vcpu_load() can return NULL and it sometimes does in failure paths (for
example when the userspace ABI version is too old) - causing a preemption
count underflow in the ->vcpu_free() later on. So check for NULL.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Or 32-bit userspace will get confused.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We report the value of cr8 to userspace on an exit. Also let userspace change
cr8 when we re-enter the guest. The lets 64-bit guest code maintain the tpr
correctly.
Thanks for Yaniv Kamay for the idea.
Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows us to run the mmu testsuite on amd.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kvm mmu relies on cr0.wp being set even if the guest does not set it. The
vmx code correctly forces cr0.wp at all times, the svm code does not, so it
can't boot solaris without this patch.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just like svm.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gva_to_gpa() needs to be updated to the new walk_addr() calling convention,
otherwise it may oops under some circumstances.
Use the opportunity to remove all the code duplication in gva_to_gpa(), which
essentially repeats the calculations in walk_addr().
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Forms like "0(%rsp)" generate an instruction with an unnecessary one byte
displacement under certain circumstances. replace with the equivalent
"(%rsp)".
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Intel hosts, without long mode, and with nx support disabled in the bios
have an efer that is readable but not writable. This causes a lockup on
switch to guest mode (even though it should exit with reason 34 according
to the documentation).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix what looks like an obvious typo in the file drivers/kvm/svm.c.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch implements forwarding of SHUTDOWN intercepts from the guest on to
userspace on AMD SVM. A SHUTDOWN event occurs when the guest produces a
triple fault (e.g. on reboot). This also fixes the bug that a guest reboot
actually causes a host reboot under some circumstances.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the recent guest page fault change, we perform access checks on our
own instead of relying on the cpu. This means we have to perform the nx
checks as well.
Software like the google toolbar on windows appears to rely on this
somehow.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check pte permission bits in walk_addr(), instead of scattering the checks all
over the code. This has the following benefits:
1. We no longer set the accessed bit for accessed which fail permission checks.
2. Setting the accessed bit is simplified.
3. Under some circumstances, we used to pretend a page fault was fixed when
it would actually fail the access checks. This caused an unnecessary
vmexit.
4. The error code for guest page faults is now correct.
The fix helps netbsd further along booting, and allows kvm to pass the new mmu
testsuite.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows netbsd 3.1 i386 to get further along installing.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's an obvious typo in svm_{get,set}_idt, causing it to access the ldt
instead.
Because these functions are only called for save/load on AMD, the bug does not
impact normal operation. With the fix, save/load works as expected on AMD
hosts.
Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a page is marked as dirty in the guest pte, set_pte_common() can set the
writable bit on newly-instantiated shadow pte. This optimization avoids
a write fault after the initial read fault.
However, if a write fault instantiates the pte, fix_write_pf() incorrectly
reports the fault as a guest page fault, and the guest oopses on what appears
to be a correctly-mapped page.
Fix is to detect the condition and only report a guest page fault on a user
access to a kernel page.
With the fix, a kvm guest can survive a whole night of running the kernel
hacker's screensaver (make -j9 in a loop).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The various bit string instructions (bts, btc, etc.) fail to adjust the
address correctly if the bit address is beyond BITS_PER_LONG.
This bug creeped in as the emulator originally relied on cr2 to contain the
memory address; however we now decode it from the mod r/m bits, and must
adjust the offset to account for large bit indices.
The patch is rather large because it switches src and dst decoding around, so
that the bit index is available when decoding the memory address.
This fixes workloads like the FC5 installer.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kvm mmio read path looks like:
1. guest read faults
2. kvm emulates read, calls emulator_read_emulated()
3. fails as a read requires userspace help
4. exit to userspace
5. userspace emulates read, kvm sets vcpu->mmio_read_completed
6. re-enter guest, fault again
7. kvm emulates read, calls emulator_read_emulated()
8. succeeds as vcpu->mmio_read_emulated is set
9. instruction completes and guest is resumed
A problem surfaces if the userspace exit (step 5) also requests an interrupt
injection. In that case, the guest does not re-execute the original
instruction, but the interrupt handler. The next time an mmio read is
exectued (likely for a different address), step 3 will find
vcpu->mmio_read_completed set and return the value read for the original
instruction.
The problem manifested itself in a few annoying ways:
- little squares appear randomly on console when switching virtual terminals
- ne2000 fails under nfs read load
- rtl8139 complains about "pci errors" even though the device model is
incapable of issuing them.
Fix by skipping interrupt injection if an mmio read is pending.
A better fix is to avoid re-entry into the guest, and re-emulating immediately
instead. However that's a bit more complex.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes the vmwrite errors on vm shutdown go away.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both "=r" and "=g" breaks my build on i386:
$ make
CC [M] drivers/kvm/vmx.o
{standard input}: Assembler messages:
{standard input}:3318: Error: bad register name `%sil'
make[1]: *** [drivers/kvm/vmx.o] Error 1
make: *** [_module_drivers/kvm] Error 2
The reason is that setbe requires an 8-bit register but "=r" does not
constrain the target register to be one that has an 8-bit version on
i386.
According to
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153
the correct constraint is "=q".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No need to test for rflags.if as both VT and SVM specs assure us that on exit
caused from interrupt window opening, 'if' is set.
Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Prevent the guest's loading of a corrupt cr3 (pointing at no guest phsyical
page) from crashing the host.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If we emulate a write, we fail to set the dirty bit on the guest pte, leading
the guest to believe the page is clean, and thus lose data. Bad.
Fix by setting the guest pte dirty bit under such conditions.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It overwrites the right cr3 set from mmu setup. Happens only with the test
harness.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes oops on early close of /dev/kvm.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This will allow us to see the root cause when a vmwrite error happens.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If we reduce permissions on a pte, we must flush the cached copy of the pte
from the guest's tlb.
This is implemented at the moment by flushing the entire guest tlb, and can be
improved by flushing just the relevant virtual address, if it is known.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The mmu sometimes needs memory for reverse mapping and parent pte chains.
however, we can't allocate from within the mmu because of the atomic context.
So, move the allocations to a central place that can be executed before the
main mmu machinery, where we can bail out on failure before any damage is
done.
(error handling is deffered for now, but the basic structure is there)
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Because mmu pages have attached rmap and parent pte chain structures, we need
to zap them before freeing so the attached structures are freed.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cmpxchg8b uses edx:eax as the compare operand, not edi:eax.
cmpxchg8b is used by 32-bit pae guests to set page table entries atomically,
and this is emulated touching shadowed guest page tables.
Also, implement it for 32-bit hosts.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We always need cr3 to point to something valid, so if we detect that we're
freeing a root page, simply push it back to the top of the active list.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In fork() (or when we protect a page that is no longer a page table), we can
experience floods of writes to a page, which have to be emulated. This is
expensive.
So, if we detect such a flood, zap the page so subsequent writes can proceed
natively.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A misaligned access affects two shadow ptes instead of just one.
Since a misaligned access is unlikely to occur on a real page table, just zap
the page out of existence, avoiding further trouble.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since we write protect shadowed guest page tables, there is no need to trap
page invalidations (the guest will always change the mapping before issuing
the invlpg instruction).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
