[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ]
If an invalid option value is used with "printk.devkmsg=<value>",
it is silently ignored.
If a valid option value is used, it is honored but the wrong return
value (0) is used, indicating that the command line option had an
error and was not handled. This string is not added to init's
environment strings due to init/main.c::unknown_bootoption()
checking for a '.' in the boot option string and then considering
that string to be an "Unused module parameter".
Print a warning message if a bad option string is used.
Always return 1 from the __setup handler to indicate that the command
line option has been handled.
Fixes: 750afe7bab ("printk: add kernel parameter to control writes to /dev/kmsg")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3cffa06aeef7ece30f6b5ac0ea51f264e8fea4d0 upstream.
The commit 48021f9813 ("printk: handle blank console arguments
passed in.") prevented crash caused by empty console= parameter value.
Unfortunately, this value is widely used on Chromebooks to disable
the console output. The above commit caused performance regression
because the messages were pushed on slow console even though nobody
was watching it.
Use ttynull driver explicitly for console="" and console=null
parameters. It has been created for exactly this purpose.
It causes that preferred_console is set. As a result, ttySX and ttyX
are not used as a fallback. And only ttynull console gets registered by
default.
It still allows to register other consoles either by additional console=
parameters or SPCR. It prevents regression because it worked this way even
before. Also it is a sane semantic. Preventing output on all consoles
should be done another way, for example, by introducing mute_console
parameter.
Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com
Cc: Yi Fan <yfa@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13791c80b0cdf54d92fc54221cdf490683b109de ]
If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.
The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.
For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 08d60e5999540110576e7c1346d486220751b7f9 upstream.
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e386ee0c0b71ea6f7238506a4d0965a2dbef11 upstream.
Before the commit 896fbe20b4 ("printk: use the lockless
ringbuffer"), msg_print_text() would only write up to size-1 bytes
into the provided buffer. Some callers expect this behavior and
append a terminator to returned string. In particular:
arch/powerpc/xmon/xmon.c:dump_log_buf()
arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout()
msg_print_text() has been replaced by record_print_text(), which
currently fills the full size of the buffer. This causes a
buffer overflow for the above callers.
Change record_print_text() so that it will only use size-1 bytes
for text data. Also, for paranoia sakes, add a terminator after
the text data.
And finally, document this behavior so that it is clear that only
size-1 bytes are used and a terminator is added.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 89ccf18f032f26946e2ea6258120472eec6aa745 ]
kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
@setup_text_buf only copies the original text messages (without any
prefix or extended text). It only needs to be LOG_LINE_MAX in size.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-3-john.ogness@linutronix.de
If a reader provides a buffer that is smaller than the message text,
the @text_len field of @info will have a value larger than the buffer
size. If readers blindly read @text_len bytes of data without
checking the size, they will read beyond their buffer.
Add this check to record_print_text() to properly recognize when such
truncation has occurred.
Add a maximum size argument to the ringbuffer function to extend
records so that records can not be created that are larger than the
buffer size of readers.
When extending records (LOG_CONT), do not extend records beyond
LOG_LINE_MAX since that is the maximum size available in the buffers
used by consoles and syslog.
Fixes: f5f022e53b ("printk: reimplement log_cont using record extension")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200930090134.8723-2-john.ogness@linutronix.de
Since there is no code that will ever store anything into the dict
ring, remove it. If any future dictionary properties are to be
added, these should be added to the struct printk_info.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-4-john.ogness@linutronix.de
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
The majority of the size of a descriptor is taken up by meta data,
which is often not of interest to the ringbuffer (for example,
when performing state checks). Since descriptors are often
temporarily stored on the stack, keeping their size minimal will
help reduce stack pressure.
Rather than embedding the printk_info into the descriptor, create
a separate printk_info array. The index of a descriptor in the
descriptor array corresponds to the printk_info with the same
index in the printk_info array. The rules for validity of a
printk_info match the existing rules for the data blocks: the
descriptor must be in a consistent state.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
Use the record extending feature of the ringbuffer to implement
continuous messages. This preserves the existing continuous message
behavior.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-7-john.ogness@linutronix.de
prb_reserve() will set some meta data values and leave others
uninitialized (or rather, containing the values of the previous
wrap). Simplify the API by always clearing out all the fields.
Only the sequence number is filled in. The caller is now
responsible for filling in the rest of the meta data fields.
In particular, for correctly filling in text and dict lengths.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-4-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
The commit 625d344978 ("Revert "kernel/printk: add kmsg SEEK_CUR
handling"") reverted a change done to the return value in case a SEEK_CUR
operation was performed for kmsg buffer based on the fact that different
userspace apps were handling the new return value (-ESPIPE) in different
ways, breaking them.
At the same time -ESPIPE was the wrong decision because kmsg /does support/
seek() but doesn't follow the "normal" behavior userspace is used to.
Because of that and also considering the time -EINVAL has been used, it was
decided to keep this way to avoid more userspace breakage.
This patch adds an official statement to the kmsg documentation pointing to
the current return value for SEEK_CUR, -EINVAL, thus userspace libraries
and apps can refer to it for a definitive guide on what to expect.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710174423.10480-1-bmeneg@redhat.com
Replace the existing ringbuffer usage and implementation with
lockless ringbuffer usage. Even though the new ringbuffer does not
require locking, all existing locking is left in place. Therefore,
this change is purely replacing the underlining ringbuffer.
Changes that exist due to the ringbuffer replacement:
- The VMCOREINFO has been updated for the new structures.
- Dictionary data is now stored in a separate data buffer from the
human-readable messages. The dictionary data buffer is set to the
same size as the message buffer. Therefore, the total required
memory for both dictionary and message data is
2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and
2 * log_buf_len (the kernel parameter) for the dynamic buffers.
- Record meta-data is now stored in a separate array of descriptors.
This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes
for the static array and 72 * (log_buf_len >> 5) bytes for the
dynamic array.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-5-john.ogness@linutronix.de
This reverts commit 3ac37a93fa.
This optimization will not apply once the transition to a lockless
printk is complete. Rather than porting this optimization through
the transition only to remove it anyway, just revert it now to
simplify the transition.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200709132344.760-4-john.ogness@linutronix.de
I bet the word 'chance' has to be used in 'had a chance to be called',
but, alas, I'm not native speaker...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-7-andriy.shevchenko@linux.intel.com
Since console ->setup() hook returns meaningful error codes,
propagate it to the caller of try_enable_new_console().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618164751.56828-6-andriy.shevchenko@linux.intel.com
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=+1iq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"One more printk change for 5.8: make sure that messages printed from
KDB context are redirected to KDB console handlers. It did not work
when KDB interrupted NMI or printk_safe contexts.
Arm people started hitting this problem more often recently. I forgot
to add the fix into the previous pull request by mistake"
* tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/kdb: Redirect printk messages into kdb in any context
kdb has to get messages on consoles even when the system is stopped.
It uses kdb_printf() internally and calls console drivers on its own.
It uses a hack to reuse an existing code. It sets "kdb_trap_printk"
global variable to redirect even the normal printk() into the
kdb_printf() variant.
The variable "kdb_trap_printk" is checked in printk_default() and
it is ignored when printk is redirected to printk_safe in NMI context.
Solve this by moving the check into printk_func().
It is obvious that it is not fully safe. But it does not make things
worse. The console drivers are already called in this context by
db_printf() direct calls.
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200520102233.GC3464@linux-b0ei
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
-----BEGIN PGP SIGNATURE-----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=pUBG
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Benjamin Herrenschmidt solved a problem with non-matched console
aliases by first checking consoles defined on the command line. It is
a more conservative approach than the previous attempts.
- Benjamin also made sure that the console accessible via /dev/console
always has CON_CONSDEV flag.
- Andy Shevchenko added the %ptT modifier for printing struct time64_t.
It extends the existing %ptR handling for struct rtc_time.
- Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
SEEK_CUR.
- Tetsuo Handa removed unused pr_cont_once().
... and a few small fixes.
* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove pr_cont_once()
printk: handle blank console arguments passed in.
kernel/printk: add kmsg SEEK_CUR handling
printk: Fix a typo in comment "interator"->"iterator"
usb: pulse8-cec: Switch to use %ptT
ARM: bcm2835: Switch to use %ptT
lib/vsprintf: Print time64_t in human readable format
lib/vsprintf: update comment about simple_strto<foo>() functions
printk: Correctly set CON_CONSDEV even when preferred console was not registered
printk: Fix preferred console selection with multiple matches
printk: Move console matching logic into a separate function
printk: Convert a use of sprintf to snprintf in console_unlock
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.
This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.
Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation
over any file descriptor requested to make sure the current position isn't
pointing to junk due to previous manipulation of that same fd. And whenever
that fd doesn't have support for such operation, the userspace code expects
-ESPIPE to be returned.
However, when the fd in question references the /dev/kmsg interface, the
current kernel code state returns -EINVAL instead, causing an unexpected
behavior in userspace: in the case of glibc, when -ESPIPE is returned it
gets ignored and the call completes successfully, while returning -EINVAL
forces dprintf to fail without performing any action over that fd:
if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) ==
_IO_pos_BAD && errno != ESPIPE)
return NULL;
With this patch we make sure to return the correct value when SEEK_CUR is
requested over kmsg and also add some kernel doc information to formalize
this behavior.
Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org,
Cc: David.Laight@ACULAB.COM
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is a typo in comment, fix it.
Signed-off-by: Ethon Paul <ethp@qq.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit 1b710b1b10 ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.
The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).
Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.
Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CON_CONSDEV flag was historically used to put/keep the preferred console
first in console_drivers list. Where the preferred console is the last
on the command line.
The ordering is important only when opening /dev/console:
+ tty_kopen()
+ tty_lookup_driver()
+ console_device()
The flag was originally an implementation detail. But it was later
made accessible from userspace via /proc/consoles. It was used,
for example, by the tool "showconsole" to show the real tty
accessible via /dev/console, see
https://github.com/bitstreamout/showconsole
Now, the current code sets CON_CONSDEV only for the preferred
console or when a fallback console is added. The flag is not
set when the preferred console is defined on the command line
but it is not registered from some reasons.
Simple solution is to set CON_CONSDEV flag for the first
registered console. It will work most of the time because:
+ Most real consoles have console->device defined.
+ Boot consoles are removed in printk_late_init().
+ unregister_console() moves CON_CONSDEV flag to the next
console.
Clean solution would require checking con->device when the
preferred console is registered and in unregister_console().
Conclusion:
Use the simple solution for now. It is better than the current
state and good enough.
The clean solution is not worth it. It would complicate the already
complicated code without too much gain. Instead the code would deserve
a complete rewrite.
Link: https://lore.kernel.org/r/20200213095133.23176-4-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[pmladek@suse.com: Correct reasoning in the commit message, comment update.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
In the following circumstances, the rule of selecting the console
corresponding to the last "console=" entry on the command line as
the preferred console (CON_CONSDEV, ie, /dev/console) fails. This
is a specific example, but it could happen with different consoles
that have a similar name aliasing mechanism.
- The kernel command line has both console=tty0 and console=ttyS0
in that order (the latter with speed etc... arguments).
This is common with some cloud setups such as Amazon Linux.
- add_preferred_console is called early to register "uart0". In
our case that happens from acpi_parse_spcr() on arm64 since the
"enable_console" argument is true on that architecture. This causes
"uart0" to become entry 0 of the console_cmdline array.
Now, because of the above, what happens is:
- add_preferred_console is called by the cmdline parsing for tty0
and ttyS0 respectively, thus occupying entries 1 and 2 of the
console_cmdline array (since this happens after ACPI SPCR parsing).
At that point preferred_console is set to 2 as expected.
- When the tty layer kicks in, it will call register_console for tty0.
This will match entry 1 in console_cmdline array. It isn't our
preferred console but because it's our only console at this point,
it will end up "first" in the consoles list.
- When 8250 probes the actual serial port later on, it calls
register_console for ttyS0. At that point the loop in register_console
tries to match it with the entries in the console_cmdline array.
Ideally this should match ttyS0 in entry 2, which is preferred, causing
it to be inserted first and to replace tty0 as CONSDEV. However, 8250
provides a "match" hook in its struct console, and that hook will match
"uart" as an alias to "ttyS". So we match uart0 at entry 0 in the array
which is not the preferred console and will not match entry 2 which is
since we break out of the loop on the first match. As a result,
we don't set CONSDEV and don't insert it first, but second in
the console list.
As a result, we end up with tty0 remaining first in the array, and thus
/dev/console going there instead of the last user specified one which
is ttyS0.
This tentative fix register_console() to scan first for consoles
specified on the command line, and only if none is found, to then
scan for consoles specified by the architecture.
Link: https://lore.kernel.org/r/20200213095133.23176-3-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This moves the loop that tries to match a newly registered console
with the command line or add_preferred_console list into a separate
helper, in order to be able to call it multiple times in subsequent
patches.
Link: https://lore.kernel.org/r/20200213095133.23176-2-pmladek@suse.com
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang
warns:
../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always
overflow; destination buffer has size 0, but format string expands to at
least 33 [-Wfortify-source]
len = sprintf(text,
^
1 warning generated.
It is not wrong; text has a zero size when CONFIG_PRINTK is disabled
because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so
that this case is explicitly handled without any risk of overflow.
Link: https://github.com/ClangBuiltLinux/linux/issues/846
Link: 6d485ff455
Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Some consoles might require special operations on unregistering.
For instance, serial console, when registered in the kernel,
keeps power on for entire time, until it gets unregistered.
Example of use:
->setup(console):
pm_runtime_get(...);
->exit(console):
pm_runtime_put(...);
For such cases to have a balance we would provide ->exit() callback.
Link: http://lkml.kernel.org/r/20200203133130.11591-7-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
If console is not on the list then there is nothing for us to do
and sysfs notify is pointless.
Note, that nr_ext_console_drivers is being changed only for listed
consoles.
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20200203133130.11591-6-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are only two callers that use the returned code from
unregister_console():
- unregister_early_console() in arch/m68k/kernel/early_printk.c
- kgdb_unregister_nmi_console() in drivers/tty/serial/kgdb_nmi.c
They both expect to get "0" on success and a non-zero value on error.
But the current behavior is confusing and buggy:
- _braille_unregister_console() returns "1" on success
- unregister_console() returns "1" on error
Fix and clean up the behavior:
- Return success when _braille_unregister_console() succeeded
- Return a meaningful error code when the console was
not registered before
Link: http://lkml.kernel.org/r/20200203133130.11591-5-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
/* find the last or real console */
This comment is misleading. The purpose of the loop is to check
if we are trying to register boot console after a real one has
already been registered. This is already mentioned in a comment
above.
Link: http://lkml.kernel.org/r/20200203133130.11591-4-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[pmladek@suse.com: Updated commit message.]
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We have rather open coded single linked list manipulations where we may
simple use for_each_console() helper with properly set exit conditions.
Replace open coded single-linked list handling with for_each_console()
helper in use.
Link: http://lkml.kernel.org/r/20200203133130.11591-3-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is no need to explicitly check for console_drivers to be non-NULL
since for_each_console() does this.
Link: http://lkml.kernel.org/r/20200203133130.11591-2-andriy.shevchenko@linux.intel.com
To: linux-kernel@vger.kernel.org
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Commit f92b070f2d ("printk: Do not miss new messages when replaying
the log") introduced a new variable @exclusive_console_stop_seq to
store when an exclusive console should stop printing. It should be
set to the @console_seq value at registration. However, @console_seq
is previously set to @syslog_seq so that the exclusive console knows
where to begin. This results in the exclusive console immediately
reactivating all the other consoles and thus repeating the messages
for those consoles.
Set @console_seq after @exclusive_console_stop_seq has stored the
current @console_seq value.
Fixes: f92b070f2d ("printk: Do not miss new messages when replaying the log")
Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
updates:
- Qualcomm PDC wakeup interrupt support
- Layerscape external IRQ support
- Broadcom bcm7038 PM and wakeup support
- Ingenic driver cleanup and modernization
- GICv3 ITS preparation for GICv4.1 updates
- GICv4 fixes
There's also the series from Frederic Weisbecker that fixes memory
ordering bugs for the irq-work logic, whose primary fix is to turn
work->irq_work.flags into an atomic variable and then convert the
complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
much simpler atomic_fetch_or() call.
There are also various smaller cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
pinctrl/msm: Setup GPIO chip in hierarchy
irqchip/qcom-pdc: Add irqchip set/get state calls
irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
irqchip/qcom-pdc: Update max PDC interrupts
of/irq: Document properties for wakeup interrupt parent
genirq: Introduce irq_chip_get/set_parent_state calls
irqdomain: Add bus token DOMAIN_BUS_WAKEUP
genirq: Fix function documentation of __irq_alloc_descs()
irq_work: Fix IRQ_WORK_BUSY bit clearing
irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
irq_work: Slightly simplify IRQ_WORK_PENDING clearing
irq_work: Fix irq_work_claim() memory ordering
irq_work: Convert flags to atomic_t
irqchip: Ingenic: Add process for more than one irq at the same time.
irqchip: ingenic: Alloc generic chips from IRQ domain
irqchip: ingenic: Get virq number from IRQ domain
irqchip: ingenic: Error out if IRQ domain creation failed
irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
...
