forked from luck/tmp_suning_uos_patched
37481ad72d
1349 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paul E. McKenney
|
03a65c14ab |
clocksource: Retry clock read if long delays detected
[ Upstream commit db3a34e17433de2390eb80d436970edcebd0ca3e ] When the clocksource watchdog marks a clock as unstable, this might be due to that clock being unstable or it might be due to delays that happen to occur between the reads of the two clocks. Yes, interrupts are disabled across those two reads, but there are no shortage of things that can delay interrupts-disabled regions of code ranging from SMI handlers to vCPU preemption. It would be good to have some indication as to why the clock was marked unstable. Therefore, re-read the watchdog clock on either side of the read from the clock under test. If the watchdog clock shows an excessive time delta between its pair of reads, the reads are retried. The maximum number of retries is specified by a new kernel boot parameter clocksource.max_cswd_read_retries, which defaults to three, that is, up to four reads, one initial and up to three retries. If more than one retry was required, a message is printed on the console (the occasional single retry is expected behavior, especially in guest OSes). If the maximum number of retries is exceeded, the clock under test will be marked unstable. However, the probability of this happening due to various sorts of delays is quite small. In addition, the reason (clock-read delays) for the unstable marking will be apparent. Reported-by: Chris Mason <clm@fb.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20210527190124.440372-1-paulmck@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
David Hildenbrand
|
8876cc237e |
drivers/base/memory: don't store phys_device in memory blocks
[ Upstream commit e9a2e48e8704c9d20a625c6f2357147d03ea7b97 ] No need to store the value for each and every memory block, as we can easily query the value at runtime. Reshuffle the members to optimize the memory layout. Also, let's clarify what the interface once was used for and why it's legacy nowadays. "phys_device" was used on s390x in older versions of lsmem[2]/chmem[3], back when they were still part of s390x-tools. They were later replaced by the variants in linux-utils. For example, RHEL6 and RHEL7 contain lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux on s390x [4]. "phys_device" was added with sysfs support for memory hotplug in commit |
||
|
Dave Hansen
|
54683f81c8 |
mm/vmscan: restore zone_reclaim_mode ABI
commit 519983645a9f2ec339cabfa0c6ef7b09be985dd0 upstream.
I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation. I noticed that the bits in the documentation didn't
match the bits in the #defines.
The VM never explicitly checks the RECLAIM_ZONE bit. The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'. The
RECLAIM_ZONE #define was removed in a cleanup. That, by itself is fine.
But, when the bit was removed (bit 0) the _other_ bit locations also got
changed. That's not OK because the bit values are documented to mean
one specific thing. Users surely do not expect the meaning to change
from kernel to kernel.
The end result is that if someone had a script that did:
sysctl vm.zone_reclaim_mode=1
it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.
Put the bits back the way they were and add a comment so something like
this is a bit harder to do again. Update the documentation to make it
clear that the first bit is ignored.
Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes:
|
||
|
Robin Murphy
|
1ea83d4891 |
perf/arm-cmn: Fix PMU instance naming
[ Upstream commit 79d7c3dca99fa96033695ddf5d495b775a3a137b ]
Although it's neat to avoid the suffix for the typical case of a
single PMU, it means systems with multiple CMN instances end up with
inconsistent naming. I think it also breaks perf tool's "uncore alias"
logic if the common instance prefix is also the full name of one.
Avoid any surprises by not trying to be clever and simply numbering
every instance, even when it might technically prove redundant.
Fixes:
|
||
|
David Woodhouse
|
a8fddd4192 |
x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery
[ Upstream commit b36b0fe96af13460278bf9b173beced1bd15f85d ] It's useful to be able to test non-vector event channel delivery, to make sure Linux will work properly on older Xen which doesn't have it. It's also useful for those working on Xen and Xen-compatible hypervisors, because there are guest kernels still in active use which use PCI INTX even when vector delivery is available. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Mikulas Patocka
|
9cb683c3c4 |
dm integrity: conditionally disable "recalculate" feature
commit 5c02406428d5219c367c5f53457698c58bc5f917 upstream. Otherwise a malicious user could (ab)use the "recalculate" feature that makes dm-integrity calculate the checksums in the background while the device is already usable. When the system restarts before all checksums have been calculated, the calculation continues where it was interrupted even if the recalculate feature is not requested the next time the dm device is set up. Disable recalculating if we use internal_hash or journal_hash with a key (e.g. HMAC) and we don't have the "legacy_recalculate" flag. This may break activation of a volume, created by an older kernel, that is not yet fully recalculated -- if this happens, the user should add the "legacy_recalculate" flag to constructor parameters. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Oliver Neukum
|
2440c1cb25 |
USB: UAS: introduce a quirk to set no_write_same
commit 8010622c86ca5bb44bc98492f5968726fc7c7a21 upstream. UAS does not share the pessimistic assumption storage is making that devices cannot deal with WRITE_SAME. A few devices supported by UAS, are reported to not deal well with WRITE_SAME. Those need a quirk. Add it to the device that needs it. Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
8a02ec8f35 |
Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8brThQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qiBMAQDe1vsp/SyHO9H5pnsepdmk4fERn0bC Q0qtCoYp1xUKOQEAjnOJKdCE1O6n24u+b+3jw3BHswQLyUKOFaPcIM7jSgM= =Z6kA -----END PGP SIGNATURE----- Merge tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "Have bootconfig size and checksum be little endian In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian" * tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: docs: bootconfig: Add the endianness of fields tools/bootconfig: Store size and checksum in footer as le32 bootconfig: Load size and checksum in the footer as le32 |
||
|
Linus Torvalds
|
ef6900acc8 |
Tracing fixes for 5.10-rc6
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8ZzghQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg0JAQCII1bDQyF3APLlNFRqfHf3bTo7Zl5z
WaUd1Cd7JkY+WAD/eF1dWjN0JRtfU+oRlk6UZ4oNmp8WMJvQ7oV26ub2egE=
=lts8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
|
||
|
Masami Hiramatsu
|
05227490c5 |
docs: bootconfig: Add the endianness of fields
Add a description about the endianness of the size and the checksum fields. Those must be stored as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
dda3f4252e |
powerpc fixes for CVE-2020-4788
From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl+2aqETHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgG+hD/4njSFct2amqWfqDYR9b2OykWmnMQXn geookk5SbItQF7vh1q2SVA6r43s5ZAxgD5fezx4LgG6p3QU39+Tr0RhzUUHWMPDV UNGZK6x/N/GSYeq0bqvMHmVwS0FDjPE8nOtA8Hn2T9mUUsu9G0okpgYPLnEu6rb1 gIyS35zlLBh9obi3MfJzyln/AmCE7hdonKRtLAxvGiERJAyfAG757lrdjrwavyHy mwz+XPl5PF88jfO5cbcZT9gNHmZZPzVsOVwNcstCh2FcwuePv9dWe1pxsBxxKqP5 UXceXPcKM7VlRNmehimq7q/hfbget4RJGGKYPNXeKHOo6yfy7lJPiQV4h+5z2pSs SPP2fQQPq0aubmcO23CXFtZl4WRHQ4pax6opepnpIfC2vZ0HLXJtPrhMKcbFJNTo qPis6HWQPpIuI6l4MJfs+YO9ETxCR31Yd28qFAfPFoHlnQZTfx6NPhw8HKxTbSh2 Svr4X6Y14j3UsQgLTCArCXWAG/hlfRwxDZJ4AvR9EU0HJGDyZ45Y+LTD1N8bbsny zcYfPqWGPIanLcNPNFYIQwDZo7ff08KdmngUvf/Q9om60mP1hsPJMHf6VhPXj4fC 2TZ11fORssSlBSNtIkFkbjEG+aiWtWnz3fN3uSyT50rgGwtDHJzVzLiUWHlZKcxW X73YdxuT8fqQwg== =Yibq -----END PGP SIGNATURE----- Merge tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for CVE-2020-4788. From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups" * tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations selftests/powerpc: refactor entry and rfi_flush tests selftests/powerpc: entry flush test powerpc: Only include kup-radix.h for 64-bit Book3S powerpc/64s: flush L1D after user accesses powerpc/64s: flush L1D on kernel entry selftests/powerpc: rfi_flush: disable entry flush if present |
||
|
Masami Hiramatsu
|
fbc6e1c6e0 |
docs: bootconfig: Update file format on initrd image
To align the total file size, add padding null character when appending the bootconfig to initrd image. Link: https://lkml.kernel.org/r/160576522916.320071.4145530996151028855.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Nicholas Piggin
|
9a32a7e78b |
powerpc/64s: flush L1D after user accesses
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
Nicholas Piggin
|
f79643787e |
powerpc/64s: flush L1D on kernel entry
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
|
Linus Torvalds
|
f786dfa374 |
Power management fixes for 5.10-rc3.
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy
limits updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal
of OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping
driver (Tom Rix).
-----BEGIN PGP SIGNATURE-----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=lKQA
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
||
|
Linus Torvalds
|
e6b0bd61a7 |
This pull contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP 1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS 8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ= =hDfp -----END PGP SIGNATURE----- Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux Pull documentation build warning fixes from Jonathan Corbet: "This contains a series of warning fixes from Mauro; once applied, the number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week" * tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits) docs: SafeSetID: fix a warning amdgpu: fix a few kernel-doc markup issues selftests: kselftest_harness.h: fix kernel-doc markups drm: amdgpu_dm: fix a typo gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups drm: amdgpu: kernel-doc: update some adev parameters docs: fs: api-summary.rst: get rid of kernel-doc include IB/srpt: docs: add a description for cq_size member locking/refcount: move kernel-doc markups to the proper place docs: lockdep-design: fix some warning issues MAINTAINERS: fix broken doc refs due to yaml conversion ice: docs fix a devlink info that broke a table crypto: sun8x-ce*: update entries to its documentation net: phy: remove kernel-doc duplication mm: pagemap.h: fix two kernel-doc markups blk-mq: docs: add kernel-doc description for a new struct member docs: userspace-api: add iommu.rst to the index file docs: hwmon: mp2975.rst: address some html build warnings docs: net: statistics.rst: remove a duplicated kernel-doc docs: kasan.rst: add two missing blank lines ... |
||
|
Julia Lawall
|
23d18dcfc5 |
Documentation: PM: cpuidle: correct path name
cpu/ is needed before cpu<N>/ Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Julia Lawall
|
6841ca15fe |
Documentation: PM: cpuidle: correct typo
cerainly -> certainly Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mauro Carvalho Chehab
|
50865d041e |
docs: abi-testing.rst: enable --rst-sources when building docs
Now that ABI/testing documents were fixed, add --rst-sources to the ABI/testing too. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9242473fd3df785565bb6084b1b814cc15074fb2.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
7832dea738 |
docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
With just a single fix, the contents there can be parsed properly without the need to escape any ReST incompatible stuff. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/472f4574b6aa2ff4de5a819db1a4a5c9a34f5168.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
c12759ff2d |
docs: ABI: create a 2-depth index for ABI
That helps to identify what ABI files are adding titles. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e267b36ae7f32bab2a86f1da6b40bb3e62c877d4.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
642514df1b |
docs: ABI: make it parse ABI/stable as ReST-compatible files
Now that the stable ABI files are compatible with ReST, parse them without converting complex descriptions as literal blocks nor escaping special characters. Please notice that escaping special characters will probably be needed at descriptions, at least for the asterisk character. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/59ccbaa75ff05f23e701dd9a0bbe118e9343a553.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
a7ee04b3ef |
docs: add ABI documentation to the admin-guide book
As we don't want a generic Sphinx extension to execute commands, change the one proposed to Markus to call the abi_book.pl script. Use a script to parse the Documentation/ABI directory and output it at the admin-guide. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5651482b06500e69a1acdf92152f90a203e6521d.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mauro Carvalho Chehab
|
afc74ce7b4 |
docs: SafeSetID: fix a warning
As reported by Sphinx 2.4.4: docs/Documentation/admin-guide/LSM/SafeSetID.rst:110: WARNING: Title underline too short. Note on GID policies and setgroups() ================== Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4afa281c170daabd1ce522653d5d5d5078ebd92c.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Mauro Carvalho Chehab
|
2644ccef6f |
docs: admin-guide: net.rst: add a missing blank line
There's a missing blank line after a literal block, which causes this warning: Documentation/admin-guide/sysctl/net.rst:303: WARNING: Literal block ends without a blank line; unexpected unindent. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/b2545be4a4c71269d10278b5990c3e06c4b65f84.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Linus Torvalds
|
bd6aabc7ca |
xen: branch for v5.10-rc1c
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX5VVeQAKCRCAXGG7T9hj voI0AQD3ol/EN9uHW1qKduBI/nl5tgv325Zri8CMu60kS45pgAD/ccUXRcHojs3l YIfgcgT4qKQFWzv57Fc9FUBQJMahJgM= =6ZgH -----END PGP SIGNATURE----- Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants |
||
|
Linus Torvalds
|
81ecf91eab |
SafeSetID changes for v5.10
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEgvWslnM+qUy+sgVg5n2WYw6TPBAFAl+Ifu8ACgkQ5n2WYw6T PBCoxA/+Pn0XvwYa6V773lPNjon+Oa94Aq7Wl6YryDMJakiGDJFSJa0tEI8TmRkJ z21kjww2Us9gEvfmNoc0t4oDJ98UNAXERjc98fOZgxH1d1urpGUI7qdQ07YCo0xZ CDOvqXk/PobGF6p9BpF5QWqEJNq6G8xAKpA8nLa6OUPcjofHroWCgIs86Rl3CtTc DwjcOvCgUoTxFm9Vpvm04njFFkVuGUwmXuhyV3Xjh2vNhHvfpP/ibTPmmv1sx4dO 9WE8BjW0HL5VMzms/BE/mnXmbu2BdPs+PW9/RjQfebbAH8DM3Noqr9f3Db8eqp7t TiqU8AO06TEVZa011+V3aywgz9rnH+XJ17TfutB28Z7lG3s4XPZYDgzubJxb1X8M 4d2mCL3N/ao5otx6FqpgJ2oK0ZceB/voY9qyyfErEBhRumxifl7AQCHxt3LumH6m fvvNY+UcN/n7hZPJ7sgZVi/hnnwvO0e1eX0L9ZdNsDjR1bgzBQCdkY53XNxam+rM z7tmT3jlDpNtPzOzFCZeiJuTgWYMDdJFqekPLess/Vqaswzc4PPT2lyQ6N81NR5H +mzYf/PNIg5fqN8QlMQEkMTv2fnC19dHJT83NPgy4dQObpXzUqYGWAmdKcBxLpnG du8wDpPHusChRFMZKRMTXztdMvMAuNqY+KJ6bFojG0Z+qgR7oQk= =/anB -----END PGP SIGNATURE----- Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linux Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs |
||
|
Linus Torvalds
|
c80e42a496 |
A handful of late-arriving documentation fixes.
-----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+TK60PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YrTMIAJSEchjBnlWOzvW/YmdhWz8+O3+CDPNIiJ2J 01tybiOBj64n0zMP7K6bN8IEjyRIed6L3vBsJxyIOGajkjekJZSqpBT9THy+AJnW ie72nA7DNYucdik8CWCKjyzylunVGfD/ju5uI4o4yBMTvliDlz9ZWIepF1fprfCb rTTyj5o+lsP11EjSSPw7RQIAHYCzFhBRanHqijGQnuEmnNKo+HxULcMwIsAtPjL8 wAgZyi6sr2kllk5ZsGaU8eSwiM4SCcuvOo9W36Eg0bKQnutUClGbAVL0UKy9yFd+ jJXTNDHGs/tBewSVyAmNa90WUORvRASdugI0hz1DdPt4qFIDdTQ= =+uur -----END PGP SIGNATURE----- Merge tag 'docs-5.10-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.10-2' of git://git.lwn.net/linux: docs: Add two missing entries in vm sysctl index docs/vm: trivial fixes to several spelling mistakes docs: submitting-patches: describe preserving review/test tags Documentation: Chinese translation of Documentation/arm64/hugetlbpage.rst Documentation: x86: fix a missing word in x86_64/mm.rst. docs: driver-api: remove a duplicated index entry docs: lkdtm: Modernize and improve details docs: deprecated.rst: Expand str*cpy() replacement notes docs/cpu-load: format the example code. |
||
|
Juergen Gross
|
1a89c1dc95 |
Documentation: add xen.fifo_events kernel parameter description
The kernel boot parameter xen.fifo_events isn't listed in Documentation/admin-guide/kernel-parameters.txt. Add it. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-6-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
|
Fam Zheng
|
62af696471 |
docs: Add two missing entries in vm sysctl index
Both seem overlooked while adding the section in the main content. Signed-off-by: Fam Zheng <famzheng@amazon.com> Link: https://lore.kernel.org/r/20201022065403.3936070-1-fam@euphon.net Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Linus Torvalds
|
24717cfbbb |
The one new feature this time, from Anna Schumaker, is READ_PLUS, which
has the same arguments as READ but allows the server to return an array of data and hole extents. Otherwise it's a lot of cleanup and bugfixes. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEYtFWavXG9hZotryuJ5vNeUKO4b4FAl+Q5vsVHGJmaWVsZHNA ZmllbGRzZXMub3JnAAoJECebzXlCjuG+DUAP/RlALnXbaoWi8YCcEcc9U1LoQKbD CJpDR+FqCOyGwRuzWung/5pvkOO50fGEeAroos+2rF/NgRkQq8EFr9AuBhNOYUFE IZhWEOfu/r2ukXyBmcu21HGcWLwPnyJehvjuzTQW2wOHlBi/sdoL5Ap1sVlwVLj5 EZ5kqJLD+ioG2sufW99Spi55l1Cy+3Y0IhLSWl4ZAE6s8hmFSYAJZFsOeI0Afx57 USPTDRaeqjyEULkb+f8IhD0eRApOUo4evDn9dwQx+of7HPa1CiygctTKYwA3hnlc gXp2KpVA1REaiYVgOPwYlnqBmJ2K9X0wCRzcWy2razqEcVAX/2j7QCe9M2mn4DC8 xZ2q4SxgXu9yf0qfUSVnDxWmP6ipqq7OmsG0JXTFseGKBdpjJY1qHhyqanVAGvEg I+xHnnWfGwNCftwyA3mt3RfSFPsbLlSBIMZxvN4kn8aVlqszGITOQvTdQcLYA6kT xWllBf4XKVXMqF0PzerxPDmfzBfhx6b1VPWOIVcu7VLBg3IXoEB2G5xG8MUJiSch OUTCt41LUQkerQlnzaZYqwmFdSBfXJefmcE/x/vps4VtQ/fPHX1jQyD7iTu3HfSP bRlkKHvNVeTodlBDe/HTPiTA99MShhBJyvtV5wfzIqwjc1cNreed+ePppxn8mxJi SmQ2uZk/MpUl7/V0 =rcOj -----END PGP SIGNATURE----- Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux Pull nfsd updates from Bruce Fields: "The one new feature this time, from Anna Schumaker, is READ_PLUS, which has the same arguments as READ but allows the server to return an array of data and hole extents. Otherwise it's a lot of cleanup and bugfixes" * tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits) NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy SUNRPC: fix copying of multiple pages in gss_read_proxy_verf() sunrpc: raise kernel RPC channel buffer size svcrdma: fix bounce buffers for unaligned offsets and multiple pages nfsd: remove unneeded break net/sunrpc: Fix return value for sysctl sunrpc.transports NFSD: Encode a full READ_PLUS reply NFSD: Return both a hole and a data segment NFSD: Add READ_PLUS hole segment encoding NFSD: Add READ_PLUS data support NFSD: Hoist status code encoding into XDR encoder functions NFSD: Map nfserr_wrongsec outside of nfsd_dispatch NFSD: Remove the RETURN_STATUS() macro NFSD: Call NFSv2 encoders on error returns NFSD: Fix .pc_release method for NFSv2 NFSD: Remove vestigial typedefs NFSD: Refactor nfsd_dispatch() error paths NFSD: Clean up nfsd_dispatch() variables NFSD: Clean up stale comments in nfsd_dispatch() NFSD: Clean up switch statement in nfsd_dispatch() ... |
||
|
Hui Su
|
bb7a2c6362 |
docs/cpu-load: format the example code.
format the example code. Signed-off-by: Hui Su <sh_def@163.com> Link: https://lore.kernel.org/r/20201018170557.GA7670@rlk Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Linus Torvalds
|
4a5bb973fa |
xen: branch for v5.10-rc1b
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX47RxAAKCRCAXGG7T9hj vj7WAP94Cj5cQXPGaTD9GAVLVLgF6L2wPxUT1/gqLMulfRgHdAEAqVidg8fLhI6G vgQiDwYp/svqZco2qA5i4YN+Xnr6Vg0= =V/7G -----END PGP SIGNATURE----- Merge tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - A single patch to fix the Xen security issue XSA-331 (malicious guests can DoS dom0 by triggering NULL-pointer dereferences or access to stale data). - A larger series to fix the Xen security issue XSA-332 (malicious guests can DoS dom0 by sending events at high frequency leading to dom0's vcpus being busy in IRQ handling for elongated times). * tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: block rogue events for some time xen/events: defer eoi in case of excessive number of events xen/events: use a common cpu hotplug hook for event channels xen/events: switch user event channels to lateeoi model xen/pciback: use lateeoi irq binding xen/pvcallsback: use lateeoi irq binding xen/scsiback: use lateeoi irq binding xen/netback: use lateeoi irq binding xen/blkback: use lateeoi irq binding xen/events: add a new "late EOI" evtchn framework xen/events: fix race in evtchn_fifo_unmask() xen/events: add a proper barrier to 2-level uevent unmasking xen/events: avoid removing an event channel while handling it |
||
|
Juergen Gross
|
e99502f762 |
xen/events: defer eoi in case of excessive number of events
In case rogue guests are sending events at high frequency it might happen that xen_evtchn_do_upcall() won't stop processing events in dom0. As this is done in irq handling a crash might be the result. In order to avoid that, delay further inter-domain events after some time in xen_evtchn_do_upcall() by forcing eoi processing into a worker on the same cpu, thus inhibiting new events coming in. The time after which eoi processing is to be delayed is configurable via a new module parameter "event_loop_timeout" which specifies the maximum event loop time in jiffies (default: 2, the value was chosen after some tests showing that a value of 2 was the lowest with an only slight drop of dom0 network throughput while multiple guests performed an event storm). How long eoi processing will be delayed can be specified via another parameter "event_eoi_delay" (again in jiffies, default 10, again the value was chosen after testing with different delay values). This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Wei Liu <wl@xen.org> |
||
|
Linus Torvalds
|
bbe85027ce |
Recalling the first round of new code for 5.10, in which we added:
- New feature: Widen inode timestamps and quota grace expiration
timestamps to support dates through the year 2486.
- New feature: storing inode btree counts in the AGI to speed up certain
mount time per-AG block reservation operatoins and add a little more
metadata redundancy.
For the second round of new code for 5.10:
- Deprecate the V4 filesystem format, some disused mount options, and some
legacy sysctl knobs now that we can support dates into the 25th century.
Note that removal of V4 support will not happen until the early 2030s.
- Fix some probles with inode realtime flag propagation.
- Fix some buffer handling issues when growing a rt filesystem.
- Fix a problem where a BMAP_REMAP unmap call would free rt extents even
though the purpose of BMAP_REMAP is to avoid freeing the blocks.
- Strengthen the dabtree online scrubber to check hash values on child
dabtree blocks.
- Actually log new intent items created as part of recovering log intent
items.
- Fix a bug where quotas weren't attached to an inode undergoing bmap
intent item recovery.
- Fix a buffer overrun problem with specially crafted log buffer
headers.
- Various cleanups to type usage and slightly inaccurate comments.
- More cleanups to the xattr, log, and quota code.
- Don't run the (slower) shared-rmap operations on attr fork mappings.
- Fix a bug where we failed to check the LSN of finobt blocks during
replay and could therefore overwrite newer data with older data.
- Clean up the ugly nested transaction mess that log recovery uses to
stage intent item recovery in the correct order by creating a proper
data structure to capture recovered chains.
- Use the capture structure to resume intent item chains with the
same log space and block reservations as when they were captured.
- Fix a UAF bug in bmap intent item recovery where we failed to maintain
our reference to the incore inode if the bmap operation needed to
relog itself to continue.
- Rearrange the defer ops mechanism to finish newly created subtasks
of a parent task before moving on to the next parent task.
- Automatically relog intent items in deferred ops chains if doing so
would help us avoid pinning the log tail. This will help fix some
log scaling problems now and will facilitate atomic file updates later.
- Fix a deadlock in the GETFSMAP implementation by using an internal
memory buffer to reduce indirect calls and copies to userspace,
thereby improving its performance by ~20%.
- Fix various problems when calling growfs on a realtime volume would
not fully update the filesystem metadata.
- Fix broken Kconfig asking about deprecated XFS when XFS is disabled.
-----BEGIN PGP SIGNATURE-----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=LuWg
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.10-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"The second large pile of new stuff for 5.10, with changes even more
monumental than last week!
We are formally announcing the deprecation of the V4 filesystem format
in 2030. All users must upgrade to the V5 format, which contains
design improvements that greatly strengthen metadata validation,
supports reflink and online fsck, and is the intended vehicle for
handling timestamps past 2038. We're also deprecating the old Irix
behavioral tweaks in September 2025.
Coming along for the ride are two design changes to the deferred
metadata ops subsystem. One of the improvements is to retain correct
logical ordering of tasks and subtasks, which is a more logical design
for upper layers of XFS and will become necessary when we add atomic
file range swaps and commits. The second improvement to deferred ops
improves the scalability of the log by helping the log tail to move
forward during long-running operations. This reduces log contention
when there are a large number of threads trying to run transactions.
In addition to that, this fixes numerous small bugs in log recovery;
refactors logical intent log item recovery to remove the last
remaining place in XFS where we could have nested transactions; fixes
a couple of ways that intent log item recovery could fail in ways that
wouldn't have happened in the regular commit paths; fixes a deadlock
vector in the GETFSMAP implementation (which improves its performance
by 20%); and fixes serious bugs in the realtime growfs, fallocate, and
bitmap handling code.
Summary:
- Deprecate the V4 filesystem format, some disused mount options, and
some legacy sysctl knobs now that we can support dates into the
25th century. Note that removal of V4 support will not happen until
the early 2030s.
- Fix some probles with inode realtime flag propagation.
- Fix some buffer handling issues when growing a rt filesystem.
- Fix a problem where a BMAP_REMAP unmap call would free rt extents
even though the purpose of BMAP_REMAP is to avoid freeing the
blocks.
- Strengthen the dabtree online scrubber to check hash values on
child dabtree blocks.
- Actually log new intent items created as part of recovering log
intent items.
- Fix a bug where quotas weren't attached to an inode undergoing bmap
intent item recovery.
- Fix a buffer overrun problem with specially crafted log buffer
headers.
- Various cleanups to type usage and slightly inaccurate comments.
- More cleanups to the xattr, log, and quota code.
- Don't run the (slower) shared-rmap operations on attr fork
mappings.
- Fix a bug where we failed to check the LSN of finobt blocks during
replay and could therefore overwrite newer data with older data.
- Clean up the ugly nested transaction mess that log recovery uses to
stage intent item recovery in the correct order by creating a
proper data structure to capture recovered chains.
- Use the capture structure to resume intent item chains with the
same log space and block reservations as when they were captured.
- Fix a UAF bug in bmap intent item recovery where we failed to
maintain our reference to the incore inode if the bmap operation
needed to relog itself to continue.
- Rearrange the defer ops mechanism to finish newly created subtasks
of a parent task before moving on to the next parent task.
- Automatically relog intent items in deferred ops chains if doing so
would help us avoid pinning the log tail. This will help fix some
log scaling problems now and will facilitate atomic file updates
later.
- Fix a deadlock in the GETFSMAP implementation by using an internal
memory buffer to reduce indirect calls and copies to userspace,
thereby improving its performance by ~20%.
- Fix various problems when calling growfs on a realtime volume would
not fully update the filesystem metadata.
- Fix broken Kconfig asking about deprecated XFS when XFS is
disabled"
* tag 'xfs-5.10-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: fix Kconfig asking about XFS_SUPPORT_V4 when XFS_FS=n
xfs: fix high key handling in the rt allocator's query_range function
xfs: annotate grabbing the realtime bitmap/summary locks in growfs
xfs: make xfs_growfs_rt update secondary superblocks
xfs: fix realtime bitmap/summary file truncation when growing rt volume
xfs: fix the indent in xfs_trans_mod_dquot
xfs: do the ASSERT for the arguments O_{u,g,p}dqpp
xfs: fix deadlock and streamline xfs_getfsmap performance
xfs: limit entries returned when counting fsmap records
xfs: only relog deferred intent items if free space in the log gets low
xfs: expose the log push threshold
xfs: periodically relog deferred intent items
xfs: change the order in which child and parent defer ops are finished
xfs: fix an incore inode UAF in xfs_bui_recover
xfs: clean up xfs_bui_item_recover iget/trans_alloc/ilock ordering
xfs: clean up bmap intent item recovery checking
xfs: xfs_defer_capture should absorb remaining transaction reservation
xfs: xfs_defer_capture should absorb remaining block reservations
xfs: proper replay of deferred ops queued during log recovery
xfs: remove XFS_LI_RECOVERED
...
|
||
|
Linus Torvalds
|
41eea65e2a |
Merge tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar: - Debugging for smp_call_function() - RT raw/non-raw lock ordering fixes - Strict grace periods for KASAN - New smp_call_function() torture test - Torture-test updates - Documentation updates - Miscellaneous fixes [ This doesn't actually pull the tag - I've dropped the last merge from the RCU branch due to questions about the series. - Linus ] * tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) smp: Make symbol 'csd_bug_count' static kernel/smp: Provide CSD lock timeout diagnostics smp: Add source and destination CPUs to __call_single_data rcu: Shrink each possible cpu krcp rcu/segcblist: Prevent useless GP start if no CBs to accelerate torture: Add gdb support rcutorture: Allow pointer leaks to test diagnostic code rcutorture: Hoist OOM registry up one level refperf: Avoid null pointer dereference when buf fails to allocate rcutorture: Properly synchronize with OOM notifier rcutorture: Properly set rcu_fwds for OOM handling torture: Add kvm.sh --help and update help message rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05 torture: Update initrd documentation rcutorture: Replace HTTP links with HTTPS ones locktorture: Make function torture_percpu_rwsem_init() static torture: document --allcpus argument added to the kvm.sh script rcutorture: Output number of elapsed grace periods rcutorture: Remove KCSAN stubs rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp() ... |
||
|
Linus Torvalds
|
54a4c789ca |
docs updates for v5.10-rc1
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl+JNGYACgkQCF8+vY7k
4RV/TA//ZoRoMQE5B6zwO4kOGILMbmW2uepjoEysLgus2ctkTUoRkpNLWS3SozcU
6c/eW1rC4Fji24te6lwusciZa5zQgbGMjFYk1LhnJ65lJA+kQ+kV1DGz/ZWtklMM
gLX20+tQADqGl+u2dmFCvmRhPWJ9nzt1C0auN7dGeu+9g97GnhKG6o2Kv/nVCb68
qMmAs9UrfN24DO5G1ixkdY08nSNJPrpgQnIR2ruUysUII/yTTtcnmHDbH3WWL6+9
2P87AZ6zsa3FdBhAjmG5YJklQgPkLFWEykHMTqq/Mkcpff/JB/AayrL6XNB2QoZb
YXLHJp3Na6iBmdmHhecg+VQDgz28UfMk+p+HFoJh8RTtJa9/qJvYdJmIE/mUPrnY
gL4jNgMVwkptGHXh7IRuSLysT5heJPMQss6TfZ6yYadeOIpx7W8MCAYnGffiElLQ
hmKdmyCszS3SERJz40EOBdr2NQYcDEUt2NtEhdVfium21A4PFOdJlCejifGhJyzP
n1QcyMXHnh/d4zecA6fcD0LVyxBgngeKEvdtOLZJ1ubxWwHhgWTN8R4HedoN2Nb9
cLEUK8Td+9n2RVS8UED4BBI+6vfN3Y6Syjvy8qD3pCs4SBcu3k790mf47t2QhkEq
+Ho06gdrGJdEcSDO8zVY7qjZX/GX/dbRHCb5CRokL5FmNWhXd/Y=
=26wi
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
|
||
|
Linus Torvalds
|
c4cf498dc0 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ... |
||
|
Albert van der Linde
|
2c739ced58 |
lib, include/linux: add usercopy failure capability
Patch series "add fault injection to user memory access", v3. The goal of this series is to improve testing of fault-tolerance in usages of user memory access functions, by adding support for fault injection. syzkaller/syzbot are using the existing fault injection modes and will use this particular feature also. The first patch adds failure injection capability for usercopy functions. The second changes usercopy functions to use this new failure capability (copy_from_user, ...). The third patch adds get/put/clear_user failures to x86. This patch (of 3): Add a failure injection capability to improve testing of fault-tolerance in usages of user memory access functions. Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy functions. The should_fail_usercopy function is to be called by these functions (copy_from_user, get_user, ...) in order to fail or not. Signed-off-by: Albert van der Linde <alinde@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200831171733.955393-1-alinde@google.com Link: http://lkml.kernel.org/r/20200831171733.955393-2-alinde@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
9ff9b0d392 |
networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. Allow more than 255 IPv4 multicast interfaces. Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. Allow more calls to same peer in RxRPC. Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. Add TC actions for implementing MPLS L2 VPNs. Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. Support sleepable BPF programs, initially targeting LSM and tracing. Add bpf_d_path() helper for returning full path for given 'struct path'. Make bpf_tail_call compatible with bpf-to-bpf calls. Allow BPF programs to call map_update_elem on sockmaps. Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). Support listing and getting information about bpf_links via the bpf syscall. Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. Add XDP support for Intel's igb driver. Support offloading TC flower classification and filtering rules to mscc_ocelot switches. Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc= =bc1U -----END PGP SIGNATURE----- Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ... |
||
|
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
||
|
Mauro Carvalho Chehab
|
b30fd8e962 |
docs: pstore-blk.rst: fix kernel-doc tags
There is currently a problem with kernel-doc tags from blk.c: .../Documentation/admin-guide/pstore-blk:239: ./fs/pstore/blk.c:175: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'. Declaration is 'register_pstore_device'. .../Documentation/admin-guide/pstore-blk:239: ./fs/pstore/blk.c:432: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'. Declaration is 'register_pstore_blk'. .../Documentation/admin-guide/pstore-blk:242: ./include/linux/pstore_blk.h:43: WARNING: Duplicate C declaration, also defined in 'admin-guide/pstore-blk'. Declaration is 'pstore_device_info'. Basically, the internal parts is shown with :export:, instead of :internal:. Yet, there are some other exported docs that aren't at the document, because they lack :identifiers:. So, instead, let's just use :export: at the kAPI part of the documentation. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Mauro Carvalho Chehab
|
abc59fd4a5 |
docs: remove some replace macros like |struct foo|
There are three files with replace macros for structs, mapping them into Sphinx 2.x C domain references. Well, this is broken on Sphinx 3.x. Also, for Sphinx 2.x, the automarkup macro should be able to take care of them. So, let's just drop those. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Linus Torvalds
|
5d6c413c92 |
TTY/Serial patches for 5.10-rc1
Here is the big set of tty and serial driver patches for 5.10-rc1. Lots of little things in here, including: - tasklet_setup api conversions - sysrq support for capital letters - vt and vc cleanups and unwinding the mess some more - serial driver updates and minor tweaks - new device ids - rs485 support for some drivers - serial binding documentation updates - lots of small serial driver changes for reported issues All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c5vA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykVRACfWQRqsz/IIs6MZsDY9dkj4+QVUWAAn0mN2uHR mBox8w4TdTfG96jFXSfF =WYKP -----END PGP SIGNATURE----- Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.10-rc1. Lots of little things in here, including: - tasklet_setup api conversions - sysrq support for capital letters - vt and vc cleanups and unwinding the mess some more - serial driver updates and minor tweaks - new device ids - rs485 support for some drivers - serial binding documentation updates - lots of small serial driver changes for reported issues All have been in linux-next for a while with no reported issues" * tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) serial: mcf: add sysrq capability serial: fsl_lpuart: add sysrq support when using dma fbcon: remove no-op fbcon_set_origin() tty/sysrq: Extend the sysrq_key_table to cover capital letters serial: max310x: rework RX interrupt handling serial: 8250_dw: Fix clk-notifier/port suspend deadlock serial: 8250: Skip uninitialized TTY port baud rate update serial: 8250: Discard RTS/DTS setting from clock update method tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm serial: 8250_fsl: Fix TX interrupt handling condition serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt tty: serial: fsl_lpuart: fix lpuart32_poll_get_char tty: serial: lpuart: fix lpuart32_write usage serial: qcom_geni_serial: To correct QUP Version detection logic serial: mvebu-uart: fix unused variable warning vt_ioctl: make VT_RESIZEX behave like VT_RESIZE serial: mvebu-uart: simplify the return expression of mvebu_uart_probe() tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n pch_uart: drop double zeroing ... |
||
|
Linus Torvalds
|
defb53a7c7 |
PNP updates for 5.10-rc1
- Remove the now unused pnp_find_card() function (Christoph Hellwig).
- Drop duplicate pci.h include from the quirks code and add an
"internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
Tao).
-----BEGIN PGP SIGNATURE-----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=8YBU
-----END PGP SIGNATURE-----
Merge tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP updates from Rafael Wysocki:
"These clean the PNP code somewhat:
- Remove the now unused pnp_find_card() function (Christoph Hellwig)
- Drop duplicate pci.h include from the quirks code and add an
"internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
Tao)"
* tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: remove the now unused pnp_find_card() function
PNP: ACPI: Fix missing-prototypes in acpi_pnp.c
PNP: quirks: Fix duplicate included pci.h
|
||
|
Linus Torvalds
|
cf1d2b44f6 |
ACPI updates for 5.10-rc1
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
||
|
Linus Torvalds
|
0b8417c141 |
Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
||
|
Linus Torvalds
|
d5660df4a5 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ... |
||
|
Baoquan He
|
540809be52 |
doc/vm: fix typo in the hugetlb admin documentation
Change 'pecify' to 'Specify'. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lkml.kernel.org/r/20200723032248.24772-4-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Muchun Song
|
5f9a4f4a70 |
mm: memcontrol: add the missing numa_stat interface for cgroup v2
In the cgroup v1, we have a numa_stat interface. This is useful for providing visibility into the numa locality information within an memcg since the pages are allowed to be allocated from any physical node. One of the use cases is evaluating application performance by combining this information with the application's CPU allocation. But the cgroup v2 does not. So this patch adds the missing information. Suggested-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Zefan Li <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |