If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq(). The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().
That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.
If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.
Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
The printk in early_irq_init() is cryptic and badly formatted:
NR_IRQS:33024 nr_irqs:968 16
The last number is the number of preallocated interrupts, so add a prefix
to it:
NR_IRQS: 33024, nr_irqs: 968, preallocated irqs: 16
Cleanup the formatting for better readability as well.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494318849-6733-1-git-send-email-vincent.legoll@gmail.com
In order to ease debug, let's populate the domain name upfront, before any
MSI gets requested. This allows the domain to appear in the
irq_domain_mapping, and the user to easily find the expected data.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170512115538.10767-4-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the system is using ACPI, there is no of_node to display. But ACPI can
use a struct irqchip_fwid as a domain identifier, and it can be used to
display the name contained in that structure.
The output on such a system will look like this:
pMSI 0 0 0 irqchip@00000000e1180000
MSI 37 0 0 irqchip@00000000e1180000
GICv2m 37 0 0 irqchip@00000000e1180000
GICv2 448 448 0 irqchip@ffff000008003000
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170512115538.10767-3-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Hierarchical domains seem to be hard to grasp, and a number of
aspiring kernel hackers find them utterly discombobulating.
In order to ease their pain, let's make them appear in
/sys/kernel/debug/irq_domain_mapping, such as the following:
96 0x81808 MSI 0x (null) RADIX MSI
96+ 0x00063 GICv2m 0xffff8003ee116980 RADIX GICv2m
96+ 0x00063 GICv2 0xffff00000916bfd8 LINEAR GICv2
[output compressed to fit in a commit log]
This shows that IRQ96 is implemented by a stack of three domains,
the + sign indicating the stacking.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170512115538.10767-2-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull irq fixes from Thomas Gleixner:
"A set of small fixes for the irq subsystem:
- Cure a data ordering problem with chained interrupts
- Three small fixlets for the mbigen irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix chained interrupt data ordering
irqchip/mbigen: Fix the clear register offset calculation
irqchip/mbigen: Fix potential NULL dereferencing
irqchip/mbigen: Fix memory mapping code
irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.
That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.
Cure it by storing handler data before installing the chained handler.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
ags00JtMLitfNPBH3eSl
=eE4D
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)
- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)
- clean up and unify mmap of PCI BARs (David Woodhouse)
- export and unify Function Level Reset support (Christoph Hellwig)
- avoid FLR for Intel 82579 NICs (Sasha Neftin)
- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)
- short-circuit config access failures for disconnected devices (Keith
Busch)
- remove D3 sleep delay when possible (Adrian Hunter)
- freeze PME scan before suspending devices (Lukas Wunner)
- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)
- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)
- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)
- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)
- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)
- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)
- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)
- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)
- add i.MX7D support (Andrey Smirnov)
- use generic MSI support for Aardvark (Thomas Petazzoni)
- make Rockchip driver modular (Brian Norris)
- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)
- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)
- convert atomic_t to refcount_t in HV driver (Elena Reshetova)
- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)
- fix PCI bus removal in HV driver (Long Li)
- add support for ThunderX2 DMA alias topology (Jayachandran C)
- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)
- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)
- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)
* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...
Pull irq updates from Thomas Gleixner:
"Nothing exciting from the irq side for this merge window:
- a new driver for a Mediatek SoC
- ACPI support for ARM GICV3
- support for shared nested interrupts
- the usual pile of fixes and updates all over te place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/mbigen: Fix return value check in mbigen_device_probe()
irqchip/mips-gic: Replace static map with dynamic
irqchip/mips-gic: Remove device IRQ domain
irqchip/mips-gic: Separate IPI reservation & usage tracking
genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs
genirq: Use cpumask_available() for check of cpumask variable
cpumask: Add helper cpumask_available()
irqchip/irq-imx-gpcv2: Clear OF_POPULATED flag
irqchip/atmel-aic5: Handle suspend to RAM
irqchip: Add Mediatek mtk-cirq driver
dt-bindings: mtk-cirq: Add binding document
irqchip/gic-v3-its: Add IORT hook for platform MSI support
irqchip/mbigen: Add ACPI support
irqchip/mbigen: Introduce mbigen_of_create_domain()
irqchip/mbigen: Drop module owner
platform-msi: Make platform_msi_create_device_domain() ACPI aware
irqchip/gicv3-its: platform-msi: Scan MADT to create platform msi domain
irqchip/gicv3-its: platform-msi: Refactor its_pmsi_init() to prepare for ACPI
irqchip/gicv3-its: platform-msi: Refactor its_pmsi_prepare()
irqchip/gic-v3-its: Keep the include header files in alphabetic order
...
The vectors_per_node is calculated from the remaining available vectors.
The current vector starts after pre_vectors, so we need to subtract that
from the current to properly account for the number of remaining vectors
to assign.
Fixes: 3412386b53 ("irq/affinity: Fix extra vecs calculation")
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Link: http://lkml.kernel.org/r/1492645870-13019-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This allows callers to get back at them instead of having to store it in
another variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction
flags get filled with the trigger type from the irq_data:
if (!(new->flags & IRQF_TRIGGER_MASK))
new->flags |= irqd_get_trigger_type(&desc->irq_data);
On the first setup_irq() the trigger type in irq_data is NONE when the
above code executes, then the irq is started up for the first time and
then the actual trigger type gets established, but that's too late to fix
up new->flags.
When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE
its irqaction's triggertype gets set to the actual trigger type and the
following check fails:
if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))
Resulting in the request_irq failing with -EBUSY even though both
users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE
Fix this by comparing the new irqaction's trigger type to the trigger type
stored in the irq_data which correctly reflects the actual trigger type
being used for the irq.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This fixes the following clang warning when CONFIG_CPUMASK_OFFSTACK=n:
kernel/irq/manage.c:839:28: error: address of array
'desc->irq_common_data.affinity' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Michael Davidson <md@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170412182030.83657-2-mka@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This fixes a math error calculating the extra_vecs. The error assumed
only 1 cpu per vector, but the value needs to account for the actual
number of cpus per vector in order to get the correct remainder for
extra CPU assignment.
Fixes: 7bf8222b9b ("irq/affinity: Fix CPU spread for unbalanced nodes")
Reported-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Link: http://lkml.kernel.org/r/1492104492-19943-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The irq_create_affinity_masks routine is responsible for assigning a
number of interrupt vectors to CPUs. The optimal assignemnet will spread
requested vectors to all CPUs, with the fewest CPUs sharing a vector.
The algorithm may fail to assign some vectors to any CPUs if a node's
CPU count is lower than the average number of vectors per node. These
vectors are unusable and create an un-optimal spread.
Recalculate the number of vectors to assign at each node iteration by using
the remaining number of vectors and nodes to be assigned, not exceeding the
number of CPUs in that node. This will guarantee that every CPU is assigned
at least one vector.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/1491247553-7603-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On a specific audio system an interrupt input of an audio CODEC is used as a
shared interrupt. That interrupt input is handled by a CODEC specific irq
chip driver and triggers a CPU interrupt via the CODEC irq output line.
The CODEC interrupt handler demultiplexes the CODEC interrupt inputs and
the interrupt handlers for these demultiplexed inputs run nested in the
context of the CODEC interrupt handler.
The demultiplexed interrupts use handle_nested_irq() as their interrupt
handler, which unfortunately has no support for shared interrupts. So the
above hardware cannot be supported.
Add shared interrupt support to handle_nested_irq() by iterating over the
interrupt action chain.
[ tglx: Massaged changelog ]
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: patches@opensource.wolfsonmicro.com
Link: http://lkml.kernel.org/r/1488904098-5350-1-git-send-email-ckeepax@opensource.wolfsonmicro.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
But first update usage sites with the new header dependency.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to move scheduler ABI details to <uapi/linux/sched/types.h>,
which will be used from a number of .c files.
Create empty placeholder header that maps to <linux/types.h>.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changes include:
* KVM PCIe/MSI passthrough support on ARM/ARM64
* Introduction of a core representation for individual hardware
iommus
* Support for IOMMU privileged mappings as supported by some
ARM IOMMUS
* 16-bit SID support for ARM-SMMUv2
* Stream table optimization for ARM-SMMUv3
* Various fixes and other small improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5b3I
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU UPDATES from Joerg Roedel:
- KVM PCIe/MSI passthrough support on ARM/ARM64
- introduction of a core representation for individual hardware iommus
- support for IOMMU privileged mappings as supported by some ARM IOMMUS
- 16-bit SID support for ARM-SMMUv2
- stream table optimization for ARM-SMMUv3
- various fixes and other small improvements
* tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits)
vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()
iommu: Remove iommu_register_instance interface
iommu/exynos: Make use of iommu_device_register interface
iommu/mediatek: Make use of iommu_device_register interface
iommu/msm: Make use of iommu_device_register interface
iommu/arm-smmu: Make use of the iommu_register interface
iommu: Add iommu_device_set_fwnode() interface
iommu: Make iommu_device_link/unlink take a struct iommu_device
iommu: Add sysfs bindings for struct iommu_device
iommu: Introduce new 'struct iommu_device'
iommu: Rename struct iommu_device
iommu: Rename iommu_get_instance()
iommu: Fix static checker warning in iommu_insert_device_resv_regions
iommu: Avoid unnecessary assignment of dev->iommu_fwspec
iommu/mediatek: Remove bogus 'select' statements
iommu/dma: Remove bogus dma_supported() implementation
iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space
iommu/vt-d: Don't over-free page table directories
iommu/vt-d: Tylersburg isoch identity map check is done too late.
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
...
Pull irq updates from Thomas Gleixner:
"This update provides:
- Yet another two irq controller chip drivers
- A few updates and fixes for GICV3
- A resource managed function for interrupt allocation
- Fixes, updates and enhancements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom: Fix error handling
genirq: Clarify logic calculating bogus irqreturn_t values
genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
genirq/devres: Use dev_name(dev) as default for devname
genirq: Fix /proc/interrupts output alignment
irqdesc: Add a resource managed version of irq_alloc_descs()
irqchip/gic-v3-its: Zero command on allocation
irqchip/gic-v3-its: Fix command buffer allocation
irqchip/mips-gic: Fix local interrupts
irqchip: Add a driver for Cortina Gemini
irqchip: DT bindings for Cortina Gemini irqchip
irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS
irqchip/gic-v3-its: Rename MAPVI to MAPTI
irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU
irqchip/gic-v3-its: Refactor command encoding
irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints
irqchip/qcom: Add IRQ combiner driver
ACPI: Add support for ResourceSource/IRQ domain mapping
ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
irq/platform-msi: Fix comment about maximal MSIs
Although irqreturn_t is an enum, we treat it (and its enumeration
constants) as a bitmask.
However, bad_action_ret() uses a less-than operator to determine whether
an irqreturn_t falls within allowable bit values, which means we need to
know the signededness of an enum type to read the logic, which is
implementation-dependent.
This change explicitly uses an unsigned type for the comparison. We do
this instead of changing to a bitwise test, as the latter compiles to
increased instructions in this hot path.
It looks like we get the correct behaviour currently (bad_action_ret(-1)
returns 1), so this is purely a readability fix.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Link: http://lkml.kernel.org/r/1487219049-4061-1-git-send-email-jk@ozlabs.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Allow the devname parameter to be NULL and use dev_name(dev) in this case.
This should be an appropriate default for most use cases.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: http://lkml.kernel.org/r/05c63d67-30b4-7026-02d5-ce7fb7bc185f@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the irq_desc being output does not have a domain associated the
information following the 'name' is not aligned correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: http://lkml.kernel.org/r/20170210165416.5629-1-hsweeten@visionengravers.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since commit f3b0946d62 ("genirq/msi: Make sure PCI MSIs are
activated early"), we can end-up activating a PCI/MSI twice (once
at allocation time, and once at startup time).
This is normally of no consequences, except that there is some
HW out there that may misbehave if activate is used more than once
(the GICv3 ITS, for example, uses the activate callback
to issue the MAPVI command, and the architecture spec says that
"If there is an existing mapping for the EventID-DeviceID
combination, behavior is UNPREDICTABLE").
While this could be worked around in each individual driver, it may
make more sense to tackle the issue at the core level. In order to
avoid getting in that situation, let's have a per-interrupt flag
to remember if we have already activated that interrupt or not.
Fixes: f3b0946d62 ("genirq/msi: Make sure PCI MSIs are activated early")
Reported-and-tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This new function checks whether all MSI irq domains
implement IRQ remapping. This is useful to understand
whether VFIO passthrough is safe with respect to interrupts.
On ARM typically an MSI controller can sit downstream
to the IOMMU without preventing VFIO passthrough.
As such any assigned device can write into the MSI doorbell.
In case the MSI controller implements IRQ remapping, assigned
devices will not be able to trigger interrupts towards the
host. On the contrary, the assignment must be emphasized as
unsafe with respect to interrupts.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now we have a flag value indicating an IRQ domain implements MSI,
let's set it on msi_create_irq_domain().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We introduce two new enum values for the irq domain flag:
- IRQ_DOMAIN_FLAG_MSI indicates the irq domain corresponds to
an MSI domain
- IRQ_DOMAIN_FLAG_MSI_REMAP indicates the irq domain has MSI
remapping capabilities.
Those values will be useful to check all MSI irq domains have
MSI remapping support when assessing the safety of IRQ assignment
to a guest.
irq_domain_hierarchical_is_msi_remap() allows to check if an
irq domain or any parent implements MSI remapping.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 34c3d9819f ("genirq/affinity: Provide smarter irq spreading
infrastructure") introduced a better IRQ spreading mechanism, taking
account of the available NUMA nodes in the machine.
Problem is that the algorithm of retrieving the nodemask iterates
"linearly" based on the number of online nodes - some architectures
present non-linear node distribution among the nodemask, like PowerPC.
If this is the case, the algorithm lead to a wrong node count number
and therefore to a bad/incomplete IRQ affinity distribution.
For example, this problem were found in a machine with 128 CPUs and two
nodes, namely nodes 0 and 8 (instead of 0 and 1, if it was linearly
distributed). This led to a wrong affinity distribution which then led to
a bad mq allocation for nvme driver.
Finally, we take the opportunity to fix a comment regarding the affinity
distribution when we have _more_ nodes than vectors.
Fixes: 34c3d9819f ("genirq/affinity: Provide smarter irq spreading infrastructure")
Reported-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: hch@lst.de
Link: http://lkml.kernel.org/r/1481738472-2671-1-git-send-email-gpiccoli@linux.vnet.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull irq updates from Thomas Gleixner:
"The irq department provides:
- a major update to the auto affinity management code, which is used
by multi-queue devices
- move of the microblaze irq chip driver into the common driver code
so it can be shared between microblaze, powerpc and MIPS
- a series of updates to the ARM GICV3 interrupt controller
- the usual pile of fixes and small improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
powerpc/virtex: Use generic xilinx irqchip driver
irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided
irqchip/xilinx: Add support for parent intc
irqchip/xilinx: Rename get_irq to xintc_get_irq
irqchip/xilinx: Restructure and use jump label api
irqchip/xilinx: Clean up print messages
microblaze/irqchip: Move intc driver to irqchip
ARM: virt: Select ARM_GIC_V3_ITS
ARM: gic-v3-its: Add 32bit support to GICv3 ITS
irqchip/gic-v3-its: Specialise readq and writeq accesses
irqchip/gic-v3-its: Specialise flush_dcache operation
irqchip/gic-v3-its: Narrow down Entry Size when used as a divider
irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility
irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154
irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s
genirq/msi: Drop artificial PCI dependency
irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
genirq/affinity: Use default affinity mask for reserved vectors
genirq/affinity: Take reserved vectors into account when spreading irqs
PCI: Remove the irq_affinity mask from struct pci_dev
...
The generic MSI layer doesn't have any PCI ties anymore, and the
build hack should have been removed some time ago.
Fixes: d9109698be ("genirq: Introduce msi_domain_alloc/free_irqs()")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1479806476-20801-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The reserved vectors at the beginning and the end of the vector space get
cpu_possible_mask assigned as their affinity mask.
All other non-auto affine interrupts get the default irq affinity mask
assigned. Using cpu_possible_mask breaks that rule.
Treat them like any other interrupt and use irq_default_affinity as target
mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
The recent addition of reserved vectors at the beginning or the end of the
vector space did not take the reserved vectors at the beginning into
account for the various loop exit conditions. As a consequence the last
vectors of the spread area are not included into the spread algorithm and
are treated like the reserved vectors at the end of the vector space and
get the default affinity mask assigned.
Sum up the affinity vectors and the reserved vectors at the beginning and
use the sum as exit condition.
[ tglx: Fixed all conditions instead of only one and massaged changelog ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/1479201178-29604-2-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Only calculate the affinity for the main I/O vectors, and skip the
pre or post vectors specified by struct irq_affinity.
Also remove the irq_affinity cpumask argument that has never been used.
If we ever need it in the future we can pass it through struct
irq_affinity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Only calculate the affinity for the main I/O vectors, and skip the pre or
post vectors specified by struct irq_affinity.
Also remove the irq_affinity cpumask argument that has never been used. If
we ever need it in the future we can pass it through struct irq_affinity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The type flags in the irq descriptor are there for historical reasons and
only updated via irq_modify_status() or irq_set_type(). Both functions also
update the type flags in irqdata. __setup_irq() is the only left over user
of the type flags in the irq descriptor.
If __setup_irq() is called with empty irq type flags, then the type flags
are retrieved from irqdata. If an interrupt is shared, then the type flags
are compared with the type flags stored in the irq descriptor.
On x86 the ioapic does not have a irq_set_type() callback because the type
is defined in the BIOS tables and cannot be changed. The type is stored in
irqdata at setup time without updating the type data in the irq
descriptor. As a result the comparison described above fails.
There is no point in updating the irq descriptor flags because the only
relevant storage is irqdata. Use the type flags from irqdata for both
retrieval and comparison in __setup_irq() instead.
Aside of that the print out in case of non matching type flags has the old
and new type flags arguments flipped. Fix that as well.
For correctness sake the flags stored in the irq descriptor should be
removed, but this is beyond the scope of this bugfix and will be done in a
later patch.
Fixes: 4b357daed6 ("genirq: Look-up trigger type if not specified by caller")
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The TPS65217 driver grew interrupt support which uses
irq_set_parent(). While it's not yet clear why this is used in the first
place, building the driver as a module fails with:
ERROR: ".irq_set_parent" [drivers/mfd/tps65217.ko] undefined!
The correctness of the driver change is still investigated, but for now
it's less trouble to export irq_set_parent() than dealing with the build
wreckage.
[ tglx: Rewrote changelog and made the export GPL ]
Fixes: 6556bdacf6 ("mfd: tps65217: Add support for IRQs")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: http://lkml.kernel.org/r/1475775403-27207-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fixes the following sparse warning:
kernel/irq/chip.c:786:1: warning:
symbol '__irq_do_set_handler' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no point in trying to configure the trigger of a chained
interrupt if no trigger information has been configured. At best
this is ignored, and at the worse this confuses the underlying
irqchip (which is likely not to handle such a thing), and
unnecessarily alarms the user.
Only apply the configuration if type is not IRQ_TYPE_NONE.
Fixes: 1e12c4a939 ("genirq: Correctly configure the trigger on chained interrupts")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com
Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current irq spreading infrastructure is just looking at a cpumask and
tries to spread the interrupts over the mask. Thats suboptimal as it does
not take numa nodes into account.
Change the logic so the interrupts are spread across numa nodes and inside
the nodes. If there are more cpus than vectors per node, then we set the
affinity to several cpus. If HT siblings are available we take that into
account and try to set all siblings to a single vector.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: axboe@fb.com
Cc: keith.busch@intel.com
Cc: agordeev@redhat.com
Cc: linux-block@vger.kernel.org
Link: http://lkml.kernel.org/r/1473862739-15032-3-git-send-email-hch@lst.de
For irq spreading want to store affinity masks in the msi_entry. Add the
infrastructure for it.
We allocate an array of cpumasks with an array size of the number of used
vectors in the entry, so we can hand in the information per linux interrupt
later.
As we hand in the number of used vectors, we assign them right
away. Convert all the call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@fb.com
Cc: keith.busch@intel.com
Cc: agordeev@redhat.com
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de
- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Xhg0
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Merge the first drop of irqchip updates for 4.9 from Marc Zyngier:
- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups
