Commit 45d4c6de4e ("leds: gpio: Try to lookup gpiod from device")
removed the common code path that set the led_dat->gpiod pointer in
create_gpio_led(), but only added it back for the devices that have
a valid gpio_led_platform_data structure. Calling gpio_leds_create()
in gpio_led_probe() is not enough to get a valid gpiod pointer.
Fortunately enough, gpio_leds_create() already gets the needed pointer,
we just need to assign it to the relevant gpio_led_data structure.
Fixes: 45d4c6de4e ("leds: gpio: Try to lookup gpiod from device")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This patch implements the 'pattern_set'and 'pattern_clear'
interfaces to support SC27XX LED breathing mode.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.c>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This patch adds a new LED trigger that LED device can configure
to employ software or hardware pattern engine.
Consumers can write 'pattern' file to enable the software pattern
which alters the brightness for the specified duration with one
software timer.
Moreover consumers can write 'hw_pattern' file to enable the hardware
pattern for some LED controllers which can autonomously control
brightness over time, according to some preprogrammed hardware
patterns.
Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
AN30259A is a 3-channel LED driver which uses I2C. It supports timed
operation via an internal PWM clock, and variable brightness. This
driver offers support for basic hardware-based blinking and brightness
control.
The datasheet is freely available:
https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
Signed-off-by: Simon Shields <simon@lineageos.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This augments the GPIO lookup code in the GPIO LEDs to
attempt to look up a GPIO descriptor from the device with
index.
This makes it possible to use GPIO machine look-up tables
and stop passing global GPIO numbers through platform data.
Using this we can stepwise convert existing board files
to use machine descriptor tables and then eventually drop
the legacy GPIO support and only include
<linux/gpio/consumer.h> and use descriptors exclusively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
When probing, if we fail to get the pwm due to probe deferal, we shouldn't
print an error message. Just be silent in this case.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-leds@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Use unsigned int, because it's preferred to unsigned.
Signed-off-by: Kitone Elvis Peter <elviskitone@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
to handle device attributes. Also make use of the module_led_trigger()
helper to simplify trigger registration.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Use the new module_led_trigger() helper. Also use
attribute support from the trigger core. Drop error message on
allocation failure as kzalloc() already screams loudly when failing. Use
wrappers to get and set trigger data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().
Also make use of module_led_trigger() and the accessor function to get
and set trigger_data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This removes some boilerplate from the driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().
Also make use of module_led_trigger() and the accessor function to get
and set trigger_data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().
Also make use of module_led_trigger() and do some minor coding style
improvements.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .trigger_data being non-NULL can go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for trigger_data being non-NULL can go away.
(It was broken before because the core didn't clear .trigger_data, so it
might have been non-NULL even if .activate() failed before.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This helps keeping these two fields consistent and drivers don't need to
care for this themselves any more.
Note that .activated isn't set to true automatically because that might
confuse some triggers when deactivating (e.g. ledtrig-gpio).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
As many triggers use device attributes, add support for these in
led_trigger_set which allows simplifying the drivers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active according to the
"trigger" sysfs attribute but not functional.
All users are changed accordingly to return 0 for now. There is no intended
change in behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
These files are licensed under GPL version 2 only. So use "GPL v2"
instead of "GPL" (which means v2 or later).
Also remove an empty (but commented) line at the end of the license
header which nicely proves in the context that the drivers are really v2
only :-)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The LM36922 has one output but can sync current to 2 LED
strings. The user may only use one sync so the other
syncs need to be disabled.
The LM36923 has 3 LED syncs.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Update the code to use the fwnode calls as opposed
to ARM DT node api's.
This allows the device to be used with either DT
configurations or ACPI definitions.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Update the license header to the current
SPDX licensing format.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Variable mode is assigned to pdata->led_pdata->mode[led->id] and yet
is not being used when calling function max8997_led_set_mode. Fix
this by using mode when calling max8997_led_set_mode.
Cleans up clang warning:
warning: variable 'mode' set but not used [-Wunused-but-set-variable]
Fixes: 8584cb82f1 ("leds: Add suuport for MAX8997-LED driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Update the email address in the module information and in the comments
and in the module information, and drop the existing boilerplate in
favor of a SPDX header.
Also sync the module license information with the header.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
The binding details are described in an earlier commit that adds the
documentation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Clean up the code a bit and transition over to the gpiod based interface.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
In preparation to DT probe functionality, merge create_lt3593_led() into
its only call-site. The DT based setup code will be quite different, so this
internal helper function is of no help.
This also changes the way the driver works by only handling one entry inside
'struct gpio_led_platform_data'. If multiple devices of the same type are
found in a design, there should be a platform device for each of them. The
only mainline user of this driver is not affected by this change.
Last, use devm_led_classdev_register() instead of
led_classdev_register(), so the driver's remove callback can go away.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
All the triggers are defined in a big if LEDS_TRIGGERS...endif block.
So there is no need to let each driver depend on LEDS_TRIGGERS explicitly
once more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
PC Engines apu3 is an improved version of the apu2, using the same SoC
and almost everything else.
This patch reuses as much as possible from the apu2 definitions, to
avoid redundancy.
Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
get_monotonic_boottime() is deprecated, so let's convert this to
the simpler ktime_get_boot_ns().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Introduce the family of LED devices that can
drive a torch, strobe or IR LED.
The LED driver can be configured with a strobe
timer to execute a strobe flash. The IR LED
brightness is controlled via the torch brightness
register.
The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010http://www.ti.com/product/LM36011
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
In case of error, the function dev_get_regmap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: e081c49e30 ("leds: Add Spreadtrum SC27xx breathing light controller driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This patch adds Spreadtrum SC27xx PMIC series breathing light controller
driver, which can support 3 LEDs. Each LED can work at normal PWM mode
and breathing mode.
Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Use sysfs_match_string() helper instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This patch adds a LED class driver for the RGB LEDs found on
the Crane Merchandising System CR0014114 LEDs board.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
BIOS on APU board doesn't expose board_name property, and thus
we have to rely on the product_name instead.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This adds two new disk triggers for triggering on reads
and writes respectively, named "disk-read" and "disk-write".
The use case comes from working on the D-Link DNS-313 NAS
box. This features an RGB LED for disk activity. with
these two triggers I can couple the green LED to read
activity and the red LED to write activity, which gives
the appropriate user feedback about what is happening
on the disk. When tested it gave exactly the feedback
desired.
The in-kernel interface is simply changed to pass a bool
indicating if the activity is write activity and update
each trigger (and the composite "disk-activity" trigger)
depending on what is passed in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
PC Engines "legacy" coreboot 4.0.8 changed the product/board name
from "APU2" to "apu2".
PC Engines "mainline" coreboot uses, instead, "PC Engines apu2" as
product/board name.
This commit adds the 2 variants ("apu2" and "PC Engines apu2") of
product/board name to be compatible with all the APU2 BIOSes.
Fixes: 3faee9423c ("leds: Add driver for PC Engines APU/APU2 LEDs")
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Driver obtains LED devices according to system configuration and creates
devices in form: "devicename:color:function", like
The full path is to be:
/sys/class/leds/mlxreg\:status\:amber/brightness
After timer trigger activation:
echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger
Attributes for LED blinking will appaer in sysfs infrastructure:
/sys/class/leds/mlxreg\:status\:amber/delay_off
/sys/class/leds/mlxreg\:status\:amber/delay_on
LED setting is controlled through the on-board programmable devices,
which exports its register map. This device could be attached to any
bus type, for which register mapping is supported.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
It fixes grammatical errors in Kconfig file for LEDS_SYSCON,
LEDS_MLXCPLD, LEDS_MC13783, LEDS_NETXBIG.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Clarify which controllers are supported by which driver.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
It makes leds-mlxcpld available for 32 bit architecture.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TqNv
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- introduce LM3692x dual string driver
New LED trigger:
- introduce a NETDEV trigger
leds-lp8860:
- various fixes to align with LED framework
- add regulator enable during init
- DT support related improvements
Minor fixes and cleanups to the LED class drivers:
- leds-pwm
- ledtrig-activity
- leds-blinkm
- leds-as3645a
- ledtrig-transient"
* tag 'leds_for_4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: ledtrig-transient: Add SPDX license identifiers
leds: lp8860: Various fixes to align with LED framework
leds: lp8860: Add DT parsing to retrieve the trigger node
dt: bindings: lp8860: Add trigger binding to the lp8860
leds: lp8860: Update the dt parsing for LED labeling
dt: bindings: lp8860: Update DT label binding
dt: bindings: lp8860: Update bindings for lp8860
leds: as3645a: Fix line over 80 characters
leds: as3645a: Fix quoted string split warning
leds: lm3692x: Introduce LM3692x dual string driver
dt: bindings: lm3692x: Add bindings for lm3692x LED driver
leds: trigger: Introduce a NETDEV trigger
leds: blinkm: avoid uninitialized data use
ledtrig-activity: Grammar s/a immediate/an immediate/
leds: pwm: Remove unneeded header file
leds: lp8860: Add regulator enable during init
leds: lp8860: Fix linuxdoc format for structure
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
