Commit Graph

2598 Commits

Author SHA1 Message Date
Linus Torvalds
d31d295409 Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  drm: add initial r500 drm support
  radeon: setup the ring buffer fetcher to be less agressive.
  drm: fixup some of the ioctl function exit paths
  drm: the drm really should call pci_set_master..
  i915: Add chipset id for Intel Integrated Graphics Device
  drm: cleanup DRM_DEBUG() parameters
  drm/i915: add support for E7221 chipset
  drm: don't cast a pointer to pointer of list_head
  mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
  drm: add _DRM_DRIVER flag, and re-order unload.
  drm: enable udev node creation
  drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
  drm: move drm_mem_init to proper place in startup sequence
  drm: call driver load function after initialising AGP
  drm: Fix ioc32 compat layer
  drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
  i915: add suspend/resume support
  drm: update DRM sysfs support
  drm: Initialize the AGP structure's base address at init rather than enable.
  drm: move two function extern into the correct block
  ...
2008-02-07 09:07:16 -08:00
Linus Torvalds
3796958130 Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...
2008-02-07 09:02:26 -08:00
Jiri Slaby
80ff8a8051 Char: mxser, add support for CP-114UL
Add new card (0x1393:0x1143) support added in 1.11 original driver, also
allow rate change in set_serial_info ioctl (as per 1.11 too).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:35 -08:00
Jiri Slaby
1c45607ad3 Char: mxser, remove it
(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007.
Remove it by renaming mxser_new to mxser.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
f122bfb5a4 Char: mxser, ioctl cleanup
- remove dead MOXA_GET_CONF (always returned -ENXIO)
- remove useless MOXA_GET_CUMAJOR (unused)
- use get/put_user instead of copy_from/to_user for simple types
- cleanup TIOCMIWAIT -- return -ERESTARTSYS on signal, move condition into
  separate function

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
f83bb2d40a Char: mxser, simplify mxser_get_serial_info
Initialize temp structure directly with proper values without first zeroing
it and setting later as suggested by Jan.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
0ecd233bb6 Char: mxser, reorder mxser_cardinfo fields
Reorder fields to save some memory and code on 64bit due to alignment as
suggested by Jan.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
c3667d5c32 Char: mxser, 0 to NULL in pointer
Don't test a pointer against 0. Use NULL instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
d7f549fa14 Char: mxser, remove special baudrate processing
Let the special baudrate processing on the tty layer.  Also remove
set/get_special_rate ioctls introduced in commit
f64c84a166, since it is no longer needed.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Alan Cox
f29e37c076 mxser/mxser_new: first pass over termios reporting for the mxser cards
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
b98e70de78 Char: riscom8, remove wakeup and hangup bottomhalves
Both of them may be called directly from the code, don't add special code
and variables and schedule a work for them.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
3099bbc594 Char: serial167, remove bottomhalf
- Cy_EVENT_OPEN_WAKEUP is simple wake_up
- Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work
- Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
ccfea3c98a Char: stallion, remove bottomhalf
- tty_hangup schedules a bottomhalf itself, tty_wakeup doesn't need it
- call the CD code (part of work handler previously) directly from the code
  (it wakes somebody up or calls tty_hangup at worse)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
d0d4e1c098 Char: specialix, remove bottomhalves
- tqueue is used only for tty_wakeup, call it directly from the code
- tqueue_hangup for tty_hangup, it schedules its own work, use it directly
  too

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
cfccaeea62 Char: istallion, remove hangup bottomhalf
tty_hangup schedules a work for hangup itself, no need to do it in the driver.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
d2e7a4b66d Char: esp, remove hangup and wakeup bottomhalves
There is no need to schedule a bottomhalf for either of them. One is fast
and the another schedules a bottomhalf itself.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:34 -08:00
Jiri Slaby
1386a820b3 Char: riscom8, change rc_init_drivers prototype
Let compiler decide if the rc_init_drivers function will be inlined and
mark it as __init, because it's called only from __init function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
319fe7c347 Char: stallion, fix compiler warnings
Don't emit warnings on 64 bit platforms from min(). sizeof() on those
is not uint, neither 2 pointers difference, cast it to uint by min_t in
both cases.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
f31e683505 Char: mxser_new, ioaddresses are ulong
To not pass ulong address as int parameter, switch it to ulong.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
1237a2ef31 Char: char/serial, remove SERIAL_TYPE_NORMAL redefines
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
f6de0c9864 Char: rocket, remove useless macros
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
68562b7921 Char: rocket, printk cleanup
- add KERN_ level to each print
- change some levels appropriately
- add \n at the ends where missing
- change two complex printks into dev_info, where the original info is
  printed automatically

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Jiri Slaby
48a67f5da1 Char: rocket, switch long delay to sleep
Don't busy wait for whole 1s when registering some rocket modems. Sleep
instead since we are not in atomic.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Frank Sorenson
48103c527b i8k: Inspiron E1705 fix
Needs the following in order to work correctly on my Inspiron E1705:

Add DMI Product name to i8k for Dell MP061 hardware (Inspiron 9400/E1705)

Signed-off-by: Frank Sorenson <frank@tuxrocks.com>
Cc: Bradley Smith <bradjsmith@btinternet.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Bradley Smith
fe04f22fd2 I8K: allow i8k driver to be built on x86_64 systems
Adds #if clause and additional inline assembly so that the driver
builds on x86_64 systems.

Signed-off-by: Bradley Smith <bradjsmith@btinternet.com>
Cc: Frank Sorenson <frank@tuxrocks.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:33 -08:00
Matthias Kaehlcke
ae5e29798a MBCS: convert dmareadlock to mutex
MBCS: Convert the semaphore dmareadlock to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:25 -08:00
Matthias Kaehlcke
46bca69682 MBCS: convert dmawritelock to mutex
MBCS: Convert the semaphore dmawritelock to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:25 -08:00
Matthias Kaehlcke
a40ba84957 MBCS: convert algolock to mutex
MBCS: Convert the semaphore algolock to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:25 -08:00
Dave Airlie
3d5e2c13b1 drm: add initial r500 drm support
This adds CP support for the r500 series of chips, and allows
accel 2D support on these chips with a new radeon driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-07 15:13:40 +10:00
Roland Scheidegger
576cc458a6 radeon: setup the ring buffer fetcher to be less agressive.
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:12:07 +10:00
Dave Airlie
9d5b3ffc42 drm: fixup some of the ioctl function exit paths
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:12:00 +10:00
Dave Airlie
19a8f59ab8 drm: the drm really should call pci_set_master..
perhaps bonghits could turn on my bus-mastering because the drm
certainly never bothered doing it before.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:40 +10:00
Zhenyu Wang
5f5f9d4c7b i915: Add chipset id for Intel Integrated Graphics Device
This adds new chipset id in drm.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-07 15:09:40 +10:00
Márton Németh
3e684eae58 drm: cleanup DRM_DEBUG() parameters
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.

airlied:- I cleaned up a few that this patch missed also

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Carlos Martín
4d1f78880e drm/i915: add support for E7221 chipset
E7221 chipset is a server version of the i915.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Li Zefan
d5b0d1b5bd drm: don't cast a pointer to pointer of list_head
The casting is safe only when the list_head member is the first member of
the structure.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Jesper Juhl
a96ca105a6 mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
While reading some code I stumbled across the use of 'err' in
drivers/char/drm/mga_dma.c::mga_do_cleanup_dma() and I think there's a small
problem.

The variable is only used inside #if __OS_HAS_AGP which is fine, but all that
ever happens is an assignment to the variable - it is never actually used for
anything.  The variable is nicely initialized to zero which is also what the
return statement at the end of function returns (always at the moment).

It looks to me like that function should be returning 'err' instead of always
just returning 0.  Here's a patch to do that.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Dave Airlie
e3236a1173 drm: add _DRM_DRIVER flag, and re-order unload.
Allow drivers to addmaps that won't be removed by lastclose or unload.
The unload needs to be re-ordered to avoid removing the hashs before
the driver has removed the final maps.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Dave Airlie
77e27e9fe5 drm: enable udev node creation
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Eric Anholt
b018fcdaa5 drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
Fixes the getclient test and dritest -c.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Dave Airlie
3260f9fdfe drm: move drm_mem_init to proper place in startup sequence
For TTM this needs to be called later.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Dave Airlie
2716a02f60 drm: call driver load function after initialising AGP
needed to intel chipset flushing

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Ian Romanick
7ffa05e051 drm: Fix ioc32 compat layer
Previously any ioctls that weren't explicitly listed in the compat ioctl
table would fail with ENOTTY.  If the incoming ioctl number is outside the
range of the table, assume that it Just Works, and pass it off to drm_ioctl.
This make the fence related ioctls work on 64-bit PowerPC.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:39 +10:00
Eric Anholt
47a184a808 drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
The i830 and newer intel 2D code adds the AGP base to map offsets already,
because it wasn't doing the AGP enable which used to set dev->agp->base.

Credit goes to Zhenyu for finding the issue.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00
Jesse Barnes
ba8bbcf6ff i915: add suspend/resume support
Add suspend/resume support to the i915 driver.  Moves some of the
initialization into the driver load routine, and fixes up places where we
assumed no dev_private existed in some of the cleanup paths.  This allows
us to suspend/resume properly even if X isn't running.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00
Jesse Barnes
e8b962b6df drm: update DRM sysfs support
Make DRM devices use real Linux devices instead of class devices, which are
going away.  While we're at it, clean up some of the interfaces to take
struct drm_device * or struct device * and use the global drm_class where
needed instead of passing it around.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00
Eric Anholt
8b40958032 drm: Initialize the AGP structure's base address at init rather than enable.
Not all drivers call enable (intel), but they would still like to use this
member in driver code.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00
Dave Airlie
ded23359cc drm: move two function extern into the correct block 2008-02-07 15:09:38 +10:00
Dave Airlie
bc5f4523f7 drm: run cleanfile across drm tree
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00
Dave Airlie
8562b3f25d drm: some minor cleanups and changes to make memory manager merging easier.
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07 15:09:38 +10:00