Commit Graph

99455 Commits

Author SHA1 Message Date
Dimitri Sivanich
5d061e397d x86, uv: update x86 mmr list for SGI uv
This patch updates the X86 mmr list for SGI uv.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:24 +02:00
Jack Steiner
83f5d894ca x86: map UV chipset space - UV support
Create page table entries to map the SGI UV chipset GRU. local MMR &
global MMR ranges.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:23 +02:00
Jack Steiner
3a9e189d69 x86: map UV chipset space - pagetable
Add boot-time function for creating additional 2MB page table entries for
mapping chipset specific cached/uncached ranges.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:23 +02:00
Yinghai Lu
fc9036ea1a x86: let early_reserve_e820 update e820_saved too
so when it is called after early_param, e820_saved get updated too.
esp for mpc update.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:22 +02:00
Yinghai Lu
a0a0becd2d x86: make e820_saved have update from setup_data
seperate reserve_setup_data into e820_reserved_setup_data,
and reserve_early_setup_data.

So could use e820_reserved_setup_data to backup e820 with setup_data.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ying Huang <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:22 +02:00
Yinghai Lu
0be15526be x86: move saving e820_saved to setup_memory_map
so other path that will override memory_setup or
machine_specific_memory_setup could have e820_saved too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09 07:43:21 +02:00
Bernhard Walle
5dfcf14d5b x86: use FIRMWARE_MEMMAP on x86/E820
This patch uses the /sys/firmware/memmap interface provided in the last patch
on the x86 architecture when E820 is used. The patch copies the E820
memory map very early, and registers the E820 map afterwards via
firmware_map_add_early().

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 17:55:42 +02:00
Bernhard Walle
69ac9cd629 sysfs: add /sys/firmware/memmap
This patch adds /sys/firmware/memmap interface that represents the BIOS
(or Firmware) provided memory map. The tree looks like:

    /sys/firmware/memmap/0/start   (hex number)
                           end     (hex number)
                           type    (string)
    ...                 /1/start
                           end
                           type

With the following shell snippet one can print the memory map in the same form
the kernel prints itself when booting on x86 (the E820 map).

  --------- 8< --------------------------
    #!/bin/sh
    cd /sys/firmware/memmap
    for dir in * ; do
        start=$(cat $dir/start)
        end=$(cat $dir/end)
        type=$(cat $dir/type)
        printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
    done
  --------- >8 --------------------------

That patch only provides the needed interface:

 1. The sysfs interface.
 2. The structure and enumeration definition.
 3. The function firmware_map_add() and firmware_map_add_early()
    that should be called from architecture code (E820/EFI, for
    example) to add the contents to the interface.

If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does
nothing without cluttering the architecture-specific code with #ifdef's.

The purpose of the new interface is kexec: While /proc/iomem represents
the *used* memory map (e.g. modified via kernel parameters like 'memmap'
and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory
map provided via the firmware. So kexec can:

 - use the original memory map for rebooting,
 - use the /proc/iomem for setting up the ELF core headers for kdump
   case that should only represent the memory of the system.

The patch has been tested on i386 and x86_64.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 17:55:41 +02:00
Yinghai Lu
6247943d8a x86: remove acpi_srat config v2
use ACPI_NUMA directly

and move srat_32.c to mm/

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:49:08 +02:00
Yinghai Lu
698839fe04 x86: remove have_arch_parse_srat -v2
we already have the same srat handling interface for 32bit.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 15:49:01 +02:00
Ingo Molnar
a29d1cfe9e printk: export console_drivers
this symbol is needed by drivers/video/xen-fbfront.ko.

[ cherry-picked from tip/core/printk ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 14:11:27 +02:00
Jeremy Fitzhardinge
5a654ba7a8 x86/cpa: use an undefined PTE bit for testing CPA
Rather than using _PAGE_GLOBAL - which not all CPUs support - to test
CPA, use one of the reserved-for-software-use PTE flags instead.  This
allows CPA testing to work on CPUs which don't support PGD.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:30 +02:00
Jeremy Fitzhardinge
ef5e94af16 x86_32: remove __PAGE_KERNEL(_EXEC)
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Older x86-32 processors do not support global mappings (PGD), so must
only use it if the processor supports it.

The _PAGE_KERNEL* flags always have _PAGE_KERNEL set, since logically
we always want it set.

This is OK even on processors which do not support PGD, since all
_PAGE flags are masked with __supported_pte_mask before being turned
into a real in-pagetable pte.  On 32-bit systems, __supported_pte_mask
is initialized to not contain _PAGE_GLOBAL, and it is then added if
the CPU is found to support it.

The x86-32 code used to use __PAGE_KERNEL/__PAGE_KERNEL_EXEC for this
purpose, but they're now redundant and can be removed.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:29 +02:00
Jeremy Fitzhardinge
8490638cf0 x86: always set _PAGE_GLOBAL in _PAGE_KERNEL* flags
Consistently set _PAGE_GLOBAL in _PAGE_KERNEL flags.  This makes 32-
and 64-bit code consistent, and removes some special cases where
__PAGE_KERNEL* did not have _PAGE_GLOBAL set, causing confusion as a
result of the inconsistencies.

This patch only affects x86-64, which generally always supports PGD.
The x86-32 patch is next.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:28 +02:00
Jeremy Fitzhardinge
574977a2ed x86_64/setup: unconditionally populate the pgd
When allocating a new pud, unconditionally populate the pgd (why did
we bother to create a new pud if we weren't going to populate it?).

This will only happen if the pgd slot was empty, since any existing
pud will be reused.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:27 +02:00
Ingo Molnar
aea5f9f89b x86: fix "x86: let setup_arch call init_apic_mappings for 32bit"
add back this line lost from trap_init():

        set_trap_gate(0,  &divide_error);

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:27 +02:00
Ingo Molnar
4a7017370a x86: move prefill_possible_map calling early, fix
fix:

arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `prefill_possible_map'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:25 +02:00
Yinghai Lu
329513a35d x86: move prefill_possible_map calling early
call it right after we are done with MADT/mptable handling, instead of
doing that in setup_per_cpu_areas() later on...

this way for_possible_cpu() can be used early.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:24 +02:00
Yinghai Lu
5f4765f96e x86: move init_cpu_to_node after get_smp_config
when acpi=off, cpu_to_apicid is ready after get_smp_config
so need to move init_cpu_to_node after it.

otherwise, we will get wrong cpu->node mapping, and it will rely on
amd_detect_cmp() to correct it - but that is too late as
setup_per_cpu_data is already called before that so  we will get
per_cpu_data on the wrong node.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:23 +02:00
Yinghai Lu
cb95a13a8a x86: merge zones_sizes_init for numa and non numa on 32-bit
move out e820_register_active_regions from non numa zones_sizes_init()
and remove numa version zones_sizes_init().

and let 32 bit call remove_all_active_ranges() in setup_arch() directly
like 64-bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:22 +02:00
Yinghai Lu
d9a81b4411 x86: do not printout if we do not find setup_data
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:22 +02:00
Yinghai Lu
4fcc545a74 x86: make early_res_to_bootmem print out less 80 width chars
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:20 +02:00
Yinghai Lu
dc8e8120ad x86: change copy_e820_map to append_e820_map
so it has a more meaningful name.
also change it to static.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:19 +02:00
Bernhard Walle
068b453834 x86: fix documentation bug about relocatability
This patch fixes a small bug in documentation: x86_64 also has now
the ability to build a relocatable kernel.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: kexec@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:18 +02:00
Bernhard Walle
32105f7fd8 x86: find offset for crashkernel reservation automatically
This patch removes the need of the crashkernel=...@offset parameter to define
a fixed offset for crashkernel reservation. That feature can be used together
with a relocatable kernel where the kexec-tools relocate the kernel and
get the actual offset from /proc/iomem.

The use case is a kernel where the .text+.data+.bss is after 16M physical
memory (debug kernel with lockdep on x86_64 can cause that) which caused a
major pain in autoconfiguration in our distribution.

Also, that patch unifies crashdump architectures a bit since IA64 has
that semantics from the very beginning of the kdump port.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Cc: kexec@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:18 +02:00
Alok Kataria
fd6493e166 x86: cleanup e820_setup_gap(), v2
e820_search_gap also take a end_addr parameter to limit search from
start_addr to end_addr.

Signed-off-by: AloK N Kataria <akataria@vmware.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:17 +02:00
Mike Travis
6a2f47ca27 x86: add check for node passed to node_to_cpumask, v3
* When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to
    node_to_cpumask and node_to_cpumask_ptr should be validated.
    If invalid, then a dump_stack is performed and a zero cpumask
    is returned.

v2: Slightly different version to remove a compiler warning.
v3: Redone to reflect moving setup.c -> setup_percpu.c

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:16 +02:00
Jeremy Fitzhardinge
cd5dce2fb0 x86: fix CPA self-test for "x86/paravirt: groundwork for 64-bit Xen support"
Ingo Molnar wrote:
> -tip auto-testing found pagetable corruption (CPA self-test failure):
>
> [   32.956015] CPA self-test:
> [   32.958822]  4k 2048 large 508 gb 0 x 2556[ffff880000000000-ffff88003fe00000] miss 0
> [   32.964000] CPA ffff88001d54e000: bad pte 1d4000e3
> [   32.968000] CPA ffff88001d54e000: unexpected level 2
> [   32.972000] CPA ffff880022c5d000: bad pte 22c000e3
> [   32.976000] CPA ffff880022c5d000: unexpected level 2
> [   32.980000] CPA ffff8800200ce000: bad pte 200000e3
> [   32.984000] CPA ffff8800200ce000: unexpected level 2
> [   32.988000] CPA ffff8800210f0000: bad pte 210000e3
>
> config and full log can be found at:
>
>  http://redhat.com/~mingo/misc/config-Mon_Jun_30_11_11_51_CEST_2008.bad
>  http://redhat.com/~mingo/misc/log-Mon_Jun_30_11_11_51_CEST_2008.bad

Phew.  OK, I've worked this out.  Short version is that's it's a false
alarm, and there was no real failure here.  Long version:

    * I changed the code to create the physical mapping pagetables to
      reuse any existing mapping rather than replace it.   Specifically,
      reusing an pud pointed to by the pgd caused this symptom to appear.
    * The specific PUD being reused is the one created statically in
      head_64.S, which creates an initial 1GB mapping.
    * That mapping doesn't have _PAGE_GLOBAL set on it, due to the
      inconsistency between __PAGE_* and PAGE_*.
    * The CPA test attempts to clear _PAGE_GLOBAL, and then checks to
      see that the resulting range is 1) shattered into 4k pages, and 2)
      has no _PAGE_GLOBAL.
    * However, since it didn't have _PAGE_GLOBAL on that range to start
      with, change_page_attr_clear() had nothing to do, and didn't
      bother shattering the range,
    * resulting in the reported messages

The simple fix is to set _PAGE_GLOBAL in level2_ident_pgt.

An additional fix to make CPA testing more robust by using some other
pagetable bit (one of the unused available-to-software ones).  This
would solve spurious CPA test warnings under Xen which uses _PAGE_GLOBAL
for its own purposes (ie, not under guest control).

Also, we should revisit the use of _PAGE_GLOBAL in asm-x86/pgtable.h,
and use it consistently, and drop MAKE_GLOBAL.  The first time I
proposed it it caused breakages in the very early CPA code; with luck
that's all fixed now.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:15 +02:00
Yinghai Lu
996cf4438f x86: don't reallocate pgt for node0
kva ram already mapped right after away, so don't need to get that for low ram.
avoid wasting one copy of pgdat.

also add node id in early_res name in case we get it from find_e820_area.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:15 +02:00
Yinghai Lu
28bb223795 x86: move reserve_setup_data to setup.c
Ying Huang would like setup_data to be reserved, but not included in the
no save range.

Here we try to modify the e820 table to reserve that range early.
also add that in early_res in case bootloader messes up with the ramdisk.

other solution would be
1. add early_res_to_highmem...
2. early_res_to_e820...
but they could reserve another type memory wrongly, if early_res has some
resource reserved early, and not needed later, but it is not removed from
early_res in time. Like the RAMDISK (already handled).

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: andi@firstfloor.org
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:14 +02:00
Jeremy Fitzhardinge
102d0a4b56 x86, paravirt, 64-bit: fix compile errors with IA32_EMULATION off
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:13 +02:00
Ingo Molnar
3ae960a598 - x86: move early_ioremap prototypes to io.h
now that the early-ioremap code is unified, move the prototypes too from
io_32.h to io.h.

this fixes:

arch/x86/kernel/setup.c:531: error: implicit declaration of function ‘early_ioremap_init'

on 64-bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:12 +02:00
Jeremy Fitzhardinge
1a98fd14f4 x86: setup_arch() && early_ioremap_init()
Looks like the setup.c unification missed the early_ioremap init from
the early_ioremap unification.  Unconditionally call early_ioremap_init().

needed for "x86/paravirt: groundwork for 64-bit Xen support".

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:11 +02:00
Ingo Molnar
1bb3a02907 x86: nmi_watchdog - documentation fix - v2
typo fixes from Randy Dunlap and Alan Cox.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:10 +02:00
Cyrill Gorcunov
afda335dc3 x86: nmi_watchdog - documentation fix
nmi_watchdog is set to NMI_NONE by default (ie disabled) on _any_
mode so lets fix documentation too.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:09 +02:00
Yinghai Lu
914bebfad4 x86: use disable_apic in 32bit
change the enable_local_apic to static force_enable_local_apic for 32bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:08 +02:00
Yinghai Lu
a04ad82d0b x86: fix init_memory_mapping over boundary, v4
use PMD_SHIFT to calculate boundary also adjust size for pre-allocated
table size

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:07 +02:00
Yinghai Lu
b4df32f4ae x86: fix warning in e820_reserve_resources with 32bit
when 64bit resource is not enabled, we get:

arch/x86/kernel/e820.c: In function ‘e820_reserve_resources’:
arch/x86/kernel/e820.c:1217: warning: comparison is always false due to limited range of data type

because res->start/end is resource_t aka u32. it will overflow.

fix it with temp end of u64

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:07 +02:00
Yinghai Lu
7482b0e962 x86: fix init_memory_mapping over boundary v3
some ram-end boundary only has page alignment, instead of 2M alignment.

v2: make init_memory_mapping more solid: start could be any value other than 0
v3: fix NON PAE by handling left over in kernel_physical_mapping

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:06 +02:00
Jeremy Fitzhardinge
df366e9822 x86_64: fix non-paravirt compilation
Make sure SWAPGS and PARAVIRT_ADJUST_EXCEPTION_FRAME are properly
defined when CONFIG_PARAVIRT is off.

Fixes Ingo's build failure:
arch/x86/kernel/entry_64.S: Assembler messages:
arch/x86/kernel/entry_64.S:1201: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1205: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1209: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1213: Error: invalid character '_' in mnemonic

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:05 +02:00
Yinghai Lu
f3294a33e7 x86: let setup_arch call init_apic_mappings for 32bit
instead of calling it from trap_init()

also move init ioapic mapping out of apic_32.c

so 32 bit do same as 64 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:04 +02:00
Yinghai Lu
ab67715c72 x86: early res print out alignment v2
v2: fix print info to cont

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:03 +02:00
Jeremy Fitzhardinge
22b45144f6 x86/paravirt: groundwork for 64-bit Xen support, fix #2
Ingo Molnar wrote:
> that fixed the build but now we've got a boot crash with this config:
>
>  time.c: Detected 2010.304 MHz processor.
>  spurious 8259A interrupt: IRQ7.
>  BUG: unable to handle kernel NULL pointer dereference at  0000000000000000
>  IP: [<0000000000000000>]
>  PGD 0
>  Thread overran stack, or stack corrupted
>  Oops: 0010 [1] SMP
>  CPU 0
>

I don't know if this will fix this bug, but it's definitely a bugfix.
It was trashing random pages by overwriting them with pagetables...

Don't trash a large pmd's data when mapping physical memory.
This is a bugfix for "x86_64: adjust mapping of physical pagetables
to work with Xen".

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:02 +02:00
Jeremy Fitzhardinge
457da70ec0 x86/paravirt: groundwork for 64-bit Xen support, fix
Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>
>>> It quickly broke the build in testing:
>>>
>>>  include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
>>>  include/asm/pgalloc.h:14: error: parameter name omitted
>>>  arch/x86/kernel/entry_64.S: In file included from
>>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function
>>> ‘paravirt_pgd_free':
>>>  include/asm/pgalloc.h:14: error: parameter name omitted
>>>
>>>
>> No, looks like my fault.  The non-PARAVIRT version of
>> paravirt_pgd_free() is:
>>
>> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {}
>>
>> but C doesn't like missing parameter names, even if unused.
>>
>> This should fix it:
>>
>
> that fixed the build but now we've got a boot crash with this config:
>
>  time.c: Detected 2010.304 MHz processor.
>  spurious 8259A interrupt: IRQ7.
>  BUG: unable to handle kernel NULL pointer dereference at  0000000000000000
>  IP: [<0000000000000000>]
>  PGD 0
>  Thread overran stack, or stack corrupted
>  Oops: 0010 [1] SMP
>  CPU 0
>
> with:
>
>   http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad
>

Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active
stack is the usermode stack.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:02 +02:00
Yinghai Lu
e7b3789524 x86: move fix mapping page table range early
do that in init_memory_mapping

also remove one init_ohci1394_dma_on_all_controllers

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:01 +02:00
Yinghai Lu
042623bbab x86: clean up ARCH_SETUP
asm-x86/paravirt.h already have protection with CONFIG_PARAVIRT inside

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:16:00 +02:00
Bernhard Walle
611dfd7819 x86: limit E820 map when a user-defined memory map is specified
This patch brings back limiting of the E820 map when a user-defined
E820 map is specified. While the behaviour of i386 (32 bit) was to limit
the E820 map (and /proc/iomem), the behaviour of x86-64 (64 bit) was not to
limit.

That patch limits the E820 map again for both x86 architectures.

Code was tested for compilation and booting on a 32 bit and 64 bit system.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: kexec@lists.infradead.org
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:15:59 +02:00
Jeremy Fitzhardinge
8207c2570a x86: fix pte allocation in "x86: introduce init_memory_mapping for 32bit"
The patch "x86: introduce init_memory_mapping for 32bit" does not allocate
enough space for PTEs if the CPU does not implement PSE.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:15:58 +02:00
Jeremy Fitzhardinge
9f9d489a3e x86/paravirt, 64-bit: make load_gs_index() a paravirt operation
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:15:58 +02:00
Jeremy Fitzhardinge
fab58420ac x86/paravirt, 64-bit: add adjust_exception_frame
64-bit Xen pushes a couple of extra words onto an exception frame.
Add a hook to deal with them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:15:57 +02:00