Commit Graph

293 Commits

Author SHA1 Message Date
Heiko Carstens
5273afe359 drivers/usb: add missing GENERIC_HARDIRQS dependencies
Add a couple of missing GENERIC_HARDIRQS dependencies to fix link
errors like below on s390:

ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined!

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-08 12:16:12 -08:00
Greg Kroah-Hartman
67635d397a Merge 3.8-rc5 into usb-next
This fixes up a conflict with drivers/usb/serial/io_ti.c that came up in
linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 12:41:02 -08:00
Greg Kroah-Hartman
4811f53fad usb: xceiv: patches for v3.9 merge window
Two new PHY drivers coming here: one for Samsung,
 one for OMAP. Both architectures are adding USB3
 support to mainline kernel.
 
 The PHY layer now allows us to have mulitple PHYs
 of the same type, which is necessary for platforms
 which provide more than one USB peripheral port.
 
 There's also a few cleanups here: removal of __dev*
 annotations, conversion of a cast to to_delayed_work(),
 and mxs-phy learns about ->set_suspend.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRAqlWAAoJEIaOsuA1yqREo+0P/AnevihQnUfh1WlICZeHvQMR
 +XwSZGVlZYMTiThFldDOsV0ZpngMWW7y7iNc/YjCTyYr1skRjdYahRAc9YZtz2aR
 2aIdIbdt6gS4wthPhMUGdeGlGuXngmrFCKeo7xD8RQQgeJecGqrD/y629fAfnq0Z
 /bCOq+BKj3R9oLOVKtBCOE+j4KQKJSDkywz4GRaZ5yyOmn55Ci/FNJH6EAoGQC5Q
 D1j+PyhlVpqW/XESn9ceRdXIG9i4a9b3PwKFNbO3iCfaLh5JGTW67pTZ+A7+XNcz
 iT3+WibsZIAF6ya/Eu/1NcBgj8an6rhuRN/Nu7GTIOxwZNuKbqpYfuOXf1/StTiJ
 rwmPQ4mh3PzqbLSfe4+H3SIkj8IZCh6NuPiREAwge2HGxOSY7FSIdQSGV6jOqa7F
 7Qi3K9aFMqJYAkhEelPfNtZZhK1fVlQTn+t/q4Zr7r593xpV1Ur73Kn3EwGDBcM3
 5hyKo9DC1Gr1KXtf1B/hzojnMWqmT5BxJhFBSsw7Nj1F0fUaA3G15+vkanvUSWRV
 /wP8pjZD44T/bguion7LSdscX98S4fCTJSf571UYymmVGKejfpYI0wRWearVbrhm
 cwdONVyIt0EFqX2gd2pthx2SBTTOEetb5ssqSKXRBCTDiApjdAPdejVGk3iblw7C
 LOydELt71ER/o2RNVR+h
 =c796
 -----END PGP SIGNATURE-----

Merge tag 'xceiv-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:
	usb: xceiv: patches for v3.9 merge window

	Two new PHY drivers coming here: one for Samsung,
	one for OMAP. Both architectures are adding USB3
	support to mainline kernel.

	The PHY layer now allows us to have mulitple PHYs
	of the same type, which is necessary for platforms
	which provide more than one USB peripheral port.

	There's also a few cleanups here: removal of __dev*
	annotations, conversion of a cast to to_delayed_work(),
	and mxs-phy learns about ->set_suspend.
2013-01-25 09:09:46 -08:00
Vivek Gautam
52758bcb7c usb: dwc3: host: Change platform device ID for xhci-hcd to AUTO
Multiple dwc3 controllers will try to allocate multiple xhci-hcd
interfaces.
Changing platform device IDs from NONE to AUTO to support
such cases.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 13:19:52 +02:00
Vivek Gautam
b0e45ddb96 usb: dwc3: exynos/omap: Change platform device IDs for no_op_xceive to AUTO
Multiple dwc3 probe calls try to allocate no_op_xceive platform
device. Having static IDs for these will throw sysfs error -EEXIST.
Changing these static platform device IDs to AUTO to enable
multiple dwc3 controller support on a SoC.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 13:19:50 +02:00
Kishon Vijay Abraham I
5088b6f5bc usb: dwc3: core: add dt support for dwc3 core
Added dt support for dwc3 core and update the documentation with
device tree binding information. Getting a PHY is now done using
devm_usb_get_phy_by_phandle() for dt boot.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 13:17:54 +02:00
Kishon Vijay Abraham I
5ea921320f usb: dwc3: core: stray statements are removed
No functional change. Stray statements where removed from dwc3 core.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:19:49 +02:00
Kishon Vijay Abraham I
8ba007a971 usb: dwc3: core: enable the USB2 and USB3 phy in probe
Enabled the USB2 and USB3 PHY in probe by calling usb_phy_set_suspend
and disabled the PHYs on driver removal. When PM is implemented this
will be optimized to enable the PHYs only when needed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:19:43 +02:00
Kishon Vijay Abraham I
7e41bba946 usb: dwc3: omap: Add an API to write to dwc mailbox
Add an API in the omap glue layer to write to the mailbox register which
can be used by comparator driver(twl). To pass the detection of the attached
device (signified by VBUS, ID) to the dwc3 core, dwc3 core has to write
to the mailbox regiter.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:17:09 +02:00
Kishon Vijay Abraham I
6373218da1 usb: dwc3: omap: Remove explicit writes to SYSCONFIG register
The runtime API's takes care of setting the SYSCONFIG register with
appropriate values. Hence explicit writes to SYSCONFIG register is
removed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:16:57 +02:00
Kishon Vijay Abraham I
af310e96a0 usb: dwc3: omap: use runtime API's to enable clocks
Before accessing any register, runtime API's should be invoked to enable
the clocks. runtime API's are added here to prevent abort during register
access.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:15:54 +02:00
Kishon Vijay Abraham I
b4bfe6aa9b usb: dwc3: omap: use of_platform API to create dwc3 core pdev
Used of_platform_populate() to create dwc3 core platform_device
from device tree data.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:15:19 +02:00
Kishon Vijay Abraham I
94c6a436f6 usb: dwc3: omap: use device_for_each_child to handle child removal
Used device_for_each_child() to handle child device (dwc3 core) removal
during devexit of dwc3 omap. This is in preparation for creating the child
devices from subnode of dwc3 omap glue using of_platform_populate.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:15:06 +02:00
Vivek Gautam
fe29db8fb2 usb: dwc3: exynos: fix compatible strings for the device
Using specific chip in compatible strings. Newer SOCs can claim
device by using older string in the compatible list.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 09:04:44 +02:00
Felipe Balbi
1a947746db usb: dwc3: gadget: change HIRD threshold to 12
First of all, that 28 value makes no sense as
HIRD threshold is a 4-bit value, second of all
it's causing issues for OMAP5.

Using 12 because commit cbc725b3 (usb: dwc3:
keep default hird threshold value as 4b1100)
had the intention of setting the maximum allowed
value of 0xc.

Also, original code has been wrong forever, so
this should be backported as far back as
possible.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24 12:02:31 +02:00
Vivek Gautam
388e5c5113 usb: dwc3: remove dwc3 dependency on host AND gadget.
DWC3 controller curretly depends on USB && USB_GADGET.
Some hardware may like to use only host feature on dwc3,
or only gadget feature.

So, removing this dependency of USB_DWC3 on USB and USB_GADGET.
Adding the mode of operaiton of DWC3 also here
HOST/GADGET/DUAL_ROLE based on which features are enabled.

[ balbi@ti.com :
	. make sure we have default modes for all possible Kernel
		configurations.
	. Remove the config -> menuconfig change as it's unnecessary
	. switch over to IS_ENABLED() ]

CC: Doug Anderson <dianders@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:55:55 +02:00
Pratyush Anand
c9fda7d6f6 usb: dwc3: gadget: req->queued must be forced to false in cleanup
I am not sure, why I found it during SG debugging. But, I noticed that
even when req_queued list was empty, there were some request in
request_list having queued flag true. If I run test second time, it
first removes all request from request_list and hence busy_slot was
wrongly incremented.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:35:46 +02:00
Pratyush Anand
e5ba5ec833 usb: dwc3: gadget: fix scatter gather implementation
To work with scatter gather properly, fixes have been done in number of
functions. I will explain requirement of each fixes one by one.

start_slot: used to retrieve all request of SG during cleanup

dwc3_gadget_giveback: We need to skip link TRB if it was one of the
intermediate TRB of SG.

dwc3_prepare_one_trb: We need to track all submitted TRBs during
cleanup. Since, all TRBs would be serially allocated, so we can just
keep starting slot info and we can always find rest of them. We need to
pass sg node number, so that we cab appropriately program ISOC_FIRST/ISOC,
Chain etc.

dwc3_prepare_trbs: last_one should be set when it is last node
of SG as well as last node of request_list.

__dwc3_cleanup_done_trbs: It has been prepared after re-factorization of
dwc3_cleanup_done_reqs. It is called for each TRB of SG.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:32:41 +02:00
Pratyush Anand
1877d6c9a5 usb: dwc3: gadget: no need to pass params in case of UPDATE_TRANSFER
UPDATE_TRANSFER does not need any parameters. So, no need to prepare it.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:31:07 +02:00
Pratyush Anand
915e202aee usb: dwc3: gadget: fix skip LINK_TRB on ISOC
When we reach to link trb, we just need to increase free_slot and then
calculate TRB. Return is not correct, as it will cause wrong TRB DMA
address to fetch in case of update transfer.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:30:42 +02:00
Pratyush Anand
cdc359dd87 usb: dwc3: gadget: fix isoc END TRANSFER Condition
There were still some corner cases where isoc transfer was not able to
restart, specially when missed isoc does not happen , and in fact gadget does
not queue any new request during giveback.

Cleanup function calls giveback first, which provides a way to queue
another request to gadget. But gadget did not had any data. So , it did
not call ep_queue. To twist it further, gadget did not queue till
cleanup for last queued TRB is called. If we ever reach this scenario,
we must call END TRANSFER, so that we receive a new  xfernotready with
information about current microframe number.

Also insure that there is no request submitted to core when issuing END
TRANSFER.

Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:29:42 +02:00
Pratyush Anand
15f86bde29 usb: dwc3: gadget: correct return from ep_queue
Its better to return from each if condition as they are mutually
exclusive.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:28:36 +02:00
Pratyush Anand
7efea86c28 usb: dwc3: gadget: fix missed isoc
There are two reasons to generate missed isoc.

1. when the host does not poll for all the data.
2. because of application-side delays that prevent all the data from
being transferred in programmed microframe.

Current code was able to handle first case only.  This patch handles
scenario 2 as well.Scenario 2 sometime may occur with complex gadget
application, however it can be easily reproduced for testing purpose as
follows:

a. use isoc binterval as 1 in f_sourcesink.
b. use pattern=0
c. introduce a delay of 150us deliberately in source_sink_complete, so
that after few frames it lands into scenario 2.
d. now run testusb 16 (isoc in  test). You will notice that if this
patch is not applied then isoc transfer is not able to recover after
first missed.

Current patch's approach is as under:

If missed isoc occurs and there is no request queued then issue END
TRANSFER, so that core generates next xfernotready and we will issue a
fresh START TRANSFER.
If there are still queued request then wait, do not issue either END or
UPDATE TRANSFER, just attach next request in request_list during giveback.
If any future queued request is successfully transferred then we will issue
UPDATE TRANSFER for all request in the request_list.

Cc: <stable@vger.kernel.org> # v3.6 v3.7 v3.8
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:26:59 +02:00
Pratyush Anand
2b758350af usb: dwc3: Enable usb2 LPM only when connected as usb2.0
Synopsys says:
The HIRD Threshold field must be set to ‘0’ when the device core is
operating in super speed mode.

This patch implements above statement.

Cc: <stable@vger.kernel.org> # v3.6 v3.7 v3.8
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:25:28 +02:00
Pratyush Anand
6048e4c69d usb: dwc3: gadget: fix ep->maxburst for ep0
dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by
default initialize ep->maxburst to 1 for ep0.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:11:00 +02:00
Felipe Balbi
d7668024b3 usb: dwc3: debugfs: convert our regdump to use regsets
regset is a generic implementation of regdump
utility through debugfs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:21:34 +02:00
Felipe Balbi
7dbdf4e4b3 usb: dwc3: gadget: don't redefine 'ret'
we have an extra 'ret' variable shadowing a previous
definition. Remove it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:11:36 +02:00
Jingoo Han
20b97dc183 usb: dwc3: exynos: use devm_ functions
The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:11:34 +02:00
Felipe Balbi
5da9347825 usb: dwc3: decrease event buffer size
Currently we're allocating an entire page to
serve as our event buffer. Provided our events
are 4 bytes long, it's very unlikely we will
even trigger 1k events at once.

Even in the worst case scenario where every
endpoint triggers one event and we still have
a couple of error events, that would still
be less than 40 events.

In order to cope with future versions of the
IP which could (or could not) increase the
amount of possible events to trigger
simultaneously, we're using an arbitrary size
of 64 events for our event buffer.

We're saving 3840 bytes by doing so.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:11:32 +02:00
Jack Pham
1604c1e760 usb: dwc3: debugfs: fix regdump offset
As with dwc_readl/writel, the global registers are specified as
offsets starting from the beginning of the xHCI address space,
but the memory region pointed to by dwc->regs already maps to
the start of the global addresses. Fix by offsetting each of the
regs relative to DWC3_GLOBALS_REGS_START.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13 11:58:38 +02:00
Bill Pemberton
fb4e98ab63 usb: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:17 -08:00
Bill Pemberton
41ac7b3ab7 usb: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Olav Kongas <ok@artecdesign.ee>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:16 -08:00
Bill Pemberton
7690417db5 usb: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 13:27:16 -08:00
Kishon Vijay Abraham I
4fd24483d1 usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
commit 392142 moved event buffer allocation out of dwc3_core_init() but
event buffer allocation uses the cached copy of hwparams to determine
the number of event buffers and the caching is done in dwc3_core_init.
So moved dwc3_cache_hwparams function before dwc3_alloc_event_buffers so
that dwc3_alloc_event_buffers sees the correct number of event buffers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 04:47:52 -08:00
Greg Kroah-Hartman
0f89fc3fd8 usb: dwc3: patches for v3.8
We can finaly drop HAVE_CLK dependency from exynos glue layer
 now that clk API provides no-op stubs when it's not linked
 into the kernel.
 
 We're also switching over event buffer allocation to devm_kzalloc()
 and moving the allocation out of dwc3_core_init() so that can be
 re-used when implementing PM support for v3.9.
 
 After the introduction of PLATFORM_DEVID_AUTO, we can also drop the
 homebrew platform device ID handling we had on dwc3 core and let
 driver core take care of that for us.
 
 Exynos glue layer learns about DeviceTree and drops platform_data
 support completely.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQnWwFAAoJEIaOsuA1yqREBCwP/0QH34TL292W0BH9wKj7GVgK
 fT9DOKWGJFNr238WcDmnl+NBVVtWuEjqcAplNNWpJndwRm36lD1WCYOe/fPEh01h
 rm0scCijJcvgpBbQDOAR4B9UbMe9YcymWvuZ7Rx9217ryHiy352OlNoKfAkJOt2e
 JXMREHl7yJwWv6x5pN44NaMDgL/LqFnhvf8KAqo5LjR7XUJlkKQcmUmzkqyxGvnq
 9BFiOoIiRSwmTtnieulgvocgWgmlzkMabeAWvY/w5Cq3g2FKWVwBqg1zyRQK9MrE
 YEoEFy6Edc37C2CrmjaK6g/3Mw7p4v5s0AmU4jCRSFcpk2jpqZa+TEHkdCwgyXXY
 g/nlerxhprc5OFw7BnX26A7u1tIEfVMc9K3lcbadc5PpyiHnsveQHlr7kxhfPocF
 12AhfQRx8G/a365Fle88fTZs+aDKiBnIqpzzLNTHBw3riBdgvQsIjx4X+7Y0rE46
 v1SXqW/H0thlY38YpUQ5a4jNVKUNJJM4vamQ7cu7i9m2n0nHshfMPx2xe5NFKUHW
 bI44+pTq1FO73mmkFbWmMRCdE7aRv63aQInQ4nSbVHBi7Nv+xv8nNT8Y3XJu9T27
 bEv9nXxpx0GFwLQYcwzrhyI7Ws7+EZU5W13vemQUf4EEtwBZq4d9NxUYCUg2OpYo
 ivHz3p1AtBkjL6ImFxjc
 =wqLI
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

USB dwc3 patches from Felipe:

"usb: dwc3: patches for v3.8

We can finaly drop HAVE_CLK dependency from exynos glue layer
now that clk API provides no-op stubs when it's not linked
into the kernel.

We're also switching over event buffer allocation to devm_kzalloc()
and moving the allocation out of dwc3_core_init() so that can be
re-used when implementing PM support for v3.9.

After the introduction of PLATFORM_DEVID_AUTO, we can also drop the
homebrew platform device ID handling we had on dwc3 core and let
driver core take care of that for us.

Exynos glue layer learns about DeviceTree and drops platform_data
support completely."
2012-11-11 17:22:01 -08:00
Felipe Balbi
e32672f0bc usb: dwc3: core: don't kfree() devm_kzalloc()'ed memory
commit 380f0d2 (usb: dwc3: core: switch event
buffer allocation to devm_kzalloc()) was incomplete
leaving a trailing kfree(evt) in an error exit
path.

Fix this problem by removing the trailing kfree(evt).

Cc: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-08 15:26:41 +02:00
Vivek Gautam
7947699a4e usb: dwc3: exynos: remove platform data support
We are removing plat data which was used till now to init and
exit phy. We no longer need this since dwc3-core takes care of
initializing and shutting-down the phy using usb_phy_init()
and usb_phy_shutdown().

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-06 13:44:29 +02:00
Vivek Gautam
accefdd4b2 usb: dwc3: exynos: add support for device tree
This patch adds support to parse probe data for
dwc3-exynos driver using device tree.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-06 13:44:15 +02:00
Sebastian Andrzej Siewior
124dafde8f usb: dwc3: remove custom unique id handling
The lockless implementation of the unique id is quite impressive (:P)
but dirver's core can handle it, we can remove it and make our code a
little smaller.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:18:52 +02:00
Felipe Balbi
6f115e45a0 usb: dwc3: drop HAVE_CLK dependency from Exynos glue layer
commit 93abe8e (clk: add non CONFIG_HAVE_CLK routines)
added clk API stubs when !defined(CONFIG_HAVE_CLK).

This allows us to remove the HAVE_CLK dependency from
Exynos' glue layer and let it compile always.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-19 11:13:47 +03:00
Vivek Gautam
01b8daf71b usb: dwc3: shutdown usb_phy when removing the device
We call usb_phy_init() from dwc3_core_init() during
probe, so adding usb_phy_shutdown() to dwc3_core_exit()
while removing the device so we don't keep PHYs
turned on, consuming power, unnecessarily.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 16:25:23 +03:00
Felipe Balbi
041d81f493 usb: dwc3: gadget: fix 'endpoint always busy' bug
If a USB transfer has already been started, meaning
we have already issued StartTransfer command to that
particular endpoint, DWC3_EP_BUSY flag has also
already been set.

When we try to cancel this transfer which is already
in controller's cache, we will not receive XferComplete
event and we must clear DWC3_EP_BUSY in order to allow
subsequent requests to be properly started.

The best place to clear that flag is right after issuing
DWC3_DEPCMD_ENDTRANSFER.

Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6
Reported-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 15:03:03 +03:00
Felipe Balbi
3921426b13 usb: dwc3: core: move event buffer allocation out of dwc3_core_init()
This patch is in preparation for adding PM support
dwc3 driver. We want to re-use dwc3_core_init and
dwc3_core_exit() functions on resume() and suspend()
callbacks respectively.

Moving even buffer allocation away from dwc3_core_init()
will allow us to reuse the event buffer which was allocated
long ago on our probe() routine.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 14:58:56 +03:00
Felipe Balbi
380f0d2843 usb: dwc3: core: switch event buffer allocation to devm_kzalloc()
The rest of the driver is using devm_kzalloc() where possible
and this patch is just making event buffer allocation follow
the example.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15 14:58:55 +03:00
Greg Kroah-Hartman
2bcb132c69 Merge 3.6-rc6 into usb-next
This resolves the merge problems with:
	drivers/usb/dwc3/gadget.c
	drivers/usb/musb/tusb6010.c
that had been seen in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16 20:42:46 -07:00
Greg Kroah-Hartman
e6d49d093e usb: dwc3: patches for v3.7 merge window
Some much needed changes for our dwc3 driver. First there's a
 rework on the ep0 handling due to some Silicon issue we uncovered
 which affects all users of this IP core (there's a missing
 XferNotReady(DATA) event in some conditions). This issue which
 show up as a SETUP transfers which wouldn't complete ever and
 we would fail TD 7.06 of the Link Layer Test from USB-IF and
 Lecroy's USB3 Exerciser.
 
 We also fix a long standing bug regarding EP0 enable sequencing
 where we weren't setting a particular bit (Ignore Sequence
 Number). Since we never saw any problems caused by that, it
 didn't deserve being sent to stable tree.
 
 On this pull request we also fix Burst Size initialization which
 should be done only in SuperSpeed and we were mistakenly setting
 Burst Size to the maximum value on non-SuperSpeed mode. Again,
 since we never saw any problems caused by that, we're not sending
 this patch to stable.
 
 There's also a memory ordering fix regarding usage of bitmaps in
 dwc3 driver.
 
 You will also find some sparse warnings fix, a fix for missed
 isochronous packets when the endpoint is already busy, and a
 fix for synchronization delay on dwc3_stop_active_transfer().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQThLOAAoJEIaOsuA1yqREPB0P/igbry8UxYEfFA6+ojRmeS3x
 AztAUUixXsl44lQOLtl/VSuKqvhiIJ7VniBgL+nj1HdeJPMG6bdjBLwl2LjYBCQq
 xZbv07isqHqg8ntiGwOADQztU7p4BPGpDztogsTlNjUhclCvUwE9ZTf4Moe7Cnk8
 TePUypvt3WQceWBpZxMd9Zirpmls0UTUW287OgQ+ik6QccokzQXxfzD5z3tS0bwo
 nRjWReihPJU68p5wcbILjo4VmhBsllYrRxB8CIatqxfjj6OssJ0ifcO6+jn7bnc5
 T8OStPK8FigTLdNuV4sx3MCu9ItSY1+Y+gRnfXpdbkEqU303qI/rOC0jnmEhAhr1
 /mS9llhCkfknpvL/DSlQnYzwfNA4wFjTLNoxOEDNkYNE84T+YAfZI1DGBvwJoYlZ
 NELQTJB2enVADmMyOwQcXwx7wu2uW7Sb6FcbYpIsZyADZVJPqtjG1o09d19xL0z5
 YdP23D/A6/I6SySvW8cDy9F3ouCQfrkeEd71KF2+4s7zHZhU9cqFA65xOZ7FRB++
 nUsTHCn07doqp+5vsRLV0BKPk3YH9mEg0aVv4ClSE57wZFPFAqXU5GtEgJ9mBAnv
 3poV22oTvGdWuG3vzAAk83pnQPyxxv4DgDLc3gaKZXhecLDRp0O4uucuHrmyV5tn
 eynhmX9bDB5hLGN5KJtX
 =Lqwl
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: patches for v3.7 merge window

Some much needed changes for our dwc3 driver. First there's a
rework on the ep0 handling due to some Silicon issue we uncovered
which affects all users of this IP core (there's a missing
XferNotReady(DATA) event in some conditions). This issue which
show up as a SETUP transfers which wouldn't complete ever and
we would fail TD 7.06 of the Link Layer Test from USB-IF and
Lecroy's USB3 Exerciser.

We also fix a long standing bug regarding EP0 enable sequencing
where we weren't setting a particular bit (Ignore Sequence
Number). Since we never saw any problems caused by that, it
didn't deserve being sent to stable tree.

On this pull request we also fix Burst Size initialization which
should be done only in SuperSpeed and we were mistakenly setting
Burst Size to the maximum value on non-SuperSpeed mode. Again,
since we never saw any problems caused by that, we're not sending
this patch to stable.

There's also a memory ordering fix regarding usage of bitmaps in
dwc3 driver.

You will also find some sparse warnings fix, a fix for missed
isochronous packets when the endpoint is already busy, and a
fix for synchronization delay on dwc3_stop_active_transfer().
2012-09-11 13:52:48 -07:00
Greg Kroah-Hartman
dcb9cf39c5 usb: xceiv: patches for v3.7 merge window
nop xceiv got its own header to avoid polluting otg.h. It has also
 learned to work as USB2 and USB3 phys so we can use it on USB3
 controllers.
 
 Together with those two changes to nop xceiv, we're adding basic
 PHY support to dwc3 driver, this is to allow platforms which actually
 have a SW-controllable PHY talk to them through dwc3 driver.
 
 We're adding a new phy driver for the OMAP architecture. This driver
 is for the PHY found in OMAP4 SoCs, and a new phy driver for the
 marvell architecture. An extra phy driver - for Tegra SoCs - is now
 moving from arch/arm/mach-tegra* to drivers/usb/phy.
 
 Also here, there's the creation of <linux/usb/phy.h> which should be
 used from now on for PHY drivers, even those which don't support
 OTG.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQThmRAAoJEIaOsuA1yqRE2U4P+gJHJsQZUIqTkCi6GyutMLUX
 HUYVgaCXAbt4sSB5s0OK7AsB8uQ82GO6ZGyPfxNlYr6LXYlQWZ1OIig8PNhyn4en
 lt0TolGL53fDOrwvQ0MIJBB1rgCk81UoFwJaPYkhKDNQLndl4hxlrFTsAvaIu7H0
 pMMLt3E0Jz7018NxvVN23OV3EXnb2GF9K2Jt/NJNkZPanJaWXz0T/6DvBG24du2x
 t3ALiKnpAC51wHPB5T88tefmVNApz7DPwK/Bm/VKW66LZ61Y+nZtZ+QMxj//uTt9
 c3JXCvGscKSBcSfSFNMeYBdiPOZIFXTRVLr7CzxplvY9j5u8DTGArz5nvj/8ajbW
 OeU0DMMaStfFqd12/BFUQeixbH8NUSoR5luWVMzBhB5+MF493gHvsu2ooorpR2hP
 jQgMY146RdVbXNDJmuLRlVZbHQZfJBqvVUpk+3mdSSOtpy4IpKvlzPkYL1YjyOMt
 x8WF+shSBvOMhg5C/HlGbDLzTiTv8zWef/aJ7OP9yUwYIz/map3lax749+M0Yzcj
 trQgbLYrc8OeMVuCYGqjw1m96/YmcIxvzI/OnAMPbrPxK2hjy5jAu64/gOAZiZNY
 oQis5G5qw/24LkXfLNQFTl8nYmaDko03+wazCg39D11bWZbLgKs9YJPZd78EwpJy
 s+gU0+RYAQHgo+EChLY+
 =/qVp
 -----END PGP SIGNATURE-----

Merge tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: xceiv: patches for v3.7 merge window

nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.

Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.

We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.

Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.
2012-09-11 13:48:01 -07:00
Felipe Balbi
51e1e7bcef usb: dwc3: add basic PHY support
this will let us control PHYs on platforms which
need them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:43 +03:00
Felipe Balbi
d720f057fd usb: dwc3: exynos: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:42 +03:00
Felipe Balbi
a418cc4ea5 usb: dwc3: omap: add nop transceiver support
We will be adding support for transceivers on
dwc3 driver but not all boards have controllable
transceivers.

For those which don't provide controllable transceivers
we will register nop transceivers.

Note that once OMAP's transceiver drivers reach mainline,
this glue layer will change accordingly.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:42 +03:00