPH_EN_SHIFT)
| (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT)
| (0x1C << USB3_TX_EMPPH_PAR1_SHIFT)
| (1 << USB3_TX_EMPPH_PAR2_SHIFT));
mv_u3d_phy_write(base, USB3_TX_EMPPH, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_GEN2_SET1);
val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK
| USB3_GEN2_SET1_G2_RX_SELMUPF_MASK
| USB3_GEN2_SET1_G2_RX_SELMUFI_MASK
| USB3_GEN2_SET1_G2_RX_SELMUFF_MASK);
val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT)
| (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT)
| (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT)
| (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT));
mv_u3d_phy_write(base, USB3_GEN2_SET1, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN);
val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK;
val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT;
mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC);
val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK;
val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT;
mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL);
val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK;
val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT;
mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE);
val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK
| USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK
| USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK);
val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT)
| (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT));
mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val);
udelay(100);
val = mv_u3d_phy_read(base, USB3_TXDETRX);
val &= ~(USB3_TXDETRX_VTHSEL_MASK);
val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT;
mv_u3d_phy_write(base, USB3_TXDETRX, val);
udelay(100);
dev_dbg(mv_u3d_phy->dev, "start calibration\n");
calstart:
/* Perform Manual Calibration */
mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL,
1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT);
mdelay(1);
count = 0;
while (1) {
val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL);
if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT))
break;
else if (count > 50) {
dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n");
goto calstart;
}
count++;
mdelay(1);
}
/* active PIPE interface */
mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL,
1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE);
return 0;
}
static int __devinit mv_u3d_phy_probe(struct platform_device *pdev)
{
struct mv_u3d_phy *mv_u3d_phy;
struct mv_usb_platform_data *pdata;
struct device *dev = &pdev->dev;
struct resource *res;
void __iomem *phy_base;
int ret;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing mem resource\n");
return -ENODEV;
}
phy_base = devm_request_and_ioremap(dev, res);
if (!phy_base) {
dev_err(dev, "%s: register mapping failed\n", __func__);
return -ENXIO;
}
mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL);
if (!mv_u3d_phy)
return -ENOMEM;
mv_u3d_phy->dev = &pdev->dev;
mv_u3d_phy->plat = pdata;
mv_u3d_phy->base = phy_base;
mv_u3d_phy->phy.dev = mv_u3d_phy->dev;
mv_u3d_phy->phy.label = "mv-u3d-phy";
mv_u3d_phy->phy.init = mv_u3d_phy_init;
mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown;
ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3);
if (ret)
goto err;
if (!mv_u3d_phy->clk)
mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy");
platform_set_drvdata(pdev, mv_u3d_phy);
dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n");
err:
return ret;
}
static int __exit mv_u3d_phy_remove(struct platform_device *pdev)
{
struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev);
usb_remove_phy(&mv_u3d_phy->phy);
if (mv_u3d_phy->clk) {
clk_put(mv_u3d_phy->clk);
mv_u3d_phy->clk = NULL;
}
return 0;
}
static struct platform_driver mv_u3d_phy_driver = {
.probe = mv_u3d_phy_probe,
.remove = __devexit_p(mv_u3d_phy_remove),
.driver = {
.name = "mv-u3d-phy",
.owner = THIS_MODULE,
},
};
module_platform_driver(mv_u3d_phy_driver);
MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller");
MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mv-u3d-phy");

105
drivers/usb/phy/mv_u3d_phy.h Normal file
View File

@ -0,0 +1,105 @@
/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#ifndef __MV_U3D_PHY_H
#define __MV_U3D_PHY_H
#define USB3_POWER_PLL_CONTROL 0x1
#define USB3_KVCO_CALI_CONTROL 0x2
#define USB3_IMPEDANCE_CALI_CTRL 0x3
#define USB3_IMPEDANCE_TX_SSC 0x4
#define USB3_SQUELCH_FFE 0x6
#define USB3_GEN1_SET0 0xD
#define USB3_GEN2_SET0 0xF
#define USB3_GEN2_SET1 0x10
#define USB3_DIGITAL_LOOPBACK_EN 0x23
#define USB3_PHY_ISOLATION_MODE 0x26
#define USB3_TXDETRX 0x48
#define USB3_TX_EMPPH 0x5E
#define USB3_RESET_CONTROL 0x90
#define USB3_PIPE_SM_CTRL 0x91
#define USB3_RESET_CONTROL_RESET_PIPE 0x1
#define USB3_RESET_CONTROL_RESET_PHY 0x2
#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0)
#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0
#define USB3_PLL_25MHZ 0x2
#define USB3_PLL_26MHZ 0x5
#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5)
#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5
#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12)
#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12
#define USB3_POWER_PLL_CONTROL_PU (0xF << 12)
#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12)
#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12
#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14
#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15
#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF
#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0
#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4)
#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4
#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8)
#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8
#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11
#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1)
#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1
#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6
#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7)
#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7
#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11)
#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11
#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15
#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0)
#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0
#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3)
#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3
#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6)
#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6
#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8)
#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8
#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10)
#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10
#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12)
#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12
#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0)
#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4)
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4
#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8)
#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4)
#define USB3_TXDETRX_VTHSEL_SHIFT 4
#define USB3_TX_EMPPH_AMP_MASK (0xF << 0)
#define USB3_TX_EMPPH_AMP_SHIFT 0
#define USB3_TX_EMPPH_EN_MASK (0x1 << 6)
#define USB3_TX_EMPPH_EN_SHIFT 6
#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7)
#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7
#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8)
#define USB3_TX_EMPPH_PAR1_SHIFT 8
#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13)
#define USB3_TX_EMPPH_PAR2_SHIFT 13
#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15
#endif /* __MV_U3D_PHY_H */

271
drivers/usb/phy/omap-usb2.c Normal file
View File

@ -0,0 +1,271 @@
/*
* omap-usb2.c - USB PHY, talking to musb controller in OMAP.
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/usb/omap_usb.h>
#include <linux/usb/phy_companion.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
* this phy
* @comparator - the companion phy(comparator) for this phy
*
* The phy companion driver should call this API passing the phy_companion
* filled with set_vbus and start_srp to be used by usb phy.
*
* For use by phy companion driver
*/
int omap_usb2_set_comparator(struct phy_companion *comparator)
{
struct omap_usb *phy;
struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR(x))
return -ENODEV;
phy = phy_to_omapusb(x);
phy->comparator = comparator;
return 0;
}
EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
/**
* omap_usb_phy_power - power on/off the phy using control module reg
* @phy: struct omap_usb *
* @on: 0 or 1, based on powering on or off the PHY
*
* XXX: Remove this function once control module driver gets merged
*/
static void omap_usb_phy_power(struct omap_usb *phy, int on)
{
u32 val;
if (on) {
val = readl(phy->control_dev);
if (val & PHY_PD) {
writel(~PHY_PD, phy->control_dev);
/* XXX: add proper documentation for this delay */
mdelay(200);
}
} else {
writel(PHY_PD, phy->control_dev);
}
}
static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
{
struct omap_usb *phy = phy_to_omapusb(otg->phy);
if (!phy->comparator)
return -ENODEV;
return phy->comparator->set_vbus(phy->comparator, enabled);
}
static int omap_usb_start_srp(struct usb_otg *otg)
{
struct omap_usb *phy = phy_to_omapusb(otg->phy);
if (!phy->comparator)
return -ENODEV;
return phy->comparator->start_srp(phy->comparator);
}
static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct usb_phy *phy = otg->phy;
otg->host = host;
if (!host)
phy->state = OTG_STATE_UNDEFINED;
return 0;
}
static int omap_usb_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
struct usb_phy *phy = otg->phy;
otg->gadget = gadget;
if (!gadget)
phy->state = OTG_STATE_UNDEFINED;
return 0;
}
static int omap_usb2_suspend(struct usb_phy *x, int suspend)
{
u32 ret;
struct omap_usb *phy = phy_to_omapusb(x);
if (suspend && !phy->is_suspended) {
omap_usb_phy_power(phy, 0);
pm_runtime_put_sync(phy->dev);
phy->is_suspended = 1;
} else if (!suspend && phy->is_suspended) {
ret = pm_runtime_get_sync(phy->dev);
if (ret < 0) {
dev_err(phy->dev, "get_sync failed with err %d\n",
ret);
return ret;
}
omap_usb_phy_power(phy, 1);
phy->is_suspended = 0;
}
return 0;
}
static int __devinit omap_usb2_probe(struct platform_device *pdev)
{
struct omap_usb *phy;
struct usb_otg *otg;
struct resource *res;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy) {
dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
return -ENOMEM;
}
otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
if (!otg) {
dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
return -ENOMEM;
}
phy->dev = &pdev->dev;
phy->phy.dev = phy->dev;
phy->phy.label = "omap-usb2";
phy->phy.set_suspend = omap_usb2_suspend;
phy->phy.otg = otg;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
phy->control_dev = devm_request_and_ioremap(&pdev->dev, res);
if (phy->control_dev == NULL) {
dev_err(&pdev->dev, "Failed to obtain io memory\n");
return -ENXIO;
}
phy->is_suspended = 1;
omap_usb_phy_power(phy, 0);
otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral;
otg->set_vbus = omap_usb_set_vbus;
otg->start_srp = omap_usb_start_srp;
otg->phy = &phy->phy;
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
if (IS_ERR(phy->wkupclk)) {
dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
return PTR_ERR(phy->wkupclk);
}
clk_prepare(phy->wkupclk);
usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2);
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
return 0;
}
static int __devexit omap_usb2_remove(struct platform_device *pdev)
{
struct omap_usb *phy = platform_get_drvdata(pdev);
clk_unprepare(phy->wkupclk);
usb_remove_phy(&phy->phy);
return 0;
}
#ifdef CONFIG_PM_RUNTIME
static int omap_usb2_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_usb *phy = platform_get_drvdata(pdev);
clk_disable(phy->wkupclk);
return 0;
}
static int omap_usb2_runtime_resume(struct device *dev)
{
u32 ret = 0;
struct platform_device *pdev = to_platform_device(dev);
struct omap_usb *phy = platform_get_drvdata(pdev);
ret = clk_enable(phy->wkupclk);
if (ret < 0)
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
return ret;
}
static const struct dev_pm_ops omap_usb2_pm_ops = {
SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
NULL)
};
#define DEV_PM_OPS (&omap_usb2_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
#ifdef CONFIG_OF
static const struct of_device_id omap_usb2_id_table[] = {
{ .compatible = "ti,omap-usb2" },
{}
};
MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
#endif
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
.remove = __devexit_p(omap_usb2_remove),
.driver = {
.name = "omap-usb2",
.owner = THIS_MODULE,
.pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(omap_usb2_id_table),
},
};
module_platform_driver(omap_usb2_driver);
MODULE_ALIAS("platform: omap_usb2");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP USB2 phy driver");
MODULE_LICENSE("GPL v2");

152
arch/arm/mach-tegra/usb_phy.c → drivers/usb/phy/tegra_usb_phy.c
View File

@ -1,6 +1,4 @@
/*
* arch/arm/mach-tegra/usb_phy.c
*
* Copyright (C) 2010 Google, Inc.
*
* Author:
@ -31,7 +29,7 @@
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <mach/gpio-tegra.h>
#include <mach/usb_phy.h>
#include <linux/usb/tegra_usb_phy.h>
#include <mach/iomap.h>
#define ULPI_VIEWPORT 0x170
@ -482,7 +480,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
return 0;
}
static void utmi_phy_power_off(struct tegra_usb_phy *phy)
static int utmi_phy_power_off(struct tegra_usb_phy *phy)
{
unsigned long val;
void __iomem *base = phy->regs;
@ -514,7 +512,7 @@ static void utmi_phy_power_off(struct tegra_usb_phy *phy)
UTMIP_FORCE_PDDR_POWERDOWN;
writel(val, base + UTMIP_XCVR_CFG1);
utmip_pad_power_off(phy);
return utmip_pad_power_off(phy);
}
static void utmi_phy_preresume(struct tegra_usb_phy *phy)
@ -638,7 +636,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
return 0;
}
static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
unsigned long val;
void __iomem *base = phy->regs;
@ -651,15 +649,92 @@ static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
writel(val, base + USB_PORTSC1);
gpio_direction_output(config->reset_gpio, 0);
clk_disable(phy->clk);
return gpio_direction_output(config->reset_gpio, 0);
}
static int tegra_phy_init(struct usb_phy *x)
{
struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
struct tegra_ulpi_config *ulpi_config;
int err;
if (phy_is_ulpi(phy)) {
ulpi_config = phy->config;
phy->clk = clk_get_sys(NULL, ulpi_config->clk);
if (IS_ERR(phy->clk)) {
pr_err("%s: can't get ulpi clock\n", __func__);
err = -ENXIO;
goto err1;
}
if (!gpio_is_valid(ulpi_config->reset_gpio))
ulpi_config->reset_gpio =
of_get_named_gpio(phy->dev->of_node,
"nvidia,phy-reset-gpio", 0);
if (!gpio_is_valid(ulpi_config->reset_gpio)) {
pr_err("%s: invalid reset gpio: %d\n", __func__,
ulpi_config->reset_gpio);
err = -EINVAL;
goto err1;
}
gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(ulpi_config->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
} else {
err = utmip_pad_open(phy);
if (err < 0)
goto err1;
}
return 0;
err1:
clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
return err;
}
static void tegra_usb_phy_close(struct usb_phy *x)
{
struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
if (phy_is_ulpi(phy))
clk_put(phy->clk);
else
utmip_pad_close(phy);
clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
kfree(phy);
}
static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
{
if (phy_is_ulpi(phy))
return ulpi_phy_power_on(phy);
else
return utmi_phy_power_on(phy);
}
static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
{
if (phy_is_ulpi(phy))
return ulpi_phy_power_off(phy);
else
return utmi_phy_power_off(phy);
}
static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
{
struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
if (suspend)
return tegra_usb_phy_power_off(phy);
else
return tegra_usb_phy_power_on(phy);
}
struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
{
struct tegra_usb_phy *phy;
struct tegra_ulpi_config *ulpi_config;
unsigned long parent_rate;
int i;
int err;
@ -672,6 +747,7 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
phy->regs = regs;
phy->config = config;
phy->mode = phy_mode;
phy->dev = dev;
if (!phy->config) {
if (phy_is_ulpi(phy)) {
@ -704,33 +780,9 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
goto err1;
}
if (phy_is_ulpi(phy)) {
ulpi_config = config;
phy->clk = clk_get_sys(NULL, ulpi_config->clk);
if (IS_ERR(phy->clk)) {
pr_err("%s: can't get ulpi clock\n", __func__);
err = -ENXIO;
goto err1;
}
if (!gpio_is_valid(ulpi_config->reset_gpio))
ulpi_config->reset_gpio =
of_get_named_gpio(dev->of_node,
"nvidia,phy-reset-gpio", 0);
if (!gpio_is_valid(ulpi_config->reset_gpio)) {
pr_err("%s: invalid reset gpio: %d\n", __func__,
ulpi_config->reset_gpio);
err = -EINVAL;
goto err1;
}
gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(ulpi_config->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
} else {
err = utmip_pad_open(phy);
if (err < 0)
goto err1;
}
phy->u_phy.init = tegra_phy_init;
phy->u_phy.shutdown = tegra_usb_phy_close;
phy->u_phy.set_suspend = tegra_usb_phy_suspend;
return phy;
@ -743,24 +795,6 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
{
if (phy_is_ulpi(phy))
return ulpi_phy_power_on(phy);
else
return utmi_phy_power_on(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on);
void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
{
if (phy_is_ulpi(phy))
ulpi_phy_power_off(phy);
else
utmi_phy_power_off(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off);
void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
{
if (!phy_is_ulpi(phy))
@ -803,15 +837,3 @@ void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
utmi_phy_clk_enable(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
void tegra_usb_phy_close(struct tegra_usb_phy *phy)
{
if (phy_is_ulpi(phy))
clk_put(phy->clk);
else
utmip_pad_close(phy);
clk_disable_unprepare(phy->pll_u);
clk_put(phy->pll_u);
kfree(phy);
}
EXPORT_SYMBOL_GPL(tegra_usb_phy_close);

24
include/linux/usb/nop-usb-xceiv.h Normal file
View File

@ -0,0 +1,24 @@
#ifndef __LINUX_USB_NOP_XCEIV_H
#define __LINUX_USB_NOP_XCEIV_H
#include <linux/usb/otg.h>
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
#else
static inline void usb_nop_xceiv_register(void)
{
}
static inline void usb_nop_xceiv_unregister(void)
{
}
#endif
#endif /* __LINUX_USB_NOP_XCEIV_H */

46
include/linux/usb/omap_usb.h Normal file
View File

@ -0,0 +1,46 @@
/*
* omap_usb.h -- omap usb2 phy header file
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __DRIVERS_OMAP_USB2_H
#define __DRIVERS_OMAP_USB2_H
#include <linux/usb/otg.h>
struct omap_usb {
struct usb_phy phy;
struct phy_companion *comparator;
struct device *dev;
u32 __iomem *control_dev;
struct clk *wkupclk;
u8 is_suspended:1;
};
#define PHY_PD 0x1
#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
extern int omap_usb2_set_comparator(struct phy_companion *comparator);
#else
static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
{
return -ENODEV;
}
#endif
#endif /* __DRIVERS_OMAP_USB_H */

236
include/linux/usb/otg.h
View File

@ -9,56 +9,7 @@
#ifndef __LINUX_USB_OTG_H
#define __LINUX_USB_OTG_H
#include <linux/notifier.h>
/* OTG defines lots of enumeration states before device reset */
enum usb_otg_state {
OTG_STATE_UNDEFINED = 0,
/* single-role peripheral, and dual-role default-b */
OTG_STATE_B_IDLE,
OTG_STATE_B_SRP_INIT,
OTG_STATE_B_PERIPHERAL,
/* extra dual-role default-b states */
OTG_STATE_B_WAIT_ACON,
OTG_STATE_B_HOST,
/* dual-role default-a */
OTG_STATE_A_IDLE,
OTG_STATE_A_WAIT_VRISE,
OTG_STATE_A_WAIT_BCON,
OTG_STATE_A_HOST,
OTG_STATE_A_SUSPEND,
OTG_STATE_A_PERIPHERAL,
OTG_STATE_A_WAIT_VFALL,
OTG_STATE_A_VBUS_ERR,
};
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
USB_EVENT_ID, /* id was grounded */
USB_EVENT_CHARGER, /* usb dedicated charger */
USB_EVENT_ENUMERATED, /* gadget driver enumerated */
};
/* associate a type with PHY */
enum usb_phy_type {
USB_PHY_TYPE_UNDEFINED,
USB_PHY_TYPE_USB2,
USB_PHY_TYPE_USB3,
};
struct usb_phy;
/* for transceivers connected thru an ULPI interface, the user must
* provide access ops
*/
struct usb_phy_io_ops {
int (*read)(struct usb_phy *x, u32 reg);
int (*write)(struct usb_phy *x, u32 val, u32 reg);
};
#include <linux/usb/phy.h>
struct usb_otg {
u8 default_a;
@ -85,134 +36,9 @@ struct usb_otg {
};
/*
* the otg driver needs to interact with both device side and host side
* usb controllers. it decides which controller is active at a given
* moment, using the transceiver, ID signal, HNP and sometimes static
* configuration information (including "board isn't wired for otg").
*/
struct usb_phy {
struct device *dev;
const char *label;
unsigned int flags;
enum usb_phy_type type;
enum usb_otg_state state;
enum usb_phy_events last_event;
struct usb_otg *otg;
struct device *io_dev;
struct usb_phy_io_ops *io_ops;
void __iomem *io_priv;
/* for notification of usb_phy_events */
struct atomic_notifier_head notifier;
/* to pass extra port status to the root hub */
u16 port_status;
u16 port_change;
/* to support controllers that have multiple transceivers */
struct list_head head;
/* initialize/shutdown the OTG controller */
int (*init)(struct usb_phy *x);
void (*shutdown)(struct usb_phy *x);
/* effective for B devices, ignored for A-peripheral */
int (*set_power)(struct usb_phy *x,
unsigned mA);
/* for non-OTG B devices: set transceiver into suspend mode */
int (*set_suspend)(struct usb_phy *x,
int suspend);
/* notify phy connect status change */
int (*notify_connect)(struct usb_phy *x, int port);
int (*notify_disconnect)(struct usb_phy *x, int port);
};
/* for board-specific init logic */
extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
extern void usb_remove_phy(struct usb_phy *);
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
#else
static inline void usb_nop_xceiv_register(void)
{
}
static inline void usb_nop_xceiv_unregister(void)
{
}
#endif
/* helpers for direct access thru low-level io interface */
static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
{
if (x->io_ops && x->io_ops->read)
return x->io_ops->read(x, reg);
return -EINVAL;
}
static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
{
if (x->io_ops && x->io_ops->write)
return x->io_ops->write(x, val, reg);
return -EINVAL;
}
static inline int
usb_phy_init(struct usb_phy *x)
{
if (x->init)
return x->init(x);
return 0;
}
static inline void
usb_phy_shutdown(struct usb_phy *x)
{
if (x->shutdown)
x->shutdown(x);
}
/* for usb host and peripheral controller drivers */
#ifdef CONFIG_USB_OTG_UTILS
extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
extern struct usb_phy *devm_usb_get_phy(struct device *dev,
enum usb_phy_type type);
extern void usb_put_phy(struct usb_phy *);
extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
extern const char *otg_state_string(enum usb_otg_state state);
#else
static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
{
return NULL;
}
static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
enum usb_phy_type type)
{
return NULL;
}
static inline void usb_put_phy(struct usb_phy *x)
{
}
static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
{
}
static inline const char *otg_state_string(enum usb_otg_state state)
{
return NULL;
@ -261,42 +87,6 @@ otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
return -ENOTSUPP;
}
static inline int
usb_phy_set_power(struct usb_phy *x, unsigned mA)
{
if (x && x->set_power)
return x->set_power(x, mA);
return 0;
}
/* Context: can sleep */
static inline int
usb_phy_set_suspend(struct usb_phy *x, int suspend)
{
if (x->set_suspend != NULL)
return x->set_suspend(x, suspend);
else
return 0;
}
static inline int
usb_phy_notify_connect(struct usb_phy *x, int port)
{
if (x->notify_connect)
return x->notify_connect(x, port);
else
return 0;
}
static inline int
usb_phy_notify_disconnect(struct usb_phy *x, int port)
{
if (x->notify_disconnect)
return x->notify_disconnect(x, port);
else
return 0;
}
static inline int
otg_start_srp(struct usb_otg *otg)
{
@ -306,31 +96,7 @@ otg_start_srp(struct usb_otg *otg)
return -ENOTSUPP;
}
/* notifiers */
static inline int
usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
{
return atomic_notifier_chain_register(&x->notifier, nb);
}
static inline void
usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
{
atomic_notifier_chain_unregister(&x->notifier, nb);
}
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
static inline const char *usb_phy_type_string(enum usb_phy_type type)
{
switch (type) {
case USB_PHY_TYPE_USB2:
return "USB2 PHY";
case USB_PHY_TYPE_USB3:
return "USB3 PHY";
default:
return "UNKNOWN PHY TYPE";
}
}
#endif /* __LINUX_USB_OTG_H */

233
include/linux/usb/phy.h Normal file
View File

@ -0,0 +1,233 @@
/* USB OTG (On The Go) defines */
/*
*
* These APIs may be used between USB controllers. USB device drivers
* (for either host or peripheral roles) don't use these calls; they
* continue to use just usb_device and usb_gadget.
*/
#ifndef __LINUX_USB_PHY_H
#define __LINUX_USB_PHY_H
#include <linux/notifier.h>
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
USB_EVENT_ID, /* id was grounded */
USB_EVENT_CHARGER, /* usb dedicated charger */
USB_EVENT_ENUMERATED, /* gadget driver enumerated */
};
/* associate a type with PHY */
enum usb_phy_type {
USB_PHY_TYPE_UNDEFINED,
USB_PHY_TYPE_USB2,
USB_PHY_TYPE_USB3,
};
/* OTG defines lots of enumeration states before device reset */
enum usb_otg_state {
OTG_STATE_UNDEFINED = 0,
/* single-role peripheral, and dual-role default-b */
OTG_STATE_B_IDLE,
OTG_STATE_B_SRP_INIT,
OTG_STATE_B_PERIPHERAL,
/* extra dual-role default-b states */
OTG_STATE_B_WAIT_ACON,
OTG_STATE_B_HOST,
/* dual-role default-a */
OTG_STATE_A_IDLE,
OTG_STATE_A_WAIT_VRISE,
OTG_STATE_A_WAIT_BCON,
OTG_STATE_A_HOST,
OTG_STATE_A_SUSPEND,
OTG_STATE_A_PERIPHERAL,
OTG_STATE_A_WAIT_VFALL,
OTG_STATE_A_VBUS_ERR,
};
struct usb_phy;
struct usb_otg;
/* for transceivers connected thru an ULPI interface, the user must
* provide access ops
*/
struct usb_phy_io_ops {
int (*read)(struct usb_phy *x, u32 reg);
int (*write)(struct usb_phy *x, u32 val, u32 reg);
};
struct usb_phy {
struct device *dev;
const char *label;
unsigned int flags;
enum usb_phy_type type;
enum usb_otg_state state;
enum usb_phy_events last_event;
struct usb_otg *otg;
struct device *io_dev;
struct usb_phy_io_ops *io_ops;
void __iomem *io_priv;
/* for notification of usb_phy_events */
struct atomic_notifier_head notifier;
/* to pass extra port status to the root hub */
u16 port_status;
u16 port_change;
/* to support controllers that have multiple transceivers */
struct list_head head;
/* initialize/shutdown the OTG controller */
int (*init)(struct usb_phy *x);
void (*shutdown)(struct usb_phy *x);
/* effective for B devices, ignored for A-peripheral */
int (*set_power)(struct usb_phy *x,
unsigned mA);
/* for non-OTG B devices: set transceiver into suspend mode */
int (*set_suspend)(struct usb_phy *x,
int suspend);
/* notify phy connect status change */
int (*notify_connect)(struct usb_phy *x, int port);
int (*notify_disconnect)(struct usb_phy *x, int port);
};
/* for board-specific init logic */
extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
extern void usb_remove_phy(struct usb_phy *);
/* helpers for direct access thru low-level io interface */
static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
{
if (x->io_ops && x->io_ops->read)
return x->io_ops->read(x, reg);
return -EINVAL;
}
static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
{
if (x->io_ops && x->io_ops->write)
return x->io_ops->write(x, val, reg);
return -EINVAL;
}
static inline int
usb_phy_init(struct usb_phy *x)
{
if (x->init)
return x->init(x);
return 0;
}
static inline void
usb_phy_shutdown(struct usb_phy *x)
{
if (x->shutdown)
x->shutdown(x);
}
/* for usb host and peripheral controller drivers */
#ifdef CONFIG_USB_OTG_UTILS
extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
extern struct usb_phy *devm_usb_get_phy(struct device *dev,
enum usb_phy_type type);
extern void usb_put_phy(struct usb_phy *);
extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
#else
static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
{
return NULL;
}
static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
enum usb_phy_type type)
{
return NULL;
}
static inline void usb_put_phy(struct usb_phy *x)
{
}
static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
{
}
#endif
static inline int
usb_phy_set_power(struct usb_phy *x, unsigned mA)
{
if (x && x->set_power)
return x->set_power(x, mA);
return 0;
}
/* Context: can sleep */
static inline int
usb_phy_set_suspend(struct usb_phy *x, int suspend)
{
if (x->set_suspend != NULL)
return x->set_suspend(x, suspend);
else
return 0;
}
static inline int
usb_phy_notify_connect(struct usb_phy *x, int port)
{
if (x->notify_connect)
return x->notify_connect(x, port);
else
return 0;
}
static inline int
usb_phy_notify_disconnect(struct usb_phy *x, int port)
{
if (x->notify_disconnect)
return x->notify_disconnect(x, port);
else
return 0;
}
/* notifiers */
static inline int
usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
{
return atomic_notifier_chain_register(&x->notifier, nb);
}
static inline void
usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
{
atomic_notifier_chain_unregister(&x->notifier, nb);
}
static inline const char *usb_phy_type_string(enum usb_phy_type type)
{
switch (type) {
case USB_PHY_TYPE_USB2:
return "USB2 PHY";
case USB_PHY_TYPE_USB3:
return "USB3 PHY";
default:
return "UNKNOWN PHY TYPE";
}
}
#endif /* __LINUX_USB_PHY_H */

34
include/linux/usb/phy_companion.h Normal file
View File

@ -0,0 +1,34 @@
/*
* phy-companion.h -- phy companion to indicate the comparator part of PHY
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __DRIVERS_PHY_COMPANION_H
#define __DRIVERS_PHY_COMPANION_H
#include <linux/usb/otg.h>
/* phy_companion to take care of VBUS, ID and srp capabilities */
struct phy_companion {
/* effective for A-peripheral, ignored for B devices */
int (*set_vbus)(struct phy_companion *x, bool enabled);
/* for B devices only: start session with A-Host */
int (*start_srp)(struct phy_companion *x);
};
#endif /* __DRIVERS_PHY_COMPANION_H */

16
arch/arm/mach-tegra/include/mach/usb_phy.h → include/linux/usb/tegra_usb_phy.h
View File

@ -1,6 +1,4 @@
/*
* arch/arm/mach-tegra/include/mach/usb_phy.h
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
@ -14,8 +12,8 @@
*
*/
#ifndef __MACH_USB_PHY_H
#define __MACH_USB_PHY_H
#ifndef __TEGRA_USB_PHY_H
#define __TEGRA_USB_PHY_H
#include <linux/clk.h>
#include <linux/usb/otg.h>
@ -59,19 +57,17 @@ struct tegra_usb_phy {
enum tegra_usb_phy_mode mode;
void *config;
struct usb_phy *ulpi;
struct usb_phy u_phy;
struct device *dev;
};
struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
@ -81,6 +77,4 @@ void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
void tegra_usb_phy_close(struct tegra_usb_phy *phy);
#endif /* __MACH_USB_PHY_H */
#endif /* __TEGRA_USB_PHY_H */