forked from luck/tmp_suning_uos_patched
41662f5cc5
21750 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Kees Cook
|
41662f5cc5 |
sysctl: enable strict writes
SYSCTL_WRITES_WARN was added in commit
|
||
Xunlei Pang
|
978e30c9b4 |
kexec: move some memembers and definitions within the scope of CONFIG_KEXEC_FILE
Move the stuff currently only used by the kexec file code within CONFIG_KEXEC_FILE (and CONFIG_KEXEC_VERIFY_SIG). Also move internal "struct kexec_sha_region" and "struct kexec_buf" into "kexec_internal.h". Signed-off-by: Xunlei Pang <xlpang@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Geliang Tang
|
2b24692b92 |
kernel/kexec_core.c: use list_for_each_entry_safe in kimage_free_page_list
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Xunlei Pang
|
cdf4b3fa03 |
kexec: set KEXEC_TYPE_CRASH before sanity_check_segment_list()
sanity_check_segment_list() checks KEXEC_TYPE_CRASH flag to ensure all the segments of the loaded crash kernel are within the kernel crash resource limits, so set the flag beforehand. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
9425676a36 |
kernel/cpu.c: make set_cpu_* static inlines
Almost all callers of the set_cpu_* functions pass an explicit true or false. Making them static inline thus replaces the function calls with a simple set_bit/clear_bit, saving some .text. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
5aec01b834 |
kernel/cpu.c: eliminate cpu_*_mask
Replace the variables cpu_possible_mask, cpu_online_mask, cpu_present_mask and cpu_active_mask with macros expanding to expressions of the same type and value, eliminating some indirection. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
4b804c85dc |
kernel/cpu.c: export __cpu_*_mask
Exporting the cpumasks __cpu_possible_mask and friends will allow us to remove the extra indirection through the cpu_*_mask variables. It will also allow the set_cpu_* functions to become static inlines, which will give a .text reduction. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rasmus Villemoes
|
c4c54dd1ca |
kernel/cpu.c: change type of cpu_possible_bits and friends
Change cpu_possible_bits and friends (online, present, active) from being bitmaps that happen to have the right size to actually being struct cpumasks. Also rename them to __cpu_xyz_mask. This is mostly a small cleanup in preparation for exporting them and, eventually, eliminating the extra indirection through the cpu_xyz_mask variables. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dmitry Safonov
|
c428fbdbf3 |
exit: remove unneeded declaration of exit_mm()
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jann Horn
|
caaee6234d |
ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oleg Nesterov
|
570ac9337b |
ptrace: task_stopped_code(ptrace => true) can't see TASK_STOPPED task
task_stopped_code()->task_is_stopped_or_traced() doesn't look right, the traced task must never be TASK_STOPPED. We can not add WARN_ON(task_is_stopped(p)), but this is only because do_wait() can race with PTRACE_ATTACH from another thread. [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Roland McGrath <roland@hack.frob.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Pedro Alves <palves@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oleg Nesterov
|
7c3b00e06d |
ptrace: make wait_on_bit(JOBCTL_TRAPPING_BIT) in ptrace_attach() killable
ptrace_attach() can hang waiting for STOPPED -> TRACED transition if the tracee gets frozen in between, change wait_on_bit() to use TASK_KILLABLE. This doesn't really solve the problem(s) and we probably need to fix the freezer. In particular, note that this means that pm freezer will fail if it races attach-to-stopped-task. And otoh perhaps we can just remove JOBCTL_TRAPPING_BIT altogether, it is not clear if we really need to hide this transition from debugger, WNOHANG after PTRACE_ATTACH can fail anyway if it races with SIGCONT. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Roland McGrath <roland@hack.frob.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Pedro Alves <palves@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
5807fcaa9b |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: - EVM gains support for loading an x509 cert from the kernel (EVM_LOAD_X509), into the EVM trusted kernel keyring. - Smack implements 'file receive' process-based permission checking for sockets, rather than just depending on inode checks. - Misc enhancments for TPM & TPM2. - Cleanups and bugfixes for SELinux, Keys, and IMA. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits) selinux: Inode label revalidation performance fix KEYS: refcount bug fix ima: ima_write_policy() limit locking IMA: policy can be updated zero times selinux: rate-limit netlink message warnings in selinux_nlmsg_perm() selinux: export validatetrans decisions gfs2: Invalid security labels of inodes when they go invalid selinux: Revalidate invalid inode security labels security: Add hook to invalidate inode security labels selinux: Add accessor functions for inode->i_security security: Make inode argument of inode_getsecid non-const security: Make inode argument of inode_getsecurity non-const selinux: Remove unused variable in selinux_inode_init_security keys, trusted: seal with a TPM2 authorization policy keys, trusted: select hash algorithm for TPM2 chips keys, trusted: fix: *do not* allow duplicate key options tpm_ibmvtpm: properly handle interrupted packet receptions tpm_tis: Tighten IRQ auto-probing tpm_tis: Refactor the interrupt setup tpm_tis: Get rid of the duplicate IRQ probing code ... |
||
Linus Torvalds
|
2d663b5581 |
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore: "Seven audit patches for 4.5, all very minor despite the diffstat. The diffstat churn for linux/audit.h can be attributed to needing to reshuffle the linux/audit.h header to fix the seccomp auditing issue (see the commit description for details). Besides the seccomp/audit fix, most of the fixes are around trying to improve the connection with the audit daemon and a Kconfig simplification. Nothing crazy, and everything passes our little audit-testsuite" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: always enable syscall auditing when supported and audit is enabled audit: force seccomp event logging to honor the audit_enabled flag audit: Delete unnecessary checks before two function calls audit: wake up threads if queue switched from limited to unlimited audit: include auditd's threads in audit_log_start() wait exception audit: remove audit_backlog_wait_overflow audit: don't needlessly reset valid wait time |
||
Linus Torvalds
|
0cbeafb245 |
Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton: - more MM stuff: - Kirill's page-flags rework - Kirill's now-allegedly-fixed THP rework - MADV_FREE implementation - DAX feature work (msync/fsync). This isn't quite complete but DAX is new and it's good enough and the guys have a handle on what needs to be done - I expect this to be wrapped in the next week or two. - some vsprintf maintenance work - various other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (145 commits) printk: change recursion_bug type to bool lib/vsprintf: factor out %pN[F] handler as netdev_bits() lib/vsprintf: refactor duplicate code to special_hex_number() printk-formats.txt: remove unimplemented %pT printk: help pr_debug and pr_devel to optimize out arguments lib/test_printf.c: test dentry printing lib/test_printf.c: add test for large bitmaps lib/test_printf.c: account for kvasprintf tests lib/test_printf.c: add a few number() tests lib/test_printf.c: test precision quirks lib/test_printf.c: check for out-of-bound writes lib/test_printf.c: don't BUG lib/kasprintf.c: add sanity check to kvasprintf lib/vsprintf.c: warn about too large precisions and field widths lib/vsprintf.c: help gcc make number() smaller lib/vsprintf.c: expand field_width to 24 bits lib/vsprintf.c: eliminate potential race in string() lib/vsprintf.c: move string() below widen_string() lib/vsprintf.c: pull out padding code from dentry_name() printk: do cond_resched() between lines while outputting to consoles ... |
||
Linus Torvalds
|
a016af2e70 |
sound updates for 4.5-rc1
We've had quite busy weeks in this cycle. Looking at ALSA core, the significant changes are a few fixes wrt timer and sequencer ioctls that have been revealed by fuzzer recently. Other than that, ASoC core got a few updates about DAI link handling, but these are rather straightforward refactoring. In drivers scene, ASoC received quite lots of new drivers in addition to bunch of updates for still ongoing Intel Skylake support and topology API. HD-audio gained a new HDMI/DP hotplug notification via component. FireWire got a pile of code refactoring/updates with SCS.1x driver integration. More highlights are shown below. [NOTE: this contains also many commits for DRM. This is due to the pull of drm stable branch into sound tree, as the base of i915 audio component work for HD-audio. The highlights below don't contain these DRM changes, as these are supposed to be pulled via drm tree in anyway sooner or later.] Core - Handful fixes to harden ALSA timer and sequencer ioctls against races reported by syzkaller fuzzer - Irq description string can be unique to each card; only for HD-audio for now ASoC - Conversion of the array of DAI links to a list for supporting dynamically adding and removing DAI links - Topology API enhancements to make everything more component based and being able to specify PCM links via topology - Some more fixes for the topology code, though it is still not final and ready for enabling in production; we really need to get to the point where that can be done - A pile of changes for Intel SkyLake drivers which hopefully deliver some useful initial functionality for systems with this chipset, though there is more work still to come - Lots of new features and cleanups for the Renesas drivers - ANC support for WM5110 - New drivers: Imagination Technologies IPs, Atmel class D speaker, Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP - Rename PCM1792a driver to be generic pcm179x HD-Audio - Use audio component for i915 HDMI/DP hotplug handling - On-demand binding with i915 driver - bdl_pos_adj parameter adjustment for Baytrail controllers - Enable power_save_node for CX20722; this shouldn't lead to regression, hopefully - Kabylake HDMI/DP codec support - Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell machines - A few code refactoring FireWire - Lots of code cleanup and refactoring - Integrate the support of SCS.1x devices into snd-oxfw driver; snd-scs1x driver is obsoleted USB-audio - Fix possible NULL dereference at disconnection - A regression fix for Native Instruments devices Misc - A few code cleanups of fm801 driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJWmmhNAAoJEGwxgFQ9KSmk/wsP/3eO+giAT9VRPa6qxR6VdT6I dZwTxcp4ZzUrgLxk9k5VYjqey6QL+1xWfl3Abrd+NzXDj1wo4KsDh2XCKG1btO9K UpIZf76Nzt7o91pzHbsU6mrjDeoVNqloZoGbg1utAmmegaXH3owd18p/ZHfE3sz2 BbaHmYW/R8lnaBgBhzqJB97+zRaLJmMWpWHfpHaIPjdfw8/V4j76jtPnpmv2hDZl BHXVHcQXjVGunFRzxdzBLuTC+FmhzUeTAbbAdOT4fEoOCv5MtZqYppNxdhj+b9l5 mrsXe5FBTNmrt9Z5TtfCuzgJPkzoDperFb0aKd7wI1jVMtLzkNCMlanHr9U6B6fr jSrs6l25xrpF1BBfRMfHjNudA5vng/XC5dtW00JofXSrIxtwPNUoDDiqJgw7xVm5 aVWK7KkQIjRbHdCQaeTymv70oHHKei92hbCrXUobXZ7wLeJMXNVPT25ttChWrgAI 7cu5h+K5PjReI/sJFTMPL4aHZ+jAn9quQl7vK8EXiL9E6G8lLiuBiVW6hjGd9At+ Z6UyGV+nCM6O3qZcyParMuLkNtWx9uT7Pcn8oTZAdKPngNhsf8+yl9qmsFkNLDC4 LKPx0+rdCjtMKn2du3krsHhG3EN9pLDrE6g5U3d6Cz83e69Y7fCuSjl31SjD91H0 bZDcM/ejYSbid3yKN4TL =Gvgb -----END PGP SIGNATURE----- Merge tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We've had quite busy weeks in this cycle. Looking at ALSA core, the significant changes are a few fixes wrt timer and sequencer ioctls that have been revealed by fuzzer recently. Other than that, ASoC core got a few updates about DAI link handling, but these are rather straightforward refactoring. In drivers scene, ASoC received quite lots of new drivers in addition to bunch of updates for still ongoing Intel Skylake support and topology API. HD-audio gained a new HDMI/DP hotplug notification via component. FireWire got a pile of code refactoring/updates with SCS.1x driver integration. More highlights are shown below. [ NOTE: this contains also many commits for DRM. This is due to the pull of drm stable branch into sound tree, as the base of i915 audio component work for HD-audio. The highlights below don't contain these DRM changes, as these are supposed to be pulled via drm tree in anyway sooner or later. ] Core: - Handful fixes to harden ALSA timer and sequencer ioctls against races reported by syzkaller fuzzer - Irq description string can be unique to each card; only for HD-audio for now ASoC: - Conversion of the array of DAI links to a list for supporting dynamically adding and removing DAI links - Topology API enhancements to make everything more component based and being able to specify PCM links via topology - Some more fixes for the topology code, though it is still not final and ready for enabling in production; we really need to get to the point where that can be done - A pile of changes for Intel SkyLake drivers which hopefully deliver some useful initial functionality for systems with this chipset, though there is more work still to come - Lots of new features and cleanups for the Renesas drivers - ANC support for WM5110 - New drivers: Imagination Technologies IPs, Atmel class D speaker, Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP - Rename PCM1792a driver to be generic pcm179x HD-Audio: - Use audio component for i915 HDMI/DP hotplug handling - On-demand binding with i915 driver - bdl_pos_adj parameter adjustment for Baytrail controllers - Enable power_save_node for CX20722; this shouldn't lead to regression, hopefully - Kabylake HDMI/DP codec support - Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell machines - A few code refactoring FireWire: - Lots of code cleanup and refactoring - Integrate the support of SCS.1x devices into snd-oxfw driver; snd-scs1x driver is obsoleted USB-audio: - Fix possible NULL dereference at disconnection - A regression fix for Native Instruments devices Misc: - A few code cleanups of fm801 driver" * tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits) ALSA: timer: Code cleanup ALSA: timer: Harden slave timer list handling ALSA: hda - Add fixup for Dell Latitidue E6540 ALSA: timer: Fix race among timer ioctls ALSA: hda - add codec support for Kabylake display audio codec ALSA: timer: Fix double unlink of active_list ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices ALSA: hda - fix the headset mic detection problem for a Dell laptop ALSA: hda - Fix white noise on Dell Latitude E5550 ALSA: hda_intel: add card number to irq description ALSA: seq: Fix race at timer setup and close ALSA: seq: Fix missing NULL check at remove_events ioctl ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist ASoC: AMD: Add missing include file ALSA: hda - Fixup inverted internal mic for Lenovo E50-80 ALSA: usb: Add native DSD support for Oppo HA-1 ASoC: Make aux_dev more like a generic component ASoC: bcm2835: cleanup includes by ordering them alphabetically ASoC: AMD: Manage ACP 2.x SRAM banks power ... |
||
Sergey Senozhatsky
|
06b031de22 |
printk: change recursion_bug type to bool
`recursion_bug' is used as recursion_bug toggle, so make it `bool'. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tejun Heo
|
8d91f8b153 |
printk: do cond_resched() between lines while outputting to consoles
@console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Acked-by: Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Thierry Reding
|
81cc26f2bd |
printk: only unregister boot consoles when necessary
Boot consoles are typically replaced by proper consoles during the boot process. This can be problematic if the boot console data is part of the init section that is reclaimed late during boot. If the proper console does not register before this point in time, the boot console will need to be removed (so that the freed memory is not accessed), leaving the system without output for some time. There are various reasons why the proper console may not register early enough, such as deferred probe or the driver being a loadable module. If that happens, there is some amount of time where no console messages are visible to the user, which in turn can mean that they won't see crashes or other potentially useful information. To avoid this situation, only remove the boot console when it resides in the init section. Code exists to replace the boot console by the proper console when it is registered, keeping a seamless transition between the boot and proper consoles. Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrew Morton
|
b493c34309 |
kernel/stop_machine.c: remove CONFIG_SMP dependencies
stop_machine.o is only built if CONFIG_SMP=y, so this ifdef always evaluates to true. [akpm@linux-foundation.org: remove now-unneeded ifdef] Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dominik Dingel
|
4a9e1cda27 |
mm: bring in additional flag for fixup_user_fault to signal unlock
During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
3565fce3a6 |
mm, x86: get_user_pages() for dax mappings
A dax mapping establishes a pte with _PAGE_DEVMAP set when the driver has established a devm_memremap_pages() mapping, i.e. when the pfn_t return from ->direct_access() has PFN_DEV and PFN_MAP set. Later, when encountering _PAGE_DEVMAP during a page table walk we lookup and pin a struct dev_pagemap instance to keep the result of pfn_to_page() valid until put_page(). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Hansen <dave@sr71.net> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
5c2c2587b1 |
mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup
get_dev_page() enables paths like get_user_pages() to pin a dynamically mapped pfn-range (devm_memremap_pages()) while the resulting struct page objects are in use. Unlike get_page() it may fail if the device is, or is in the process of being, disabled. While the initial lookup of the range may be an expensive list walk, the result is cached to speed up subsequent lookups which are likely to be in the same mapped range. devm_memremap_pages() now requires a reference counter to be specified at init time. For pmem this means moving request_queue allocation into pmem_alloc() so the existing queue usage counter can track "device pages". ZONE_DEVICE pages always have an elevated count and will never be on an lru reclaim list. That space in 'struct page' can be redirected for other uses, but for safety introduce a poison value that will always trip __list_add() to assert. This allows half of the struct list_head storage to be reclaimed with some assurance to back up the assumption that the page count never goes to zero and a list_add() is never attempted. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Logan Gunthorpe <logang@deltatee.com> Cc: Dave Hansen <dave@sr71.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
4b94ffdc41 |
x86, mm: introduce vmem_altmap to augment vmemmap_populate()
In support of providing struct page for large persistent memory capacities, use struct vmem_altmap to change the default policy for allocating memory for the memmap array. The default vmemmap_populate() allocates page table storage area from the page allocator. Given persistent memory capacities relative to DRAM it may not be feasible to store the memmap in 'System Memory'. Instead vmem_altmap represents pre-allocated "device pages" to satisfy vmemmap_alloc_block_buf() requests. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
9476df7d80 |
mm: introduce find_dev_pagemap()
There are several scenarios where we need to retrieve and update metadata associated with a given devm_memremap_pages() mapping, and the only lookup key available is a pfn in the range: 1/ We want to augment vmemmap_populate() (called via arch_add_memory()) to allocate memmap storage from pre-allocated pages reserved by the device driver. At vmemmap_alloc_block_buf() time it grabs device pages rather than page allocator pages. This is in support of devm_memremap_pages() mappings where the memmap is too large to fit in main memory (i.e. large persistent memory devices). 2/ Taking a reference against the mapping when inserting device pages into the address_space radix of a given inode. This facilitates unmap_mapping_range() and truncate_inode_pages() operations when the driver is tearing down the mapping. 3/ get_user_pages() operations on ZONE_DEVICE memory require taking a reference against the mapping so that the driver teardown path can revoke and drain usage of device pages. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Logan Gunthorpe <logang@deltatee.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Williams
|
34c0fd540e |
mm, dax, pmem: introduce pfn_t
For the purpose of communicating the optional presence of a 'struct page' for the pfn returned from ->direct_access(), introduce a type that encapsulates a page-frame-number plus flags. These flags contain the historical "page_link" encoding for a scatterlist entry, but can also denote "device memory". Where "device memory" is a set of pfns that are not part of the kernel's linear mapping by default, but are accessed via the same memory controller as ram. The motivation for this new type is large capacity persistent memory that needs struct page entries in the 'memmap' to support 3rd party DMA (i.e. O_DIRECT I/O with a persistent memory source/target). However, we also need it in support of maintaining a list of mapped inodes which need to be unmapped at driver teardown or freeze_bdev() time. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave@sr71.net> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
14d27abd1d |
futex, thp: remove special case for THP in get_futex_key
With new THP refcounting, we don't need tricks to stabilize huge page.
If we've got reference to tail page, it can't split under us.
This patch effectively reverts
|
||
Kirill A. Shutemov
|
f627c2f537 |
memcg: adjust to support new THP refcounting
As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
d281ee6145 |
rmap: add argument to charge compound page
We're going to allow mapping of individual 4k pages of THP compound page. It means we cannot rely on PageTransHuge() check to decide if map/unmap small page or THP. The patch adds new argument to rmap functions to indicate whether we want to operate on whole compound page or only the small page. [n-horiguchi@ah.jp.nec.com: fix mapcount mismatch in hugepage migration] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
875fc4f5dd |
Merge branch 'akpm' (patches from Andrew)
Merge first patch-bomb from Andrew Morton: - A few hotfixes which missed 4.4 becasue I was asleep. cc'ed to -stable - A few misc fixes - OCFS2 updates - Part of MM. Including pretty large changes to page-flags handling and to thp management which have been buffered up for 2-3 cycles now. I have a lot of MM material this time. [ It turns out the THP part wasn't quite ready, so that got dropped from this series - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits) zsmalloc: reorganize struct size_class to pack 4 bytes hole mm/zbud.c: use list_last_entry() instead of list_tail_entry() zram/zcomp: do not zero out zcomp private pages zram: pass gfp from zcomp frontend to backend zram: try vmalloc() after kmalloc() zram/zcomp: use GFP_NOIO to allocate streams mm: add tracepoint for scanning pages drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64 mm/page_isolation: use macro to judge the alignment mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE() mm: rework virtual memory accounting include/linux/memblock.h: fix ordering of 'flags' argument in comments mm: move lru_to_page to mm_inline.h Documentation/filesystems: describe the shared memory usage/accounting memory-hotplug: don't BUG() in register_memory_resource() hugetlb: make mm and fs code explicitly non-modular mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuations mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd() mm: make sure isolate_lru_page() is never called for tail page vmstat: make vmstat_updater deferrable again and shut down on idle ... |
||
Linus Torvalds
|
0f0836b7eb |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina: - RO/NX attribute fixes for patch module relocations from Josh Poimboeuf. As part of this effort, module.c has been cleaned up as well and livepatching is piggy-backing on this cleanup. Rusty is OK with this whole lot going through livepatching tree. - symbol disambiguation support from Chris J Arges. That series is also Reviewed-by: Miroslav Benes <mbenes@suse.cz> but this came in only after I've alredy pushed out. Didn't want to rebase because of that, hence I am mentioning it here. - symbol lookup fix from Miroslav Benes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Cleanup module page permission changes module: keep percpu symbols in module's symtab module: clean up RO/NX handling. module: use a structure to encapsulate layout. gcov: use within_module() helper. module: Use the same logic for setting and unsetting RO/NX livepatch: function,sympos scheme in livepatch sysfs directory livepatch: add sympos as disambiguator field to klp_reloc livepatch: add old_sympos as disambiguator field to klp_func |
||
Konstantin Khlebnikov
|
8463833590 |
mm: rework virtual memory accounting
When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Christoph Lameter
|
0eb77e9880 |
vmstat: make vmstat_updater deferrable again and shut down on idle
Currently the vmstat updater is not deferrable as a result of commit |
||
Daniel Cashman
|
d07e22597d |
mm: mmap: add new /proc tunable for mmap_base ASLR
Address Space Layout Randomization (ASLR) provides a barrier to exploitation of user-space processes in the presence of security vulnerabilities by making it more difficult to find desired code/data which could help an attack. This is done by adding a random offset to the location of regions in the process address space, with a greater range of potential offset values corresponding to better protection/a larger search-space for brute force, but also to greater potential for fragmentation. The offset added to the mmap_base address, which provides the basis for the majority of the mappings for a process, is set once on process exec in arch_pick_mmap_layout() and is done via hard-coded per-arch values, which reflect, hopefully, the best compromise for all systems. The trade-off between increased entropy in the offset value generation and the corresponding increased variability in address space fragmentation is not absolute, however, and some platforms may tolerate higher amounts of entropy. This patch introduces both new Kconfig values and a sysctl interface which may be used to change the amount of entropy used for offset generation on a system. The direct motivation for this change was in response to the libstagefright vulnerabilities that affected Android, specifically to information provided by Google's project zero at: http://googleprojectzero.blogspot.com/2015/09/stagefrightened.html The attack presented therein, by Google's project zero, specifically targeted the limited randomness used to generate the offset added to the mmap_base address in order to craft a brute-force-based attack. Concretely, the attack was against the mediaserver process, which was limited to respawning every 5 seconds, on an arm device. The hard-coded 8 bits used resulted in an average expected success rate of defeating the mmap ASLR after just over 10 minutes (128 tries at 5 seconds a piece). With this patch, and an accompanying increase in the entropy value to 16 bits, the same attack would take an average expected time of over 45 hours (32768 tries), which makes it both less feasible and more likely to be noticed. The introduced Kconfig and sysctl options are limited by per-arch minimum and maximum values, the minimum of which was chosen to match the current hard-coded value and the maximum of which was chosen so as to give the greatest flexibility without generating an invalid mmap_base address, generally a 3-4 bits less than the number of bits in the user-space accessible virtual address space. When decided whether or not to change the default value, a system developer should consider that mmap_base address could be placed anywhere up to 2^(value) bits away from the non-randomized location, which would introduce variable-sized areas above and below the mmap_base address such that the maximum vm_area_struct size may be reduced, preventing very large allocations. This patch (of 4): ASLR only uses as few as 8 bits to generate the random offset for the mmap base address on 32 bit architectures. This value was chosen to prevent a poorly chosen value from dividing the address space in such a way as to prevent large allocations. This may not be an issue on all platforms. Allow the specification of a minimum number of bits so that platforms desiring greater ASLR protection may determine where to place the trade-off. Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jerome Marchand
|
eca56ff906 |
mm, shmem: add internal shmem resident memory accounting
Currently looking at /proc/<pid>/status or statm, there is no way to distinguish shmem pages from pages mapped to a regular file (shmem pages are mapped to /dev/zero), even though their implication in actual memory use is quite different. The internal accounting currently counts shmem pages together with regular files. As a preparation to extend the userspace interfaces, this patch adds MM_SHMEMPAGES counter to mm_rss_stat to account for shmem pages separately from MM_FILEPAGES. The next patch will expose it to userspace - this patch doesn't change the exported values yet, by adding up MM_SHMEMPAGES to MM_FILEPAGES at places where MM_FILEPAGES was used before. The only user-visible change after this patch is the OOM killer message that separates the reported "shmem-rss" from "file-rss". [vbabka@suse.cz: forward-porting, tweak changelog] Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vladimir Davydov
|
5d097056c9 |
kmemcg: account certain kmem allocations to memcg
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
d080827f85 |
libnvdimm for 4.5
1/ Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. 2/ Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. 3/ Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. 4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWlrhjAAoJEB7SkWpmfYgCFbAQALKsQfFwT6JFS+zlPgiNpbqw 2VMNKEH0AfGYGj96mT02j2q+vSUmXLMIDMTsbe0sDdtwFZtQbFmhmryzPWUVppSu KGTlLPW8vuEhQVs91+UI3BQKkvpi0+tbR8hPOh9W6QhjpRT+lyHFKnsNR5HZy5wB K4/VMaT5ffd5/pXRTjkYiPQYTwWyfcvNjICj0YtqhPvOwS031m77JpFsWJ8HSpEX K99VlzNUPMXd1pYkHmFNXWw52fhRGNhwAEomLeKMdQfKms+KnbKp8BOSA0aCqU8E kpujQcilDXJwykFQZOFI3Z5Dxvrv8lxFTU8HRMBvo3ESzfTWjfqcvyjGOjDUcruw ihESFSJtdZzhrBiMnf9RRqSpMFJvAT8MVT6Q4D3mZUHCMPbUqFJsQjMPt9hEH3ho 4F0D2lesOCkubUKFTZmjMoDb+szuKbVhYK8TeFVVEhizinc/Aj0NKuazJqi+CXB/ xh0ER4ZxD8wvzqFFWvS5UvR1G9I5fr7+3jGRUrqGLHlSdeXP9dkEg28ao3QbWk3x 1dPOen6ZqQ9WJ/E7eGmXbVEz2R4Xd79hMXQzdQwmKDk/KbxRoAp7hyU8BslAyrBf HCdmVt+RAgrxZYfFRXuLhqwEBThJnNrgZA3qu74FUpkpFg6xRUu1bAYBiF7N+bFi 82b5UbMkveBTtkXjJoiR =7V5r -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has appeared in -next and independently received a build success notification from the kbuild robot. The 'for-4.5/block- dax' topic branch was rebased over the weekend to drop the "block device end-of-life" rework that Al would like to see re-implemented with a notifier, and to address bug reports against the badblocks integration. There is pending feedback against "libnvdimm: Add a poison list and export badblocks" received last week. Linda identified some localized fixups that we will handle incrementally. Summary: - Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. - Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. - Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. - Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes" * tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits) block: kill disk_{check|set|clear|alloc}_badblocks libnvdimm, pmem: nvdimm_read_bytes() badblocks support pmem, dax: disable dax in the presence of bad blocks pmem: fail io-requests to known bad blocks libnvdimm: convert to statically allocated badblocks libnvdimm: don't fail init for full badblocks list block, badblocks: introduce devm_init_badblocks block: clarify badblocks lifetime badblocks: rename badblocks_free to badblocks_exit libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h libnvdimm: Add a poison list and export badblocks nfit_test: Enable DSMs for all test NFITs md: convert to use the generic badblocks code block: Add badblock management for gendisks badblocks: Add core badblock management code block: fix del_gendisk() vs blkdev_ioctl crash block: enable dax for raw block devices block: introduce bdev_file_inode() restrict /dev/mem to idle io memory ranges arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug ... |
||
Markus Elfring
|
d865e573b8 |
audit: Delete unnecessary checks before two function calls
The functions consume_skb() and kfree_skb() test whether their argument is NULL and then return immediately. Thus the tests around their calls are not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [PM: tweak patch prefix] Signed-off-by: Paul Moore <pmoore@redhat.com> |
||
Richard Guy Briggs
|
1194b994be |
audit: wake up threads if queue switched from limited to unlimited
If the audit_backlog_limit is changed from a limited value to an unlimited value (zero) while the queue was overflowed, wake up the audit_backlog_wait queue to allow those processes to continue. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com> |
||
Richard Guy Briggs
|
f48a942926 |
audit: include auditd's threads in audit_log_start() wait exception
Should auditd spawn threads, allow all members of its thread group to use the audit_backlog_limit reserves to bypass the queue limits too. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: minor upstream merge tweaks] Signed-off-by: Paul Moore <pmoore@redhat.com> |
||
Paul Moore
|
eb8baf6aa3 |
audit: remove audit_backlog_wait_overflow
It seems much more obvious and readable to simply use "0". Signed-off-by: Paul Moore <pmoore@redhat.com> |
||
Richard Guy Briggs
|
c4b7a7755f |
audit: don't needlessly reset valid wait time
After auditd has recovered from an overflowed queue, the first process that doesn't use reserves to make it through the queue checks should reset the audit backlog wait time to the configured value. After that, there is no need to keep resetting it. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com> |
||
Linus Torvalds
|
67990608c8 |
Power management and ACPI updates for v4.5-rc1
- Add a debugfs-based interface for interacting with the ACPICA's AML debugger introduced in the previous cycle and a new user space tool for that, fix some bugs related to the AML debugger and clean up the code in question (Lv Zheng, Dan Carpenter, Colin Ian King, Markus Elfring). - Update ACPICA to upstream revision 20151218 including a number of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael Wysocki). In particular, the previously added erroneous support for the _SUB object is dropped, the concatenate operator will support all ACPI objects now, the Debug Object handling is improved, the SuperName handling of parameters being control methods is fixed, the ObjectType operator handling is updated to follow ACPI 5.0A and the handling of CondRefOf and RefOf is updated accordingly, module-level code will be executed after loading each ACPI table now (instead of being run once after all tables containing AML have been loaded), the Operation Region handlers management is updated to fix some reported problems and a the ACPICA code in the kernel is more in line with the upstream now. - Update the ACPI backlight driver to provide information on whether or not it will generate key-presses for brightness change hotkeys and update some platform drivers (dell-wmi, thinkpad_acpi) to use that information to avoid sending double key-events to users pace for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht). - Improve the ACPI handling of interrupt GPIOs (Christophe Ricard). - Fix the handling of the list of device IDs of device objects found in the ACPI namespace and add a helper for checking if there is a device object for a given device ID (Lukas Wunner). - Change the logic in the ACPI namespace scanning code to create struct acpi_device objects for all ACPI device objects found in the namespace even if _STA fails for them which helps to avoid device enumeration problems on Microsoft Surface 3 (Aaron Lu). - Add support for the APM X-Gene ACPI I2C device to the ACPI driver for AMD SoCs (Loc Ho). - Fix the long-standing issue with the DMA controller on Intel SoCs where ACPI tables have no power management support for the DMA controller itself, but it can be powered off automatically when the last (other) device on the SoC is powered off via ACPI and clean up the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts to fix that problem (Andy Shevchenko). - Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King, Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki, Sinan Kaya). - Update the device properties framework for better handling of built-in properties, add support for built-in properties to the platform bus type, update the MFD subsystem's handling of device properties and add support for passing default configuration data as device properties to the intel-lpss MFD drivers, convert the designware I2C driver to use the unified device properties API and add a fallback mechanism for using default built-in properties if the platform firmware fails to provide the properties as expected by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus, Andrew Morton). - Add new Device Tree bindings to the Operating Performance Points (OPP) framework and update the exynos4412 DT binding accordingly, introduce debugfs support for the OPP framework (Viresh Kumar, Bartlomiej Zolnierkiewicz). - Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng Chen). - Update the cpufreq core to make the handling of governors more efficient, especially on systems where policy objects are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki). - Fix cpufreq governor handling on configurations with CONFIG_HZ_PERIODIC set (Chen Yu). - Clean up the cpufreq core code related to the boost sysfs knob support and update the ACPI cpufreq driver accordingly (Rafael Wysocki). - Add a new cpufreq driver for ST platforms and corresponding Device Tree bindings (Lee Jones). - Update the intel_pstate driver to allow the P-state selection algorithm used by it to depend on the CPU ID of the processor it is running on, make it use a special P-state selection algorithm (with an IO wait time compensation tweak) on Atom CPUs based on the Airmont and Silvermont cores so as to reduce their energy consumption and improve intel_pstate documentation (Philippe Longepe, Srinivas Pandruvada). - Update the cpufreq-dt driver to support registering cooling devices that use the (P * V^2 * f) dynamic power draw formula where V is the voltage, f is the frequency and P is a constant coefficient provided by Device Tree and update the arm_big_little cpufreq driver to use that support (Punit Agrawal). - Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq, blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob Tanenbaum, Markus Elfring). - cpuidle core tweaks related to polling and measured_us calculation (Rik van Riel). - Removal of modularity from a few cpuidle drivers (clps711x, ux500, exynos) that cannot be built as modules in practice (Paul Gortmaker). - PM core update to prevent devices from being probed during system suspend/resume which is generally problematic and may lead to inconsistent behavior (Grygorii Strashko). - Assorted updates of the PM core and related code (Julia Lawall, Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf Hansson). - PNP bus type updates (Christophe Le Roy, Heiner Kallweit). - PCI PM code cleanups (Jarkko Nikula, Julia Lawall). - cpupower tool updates (Jacob Tanenbaum, Thomas Renninger). / -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJWlZOmAAoJEILEb/54YlRxxtEP/ioR0xMOJQcWd5F6Oyj1PZsx vJeXsmL3fXFAlr6riaE966QqclhUTDhhex3kbFmNQvM8WukxOmBWy5UMSjRg2UmM PHrogc/KrrE+xb8hjGZPgqVr+/L9O3C6lZmM+AUciT0hWZJckYgRh5TpHb1xN/Kx MptvtSXRBM62LWytug+EwA4SHt7OFS0yJ/CI1pKvODVtLaYDIPI5k+4ilPU7y6Be vfoysvmUozNTEYxgPOPXfoQqW2P5t2df32Re31uKtLenLXbc8KW0wIYm24DXgSK6 V/TyDVZTNaZk6OpTqWrjqFbedpGvcBpViwYEY7yv33GDCpXGdHQl3ga+Jy6PAUem 7oGDZtA+5Di/8szhH/wSdpXwSaKEeUdFiaj6Uw2MAwiY4wzv5+WmLRcuIjQFDAxT elrTbQhAgaMlMsUkQ9NV4GC7ByUeeQX2NpCielsHngOQgKdYRQHyYUgGXc2Wgjdq UnVrIWRHzXSED0RtPI7IT0Y4PSxkM9UoSEiVUwt3srCue2CFzuENs23qaDgAzeDa 5uwnDl4RhI2BrLVT1WhioIFgFE5Yh5Xx6dSGC+jcU2ss8r2oN6DdUbqOzWAa1iR4 sFhgwwwizpCCfB6pSqEuDdg8W56HjvE9kQY9kcTPPNPbktL0VImC+iiSN/CgZJv9 MH9NbQM8uHkfNcpjsN7V =OlYA -----END PGP SIGNATURE----- Merge tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull oower management and ACPI updates from Rafael Wysocki: "As far as the number of commits goes, ACPICA takes the lead this time, followed by cpufreq and the device properties framework changes. The most significant new feature is the debugfs-based interface to the ACPICA's AML debugger added in the previous cycle and a new user space tool for accessing it. On the cpufreq front, the core is updated to handle governors more efficiently, particularly on systems where a single cpufreq policy object is shared between multiple CPUs, and there are quite a few changes in drivers (intel_pstate, cpufreq-dt etc). The device properties framework is updated to handle built-in (ie included in the kernel itself) device properties better, among other things by adding a fallback mechanism that will allow drivers to provide default properties to be used in case the plaform firmware doesn't provide the properties expected by them. The Operating Performance Points (OPP) framework gets new DT bindings and debugfs support. A new cpufreq driver for ST platforms is added and the ACPI driver for AMD SoCs will now support the APM X-Gene ACPI I2C device. The rest is mostly fixes and cleanups all over. Specifics: - Add a debugfs-based interface for interacting with the ACPICA's AML debugger introduced in the previous cycle and a new user space tool for that, fix some bugs related to the AML debugger and clean up the code in question (Lv Zheng, Dan Carpenter, Colin Ian King, Markus Elfring). - Update ACPICA to upstream revision 20151218 including a number of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael Wysocki). In particular, the previously added erroneous support for the _SUB object is dropped, the concatenate operator will support all ACPI objects now, the Debug Object handling is improved, the SuperName handling of parameters being control methods is fixed, the ObjectType operator handling is updated to follow ACPI 5.0A and the handling of CondRefOf and RefOf is updated accordingly, module- level code will be executed after loading each ACPI table now (instead of being run once after all tables containing AML have been loaded), the Operation Region handlers management is updated to fix some reported problems and a the ACPICA code in the kernel is more in line with the upstream now. - Update the ACPI backlight driver to provide information on whether or not it will generate key-presses for brightness change hotkeys and update some platform drivers (dell-wmi, thinkpad_acpi) to use that information to avoid sending double key-events to users pace for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht). - Improve the ACPI handling of interrupt GPIOs (Christophe Ricard). - Fix the handling of the list of device IDs of device objects found in the ACPI namespace and add a helper for checking if there is a device object for a given device ID (Lukas Wunner). - Change the logic in the ACPI namespace scanning code to create struct acpi_device objects for all ACPI device objects found in the namespace even if _STA fails for them which helps to avoid device enumeration problems on Microsoft Surface 3 (Aaron Lu). - Add support for the APM X-Gene ACPI I2C device to the ACPI driver for AMD SoCs (Loc Ho). - Fix the long-standing issue with the DMA controller on Intel SoCs where ACPI tables have no power management support for the DMA controller itself, but it can be powered off automatically when the last (other) device on the SoC is powered off via ACPI and clean up the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts to fix that problem (Andy Shevchenko). - Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King, Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki, Sinan Kaya). - Update the device properties framework for better handling of built-in properties, add support for built-in properties to the platform bus type, update the MFD subsystem's handling of device properties and add support for passing default configuration data as device properties to the intel-lpss MFD drivers, convert the designware I2C driver to use the unified device properties API and add a fallback mechanism for using default built-in properties if the platform firmware fails to provide the properties as expected by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus, Andrew Morton). - Add new Device Tree bindings to the Operating Performance Points (OPP) framework and update the exynos4412 DT binding accordingly, introduce debugfs support for the OPP framework (Viresh Kumar, Bartlomiej Zolnierkiewicz). - Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng Chen). - Update the cpufreq core to make the handling of governors more efficient, especially on systems where policy objects are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki). - Fix cpufreq governor handling on configurations with CONFIG_HZ_PERIODIC set (Chen Yu). - Clean up the cpufreq core code related to the boost sysfs knob support and update the ACPI cpufreq driver accordingly (Rafael Wysocki). - Add a new cpufreq driver for ST platforms and corresponding Device Tree bindings (Lee Jones). - Update the intel_pstate driver to allow the P-state selection algorithm used by it to depend on the CPU ID of the processor it is running on, make it use a special P-state selection algorithm (with an IO wait time compensation tweak) on Atom CPUs based on the Airmont and Silvermont cores so as to reduce their energy consumption and improve intel_pstate documentation (Philippe Longepe, Srinivas Pandruvada). - Update the cpufreq-dt driver to support registering cooling devices that use the (P * V^2 * f) dynamic power draw formula where V is the voltage, f is the frequency and P is a constant coefficient provided by Device Tree and update the arm_big_little cpufreq driver to use that support (Punit Agrawal). - Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq, blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob Tanenbaum, Markus Elfring). - cpuidle core tweaks related to polling and measured_us calculation (Rik van Riel). - Removal of modularity from a few cpuidle drivers (clps711x, ux500, exynos) that cannot be built as modules in practice (Paul Gortmaker). - PM core update to prevent devices from being probed during system suspend/resume which is generally problematic and may lead to inconsistent behavior (Grygorii Strashko). - Assorted updates of the PM core and related code (Julia Lawall, Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf Hansson). - PNP bus type updates (Christophe Le Roy, Heiner Kallweit). - PCI PM code cleanups (Jarkko Nikula, Julia Lawall). - cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)" * tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits) PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device PM / OPP: Use snprintf() instead of sprintf() Documentation: cpufreq: intel_pstate: enhance documentation ACPI, PCI, irq: remove redundant check for null string pointer ACPI / video: driver must be registered before checking for keypresses cpufreq-dt: fix handling regulator_get_voltage() result cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC PM / sleep: Add support for read-only sysfs attributes ACPI: Fix white space in a structure definition ACPI / SBS: fix inconsistent indenting inside if statement PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching ACPI / PNP: constify device IDs ACPI / PCI: Simplify acpi_penalize_isa_irq() ... |
||
Linus Torvalds
|
c17488d066 |
Not much new with tracing for this release. Mostly just clean ups and
minor fixes. Here's what else is new: o A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for those that want both. o New selftest to test the instance create and delete o Better debug output when ftrace fails -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWlU8tAAoJEKKk/i67LK/8JckH/2XIhjwMunm35uCg1308sDqy d44G3+p0pm8ztjBf8iD8wH2nP3m7z+nC8JBmSPIUgAHsKOYHWsBy2A/36OVWv5lK 1hVXvBwOuZXnyWXr7bC2RO9S9f9acSFaabZXWDi1BCJRJSgEcknz32V7ZAL4jOCO SfBWBNrWJfUsURbfbElfVxPLArvyUg9Bb5dW5B+QFf6PuoJaORYzNLYXHlbsq++T WlrlnD+mFZ/DKFZ/gl3FMSGMPaGimw09/3eqMzv/tLQobp6PbCWlJTwjUoxJ/9dO XOY4sWUrUUZilU8qCk0i0ZSEumWmE+SWS3eq+Ef18B/5haIj/LkoM4UQD3h2Rc4= =FDR+ -----END PGP SIGNATURE----- Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Not much new with tracing for this release. Mostly just clean ups and minor fixes. Here's what else is new: - A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for those that want both. - New selftest to test the instance create and delete - Better debug output when ftrace fails" * tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits) ftrace: Fix the race between ftrace and insmod ftrace: Add infrastructure for delayed enabling of module functions x86: ftrace: Fix the comments for ftrace_modify_code_direct() tracing: Fix comment to use tracing_on over tracing_enable metag: ftrace: Fix the comments for ftrace_modify_code sh: ftrace: Fix the comments for ftrace_modify_code() ia64: ftrace: Fix the comments for ftrace_modify_code() ftrace: Clean up ftrace_module_init() code ftrace: Join functions ftrace_module_init() and ftrace_init_module() tracing: Introduce TRACE_EVENT_FN_COND macro tracing: Use seq_buf_used() in seq_buf_to_user() instead of len bpf: Constify bpf_verifier_ops structure ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too ftrace: Remove use of control list and ops ftrace: Fix output of enabled_functions for showing tramp ftrace: Fix a typo in comment ftrace: Show all tramps registered to a record on ftrace_bug() ftrace: Add variable ftrace_expected for archs to show expected code ftrace: Add new type to distinguish what kind of ftrace_bug() tracing: Update cond flag when enabling or disabling a trigger ... |
||
Linus Torvalds
|
34a9304a96 |
Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - cgroup v2 interface is now official. It's no longer hidden behind a devel flag and can be mounted using the new cgroup2 fs type. Unfortunately, cpu v2 interface hasn't made it yet due to the discussion around in-process hierarchical resource distribution and only memory and io controllers can be used on the v2 interface at the moment. - The existing documentation which has always been a bit of mess is relocated under Documentation/cgroup-v1/. Documentation/cgroup-v2.txt is added as the authoritative documentation for the v2 interface. - Some features are added through for-4.5-ancestor-test branch to enable netfilter xt_cgroup match to use cgroup v2 paths. The actual netfilter changes will be merged through the net tree which pulled in the said branch. - Various cleanups * 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: rename cgroup documentations cgroup: fix a typo. cgroup: Remove resource_counter.txt in Documentation/cgroup-legacy/00-INDEX. cgroup: demote subsystem init messages to KERN_DEBUG cgroup: Fix uninitialized variable warning cgroup: put controller Kconfig options in meaningful order cgroup: clean up the kernel configuration menu nomenclature cgroup_pids: fix a typo. Subject: cgroup: Fix incomplete dd command in blkio documentation cgroup: kill cgrp_ss_priv[CGROUP_CANFORK_COUNT] and friends cpuset: Replace all instances of time_t with time64_t cgroup: replace unified-hierarchy.txt with a proper cgroup v2 documentation cgroup: rename Documentation/cgroups/ to Documentation/cgroup-legacy/ cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type |
||
Linus Torvalds
|
aee3bfa330 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from Davic Miller: 1) Support busy polling generically, for all NAPI drivers. From Eric Dumazet. 2) Add byte/packet counter support to nft_ct, from Floriani Westphal. 3) Add RSS/XPS support to mvneta driver, from Gregory Clement. 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes Frederic Sowa. 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai. 6) Add support for VLAN device bridging to mlxsw switch driver, from Ido Schimmel. 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski. 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko. 9) Reorganize wireless drivers into per-vendor directories just like we do for ethernet drivers. From Kalle Valo. 10) Provide a way for administrators "destroy" connected sockets via the SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti. 11) Add support to add/remove multicast routes via netlink, from Nikolay Aleksandrov. 12) Make TCP keepalive settings per-namespace, from Nikolay Borisov. 13) Add forwarding and packet duplication facilities to nf_tables, from Pablo Neira Ayuso. 14) Dead route support in MPLS, from Roopa Prabhu. 15) TSO support for thunderx chips, from Sunil Goutham. 16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon. 17) Rationalize, consolidate, and more completely document the checksum offloading facilities in the networking stack. From Tom Herbert. 18) Support aborting an ongoing scan in mac80211/cfg80211, from Vidyullatha Kanchanapally. 19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits) net: bnxt: always return values from _bnxt_get_max_rings net: bpf: reject invalid shifts phonet: properly unshare skbs in phonet_rcv() dwc_eth_qos: Fix dma address for multi-fragment skbs phy: remove an unneeded condition mdio: remove an unneed condition mdio_bus: NULL dereference on allocation error net: Fix typo in netdev_intersect_features net: freescale: mac-fec: Fix build error from phy_device API change net: freescale: ucc_geth: Fix build error from phy_device API change bonding: Prevent IPv6 link local address on enslaved devices IB/mlx5: Add flow steering support net/mlx5_core: Export flow steering API net/mlx5_core: Make ipv4/ipv6 location more clear net/mlx5_core: Enable flow steering support for the IB driver net/mlx5_core: Initialize namespaces only when supported by device net/mlx5_core: Set priority attributes net/mlx5_core: Connect flow tables net/mlx5_core: Introduce modify flow table command net/mlx5_core: Managing root flow table ... |
||
Linus Torvalds
|
33caf82acf |
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro: "All kinds of stuff. That probably should've been 5 or 6 separate branches, but by the time I'd realized how large and mixed that bag had become it had been too close to -final to play with rebasing. Some fs/namei.c cleanups there, memdup_user_nul() introduction and switching open-coded instances, burying long-dead code, whack-a-mole of various kinds, several new helpers for ->llseek(), assorted cleanups and fixes from various people, etc. One piece probably deserves special mention - Neil's lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets called without ->i_mutex and tries to avoid ever taking it. That, of course, means that it's not useful for any directory modifications, but things like getting inode attributes in nfds readdirplus are fine with that. I really should've asked for moratorium on lookup-related changes this cycle, but since I hadn't done that early enough... I *am* asking for that for the coming cycle, though - I'm going to try and get conversion of i_mutex to rwsem with ->lookup() done under lock taken shared. There will be a patch closer to the end of the window, along the lines of the one Linus had posted last May - mechanical conversion of ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/ inode_is_locked()/inode_lock_nested(). To quote Linus back then: ----- | This is an automated patch using | | sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/' | sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/' | sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/' | sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/' | sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/' | | with a very few manual fixups ----- I'm going to send that once the ->i_mutex-affecting stuff in -next gets mostly merged (or when Linus says he's about to stop taking merges)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) nfsd: don't hold i_mutex over userspace upcalls fs:affs:Replace time_t with time64_t fs/9p: use fscache mutex rather than spinlock proc: add a reschedule point in proc_readfd_common() logfs: constify logfs_block_ops structures fcntl: allow to set O_DIRECT flag on pipe fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE fs: xattr: Use kvfree() [s390] page_to_phys() always returns a multiple of PAGE_SIZE nbd: use ->compat_ioctl() fs: use block_device name vsprintf helper lib/vsprintf: add %*pg format specifier fs: use gendisk->disk_name where possible poll: plug an unused argument to do_poll amdkfd: don't open-code memdup_user() cdrom: don't open-code memdup_user() rsxx: don't open-code memdup_user() mtip32xx: don't open-code memdup_user() [um] mconsole: don't open-code memdup_user_nul() [um] hostaudio: don't open-code memdup_user() ... |
||
Linus Torvalds
|
fce205e9da |
Merge branch 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs copy_file_range updates from Al Viro: "Several series around copy_file_range/CLONE" * 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: btrfs: use new dedupe data function pointer vfs: hoist the btrfs deduplication ioctl to the vfs vfs: wire up compat ioctl for CLONE/CLONE_RANGE cifs: avoid unused variable and label nfsd: implement the NFSv4.2 CLONE operation nfsd: Pass filehandle to nfs4_preprocess_stateid_op() vfs: pull btrfs clone API to vfs layer locks: new locks_mandatory_area calling convention vfs: Add vfs_copy_file_range() support for pagecache copies btrfs: add .copy_file_range file operation x86: add sys_copy_file_range to syscall tables vfs: add copy_file_range syscall and vfs helper |
||
Rabin Vincent
|
229394e8e6 |
net: bpf: reject invalid shifts
On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
c9bed1cf51 |
xen: features and fixes for 4.5-rc0
- Stolen ticks and PV wallclock support for arm/arm64. - Add grant copy ioctl to gntdev device. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWk5IUAAoJEFxbo/MsZsTRLxwH/1BDcrbQDRc5hxUOG9JEYSUt H/lMjvZRShPkzweijdNon95ywAXhcSbkS9IV2Mp0+CZV7VyeymW7QIW/g4+G6iRg +LnoV77PAhPv/cmsr1pENXqRCclvemlxQOf7UyWLezuKhB71LC+oNaEnpk/tPIZS et/qef+m/SgSP5R91nO0Esv2KfP7za0UrgJf3Ee4GzjSeDkya0Hko06Cy3yc1/RT 082kHpQ1/KFcHHh2qhdCQwyzhq/cwFkuDA6ksKYJoxC6YAVC2mvvkuIOZYbloHDL c/dzuP9qjjxOZ7Gblv2cmg+RE4UqRfBhxmMycxSCcwW/Mt5LaftCpAxpBQKq2/8= =6F/q -----END PGP SIGNATURE----- Merge tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.5-rc0: - Stolen ticks and PV wallclock support for arm/arm64 - Add grant copy ioctl to gntdev device" * tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: add ioctl for grant copy x86/xen: don't reset vcpu_info on a cancelled suspend xen/gntdev: constify mmu_notifier_ops structures xen/grant-table: constify gnttab_ops structure xen/time: use READ_ONCE xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify xen/x86: support XENPF_settime64 xen/arm: set the system time in Xen via the XENPF_settime64 hypercall xen/arm: introduce xen_read_wallclock arm: extend pvclock_wall_clock with sec_hi xen: introduce XENPF_settime64 xen/arm: introduce HYPERVISOR_platform_op on arm and arm64 xen: rename dom0_op to platform_op xen/arm: account for stolen ticks arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops missing include asm/paravirt.h in cputime.c xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c |