[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]
When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols. This is a common
issue on both x86 and Arm64 platforms.
Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:
...
Disassembly of section .bss:
0000000000004040 <completed.0>:
...
0000000000004080 <buf1>:
...
00000000000040c0 <buf2>:
...
0000000000004100 <thread>:
...
First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.
# ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf2 0x30a8-0x30e8
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf1 0x3068-0x30a8
...
The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section. The perf tool uses below formula to convert
a symbol's memory address to a file address:
file_address = st_value - sh_addr + sh_offset
^
` Memory address
We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.
The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.
Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info. A better choice for converting
memory address to file address is using the formula:
file_address = st_value - p_vaddr + p_offset
This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.
After applying the change:
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf2 0x30c0-0x3100
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf1 0x3080-0x30c0
...
Fixes: f17e04afaf ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a159128faff151b7fe5f4eb0f310b1e0a2d56bf ]
We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].
Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.
[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42
CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0xbb/0x6ac
? _printk+0xad/0xde
? refill_work+0x43/0xd4
kasan_report+0xa8/0x130
? refill_work+0x43/0xd4
refill_work+0x43/0xd4
process_one_work+0x43d/0x780
worker_thread+0x2a0/0x6f0
? process_one_work+0x780/0x780
kthread+0x167/0x1a0
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
...
Fixes: b2baed69e6 ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99a63d36cb3ed5ca3aa6fcb64cffbeaf3b0fb164 ]
Domingo Dirutigliano and Nicola Guerrera report kernel panic when
sending nf_queue verdict with 1-byte nfta_payload attribute.
The IP/IPv6 stack pulls the IP(v6) header from the packet after the
input hook.
If user truncates the packet below the header size, this skb_pull() will
result in a malformed skb (skb->len < 0).
Fixes: 7af4cc3fa1 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink")
Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b89fc26f741d9f9efb51cba3e9b241cf1380ec5a ]
There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.
The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.
One of the call paths that could trigger bug is shown below:
(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep
This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ]
Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 870e3a634b6a6cb1543b359007aca73fe6a03ac5 ]
While reading sysctl_tcp_reflect_tos, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: ac8f1710c1 ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79f55473bfc8ac51bd6572929a679eeb4da22251 ]
While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 9c21d2fc41 ("tcp: add tcp_comp_sack_nr sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22396941a7f343d704738360f9ef0e6576489d43 ]
While reading sysctl_tcp_comp_sack_slack_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: a70437cc09 ("tcp: add hrtimer slack to sack compression")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4866b2b0f7672b6d760c4b8ece6fb56f965dcc8a ]
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 6d82aa2420 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b205fbbf3cffa374721bb7623f7aa8c46074f1 ]
init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.
We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c630d1fe6219769049c87d1a6a0e9a6de55328a1 ]
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.
This fixes several issues:
- the check in validate_add_rxsa doesn't work with 32-bit attributes
- the checks in validate_add_txsa and validate_upd_sa incorrectly
reject X << 32 (with X != 0)
Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b07a0e2044057f201d694ab474f5c42a02b6465b ]
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.
To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.
Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.
Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3240eac4ff20e51b87600dbd586ed814daf313db ]
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.
Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46040eeaf2e523a4096199fd93a11e794818009 ]
Commit 48ef50fa86 added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.
Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.
Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa709da0e032cee7c202047ecd75f437bb0126ed ]
Since commit 1033990ac5 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.
v1->v2:
- Improve the description as Marcelo suggested.
Fixes: 1033990ac5 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2afdbe7b8de84c28e219073a6661080e1b3ded48 ]
While reading sysctl_tcp_invalid_ratelimit, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 032ee42369 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85225e6f0a76e6745bc841c9f25169c509b573d8 ]
While reading sysctl_tcp_autocorking, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: f54b311142 ("tcp: auto corking")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1330ffacd05fc9ac4159d19286ce119e22450ed2 ]
While reading sysctl_tcp_min_rtt_wlen, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: f672258391 ("tcp: track min RTT using windowed min-filter")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0bb4ab9dfddd872622239f49fb2bd403b70853b ]
While reading sysctl_tcp_min_tso_segs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 95bd09eb27 ("tcp: TSO packets automatic sizing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ]
In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.
Fixes: 3c326fe9cb ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ebcc62c738f68688ee7c6fec2efe5bc6d3d7e60 ]
While reading sysctl_igmp_qrv, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.
qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
Fixes: a9fe8e2994 ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f6336724a4d4220c89a4ec38bca84b03b178b1a3 upstream.
tls_device_down takes a reference on all contexts it's going to move to
the degraded state (software fallback). If sk_destruct runs afterwards,
it can reduce the reference counter back to 1 and return early without
destroying the context. Then tls_device_down will release the reference
it took and call tls_device_free_ctx. However, the context will still
stay in tls_device_down_list forever. The list will contain an item,
memory for which is released, making a memory corruption possible.
Fix the above bug by properly removing the context from all lists before
any call to tls_device_free_ctx.
Fixes: 3740651bf7e2 ("tls: Fix context leak on tls_device_down")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85f0173df35e5462d89947135a6a5599c6c3ef6f upstream.
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.
=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263
CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
dump_backtrace+0x1a8/0x230
show_stack+0x20/0x70
dump_stack_lvl+0x68/0x84
print_report+0xc4/0x120
kasan_report+0x84/0x120
__asan_load4+0x94/0xd0
find_match.part.0+0x70/0x134
__find_rr_leaf+0x408/0x470
fib6_table_lookup+0x264/0x540
ip6_pol_route+0xf4/0x260
ip6_pol_route_output+0x58/0x70
fib6_rule_lookup+0x1a8/0x330
ip6_route_output_flags_noref+0xd8/0x1a0
ip6_route_output_flags+0x58/0x160
ip6_dst_lookup_tail+0x5b4/0x85c
ip6_dst_lookup_flow+0x98/0x120
rawv6_sendmsg+0x49c/0xc70
inet_sendmsg+0x68/0x94
Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.
cpu0 cpu1
fib6_table_lookup
__find_rr_leaf
addrconf_notify [ NETDEV_CHANGEMTU ]
addrconf_ifdown
RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown
So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.
Fixes: dcd1f57295 ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream.
When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy(). As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.
struct ipv6_sr_hdr *hdr;
char data[24] = {0};
int fd;
hdr = (struct ipv6_sr_hdr *)data;
hdr->hdrlen = 2;
hdr->type = IPV6_SRCRT_TYPE_4;
fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
close(fd);
To fix memory leaks, let's add a destroy function.
Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range. The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0). Thus, the local DoS does
not succeed until we change the default value. However, at least
Ubuntu/Fedora/RHEL loosen it.
$ cat /usr/lib/sysctl.d/50-default.conf
...
-net.ipv4.ping_group_range = 0 2147483647
Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.
setsockopt
IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
IPV6_HOPOPTS (inet6_sk(sk)->opt)
IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
IPV6_RTHDR (inet6_sk(sk)->opt)
IPV6_DSTOPTS (inet6_sk(sk)->opt)
IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)
getsockopt
IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)
For the record, I left a different splat with syzbot's one.
unreferenced object 0xffff888006270c60 (size 96):
comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
hex dump (first 32 bytes):
01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
[<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
[<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
[<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
[<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
[<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176
Fixes: 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db3815a2fa691da145cfbe834584f31ad75df9ff upstream.
While reading sysctl_tcp_challenge_ack_limit, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 282f23c6ee ("tcp: implement RFC 5961 3.2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fb90193fbd66b4c5409ef729fd081861f8b6351 upstream.
While reading sysctl_tcp_limit_output_bytes, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 46d3ceabd8 ("tcp: TCP Small Queues")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 780476488844e070580bfc9e3bc7832ec1cea883 upstream.
While reading sysctl_tcp_moderate_rcvbuf, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d8f24eeedc58d5f87b650ddda73c16e8ba56559 upstream.
This reverts commit 4a41f453be.
This to-be-reverted commit was meant to apply a stricter rule for the
stack to enter pingpong mode. However, the condition used to check for
interactive session "before(tp->lsndtime, icsk->icsk_ack.lrcvtime)" is
jiffy based and might be too coarse, which delays the stack entering
pingpong mode.
We revert this patch so that we no longer use the above condition to
determine interactive session, and also reduce pingpong threshold to 1.
Fixes: 4a41f453be ("tcp: change pingpong threshold to 3")
Reported-by: LemmyHuang <hlm3280@163.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220721204404.388396-1-weiwan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.
Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa49761309 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream.
Currently loopback test is failiing due to the error returned from
ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI.
Fixes: 0e674aeb0b ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream.
Tx side sets EOP and RS bits on descriptors to indicate that a
particular descriptor is the last one and needs to generate an irq when
it was sent. These bits should not be checked on completion path
regardless whether it's the Tx or the Rx. DD bit serves this purpose and
it indicates that a particular descriptor is either for Rx or was
successfully Txed. EOF is also set as loopback test does not xmit
fragmented frames.
Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead
of EOP and RS pair.
Fixes: 0e674aeb0b ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab1ba21b523ab496b1a4a8e396333b24b0a18f9a upstream.
While reading sysctl_tcp_no_ssthresh_metrics_save, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 65e6d90168 ("net-tcp: Disable TCP ssthresh metrics cache by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8499a2454d9e8a55ce616ede9f9580f36fd5b0f3 upstream.
While reading sysctl_tcp_nometrics_save, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 706c6202a3589f290e1ef9be0584a8f4a3cc0507 upstream.
While reading sysctl_tcp_frto, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36eeee75ef0157e42fb6593dcc65daab289b559e upstream.
While reading sysctl_tcp_adv_win_scale, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02ca527ac5581cf56749db9fd03d854e842253dd upstream.
While reading sysctl_tcp_app_win, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58ebb1c8b35a8ef38cd6927431e0fa7b173a632d upstream.
While reading sysctl_tcp_dsack, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e64ab2dbd882933b65cd82ff6235d705ad65dbb6 upstream.
If a watch is being added to a queue, it needs to guard against
interference from addition of a new watch, manual removal of a watch and
removal of a watch due to some other queue being destroyed.
KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by
holding the key->sem writelocked and by holding refs on both the key and
the queue - but that doesn't prevent interaction from other {key,queue}
pairs.
While add_watch_to_object() does take the spinlock on the event queue,
it doesn't take the lock on the source's watch list. The assumption was
that the caller would prevent that (say by taking key->sem) - but that
doesn't prevent interference from the destruction of another queue.
Fix this by locking the watcher list in add_watch_to_object().
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: keyrings@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0339f036ef4beb9b20f0b6532a1e0ece7f594c6 upstream.
Since __post_watch_notification() walks wlist->watchers with only the
RCU read lock held, we need to use RCU methods to add to the list (we
already use RCU methods to remove from the list).
Fix add_watch_to_object() to use hlist_add_head_rcu() instead of
hlist_add_head() for that list.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66cee9097e2b74ff3c8cc040ce5717c521a0c3fa upstream.
Users may request that pages from an OpenCL SVM allocation be migrated
to the GPU with clEnqueueSVMMigrateMem(). In Nouveau this will call into
nouveau_dmem_migrate_vma() to do the migration. If the total range to be
migrated exceeds SG_MAX_SINGLE_ALLOC the pages will be migrated in
chunks of size SG_MAX_SINGLE_ALLOC. However a typo in updating the
starting address means that only the first chunk will get migrated.
Fix the calculation so that the entire range will get migrated if
possible.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Fixes: e3d8b08904 ("drm/nouveau/svm: map pages after migration")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720062745.960701-1-apopple@nvidia.com
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 918e75f77af7d2e049bb70469ec0a2c12782d96a upstream.
This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never
called in any interrupt context. This is done by adding an
additional condition in_task().
Justification:
There are some constrains to satisfy for the invocation of the
arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG
instruction is relatively heavy weight and may for example
make some network loads cause to timeout and buck.
However, it was not clear what kind of interrupt context is exactly
encountered during kernel init or network traffic eventually calling
arch_get_random_seed_long().
After some days of investigations it is clear that the s390
start_kernel function is not running in any interrupt context and
so the trng is called:
Jul 11 18:33:39 t35lp54 kernel: [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel: [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel: [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel: [<000000010590402a>] startup_continue+0x2a/0x40
The condition in_task() is true and the CPACF trng provides random data
during kernel startup.
The network traffic however, is more difficult. A typical call stack
looks like this:
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel: [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel: [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel: [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel: [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel: [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel: [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel: [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel: [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935b9e>] restart_int_handler+0x6e/0x90
which confirms that the call is in softirq context. So in_task() covers exactly
the cases where we want to have CPACF trng called: not in nmi, not in hard irq,
not in soft irq but in normal task context and during kernel init.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com
Fixes: e4f74400308c ("s390/archrandom: simplify back to earlier design and initialize earlier")
[agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c80af0c250c8f8a3c978aa5aafbe9c39b336b813 upstream.
This reverts commit 912f655d78.
This commit introduced a regression that can cause mount hung. The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.
[13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds.
[13148.739691] Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2
[13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13148.745846] task:mount.ocfs2 state:D stack: 0 pid:53045 ppid: 53044 flags:0x00004000
[13148.749354] Call Trace:
[13148.750718] <TASK>
[13148.752019] ? usleep_range+0x90/0x89
[13148.753882] __schedule+0x210/0x567
[13148.755684] schedule+0x44/0xa8
[13148.757270] schedule_timeout+0x106/0x13c
[13148.759273] ? __prepare_to_swait+0x53/0x78
[13148.761218] __wait_for_common+0xae/0x163
[13148.763144] __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2]
[13148.765780] ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.768312] ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.770968] ocfs2_journal_init+0x91/0x340 [ocfs2]
[13148.773202] ocfs2_check_volume+0x39/0x461 [ocfs2]
[13148.775401] ? iput+0x69/0xba
[13148.777047] ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2]
[13148.779646] ocfs2_fill_super+0x54b/0x853 [ocfs2]
[13148.781756] mount_bdev+0x190/0x1b7
[13148.783443] ? ocfs2_remount+0x440/0x440 [ocfs2]
[13148.785634] legacy_get_tree+0x27/0x48
[13148.787466] vfs_get_tree+0x25/0xd0
[13148.789270] do_new_mount+0x18c/0x2d9
[13148.791046] __x64_sys_mount+0x10e/0x142
[13148.792911] do_syscall_64+0x3b/0x89
[13148.794667] entry_SYSCALL_64_after_hwframe+0x170/0x0
[13148.797051] RIP: 0033:0x7f2309f6e26e
[13148.798784] RSP: 002b:00007ffdcee7d408 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[13148.801974] RAX: ffffffffffffffda RBX: 00007ffdcee7d4a0 RCX: 00007f2309f6e26e
[13148.804815] RDX: 0000559aa762a8ae RSI: 0000559aa939d340 RDI: 0000559aa93a22b0
[13148.807719] RBP: 00007ffdcee7d5b0 R08: 0000559aa93a2290 R09: 00007f230a0b4820
[13148.810659] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcee7d420
[13148.813609] R13: 0000000000000000 R14: 0000559aa939f000 R15: 0000000000000000
[13148.816564] </TASK>
To fix it, we can just fix __ocfs2_find_empty_slot. But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.
Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com
Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.
This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
refcount_t: increment on 0; use-after-free.
BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705
CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W
4.14.234-00003-g1fb6d0bd49a4-dirty #28
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
Google Inc. MSM sm8150 Flame DVT (DT)
Workqueue: hci0 hci_rx_work
Call trace:
dump_backtrace+0x0/0x378
show_stack+0x20/0x2c
dump_stack+0x124/0x148
print_address_description+0x80/0x2e8
__kasan_report+0x168/0x188
kasan_report+0x10/0x18
__asan_load4+0x84/0x8c
refcount_dec_and_test+0x20/0xd0
l2cap_chan_put+0x48/0x12c
l2cap_recv_frame+0x4770/0x6550
l2cap_recv_acldata+0x44c/0x7a4
hci_acldata_packet+0x100/0x188
hci_rx_work+0x178/0x23c
process_one_work+0x35c/0x95c
worker_thread+0x4cc/0x960
kthread+0x1a8/0x1c4
ret_from_fork+0x10/0x18
Cc: stable@kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44e29e64cf1ac0cffb152e0532227ea6d002aa28 upstream.
Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.
It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)
Fixes: 353f7988dd84 ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36a15e1cb134c0395261ba1940762703f778438c upstream.
The extra byte inserted by usbnet.c when
(length % dev->maxpacket == 0) is causing problems to device.
This patch sets FLAG_SEND_ZLP to avoid this.
Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Problems observed:
======================================================================
1) Using ssh/sshfs. The remote sshd daemon can abort with the message:
"message authentication code incorrect"
This happens because the tcp message sent is corrupted during the
USB "Bulk out". The device calculate the tcp checksum and send a
valid tcp message to the remote sshd. Then the encryption detects
the error and aborts.
2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out
3) Stop normal work without any log message.
The "Bulk in" continue receiving packets normally.
The host sends "Bulk out" and the device responds with -ECONNRESET.
(The netusb.c code tx_complete ignore -ECONNRESET)
Under normal conditions these errors take days to happen and in
intense usage take hours.
A test with ping gives packet loss, showing that something is wrong:
ping -4 -s 462 {destination} # 462 = 512 - 42 - 8
Not all packets fail.
My guess is that the device tries to find another packet starting
at the extra byte and will fail or not depending on the next
bytes (old buffer content).
======================================================================
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a501ab75e7624d133a5a3c7ec010687c8b961d23 upstream.
There is a race in pty_write(). pty_write() can be called in parallel
with e.g. ioctl(TIOCSTI) or ioctl(TCXONC) which also inserts chars to
the buffer. Provided, tty_flip_buffer_push() in pty_write() is called
outside the lock, it can commit inconsistent tail. This can lead to out
of bounds writes and other issues. See the Link below.
To fix this, we have to introduce a new helper called
tty_insert_flip_string_and_push_buffer(). It does both
tty_insert_flip_string() and tty_flip_buffer_commit() under the port
lock. It also calls queue_work(), but outside the lock. See
71a174b39f (pty: do tty_flip_buffer_push without port->lock in
pty_write) for the reasons.
Keep the helper internal-only (in drivers' tty.h). It is not intended to
be used widely.
Link: https://seclists.org/oss-sec/2022/q2/155
Fixes: 71a174b39f (pty: do tty_flip_buffer_push without port->lock in pty_write)
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 716b10580283fda66f2b88140e3964f8a7f9da89 upstream.
We will need this new helper in the next patch.
Cc: Hillf Danton <hdanton@sina.com>
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5db96ef23bda6c2a61a51693c85b78b52d03f654 upstream.
Since commit a9c3f68f3c (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All
users were converted in the previous patches, so remove
tty_schedule_flip() completely while inlining its body into
tty_flip_buffer_push().
One less exported function.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>