Commit Graph

3203 Commits

Author SHA1 Message Date
Gregory Haskins
73fe6aae84 sched: add RT-balance cpu-weight
Some RT tasks (particularly kthreads) are bound to one specific CPU.
It is fairly common for two or more bound tasks to get queued up at the
same time.  Consider, for instance, softirq_timer and softirq_sched.  A
timer goes off in an ISR which schedules softirq_thread to run at RT50.
Then the timer handler determines that it's time to smp-rebalance the
system so it schedules softirq_sched to run.  So we are in a situation
where we have two RT50 tasks queued, and the system will go into
rt-overload condition to request other CPUs for help.

This causes two problems in the current code:

1) If a high-priority bound task and a low-priority unbounded task queue
   up behind the running task, we will fail to ever relocate the unbounded
   task because we terminate the search on the first unmovable task.

2) We spend precious futile cycles in the fast-path trying to pull
   overloaded tasks over.  It is therefore optimial to strive to avoid the
   overhead all together if we can cheaply detect the condition before
   overload even occurs.

This patch tries to achieve this optimization by utilizing the hamming
weight of the task->cpus_allowed mask.  A weight of 1 indicates that
the task cannot be migrated.  We will then utilize this information to
skip non-migratable tasks and to eliminate uncessary rebalance attempts.

We introduce a per-rq variable to count the number of migratable tasks
that are currently running.  We only go into overload if we have more
than one rt task, AND at least one of them is migratable.

In addition, we introduce a per-task variable to cache the cpus_allowed
weight, since the hamming calculation is probably relatively expensive.
We only update the cached value when the mask is updated which should be
relatively infrequent, especially compared to scheduling frequency
in the fast path.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:07 +01:00
Steven Rostedt
c7a1e46aa9 sched: disable standard balancer for RT tasks
Since we now take an active approach to load balancing, we don't need to
balance RT tasks via the normal task balancer. In fact, this code was
found to pull RT tasks away from CPUS that the active movement performed,
resulting in large latencies.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:07 +01:00
Steven Rostedt
4642dafdf9 sched: push RT tasks from overloaded CPUs
This patch adds pushing of overloaded RT tasks from a runqueue that is
having tasks (most likely RT tasks) added to the run queue.

TODO: We don't cover the case of waking of new RT tasks (yet).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:07 +01:00
Steven Rostedt
f65eda4f78 sched: pull RT tasks from overloaded runqueues
This patch adds the algorithm to pull tasks from RT overloaded runqueues.

When a pull RT is initiated, all overloaded runqueues are examined for
a RT task that is higher in prio than the highest prio task queued on the
target runqueue. If another runqueue holds a RT task that is of higher
prio than the highest prio task on the target runqueue is found it is pulled
to the target runqueue.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:07 +01:00
Steven Rostedt
4fd29176b7 sched: add rt-overload tracking
This patch adds an RT overload accounting system. When a runqueue has
more than one RT task queued, it is marked as overloaded. That is that it
is a candidate to have RT tasks pulled from it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:06 +01:00
Steven Rostedt
e8fa136262 sched: add RT task pushing
This patch adds an algorithm to push extra RT tasks off a run queue to
other CPU runqueues.

When more than one RT task is added to a run queue, this algorithm takes
an assertive approach to push the RT tasks that are not running onto other
run queues that have lower priority.  The way this works is that the highest
RT task that is not running is looked at and we examine the runqueues on
the CPUS for that tasks affinity mask. We find the runqueue with the lowest
prio in the CPU affinity of the picked task, and if it is lower in prio than
the picked task, we push the task onto that CPU runqueue.

We continue pushing RT tasks off the current runqueue until we don't push any
more.  The algorithm stops when the next highest RT task can't preempt any
other processes on other CPUS.

TODO: The algorithm may stop when there are still RT tasks that can be
 migrated. Specifically, if the highest non running RT task CPU affinity
 is restricted to CPUs that are running higher priority tasks, there may
 be a lower priority task queued that has an affinity with a CPU that is
 running a lower priority task that it could be migrated to.  This
 patch set does not address this issue.

Note: checkpatch reveals two over 80 character instances. I'm not sure
 that breaking them up will help visually, so I left them as is.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:05 +01:00
Steven Rostedt
764a9d6fe4 sched: track highest prio task queued
This patch adds accounting to each runqueue to keep track of the
highest prio task queued on the run queue. We only care about
RT tasks, so if the run queue does not contain any active RT tasks
its priority will be considered MAX_RT_PRIO.

This information will be used for later patches.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:04 +01:00
Steven Rostedt
63489e45e2 sched: count # of queued RT tasks
This patch adds accounting to keep track of the number of RT tasks running
on a runqueue. This information will be used in later patches.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:03 +01:00
Ingo Molnar
82a1fcb902 softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasks
this patch extends the soft-lockup detector to automatically
detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are
printed the following way:

 ------------------>
 INFO: task prctl:3042 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message
 prctl         D fd5e3793     0  3042   2997
        f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286
        f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000
        f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b
 Call Trace:
  [<c04883a5>] schedule_timeout+0x6d/0x8b
  [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17
  [<c0133a76>] msleep+0x10/0x16
  [<c0138974>] sys_prctl+0x30/0x1e2
  [<c0104c52>] sysenter_past_esp+0x5f/0xa5
  =======================
 2 locks held by prctl/3042:
 #0:  (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a
 #1:  (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9
 <------------------

the current default timeout is 120 seconds. Such messages are printed
up to 10 times per bootup. If the system has crashed already then the
messages are not printed.

if lockdep is enabled then all held locks are printed as well.

this feature is a natural extension to the softlockup-detector (kernel
locked up without scheduling) and to the NMI watchdog (kernel locked up
with IRQs disabled).

[ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ]
[ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25 21:08:02 +01:00
Gautham R Shenoy
95402b3829 cpu-hotplug: replace per-subsystem mutexes with get_online_cpus()
This patch converts the known per-subsystem mutexes to get_online_cpus
put_online_cpus. It also eliminates the CPU_LOCK_ACQUIRE and
CPU_LOCK_RELEASE hotplug notification events.

Signed-off-by: Gautham  R Shenoy <ego@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:02 +01:00
Gautham R Shenoy
86ef5c9a8e cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use
get_online_cpus and put_online_cpus instead as it highlights the
refcount semantics in these operations.

The new API guarantees protection against the cpu-hotplug operation, but
it doesn't guarantee serialized access to any of the local data
structures. Hence the changes needs to be reviewed.

In case of pseries_add_processor/pseries_remove_processor, use
cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the
cpu_present_map there.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:02 +01:00
Gautham R Shenoy
d221938c04 cpu-hotplug: refcount based cpu hotplug
This patch implements a Refcount + Waitqueue based model for
cpu-hotplug.

Now, a thread which wants to prevent cpu-hotplug, will bump up a global
refcount and the thread which wants to perform a cpu-hotplug operation
will block till the global refcount goes to zero.

The readers, if any, during an ongoing cpu-hotplug operation are blocked
until the cpu-hotplug operation is over.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Paul Jackson <pj@sgi.com> [For !CONFIG_HOTPLUG_CPU ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:01 +01:00
Srivatsa Vaddagiri
6b2d770026 sched: group scheduler, fix fairness of cpu bandwidth allocation for task groups
The current load balancing scheme isn't good enough for precise
group fairness.

For example: on a 8-cpu system, I created 3 groups as under:

	a = 8 tasks (cpu.shares = 1024)
	b = 4 tasks (cpu.shares = 1024)
	c = 3 tasks (cpu.shares = 1024)

a, b and c are task groups that have equal weight. We would expect each
of the groups to receive 33.33% of cpu bandwidth under a fair scheduler.

This is what I get with the latest scheduler git tree:

Signed-off-by: Ingo Molnar <mingo@elte.hu>
--------------------------------------------------------------------------------
Col1  | Col2    | Col3  |  Col4
------|---------|-------|-------------------------------------------------------
a     | 277.676 | 57.8% | 54.1%  54.1%  54.1%  54.2%  56.7%  62.2%  62.8% 64.5%
b     | 116.108 | 24.2% | 47.4%  48.1%  48.7%  49.3%
c     |  86.326 | 18.0% | 47.5%  47.9%  48.5%
--------------------------------------------------------------------------------

Explanation of o/p:

Col1 -> Group name
Col2 -> Cumulative execution time (in seconds) received by all tasks of that
	group in a 60sec window across 8 cpus
Col3 -> CPU bandwidth received by the group in the 60sec window, expressed in
        percentage. Col3 data is derived as:
		Col3 = 100 * Col2 / (NR_CPUS * 60)
Col4 -> CPU bandwidth received by each individual task of the group.
		Col4 = 100 * cpu_time_recd_by_task / 60

[I can share the test case that produces a similar o/p if reqd]

The deviation from desired group fairness is as below:

	a = +24.47%
	b = -9.13%
	c = -15.33%

which is quite high.

After the patch below is applied, here are the results:

--------------------------------------------------------------------------------
Col1  | Col2    | Col3  |  Col4
------|---------|-------|-------------------------------------------------------
a     | 163.112 | 34.0% | 33.2%  33.4%  33.5%  33.5%  33.7%  34.4%  34.8% 35.3%
b     | 156.220 | 32.5% | 63.3%  64.5%  66.1%  66.5%
c     | 160.653 | 33.5% | 85.8%  90.6%  91.4%
--------------------------------------------------------------------------------

Deviation from desired group fairness is as below:

	a = +0.67%
	b = -0.83%
	c = +0.17%

which is far better IMO. Most of other runs have yielded a deviation within
+-2% at the most, which is good.

Why do we see bad (group) fairness with current scheuler?
=========================================================

Currently cpu's weight is just the summation of individual task weights.
This can yield incorrect results. For ex: consider three groups as below
on a 2-cpu system:

	CPU0	CPU1
---------------------------
	A (10)  B(5)
		C(5)
---------------------------

Group A has 10 tasks, all on CPU0, Group B and C have 5 tasks each all
of which are on CPU1. Each task has the same weight (NICE_0_LOAD =
1024).

The current scheme would yield a cpu weight of 10240 (10*1024) for each cpu and
the load balancer will think both CPUs are perfectly balanced and won't
move around any tasks. This, however, would yield this bandwidth:

	A = 50%
	B = 25%
	C = 25%

which is not the desired result.

What's changing in the patch?
=============================

	- How cpu weights are calculated when CONFIF_FAIR_GROUP_SCHED is
	  defined (see below)
	- API Change
		- Two tunables introduced in sysfs (under SCHED_DEBUG) to
		  control the frequency at which the load balance monitor
		  thread runs.

The basic change made in this patch is how cpu weight (rq->load.weight) is
calculated. Its now calculated as the summation of group weights on a cpu,
rather than summation of task weights. Weight exerted by a group on a
cpu is dependent on the shares allocated to it and also the number of
tasks the group has on that cpu compared to the total number of
(runnable) tasks the group has in the system.

Let,
	W(K,i)  = Weight of group K on cpu i
	T(K,i)  = Task load present in group K's cfs_rq on cpu i
	T(K)    = Total task load of group K across various cpus
	S(K) 	= Shares allocated to group K
	NRCPUS	= Number of online cpus in the scheduler domain to
	 	  which group K is assigned.

Then,
	W(K,i) = S(K) * NRCPUS * T(K,i) / T(K)

A load balance monitor thread is created at bootup, which periodically
runs and adjusts group's weight on each cpu. To avoid its overhead, two
min/max tunables are introduced (under SCHED_DEBUG) to control the rate
at which it runs.

Fixes from: Peter Zijlstra <a.p.zijlstra@chello.nl>

- don't start the load_balance_monitor when there is only a single cpu.
- rename the kthread because its currently longer than TASK_COMM_LEN

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:00 +01:00
Srivatsa Vaddagiri
a183561567 sched: introduce a mutex and corresponding API to serialize access to doms_curarray
doms_cur[] array represents various scheduling domains which are
mutually exclusive. Currently cpusets code can modify this array (by
calling partition_sched_domains()) as a result of user modifying
sched_load_balance flag for various cpusets.

This patch introduces a mutex and corresponding API (only when
CONFIG_FAIR_GROUP_SCHED is defined) which allows a reader to safely read
the doms_cur[] array w/o worrying abt concurrent modifications to the
array.

The fair group scheduler code (introduced in next patch of this series)
makes use of this mutex to walk thr' doms_cur[] array while rebalancing
shares of task groups across cpus.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:00 +01:00
Srivatsa Vaddagiri
58e2d4ca58 sched: group scheduling, change how cpu load is calculated
This patch changes how the cpu load exerted by fair_sched_class tasks
is calculated. Load exerted by fair_sched_class tasks on a cpu is now
a summation of the group weights, rather than summation of task weights.
Weight exerted by a group on a cpu is dependent on the shares allocated
to it.

This version of patch has a minor impact on code size, but should have
no runtime/functional impact for !CONFIG_FAIR_GROUP_SCHED.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:00 +01:00
Srivatsa Vaddagiri
ec2c507fe8 sched: group scheduling, minor fixes
Minor bug fixes for the group scheduler:

- Use a mutex to serialize add/remove of task groups and also when
  changing shares of a task group. Use the same mutex when printing
  cfs_rq debugging stats for various task groups.

- Use list_for_each_entry_rcu in for_each_leaf_cfs_rq macro (when
  walking task group list)

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:07:59 +01:00
Srivatsa Vaddagiri
93f992ccc0 sched: group scheduling code cleanup
Minor cleanups:

- Fix coding style
- remove obsolete comment

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:07:59 +01:00
Ingo Molnar
b842271fbb sched: remove printk_clock()
printk_clock() is obsolete - it has been replaced with cpu_clock().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:07:59 +01:00
Ingo Molnar
d713f51933 sched: fix CONFIG_PRINT_TIME's reliance on sched_clock()
Stefano Brivio reported weird printk timestamp behavior during
CPU frequency changes:

  http://bugzilla.kernel.org/show_bug.cgi?id=9475

fix CONFIG_PRINT_TIME's reliance on sched_clock() and use cpu_clock()
instead.

Reported-and-bisected-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:07:58 +01:00
Ingo Molnar
32a7600668 printk: make printk more robust by not allowing recursion
make printk more robust by allowing recursion only if there's a crash
going on. Also add recursion detection.

I've tested it with an artificially injected printk recursion - instead
of a lockup or spontaneous reboot or other crash, the output was a well
controlled:

[   41.057335] SysRq : <2>BUG: recent printk recursion!
[   41.057335] loglevel0-8 reBoot Crashdump show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks

also do all this printk-debug logic with irqs disabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Nick Piggin <npiggin@suse.de>
2008-01-25 21:07:58 +01:00
Linus Torvalds
7556afa0e0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] extint: Set initial irq type to low level
  [AVR32] extint: change set_irq_type() handling
  [AVR32] NMI debugging
  [AVR32] constify function pointer tables
  [AVR32] ATNGW100: Update defconfig
  [AVR32] ATSTK1002: Update defconfig
  [AVR32] Kconfig: Choose daughterboard instead of CPU
  [AVR32] Add support for ATSTK1003 and ATSTK1004
  [AVR32] Clean up external DAC setup code
  [AVR32] ATSTK1000: Move gpio-leds setup to setup.c
  [AVR32] Add support for AT32AP7001 and AT32AP7002
  [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg
  [AVR32] Oprofile support
  [AVR32] Include instrumentation menu
  Disable VGA text console for AVR32 architecture
  [AVR32] Enable debugging only when needed
  ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME
  [AVR32] Remove redundant try_to_freeze() call from do_signal()
  [AVR32] Drop GFP_COMP for DMA memory allocations
2008-01-25 08:40:02 -08:00
Haavard Skinnemoen
6ea6dd93c9 ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME
arch_ptrace_attach() is a hook that allows the architecture to do
book-keeping after a ptrace attach. This patch adds a call to this
hook when handling a PTRACE_TRACEME request as well.

Currently only one architecture, m32r, implements this hook. When
called, it initializes a number of debug trap slots in the ptraced
task's thread struct, and it looks to me like this is the right thing
to do after a PTRACE_TRACEME request as well, not only after
PTRACE_ATTACH. Please correct me if I'm wrong.

I want to use this hook on AVR32 to turn the debugging hardware on
when a process is actually being debugged and keep it off otherwise.
To be able to do this, I need to intercept PTRACE_TRACEME and
PTRACE_ATTACH, as well as PTRACE_DETACH and thread exit. The latter
two can be handled by existing hooks.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25 08:31:39 +01:00
Kay Sievers
af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
78a2d906b4 Kobject: convert remaining kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
7a6a41615b Modules: remove unneeded release function
Now that kobjects properly clean up their name structures, no matter if
they have a release function or not, we can drop this empty module
kobject release function too (it was needed prior to this because of the
way we handled static kobject names, we based the fact that if a release
function was present, then we could safely free the name string, now we
are more smart about things and only free names we have previously set.)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:39 -08:00
Greg Kroah-Hartman
ac3c8141f6 Kobject: convert kernel/module.c to use kobject_init/add_ng()
This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:38 -08:00
Kay Sievers
97c146ef07 sysfs: fix /sys/module/*/holders after sysfs logic change
Sysfs symlinks now require fully registered kobjects as a target,
otherwise the call to create a symlink will fail. Here we register
the kobject before we request the symlink in the holders directory.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tejun Heo <teheo@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:36 -08:00
Greg Kroah-Hartman
c63469a398 Driver core: move the driver specific module code into the driver core
The module driver specific code should belong in the driver core, not in
the kernel/ directory.  So move this code.  This is done in preparation
for some struct device_driver rework that should be confined to the
driver core code only.

This also lets us keep from exporting these functions, as no external
code should ever be calling it.

Thanks to Andrew Morton for the !CONFIG_MODULES fix.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:35 -08:00
Greg Kroah-Hartman
cf15126b3d Kobject: convert kernel/user.c to use kobject_init/add_ng()
This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:31 -08:00
Greg Kroah-Hartman
e43b9192c5 Kobject: convert kernel/params.c to use kobject_init/add_ng()
This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:31 -08:00
Greg Kroah-Hartman
d76e15fb20 driver core: make /sys/power a kobject
/sys/power should not be a kset, that's overkill.  This patch renames it
to power_kset and fixes up all usages of it in the tree.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:25 -08:00
Greg Kroah-Hartman
0ff21e4663 kobject: convert kernel_kset to be a kobject
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.

We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Kay Sievers
eb41d9465c fix struct user_info export's sysfs interaction
Clean up the use of ksets and kobjects. Kobjects are instances of
objects (like struct user_info), ksets are collections of objects of a
similar type (like the uids directory containing the user_info directories).
So, use kobjects for the user_info directories, and a kset for the "uids"
directory.

On object cleanup, the final kobject_put() was missing.

Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:18 -08:00
Kay Sievers
386f275f5d Driver Core: switch all dynamic ksets to kobj_sysfs_ops
Switch all dynamically created ksets, that export simple attributes,
to kobj_attribute from subsys_attribute. Struct subsys_attribute will
be removed.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mike Halcrow <mhalcrow@us.ibm.com>
Cc: Phillip Hellewell <phillip@hellewell.homeip.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:18 -08:00
Greg Kroah-Hartman
039a5dcd2f kset: convert /sys/power to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename power_subsys to power_kset to catch all users of the variable and
we properly export it so that people don't have to guess that it really
is present in the system.

The pseries code is wierd, why is it createing /sys/power if CONFIG_PM
is disabled?  Oh well, stupid big boxes ignoring config options...

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:16 -08:00
Greg Kroah-Hartman
7405c1e15e kset: convert /sys/module to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename module_subsys to module_kset to catch all users of the variable.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:16 -08:00
Greg Kroah-Hartman
bd35b93d80 kset: convert kernel_subsys to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename kernel_subsys to kernel_kset to catch all users of this symbol
with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman
4ff6abff83 kobject: get rid of kobject_add_dir
kobject_create_and_add is the same as kobject_add_dir, so drop
kobject_add_dir.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:11 -08:00
Greg Kroah-Hartman
3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Arjan van de Ven
fabe874a48 lockdep: fix kernel crash on module unload
Michael Wu noticed in his lkml post at

    http://marc.info/?l=linux-kernel&m=119396182726091&w=2

that certain wireless drivers ended up having their name in module
memory, which would then crash the kernel on module unload.

The patch he proposed was a bit clumsy in that it increased the size of
a lockdep entry significantly; the patch below tries another approach,
it checks, on module teardown, if the name of a class is in module space
and then zaps the class.  This is very similar to what we already do
with keys that are in module space.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-24 08:01:09 -08:00
James Bottomley
d4acd722b7 [SCSI] sysfs: add filter function to groups
This patch allows the various users of attribute_groups to selectively
allow the appearance of group attributes.  The primary consumer of
this will be the transport classes in which we currently have
elaborate attribute selection algorithms to do this same thing.

Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:18 -06:00
Linus Torvalds
b2214fca2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: group scheduler, set uid share fix
2008-01-22 09:18:45 -08:00
Randy Dunlap
00e10776ff rcu: fix section mismatch
rcu_online_cpu() should be __cpuinit instead of __devinit.

WARNING: vmlinux.o(.text+0x4b6d5): Section mismatch: reference to .init.text: (between 'rcu_cpu_notify' and 'wakeme_after_rcu')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-22 09:17:48 -08:00
Ingo Molnar
c61935fd0e sched: group scheduler, set uid share fix
setting cpu share to 1 causes hangs, as reported in:

    http://bugzilla.kernel.org/show_bug.cgi?id=9779

as the default share is 1024, the values of 0 and 1 can indeed
cause problems. Limit it to 2 or higher values.

These values can only be set by the root user - but still it
makes sense to protect against nonsensical values.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-22 11:24:58 +01:00
Randy Dunlap
48ccf3dac3 timer: fix section mismatch
The caller is __cpuinit.
Also, this code block and its caller are inside #ifdef CONFIG_HOTPLUG_CPU
blocks, so this code should reflect that config symbol's usage.

WARNING: vmlinux.o(.text+0x4252f): Section mismatch: reference to .init.text: (between 'timer_cpu_notify' and 'msleep')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21 19:39:41 -08:00
Randy Dunlap
0ec160dd48 hrtimer: fix section mismatch
Fix section mismatch in hrtimer.c:

WARNING: vmlinux.o(.text+0x50c61): Section mismatch: reference to .init.text: (between 'hrtimer_cpu_notify' and 'down_read_trylock')

Noticed by Johannes Berg and confirmed by Sam Ravnborg.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21 19:39:41 -08:00
Nigel Cunningham
784680336b Fix unbalanced helper_lock in kernel/kmod.c
call_usermodehelper_exec() has an exit path that can leave the
helper_lock() call at the top of the routine unbalanced.  The attached
patch fixes this issue.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-17 15:38:59 -08:00
Johannes Berg
eb13ba8738 lockdep: fix workqueue creation API lockdep interaction
Dave Young reported warnings from lockdep that the workqueue API
can sometimes try to register lockdep classes with the same key
but different names. This is not permitted in lockdep.

Unfortunately, I was unaware of that restriction when I wrote
the code to debug workqueue problems with lockdep and used the
workqueue name as the lockdep class name. This can obviously
lead to the problem if the workqueue name is dynamic.

This patch solves the problem by always using a constant name
for the workqueue's lockdep class, namely either the constant
name that was passed in or a string consisting of the variable
name.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2008-01-16 09:51:58 +01:00
Nick Piggin
5a26db5bd2 lockdep: fix internal double unlock during self-test
Lockdep, during self-test (when it was simulating double unlocks) was
sometimes unconditionally unlocking a spinlock when it had not been
locked. This won't work for ticket locks.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2008-01-16 09:51:58 +01:00
Rusty Russell
cb2a52052c modules: de-mutex more symbol lookup paths in the module code
Kyle McMartin reports sysrq_timer_list_show() can hit the module mutex
from hard interrupt context.  These paths don't need to though, since we
long ago changed all the module list manipulation to occur via
stop_machine().

Disabling preemption is enough.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:22 -08:00
Linus Torvalds
417009f64f Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  pnpacpi: print resource shortage message only once
  PM: ACPI and APM must not be enabled at the same time
  ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
  ACPICA: fix acpi_serialize hang regression
  ACPI : Not register gsi for PCI IDE controller in legacy mode
  ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case
  ACPI: Make sysfs interface in ACPI power optional.
  ACPI: EC: Enable boot EC before bus_scan
  increase PNP_MAX_PORT to 40 from 24
2008-01-13 09:58:22 -08:00
Roland McGrath
84427eaef1 remove task_ppid_nr_ns
task_ppid_nr_ns is called in three places.  One of these should never
have called it.  In the other two, using it broke the existing
semantics.  This was presumably accidental.  If the function had not
been there, it would have been much more obvious to the eye that those
patches were changing the behavior.  We don't need this function.

In task_state, the pid of the ptracer is not the ppid of the ptracer.

In do_task_stat, ppid is the tgid of the real_parent, not its pid.
I also moved the call outside of lock_task_sighand, since it doesn't
need it.

In sys_getppid, ppid is the tgid of the real_parent, not its pid.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-13 09:56:43 -08:00
Len Brown
02d5bccf8e Pull bugzilla-9194 into release branch 2008-01-11 12:27:13 -05:00
Len Brown
9f9adecd2d PM: ACPI and APM must not be enabled at the same time
ACPI and APM used "pm_active" to guarantee that
they would not be simultaneously active.

But pm_active was recently moved under CONFIG_PM_LEGACY,
so that without CONFIG_PM_LEGACY, pm_active became a NOP --
allowing ACPI and APM to both be simultaneously enabled.
This caused unpredictable results, including boot hangs.

Further, the code under CONFIG_PM_LEGACY is scheduled
for removal.

So replace pm_active with pm_flags.
pm_flags depends only on CONFIG_PM,
which is present for both CONFIG_APM and CONFIG_ACPI.

http://bugzilla.kernel.org/show_bug.cgi?id=9194

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2008-01-11 12:26:47 -05:00
Roland McGrath
fcfd50afb6 show_task: real_parent
The show_task function invoked by sysrq-t et al displays the
pid and parent's pid of each task.  It seems more useful to
show the actual process hierarchy here than who is using
ptrace on each process.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-09 08:03:58 -08:00
Thomas Gleixner
cdf71a10c7 futex: Prevent stale futex owner when interrupted/timeout
Roland Westrelin did a great analysis of a long standing thinko in the
return path of futex_lock_pi.

While we fixed the lock steal case long ago, which was easy to trigger,
we never had a test case which exposed this problem and stupidly never
thought about the reverse lock stealing scenario and the return to user
space with a stale state.

When a blocked tasks returns from rt_mutex_timed_locked without holding
the rt_mutex (due to a signal or timeout) and at the same time the task
holding the futex is releasing the futex and assigning the ownership of
the futex to the returning task, then it might happen that a third task
acquires the rt_mutex before the final rt_mutex_trylock() of the
returning task happens under the futex hash bucket lock. The returning
task returns to user space with ETIMEOUT or EINTR, but the user space
futex value is assigned to this task. The task which acquired the
rt_mutex fixes the user space futex value right after the hash bucket
lock has been released by the returning task, but for a short period of
time the user space value is wrong.

Detailed description is available at:

   https://bugzilla.redhat.com/show_bug.cgi?id=400541

The fix for this is the same as we do when the rt_mutex was acquired by
a higher priority task via lock stealing from the designated new owner.
In that case we already fix the user space value and the internal
pi_state up before we return. This mechanism can be used to fixup the
above corner case as well. When the returning task, which failed to
acquire the rt_mutex, notices that it is the designated owner of the
futex, then it fixes up the stale user space value and the pi_state,
before returning to user space. This happens with the futex hash bucket
lock held, so the task which acquired the rt_mutex is guaranteed to be
blocked on the hash bucket lock. We can access the rt_mutex owner, which
gives us the pid of the new owner, safely here as the owner is not able
to modify (release) it while waiting on the hash bucket lock.

Rename the "curr" argument of fixup_pi_state_owner() to "newowner" to
avoid confusion with current and add the check for the stale state into
the failure path of rt_mutex_trylock() in the return path of
unlock_futex_pi(). If the situation is detected use
fixup_pi_state_owner() to assign everything to the owner of the
rt_mutex.

Pointed-out-and-tested-by: Roland Westrelin <roland.westrelin@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08 16:21:39 -08:00
Ken'ichi Ohmichi
83a08e7c6e vmcoreinfo: add the array length of "free_list" for filtering free pages
This patch adds the array length of "free_area.free_list" to the vmcoreinfo
data so that makedumpfile (dump filtering command) can exclude all free pages
in linux-2.6.24.

makedumpfile creates a small dumpfile by excluding unnecessary pages for the
analysis. To distinguish unnecessary pages, makedumpfile gets the vmcoreinfo
data which has the minimum debugging information only for dump filtering.

In 2.6.24-rc1 or later, the free_area.free_list is an array which has one list
for each migrate types instead of a single list. makedumpfile needs the array
length of "free_area.free_list" and the vmcoreinfo data should contain it.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Tested-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08 16:10:36 -08:00
Roland McGrath
b59f8197c5 acct: real_parent ppid
The ac_ppid field reported in process accounting records
should match what getppid() would have returned to that
process, regardless of whether a debugger is attached.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-07 14:55:37 -08:00
Linus Torvalds
39cd72de49 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: fix gcc warnings
2008-01-03 12:01:00 -08:00
Linus Torvalds
b8c9a18712 Fix kernel/ptrace.c compile problem (missing "may_attach()")
The previous commit missed one use of "may_attach()" that had been
renamed to __ptrace_may_attach().  Tssk, tssk, Al.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02 13:48:27 -08:00
Al Viro
831830b5a2 restrict reading from /proc/<pid>/maps to those who share ->mm or can ptrace pid
Contents of /proc/*/maps is sensitive and may become sensitive after
open() (e.g.  if target originally shares our ->mm and later does exec
on suid-root binary).

Check at read() (actually, ->start() of iterator) time that mm_struct
we'd grabbed and locked is
 - still the ->mm of target
 - equal to reader's ->mm or the target is ptracable by reader.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02 13:13:27 -08:00
Ingo Molnar
90b2628f1f sched: fix gcc warnings
Meelis Roos reported these warnings on sparc64:

  CC      kernel/sched.o
  In file included from kernel/sched.c:879:
  kernel/sched_debug.c: In function 'nsec_high':
  kernel/sched_debug.c:38: warning: comparison of distinct pointer types lacks a cast

the debug check in do_div() is over-eager here, because the long long
is always positive in these places. Mark this by casting them to
unsigned long long.

no change in code output:

   text    data     bss     dec     hex filename
  51471    6582     376   58429    e43d sched.o.before
  51471    6582     376   58429    e43d sched.o.after

  md5:
   7f7729c111f185bf3ccea4d542abc049  sched.o.before.asm
   7f7729c111f185bf3ccea4d542abc049  sched.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-30 17:24:35 +01:00
David S. Miller
fb445ee5f9 [SERIAL]: Fix section mismatches in Sun serial console drivers.
We're exporting an __init function, oops :-)

The core issue here is that add_preferred_console() is marked
as __init, this makes it impossible to invoke this thing from
a driver probe routine which is what the Sparc serial drivers
need to do.

There is no harm in dropping the __init marker.  This code will
actually work properly when invoked from a modular driver,
except that init will probably not pick up the console change
without some other support code.

Then we can drop the __init from sunserial_console_match()
and we're no longer exporting an __init function to modules.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-29 01:19:49 -08:00
Greg Kroah-Hartman
d172f4ef31 Modules: fix memory leak of module names
Due to the change in kobject name handling, the module kobject needs to
have a null release function to ensure that the name it previously set
will be properly cleaned up.

All of this wierdness goes away in 2.6.25 with the rework of the kobject
name and cleanup logic, but this is required for 2.6.24.

Thanks to Alexey Dobriyan for finding the problem, and to Kay Sievers
for pointing out the simple way to fix it after I tried many complex
ways.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-22 23:09:05 -08:00
Arjan van de Ven
2c3b20e91f debug: add end-of-oops marker
Right now it's nearly impossible for parsers that collect kernel crashes
from logs or emails (such as www.kerneloops.org) to detect the
end-of-oops condition. In addition, it's not currently possible to
detect whether or not 2 oopses that look alike are actually the same
oops reported twice, or are truly two unique oopses.

This patch adds an end-of-oops marker, and makes the end marker include
a very simple 64-bit random ID to be able to detect duplicate reports.

Normally, this ID is calculated as a late_initcall() (in the hope that
at that time there is enough entropy to get a unique enough ID); however
for early oopses the oops_exit() function needs to generate the ID on
the fly.

We do this all at the _end_ of an oops printout, so this does not impact
our ability to get the most important portions of a crash out to the
console first.

[ Sidenote: the already existing oopses-since-bootup counter we print
  during crashes serves as the differentiator between multiple oopses
  that trigger during the same bootup. ]

Tested on 32-bit and 64-bit x86. Artificially injected very early
crashes as well, as expected they result in this constant ID after
multiple bootups:

  ---[ end trace ca143223eefdc828 ]---
  ---[ end trace ca143223eefdc828 ]---

because the random pools are still all zero. But it all still works
fine and causes no additional problems (which is the main goal of
instrumentation code).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-20 15:01:17 +01:00
Peter Zijlstra
67e2be0232 sched: rt: account the cpu time during the tick
Realtime tasks would not account their runtime during ticks. Which would lead
to:

        struct sched_param param = { .sched_priority = 10 };
        pthread_setschedparam(pthread_self(), SCHED_FIFO, &param);

	while (1) ;

Not showing up in top.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-12-20 15:01:17 +01:00
Linus Torvalds
3e3b3916a9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!"
  genirq: revert lazy irq disable for simple irqs
  x86: also define AT_VECTOR_SIZE_ARCH
  x86: kprobes bugfix
  x86: jprobe bugfix
  timer: kernel/timer.c section fixes
  genirq: add unlocked version of set_irq_handler()
  clockevents: fix reprogramming decision in oneshot broadcast
  oprofile: op_model_athlon.c support for AMD family 10h barcelona performance counters
2007-12-18 09:42:44 -08:00
Steven Rostedt
971e5b35fb genirq: revert lazy irq disable for simple irqs
In commit 76d2160147 lazy irq disabling
was implemented, and the simple irq handler had a masking set to it.

Remy Bohmer discovered that some devices in the ARM architecture
would trigger the mask, but never unmask it. His patch to do the
unmasking was questioned by Russell King about masking simple irqs
to begin with. Looking further, it was discovered that the problems
Remy was seeing was due to improper use of the simple handler by
devices, and he later submitted patches to fix those. But the issue
that was uncovered was that the simple handler should never mask.

This patch reverts the masking in the simple handler.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-18 18:05:58 +01:00
Adrian Bunk
b4be625852 timer: kernel/timer.c section fixes
This patch fixes the following section mismatches with CONFIG_HOTPLUG=n,
CONFIG_HOTPLUG_CPU=y:

...
WARNING: vmlinux.o(.text+0x41cd3): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq')
WARNING: vmlinux.o(.text+0x41d67): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq')
...

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-12-18 18:05:58 +01:00
Thomas Gleixner
cdc6f27d9e clockevents: fix reprogramming decision in oneshot broadcast
Resolve the following regression of a choppy, almost unusable laptop:

 http://lkml.org/lkml/2007/12/7/299
 http://bugzilla.kernel.org/show_bug.cgi?id=9525

A previous version of the code did the reprogramming of the broadcast
device in the return from idle code. This was removed, but the logic in
tick_handle_oneshot_broadcast() was kept the same.

When a broadcast interrupt happens we signal the expiry to all CPUs
which have an expired event. If none of the CPUs has an expired event,
which can happen in dyntick mode, then we reprogram the broadcast
device. We do not reprogram otherwise, but this is only correct if all
CPUs, which are in the idle broadcast state have been woken up.

The code ignores, that there might be pending not yet expired events on
other CPUs, which are in the idle broadcast state. So the delivery of
those events can be delayed for quite a time.

Change the tick_handle_oneshot_broadcast() function to check for CPUs,
which are in broadcast state and are not woken up by the current event,
and enforce the rearming of the broadcast device for those CPUs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 18:05:58 +01:00
Ingo Molnar
6cbf1c126c sched: do not hurt SCHED_BATCH on wakeup
measurements by Yanmin Zhang have shown that SCHED_BATCH tasks benefit
if they run the same place_entity() logic as SCHED_OTHER tasks - so
uniformize behavior in this area.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 15:21:13 +01:00
Ingo Molnar
2bacec8c31 sched: touch softlockup watchdog after idling
touch softlockup watchdog after idling.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 15:21:13 +01:00
Eric Dumazet
73c4efd2c8 sched: sysctl, proc_dointvec_minmax() expects int values for
min_sched_granularity_ns, max_sched_granularity_ns,
min_wakeup_granularity_ns and max_wakeup_granularity_ns are declared
"unsigned long".

This is incorrect since proc_dointvec_minmax() expects plain "int" guard
values.

This bug only triggers on big endian 64 bit arches.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 15:21:13 +01:00
Livio Soares
c7af77b584 sched: mark rwsem functions as __sched for wchan/profiling
This following commit

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fdf8cb0909b531f9ae8f9b9d7e4eb35ba3505f07

un-inlined a low-level rwsem function, but did not mark it as __sched.
The result is that it now shows up as thread wchan (which also affects
/proc/profile stats).  The following simple patch fixes this by properly
marking rwsem_down_failed_common() as a __sched function.

Also in this patch, which is up for discussion, marks down_read() and
down_write() proper as __sched.  For profiling, it is pretty much
useless to know that a semaphore is beig help - it is necessary to know
_which_ one.  By going up another frame on the stack, the information
becomes much more useful.

In summary, the below change to lib/rwsem.c should be applied; the
changes to kernel/rwsem.c could be applied if other kernel hackers agree
with my proposal that down_read()/down_write() in the profile is not
enough.

[ akpm@linux-foundation.org: build fix ]

Signed-off-by: Livio Soares <livio@eecg.toronto.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18 15:21:13 +01:00
Dmitry Adamushko
051a1d1afa sched: fix crash on ia64, introduce task_current()
Some services (e.g. sched_setscheduler(), rt_mutex_setprio() and
sched_move_task()) must handle a given task differently in case it's the
'rq->curr' task on its run-queue. The task_running() interface is not
suitable for determining such tasks for platforms with one of the
following options:

#define __ARCH_WANT_UNLOCKED_CTXSW
#define __ARCH_WANT_INTERRUPTS_ON_CTXSW

Due to the fact that it makes use of 'p->oncpu == 1' as a criterion but
such a task is not necessarily 'rq->curr'.

The detailed explanation is available here:
https://lists.linux-foundation.org/pipermail/containers/2007-December/009262.html

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
2007-12-18 15:21:13 +01:00
Eric W. Biederman
64396accc2 sysctl: fix ax25 checks
Fix:

sysctl table check failed: /net/ax25/ax0/ax25_default_mode .3.9.1.2 Unknown
sysctl binary path
Pid: 2936, comm: kissattach Not tainted 2.6.24-rc5 #1
 [<c012ca6a>] set_fail+0x3b/0x43
 [<c012ce7a>] sysctl_check_table+0x408/0x456
 [<c012ce8e>] sysctl_check_table+0x41c/0x456
 [<c012ce8e>] sysctl_check_table+0x41c/0x456
 ...

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Nishanth Aravamudan
368d2c6358 Revert "hugetlb: Add hugetlb_dynamic_pool sysctl"
This reverts commit 54f9f80d65 ("hugetlb:
Add hugetlb_dynamic_pool sysctl")

Given the new sysctl nr_overcommit_hugepages, the boolean dynamic pool
sysctl is not needed, as its semantics can be expressed by 0 in the
overcommit sysctl (no dynamic pool) and non-0 in the overcommit sysctl
(pool enabled).

(Needed in 2.6.24 since it reverts a post-2.6.23 userspace-visible change)

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Nishanth Aravamudan
d1c3fb1f8f hugetlb: introduce nr_overcommit_hugepages sysctl
hugetlb: introduce nr_overcommit_hugepages sysctl

While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I
became convinced that having a boolean sysctl was insufficient:

1) To support per-node control of hugepages, I have previously submitted
patches to add a sysfs attribute related to nr_hugepages. However, with
a boolean global value and per-mount quota enforcement constraining the
dynamic pool, adding corresponding control of the dynamic pool on a
per-node basis seems inconsistent to me.

2) Administration of the hugetlb dynamic pool with multiple hugetlbfs
mount points is, arguably, more arduous than it needs to be. Each quota
would need to be set separately, and the sum would need to be monitored.

To ease the administration, and to help make the way for per-node
control of the static & dynamic hugepage pool, I added a separate
sysctl, nr_overcommit_hugepages. This value serves as a high watermark
for the overall hugepage pool, while nr_hugepages serves as a low
watermark. The boolean sysctl can then be removed, as the condition

	nr_overcommit_hugepages > 0

indicates the same administrative setting as

	hugetlb_dynamic_pool == 1

Quotas still serve as local enforcement of the size of the pool on a
per-mount basis.

A few caveats:

1) There is a race whereby the global surplus huge page counter is
incremented before a hugepage has allocated. Another process could then
try grow the pool, and fail to convert a surplus huge page to a normal
huge page and instead allocate a fresh huge page. I believe this is
benign, as no memory is leaked (the actual pages are still tracked
correctly) and the counters won't go out of sync.

2) Shrinking the static pool while a surplus is in effect will allow the
number of surplus huge pages to exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.

Successfully tested on x86_64 with the current libhugetlbfs snapshot,
modified to use the new sysctl.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Linus Torvalds
2c5ea0f2d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  ACPI: move timer broadcast before busmaster disable
  clockevents: warn once when program_event() is called with negative expiry
  hrtimers: avoid overflow for large relative timeouts
2007-12-07 11:01:26 -08:00
Thomas Gleixner
167b1de3ee clockevents: warn once when program_event() is called with negative expiry
The hrtimer problem with large relative timeouts resulting in a
negative expiry time went unnoticed as there is no check in the
clockevents_program_event() code. Put a check there with a WARN_ONCE
to avoid such problems in the future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-07 19:16:17 +01:00
Thomas Gleixner
62f0f61e66 hrtimers: avoid overflow for large relative timeouts
Relative hrtimers with a large timeout value might end up as negative
timer values, when the current time is added in hrtimer_start().

This in turn is causing the clockevents_set_next() function to set an
huge timeout and sleep for quite a long time when we have a clock
source which is capable of long sleeps like HPET. With PIT this almost
goes unnoticed as the maximum delta is ~27ms. The non-hrt/nohz code
sorts this out in the next timer interrupt, so we never noticed that
problem which has been there since the first day of hrtimers.

This bug became more apparent in 2.6.24 which activates HPET on more
hardware.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-07 19:16:17 +01:00
Ingo Molnar
8ced5f69e4 sched: enable early use of sched_clock()
some platforms have sched_clock() implementations that cannot be called
very early during wakeup. If it's called it might hang or crash in hard
to debug ways. So only call update_rq_clock() [which calls sched_clock()]
if sched_init() has already been called. (rq->idle is NULL before the
scheduler is initialized.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-07 19:02:47 +01:00
Ingo Molnar
5f9fa8a62d lockdep: make cli/sti annotation warnings clearer
make cli/sti annotation warnings easier to interpret.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-12-07 19:02:47 +01:00
Linus Torvalds
3743d33edf Tiny clean-up of OPROFILE/KPROBES configuration
Make the Kconfig.instrumentation file a bit easier on the eyes, and use
the new ARCH_SUPPORTS_OPROFILE for x86[-64].

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-06 09:41:12 -08:00
Ralf Baechle
00a5825332 Fix oprofile configuration breakage
The cleanup 09cadedbdc broke the oprofile
configuration for MIPS by allowing oprofile support to be built for
kernel models where oprofile doesn't have a chance in hell to work.

Just a dependecy list on a number of architectures is - surprise - broken
and should as per past discussions probably in most considered to be
broken in most cases.  So I introduce a dependency for the oprofile
configuration on ARCH_SUPPORTS_OPROFILE.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-06 09:37:03 -08:00
Linus Torvalds
7e1fb765c6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  futex: correctly return -EFAULT not -EINVAL
  lockdep: in_range() fix
  lockdep: fix debug_show_all_locks()
  sched: style cleanups
  futex: fix for futex_wait signal stack corruption
2007-12-05 09:27:46 -08:00
Linus Torvalds
2cfae2739b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC]: Add missing of_node_put
  [SPARC64]: check for possible NULL pointer dereference
  [SPARC]: Add missing "space"
  [SPARC64]: Add missing "space"
  [SPARC64]: Add missing pci_dev_put
  [SYSCTL_CHECK]: Fix typo in KERN_SPARC_SCONS_PWROFF entry string.
  [SPARC64]: Missing mdesc_release() in ldc_init().
2007-12-05 09:25:53 -08:00
Pavel Emelyanov
f1dad166e8 Avoid potential NULL dereference in unregister_sysctl_table
register_sysctl_table() can return NULL sometimes, e.g.  when kmalloc()
returns NULL or when sysctl check fails.

I've also noticed, that many (most?) code in the kernel doesn't check for
the return value from register_sysctl_table() and later simply calls the
unregister_sysctl_table() with potentially NULL argument.

This is unlikely on a common kernel configuration, but in case we're
dealing with modules and/or fault-injection support, there's a slight
possibility of an OOPS.

Changing all the users to check for return code from the registering does
not look like a good solution - there are too many code doing this and
failure in sysctl tables registration is not a good reason to abort module
loading (in most of the cases).

So I think, that we can just have this check in unregister_sysctl_table
just to avoid accidental OOPS-es (actually, the unregister_sysctl_table()
did exactly this, before the start_unregistering() appeared).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
Eric W. Biederman
5cd17569fd fix clone(CLONE_NEWPID)
Currently we are complicating the code in copy_process, the clone ABI, and
if we fix the bugs sys_setsid itself, with an unnecessary open coded
version of sys_setsid.

So just simplify everything and don't special case the session and pgrp of
the initial process in a pid namespace.

Having this special case actually presents to user space the classic linux
startup conditions with session == pgrp == 0 for /sbin/init.

We already handle sending signals to processes in a child pid namespace.

We need to handle sending signals to processes in a parent pid namespace
for cases like SIGCHILD and SIGIO.

This makes nothing extra visible inside a pid namespace.  So this extra
special case appears to have no redeeming merits.

Further removing this special case increases the flexibility of how we can
use pid namespaces, by not requiring the initial process in a pid namespace
to be a daemon.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:18 -08:00
Thomas Gleixner
cde898fa80 futex: correctly return -EFAULT not -EINVAL
return -EFAULT not -EINVAL. Found by review.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-05 15:46:09 +01:00
Oleg Nesterov
54561783ee lockdep: in_range() fix
Torsten Kaiser wrote:

| static inline int in_range(const void *start, const void *addr, const void *end)
| {
|         return addr >= start && addr <= end;
| }
| This  will return true, if addr is in the range of start (including)
| to end (including).
|
| But debug_check_no_locks_freed() seems does:
| const void *mem_to = mem_from + mem_len
| -> mem_to is the last byte of the freed range, that fits in_range
| lock_from = (void *)hlock->instance;
| -> first byte of the lock
| lock_to = (void *)(hlock->instance + 1);
| -> first byte of the next lock, not last byte of the lock that is being checked!
|
| The test is:
| if (!in_range(mem_from, lock_from, mem_to) &&
|                                         !in_range(mem_from, lock_to, mem_to))
|                         continue;
| So it tests, if the first byte of the lock is in the range that is freed ->OK
| And if the first byte of the *next* lock is in the range that is freed
| -> Not OK.

We can also simplify in_range checks, we need only 2 comparisons, not 4.
If the lock is not in memory range, it should be either at the left of range
or at the right.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-12-05 15:46:09 +01:00
Ingo Molnar
856848737b lockdep: fix debug_show_all_locks()
fix the oops that can be seen in:

   http://bugzilla.kernel.org/attachment.cgi?id=13828&action=view

it is not safe to print the locks of running tasks.

(even with this fix we have a small race - but this is a debug
 function after all.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-12-05 15:46:09 +01:00
Ingo Molnar
41a2d6cfa3 sched: style cleanups
style cleanup of various changes that were done recently.

no code changed:

      text    data     bss     dec     hex filename
     23680    2542      28   26250    668a sched.o.before
     23680    2542      28   26250    668a sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-05 15:46:09 +01:00
Steven Rostedt
ce6bd420f4 futex: fix for futex_wait signal stack corruption
David Holmes found a bug in the -rt tree with respect to
pthread_cond_timedwait. After trying his test program on the latest git
from mainline, I found the bug was there too.  The bug he was seeing
that his test program showed, was that if one were to do a "Ctrl-Z" on a
process that was in the pthread_cond_timedwait, and then did a "bg" on
that process, it would return with a "-ETIMEDOUT" but early. That is,
the timer would go off early.

Looking into this, I found the source of the problem. And it is a rather
nasty bug at that.

Here's the relevant code from kernel/futex.c: (not in order in the file)

[...]
smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
                          struct timespec __user *utime, u32 __user *uaddr2,
                          u32 val3)
{
        struct timespec ts;
        ktime_t t, *tp = NULL;
        u32 val2 = 0;
        int cmd = op & FUTEX_CMD_MASK;

        if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) {
                if (copy_from_user(&ts, utime, sizeof(ts)) != 0)
                        return -EFAULT;
                if (!timespec_valid(&ts))
                        return -EINVAL;

                t = timespec_to_ktime(ts);
                if (cmd == FUTEX_WAIT)
                        t = ktime_add(ktime_get(), t);
                tp = &t;
        }
[...]
        return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}

[...]

long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
                u32 __user *uaddr2, u32 val2, u32 val3)
{
        int ret;
        int cmd = op & FUTEX_CMD_MASK;
        struct rw_semaphore *fshared = NULL;

        if (!(op & FUTEX_PRIVATE_FLAG))
                fshared = &current->mm->mmap_sem;

        switch (cmd) {
        case FUTEX_WAIT:
                ret = futex_wait(uaddr, fshared, val, timeout);

[...]

static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared,
                      u32 val, ktime_t *abs_time)
{
[...]
               struct restart_block *restart;
                restart = &current_thread_info()->restart_block;
                restart->fn = futex_wait_restart;
                restart->arg0 = (unsigned long)uaddr;
                restart->arg1 = (unsigned long)val;
                restart->arg2 = (unsigned long)abs_time;
                restart->arg3 = 0;
                if (fshared)
                        restart->arg3 |= ARG3_SHARED;
                return -ERESTART_RESTARTBLOCK;
[...]

static long futex_wait_restart(struct restart_block *restart)
{
        u32 __user *uaddr = (u32 __user *)restart->arg0;
        u32 val = (u32)restart->arg1;
        ktime_t *abs_time = (ktime_t *)restart->arg2;
        struct rw_semaphore *fshared = NULL;

        restart->fn = do_no_restart_syscall;
        if (restart->arg3 & ARG3_SHARED)
                fshared = &current->mm->mmap_sem;
        return (long)futex_wait(uaddr, fshared, val, abs_time);
}

So when the futex_wait is interrupt by a signal we break out of the
hrtimer code and set up or return from signal. This code does not return
back to userspace, so we set up a RESTARTBLOCK.  The bug here is that we
save the "abs_time" which is a pointer to the stack variable "ktime_t t"
from sys_futex.

This returns and unwinds the stack before we get to call our signal. On
return from the signal we go to futex_wait_restart, where we update all
the parameters for futex_wait and call it. But here we have a problem
where abs_time is no longer valid.

I verified this with print statements, and sure enough, what abs_time
was set to ends up being garbage when we get to futex_wait_restart.

The solution I did to solve this (with input from Linus Torvalds)
was to add unions to the restart_block to allow system calls to
use the restart with specific parameters.  This way the futex code now
saves the time in a 64bit value in the restart block instead of storing
it on the stack.

Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64
in thread_info.h, when there's a #ifdef __KERNEL__ just below that.
Not sure what that is there for.  If this turns out to be a problem, I've
tested this with using "unsigned int" for u32 and "unsigned long long" for
u64 and it worked just the same. I'm using u32 and u64 just to be
consistent with what the futex code uses.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 15:46:09 +01:00
David S. Miller
874a5f87f5 [SYSCTL_CHECK]: Fix typo in KERN_SPARC_SCONS_PWROFF entry string.
Based upon a report by Mikael Pettersson.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-05 05:37:56 -08:00
Ingo Molnar
db292ca302 sched: default to more agressive yield for SCHED_BATCH tasks
do more agressive yield for SCHED_BATCH tuned tasks: they are all
about throughput anyway. This allows a gentler migration path for
any apps that relied on stronger yield.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-04 17:04:39 +01:00
Ingo Molnar
77034937dc sched: fix crash in sys_sched_rr_get_interval()
Luiz Fernando N. Capitulino reported that sched_rr_get_interval()
crashes for SCHED_OTHER tasks that are on an idle runqueue.

The fix is to return a 0 timeslice for tasks that are on an idle
runqueue. (and which are not running, obviously)

this also shrinks the code a bit:

   text    data     bss     dec     hex filename
  47903    3934     336   52173    cbcd sched.o.before
  47885    3934     336   52155    cbbb sched.o.after

Reported-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-04 17:04:39 +01:00
Linus Torvalds
ca6435f188 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: cpu accounting controller (V2)
2007-12-03 08:21:06 -08:00
Al Viro
b00296fb78 uml: add !UML dependencies
The previous commit ("uml: keep UML Kconfig in sync with x86") is not
enough, unfortunately.  If we go that way, we need to add dependencies
on !UML for several options.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-03 08:13:17 -08:00
Srivatsa Vaddagiri
d842de871c sched: cpu accounting controller (V2)
Commit cfb5285660 removed a useful feature for
us, which provided a cpu accounting resource controller.  This feature would be
useful if someone wants to group tasks only for accounting purpose and doesnt
really want to exercise any control over their cpu consumption.

The patch below reintroduces the feature. It is based on Paul Menage's
original patch (Commit 62d0df6406), with
these differences:

        - Removed load average information. I felt it needs more thought (esp
	  to deal with SMP and virtualized platforms) and can be added for
	  2.6.25 after more discussions.
        - Convert group cpu usage to be nanosecond accurate (as rest of the cfs
	  stats are) and invoke cpuacct_charge() from the respective scheduler
	  classes
	- Make accounting scalable on SMP systems by splitting the usage
	  counter to be per-cpu
	- Move the code from kernel/cpu_acct.c to kernel/sched.c (since the
	  code is not big enough to warrant a new file and also this rightly
	  needs to live inside the scheduler. Also things like accessing
	  rq->lock while reading cpu usage becomes easier if the code lived in
	  kernel/sched.c)

The patch also modifies the cpu controller not to provide the same accounting
information.

Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>

 Tested the patches on top of 2.6.24-rc3. The patches work fine. Ran
 some simple tests like cpuspin (spin on the cpu), ran several tasks in
 the same group and timed them. Compared their time stamps with
 cpuacct.usage.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-02 20:04:49 +01:00
Scott James Remnant
e6ceb32aa2 wait_task_stopped(): pass correct exit_code to wait_noreap_copyout()
In wait_task_stopped() exit_code already contains the right value for the
si_status member of siginfo, and this is simply set in the non WNOWAIT
case.

If you call waitid() with a stopped or traced process, you'll get the signal
in siginfo.si_status as expected -- however if you call waitid(WNOWAIT) at the
same time, you'll get the signal << 8 | 0x7f

Pass it unchanged to wait_noreap_copyout(); we would only need to shift it
and add 0x7f if we were returning it in the user status field and that
isn't used for any function that permits WNOWAIT.

Signed-off-by: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:55 -08:00
David Howells
9e6c1e6333 FRV: fix the extern declaration of kallsyms_num_syms
Fix the extern declaration of kallsyms_num_syms to indicate that the symbol
does not reside in the small-data storage space, and so may not be accessed
relative to the small data base register.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:54 -08:00
Pavel Emelyanov
32df81cbd5 Isolate the UTS namespace's domainname and hostname back
Commit 7d69a1f4a7 ("remove CONFIG_UTS_NS
and CONFIG_IPC_NS") by Cedric Le Goater accidentally removed the code
that prevented the uts->hostname and uts->domainname values from being
overwritten from another namespace.

In other words, setting hostname/domainname via sysfs (echo xxx >
/proc/sys/kernel/(host|domain)name) cased the new value to be set in
init UTS namespace only.

Return the isolation back.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Cedric Le Goater <clg@fr.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:53 -08:00
Oleg Nesterov
c895078355 wait_task_stopped(): don't use task_pid_nr_ns() lockless
wait_task_stopped(WNOWAIT) does task_pid_nr_ns() without tasklist/rcu lock,
we can read an already freed memory.  Use the cached pid_t value.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Looks-good-to: Roland McGrath <roland@redhat.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:52 -08:00
Ingo Molnar
f95e0d1c2a sched: clean up kernel/sched_stat.h
clean up kernel/sched_stat.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-28 15:52:56 +01:00
Ingo Molnar
c1a89740da sched: clean up overlong line in kernel/sched_debug.c
clean up overlong line in kernel/sched_debug.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-28 15:52:56 +01:00
Ingo Molnar
deaf2227dd sched: clean up, move __sched_text_start/end to sched.h
move __sched_text_start/end to sched.h. No code changed:

   text    data     bss     dec     hex filename
  26582    2310      28   28920    70f8 sched.o.before
  26582    2310      28   28920    70f8 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-28 15:52:56 +01:00
Ingo Molnar
9a4e715914 sched: clean up sd_alloc_ctl_cpu_table() definition
clean up sd_alloc_ctl_cpu_table() definition.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-28 15:52:56 +01:00
Thomas Gleixner
d393820446 softlockup: fix false positives on CONFIG_NOHZ
David Miller reported soft lockup false-positives that trigger
on NOHZ due to CPUs idling for more than 10 seconds.

The solution is touch the softlockup watchdog when we return from
idle. (by definition we are not 'locked up' when we were idle)

 http://bugzilla.kernel.org/show_bug.cgi?id=9409

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-28 15:52:56 +01:00
Linus Torvalds
8c27eba549 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (41 commits)
  [XFRM]: Fix leak of expired xfrm_states
  [ATM]: [he] initialize lock and tasklet earlier
  [IPV4]: Remove bogus ifdef mess in arp_process
  [SKBUFF]: Free old skb properly in skb_morph
  [IPV4]: Fix memory leak in inet_hashtables.h when NUMA is on
  [IPSEC]: Temporarily remove locks around copying of non-atomic fields
  [TCP] MTUprobe: Cleanup send queue check (no need to loop)
  [TCP]: MTUprobe: receiver window & data available checks fixed
  [MAINTAINERS]: tlan list is subscribers-only
  [SUNRPC]: Remove SPIN_LOCK_UNLOCKED
  [SUNRPC]: Make xprtsock.c:xs_setup_{udp,tcp}() static
  [PFKEY]: Sending an SADB_GET responds with an SADB_GET
  [IRDA]: Compilation for CONFIG_INET=n case
  [IPVS]: Fix compiler warning about unused register_ip_vs_protocol
  [ARP]: Fix arp reply when sender ip 0
  [IPV6] TCPMD5: Fix deleting key operation.
  [IPV6] TCPMD5: Check return value of tcp_alloc_md5sig_pool().
  [IPV4] TCPMD5: Use memmove() instead of memcpy() because we have overlaps.
  [IPV4] TCPMD5: Omit redundant NULL check for kfree() argument.
  ieee80211: Stop net_ratelimit/IEEE80211_DEBUG_DROP log pollution
  ...
2007-11-26 20:09:07 -08:00
Linus Torvalds
0685ab4fb8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: bump version of kernel/sched_debug.c
  sched: fix minimum granularity tunings
  sched: fix RLIMIT_CPU comment
  sched: fix kernel/acct.c comment
  sched: fix prev_stime calculation
  sched: don't forget to unlock uids_mutex on error paths
2007-11-26 19:42:08 -08:00
Linus Torvalds
ff1ea52fa3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: fix APIC related bootup crash on Athlon XP CPUs
  time: add ADJ_OFFSET_SS_READ
  x86: export the symbol empty_zero_page on the 32-bit x86 architecture
  x86: fix kprobes_64.c inlining borkage
  pci: use pci=bfsort for HP DL385 G2, DL585 G2
  x86: correctly set UTS_MACHINE for "make ARCH=x86"
  lockdep: annotate do_debug() trap handler
  x86: turn off iommu merge by default
  x86: fix ACPI compile for LOCAL_APIC=n
  x86: printk kernel version in WARN_ON and other dump_stack users
  ACPI: Set max_cstate to 1 for early Opterons.
  x86: fix NMI watchdog & 'stopped time' problem
2007-11-26 19:41:28 -08:00
Linus Torvalds
f4d53cedce Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix net driver loop case where we fail to restart
  module: fix and elaborate comments
  virtio: fix module/device unloading
  lguest: Fix uninitialized members in example launcher
2007-11-26 19:17:19 -08:00
Ingo Molnar
f7b9329e55 sched: bump version of kernel/sched_debug.c
bump version of kernel/sched_debug.c and remove CFS version
information from it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26 21:21:49 +01:00
Zou Nan hai
722aab0c3b sched: fix minimum granularity tunings
increase the default minimum granularity some more - this gives us
more performance in aim7 benchmarks.

also correct some comments: we scale with ilog(ncpus) + 1.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26 21:21:49 +01:00
Ingo Molnar
bcbe4a0766 sched: fix kernel/acct.c comment
fix kernel/acct.c comment.

noticed by Lin Tan. Comment suggested by Olaf Kirch.

also see:

  http://bugzilla.kernel.org/show_bug.cgi?id=8220

Reported-by: tammy000@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26 21:21:49 +01:00
Pavel Emelyanov
5e8869bb69 sched: don't forget to unlock uids_mutex on error paths
The commit

 commit 5cb350baf5
 Author: Dhaval Giani <dhaval@linux.vnet.ibm.com>
 Date:   Mon Oct 15 17:00:14 2007 +0200

    sched: group scheduling, sysfs tunables

introduced the uids_mutex and the helpers to lock/unlock it.
Unfortunately, the error paths of alloc_uid() were not patched
to unlock it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26 21:21:49 +01:00
John Stultz
52bfb36050 time: add ADJ_OFFSET_SS_READ
Michael Kerrisk reported that a long standing bug in the adjtimex()
system call causes glibc's adjtime(3) function to deliver the wrong
results if 'delta' is NULL.

add the ADJ_OFFSET_SS_READ API detail, which will be used by glibc
to fix this API compatibility bug.

Also see: http://bugzilla.kernel.org/show_bug.cgi?id=6761

[ mingo@elte.hu: added patch description and made it backwards compatible ]

NOTE: the new flag is defined 0xa001 so that it returns -EINVAL on
older kernels - this way glibc can use it safely. Suggested by Ulrich
Drepper.

Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26 20:42:19 +01:00
Heiko Carstens
37e3a6ac5a [S390] appldata: remove unused binary sysctls.
Remove binary sysctls that never worked due to missing strategy functions.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 11:13:45 +01:00
Heiko Carstens
43ebbf119a [S390] cmm: remove unused binary sysctls.
Remove binary sysctls that never worked due to missing strategy functions.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 11:13:45 +01:00
Simon Horman
9055fa1f3d [IPVS]: Move remaining sysctl handlers over to CTL_UNNUMBERED
Switch the remaining IPVS sysctl entries over to to use CTL_UNNUMBERED,
I stronly doubt that anyone is using the sys_sysctl interface to
these variables.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 21:51:13 -08:00
Simon Horman
9e103fa6bd [IPVS]: Fix sysctl warnings about missing strategy in schedulers
sysctl table check failed: /net/ipv4/vs/lblc_expiration .3.5.21.19 Missing strategy
[...]
sysctl table check failed: /net/ipv4/vs/lblcr_expiration .3.5.21.20 Missing strategy

Switch these entried over to use CTL_UNNUMBERED as clearly
the sys_syscal portion wasn't working.

This is along the same lines as Christian Borntraeger's patch that fixes
up entries with no stratergy in net/ipv4/ipvs/ip_vs_ctl.c

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 21:50:21 -08:00
Christian Borntraeger
611cd55b15 [IPVS]: Fix sysctl warnings about missing strategy
Running the latest git code I get the following messages during boot:
sysctl table check failed: /net/ipv4/vs/drop_entry .3.5.21.4 Missing strategy
[...]		  
sysctl table check failed: /net/ipv4/vs/drop_packet .3.5.21.5 Missing strategy
[...]
sysctl table check failed: /net/ipv4/vs/secure_tcp .3.5.21.6 Missing strategy
[...]
sysctl table check failed: /net/ipv4/vs/sync_threshold .3.5.21.24 Missing strategy

I removed the binary sysctl handler for those messages and also removed
the definitions in ip_vs.h. The alternative would be to implement a 
proper strategy handler, but syscall sysctl is deprecated.

There are other sysctl definitions that are commented out or work with 
the default sysctl_data strategy. I did not touch these. 

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 21:49:25 -08:00
Matti Linnanvuori
9a4b9708f1 module: fix and elaborate comments
Fix and elaborate comments.

Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-19 11:20:43 +11:00
David P. Reed
fa6a1a554b ntp: fix typo that makes sync_cmos_clock erratic
Fix a typo in ntp.c that has caused updating of the persistent (RTC)
clock when synced to NTP to behave erratically.

When debugging a freeze that arises on my AMD64 machines when I
run the ntpd service, I added a number of printk's to monitor the
sync_cmos_clock procedure.  I discovered that it was not syncing to
cmos RTC every 11 minutes as documented, but instead would keep trying
every second for hours at a time.  The reason turned out to be a typo
in sync_cmos_clock, where it attempts to ensure that
update_persistent_clock is called very close to 500 msec. after a 1
second boundary (required by the PC RTC's spec). That typo referred to
"xtime" in one spot, rather than "now", which is derived from "xtime"
but not equal to it.  This makes the test erratic, creating a
"coin-flip" that decides when update_persistent_clock is called - when
it is called, which is rarely, it may be at any time during the one
second period, rather than close to 500 msec, so the value written is
needlessly incorrect, too.

Signed-off-by: David P. Reed
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:01 +01:00
Ingo Molnar
4307d1e5ad x86: ignore the sys_getcpu() tcache parameter
dont use the vgetcpu tcache - it's causing problems with tasks
migrating, they'll see the old cache up to a jiffy after the
migration, further increasing the costs of the migration.

In the worst case they see a complete bogus information from
the tcache, when a sys_getcpu() call "invalidated" the cache
info by incrementing the jiffies _and_ the cpuid info in the
cache and the following vdso_getcpu() call happens after
vdso_jiffies have been incremented.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:00 +01:00
Linus Torvalds
3c72f526df Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: reorder SCHED_FEAT_ bits
  sched: make sched_nr_latency static
  sched: remove activate_idle_task()
  sched: fix __set_task_cpu() SMP race
  sched: fix SCHED_FIFO tasks & FAIR_GROUP_SCHED
  sched: fix accounting of interrupts during guest execution on s390
2007-11-15 12:14:52 -08:00
Ingo Molnar
9612633a21 sched: reorder SCHED_FEAT_ bits
reorder SCHED_FEAT_ bits so that the used ones come first. Makes
tuning instructions easier.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:40 +01:00
Adrian Bunk
518b22e990 sched: make sched_nr_latency static
sched_nr_latency can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:40 +01:00
Dmitry Adamushko
94bc9a7bd9 sched: remove activate_idle_task()
cpu_down() code is ok wrt sched_idle_next() placing the 'idle' task not
at the beginning of the queue.

So get rid of activate_idle_task() and make use of activate_task() instead.
It is the same as activate_task(), except for the update_rq_clock(rq) call
that is redundant.

Code size goes down:

   text    data     bss     dec     hex filename
  47853    3934     336   52123    cb9b sched.o.before
  47828    3934     336   52098    cb82 sched.o.after

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:40 +01:00
Dmitry Adamushko
ce96b5ac74 sched: fix __set_task_cpu() SMP race
Grant Wilson has reported rare SCHED_FAIR_USER crashes on his quad-core
system, which crashes can only be explained via runqueue corruption.

there is a narrow SMP race in __set_task_cpu(): after ->cpu is set up to
a new value, task_rq_lock(p, ...) can be successfuly executed on another
CPU. We must ensure that updates of per-task data have been completed by
this moment.

this bug has been hiding in the Linux scheduler for an eternity (we never
had any explicit barrier for task->cpu in set_task_cpu() - so the bug was
introduced in 2.5.1), but only became visible via set_task_cfs_rq() being
accidentally put after the task->cpu update. It also probably needs a
sufficiently out-of-order CPU to trigger.

Reported-by: Grant Wilson <grant.wilson@zen.co.uk>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:40 +01:00
Oleg Nesterov
dae51f5620 sched: fix SCHED_FIFO tasks & FAIR_GROUP_SCHED
Suppose that the SCHED_FIFO task does

	switch_uid(new_user);

Now, p->se.cfs_rq and p->se.parent both point into the old
user_struct->tg because sched_move_task() doesn't call set_task_cfs_rq()
for !fair_sched_class case.

Suppose that old user_struct/task_group is freed/reused, and the task
does

	sched_setscheduler(SCHED_NORMAL);

__setscheduler() sets fair_sched_class, but doesn't update
->se.cfs_rq/parent which point to the freed memory.

This means that check_preempt_wakeup() doing

		while (!is_same_group(se, pse)) {
			se = parent_entity(se);
			pse = parent_entity(pse);
		}

may OOPS in a similar way if rq->curr or p did something like above.

Perhaps we need something like the patch below, note that
__setscheduler() can't do set_task_cfs_rq().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:40 +01:00
Christian Borntraeger
9778385db3 sched: fix accounting of interrupts during guest execution on s390
Currently the scheduler checks for PF_VCPU to decide if this timeslice
has to be accounted as guest time. On s390 host interrupts are not
disabled during guest execution. This causes theses interrupts to be
accounted as guest time if CONFIG_VIRT_CPU_ACCOUNTING is set. Solution
is to check if an interrupt triggered account_system_time. As the tick
is timer interrupt based, we have to subtract hardirq_offset.

I tested the patch on s390 with CONFIG_VIRT_CPU_ACCOUNTING and on
x86_64. Seems to work.

CC: Avi Kivity <avi@qumranet.com>
CC: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-15 20:57:39 +01:00
Roland McGrath
a3474224e6 wait_task_stopped: Check p->exit_state instead of TASK_TRACED
The original meaning of the old test (p->state > TASK_STOPPED) was
"not dead", since it was before TASK_TRACED existed and before the
state/exit_state split.  It was a wrong correction in commit
14bf01bb05 to make this test for
TASK_TRACED instead.  It should have been changed when TASK_TRACED
was introducted and again when exit_state was introduced.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Kees Cook <kees@ubuntu.com>
Acked-by: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15 08:36:27 -08:00
Linus Torvalds
6f37ac793d Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rt_check_expire() can take a long time, add a cond_resched()
  [ISDN] sc: Really, really fix warning
  [ISDN] sc: Fix sndpkt to have the correct number of arguments
  [TCP] FRTO: Clear frto_highmark only after process_frto that uses it
  [NET]: Remove notifier block from chain when register_netdevice_notifier fails
  [FS_ENET]: Fix module build.
  [TCP]: Make sure write_queue_from does not begin with NULL ptr
  [TCP]: Fix size calculation in sk_stream_alloc_pskb
  [S2IO]: Fixed memory leak when MSI-X vector allocation fails
  [BONDING]: Fix resource use after free
  [SYSCTL]: Fix warning for token-ring from sysctl checker
  [NET] random : secure_tcp_sequence_number should not assume CONFIG_KTIME_SCALAR
  [IWLWIFI]: Not correctly dealing with hotunplug.
  [TCP] FRTO: Plug potential LOST-bit leak
  [TCP] FRTO: Limit snd_cwnd if TCP was application limited
  [E1000]: Fix schedule while atomic when called from mii-tool.
  [NETX]: Fix build failure added by 2.6.24 statistics cleanup.
  [EP93xx_ETH]: Build fix after 2.6.24 NAPI changes.
  [PKT_SCHED]: Check subqueue status before calling hard_start_xmit
2007-11-14 18:51:48 -08:00
Adrian Bunk
f96159840b kernel/taskstats.c: fix bogus nlmsg_free()
We'd better not nlmsg_free on a pointer containing an undefined value
(and without having anything allocated).

Spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:44 -08:00
Johannes Berg
60a0d23386 hibernate: fix lockdep report
Lockdep reports a circular locking dependency in the hibernate code
because
 - during system boot hibernate code (from an initcall) locks pm_mutex
   and then a sysfs buffer mutex via name_to_dev_t
 - during regular operation hibernate code locks pm_mutex under a
   sysfs buffer mutex because it's called from sysfs methods.

The deadlock can never happen because during initcall invocation nothing
can write to sysfs yet. This removes the lockdep report by marking the
initcall locking as being in a different class.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Russ Anderson
c642b8391c __do_IRQ does not check IRQ_DISABLED when IRQ_PER_CPU is set
In __do_IRQ(), the normal case is that IRQ_DISABLED is checked and if set
the handler (handle_IRQ_event()) is not called.

Earlier in __do_IRQ(), if IRQ_PER_CPU is set the code does not check
IRQ_DISABLED and calls the handler even though IRQ_DISABLED is set.  This
behavior seems unintentional.

One user encountering this behavior is the CPE handler (in
arch/ia64/kernel/mca.c).  When the CPE handler encounters too many CPEs
(such as a solid single bit error), it sets up a polling timer and disables
the CPE interrupt (to avoid excessive overhead logging the stream of single
bit errors).  disable_irq_nosync() is called which sets IRQ_DISABLED.  The
IRQ_PER_CPU flag was previously set (in ia64_mca_late_init()).  The net
result is the CPE handler gets called even though it is marked disabled.

If the behavior of not checking IRQ_DISABLED when IRQ_PER_CPU is set is
intentional, it would be worthy of a comment describing the intended
behavior.  disable_irq_nosync() does call chip->disable() to provide a
chipset specifiec interface for disabling the interrupt, which avoids this
issue when used.

Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Eric W. Biederman
57d5f66b86 pidns: Place under CONFIG_EXPERIMENTAL
This is my trivial patch to swat innumerable little bugs with a single
blow.

After some intensive review (my apologies for not having gotten to this
sooner) what we have looks like a good base to build on with the current
pid namespace code but it is not complete, and it is still much to simple
to find issues where the kernel does the wrong thing outside of the initial
pid namespace.

Until the dust settles and we are certain we have the ABI and the
implementation is as correct as humanly possible let's keep process ID
namespaces behind CONFIG_EXPERIMENTAL.

Allowing us the option of fixing any ABI or other bugs we find as long as
they are minor.

Allowing users of the kernel to avoid those bugs simply by ensuring their
kernel does not have support for multiple pid namespaces.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kir Kolyshkin <kir@swsoft.com>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Jan Kiszka
22800a2830 fix param_sysfs_builtin name length check
Commit faf8c714f4 caused a regression:
parameter names longer than MAX_KBUILD_MODNAME will now be rejected,
although we just need to keep the module name part that short.  This patch
restores the old behaviour while still avoiding that memchr is called with
its length parameter larger than the total string length.

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:42 -08:00
Mathieu Desnoyers
314de8a9e1 Linux Kernel Markers: fix marker mutex not taken upon module load
Upon module load, we must take the markers mutex.  It implies that the marker
mutex must be nested inside the module mutex.

It implies changing the nesting order : now the marker mutex nests inside the
module mutex.  Make the necessary changes to reverse the order in which the
mutexes are taken.

Includes some cleanup from Dave Hansen <haveblue@us.ibm.com>.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00
Andrew Morton
cfb5285660 revert "Task Control Groups: example CPU accounting subsystem"
Revert 62d0df6406.

This was originally intended as a simple initial example of how to create a
control groups subsystem; it wasn't intended for mainline, but I didn't make
this clear enough to Andrew.

The CFS cgroup subsystem now has better functionality for the per-cgroup usage
accounting (based directly on CFS stats) than the "usage" status file in this
patch, and the "load" status file is rather simplistic - although having a
per-cgroup load average report would be a useful feature, I don't believe this
patch actually provides it.  If it gets into the final 2.6.24 we'd probably
have to support this interface for ever.

Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00
Yasunori Goto
887c3cb188 Add IORESOUCE_BUSY flag for System RAM
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY.

But ia64 registers it as IORESOURCE_MEM only.
In addition, memory hotplug code registers new memory as IORESOURCE_MEM too.

This difference causes a failure of memory unplug of x86-64.  This patch
fixes it.

This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI
device.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Luck, Tony" <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Diego Calleja
cfe36bde59 Improve cgroup printks
When I boot with the 'quiet' parameter, I see on the screen:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[   39.036026] Initializing cgroup subsys cpuacct
[   39.036080] Initializing cgroup subsys debug
[   39.036118] Initializing cgroup subsys ns

This patch lowers the priority of those messages, adds a "cgroup: " prefix
to another couple of printks and kills the useless reference to the source
file.

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Tetsuo Handa
6fc48af82c sysctl: check length at deprecated_sysctl_warning
Original patch assumed args->nlen < CTL_MAXNAME, but it can be false.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Olof Johansson
ce1d18e006 [SYSCTL]: Fix warning for token-ring from sysctl checker
As seen when booting ppc64_defconfig:

sysctl table check failed: /net/token-ring .3.14 procname does not match binary path procname

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 21:15:24 -08:00
Roland McGrath
325d22df7b sigwait eats blocked default-ignore signals
While a signal is blocked, it must be posted even if its action is
SIG_IGN or is SIG_DFL with the default action to ignore.  This works
right most of the time, but is broken when a sigwait (rt_sigtimedwait)
is in progress.  This changes the early-discard check to respect
real_blocked.  ~blocked is the set to check for "should wake up now",
but ~(blocked|real_blocked) is the set for "blocked" semantics as
defined by POSIX.

This fixes bugzilla entry 9347, see

	http://bugzilla.kernel.org/show_bug.cgi?id=9347

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12 16:05:23 -08:00
David Miller
3c5fd9c77d [FUTEX] Fix address computation in compat code.
compat_exit_robust_list() computes a pointer to the
futex entry in userspace as follows:

	(void __user *)entry + futex_offset

'entry' is a 'struct robust_list __user *', and
'futex_offset' is a 'compat_long_t' (typically a 's32').

Things explode if the 32-bit sign bit is set in futex_offset.

Type promotion sign extends futex_offset to a 64-bit value before
adding it to 'entry'.

This triggered a problem on sparc64 running 32-bit applications which
would lock up a cpu looping forever in the fault handling for the
userspace load in handle_futex_death().

Compat userspace runs with address masking (wherein the cpu zeros out
the top 32-bits of every effective address given to a memory operation
instruction) so the sparc64 fault handler accounts for this by
zero'ing out the top 32-bits of the fault address too.

Since the kernel properly uses the compat_uptr interfaces, kernel side
accesses to compat userspace work too since they will only use
addresses with the top 32-bit clear.

Because of this compat futex layer bug we get into the following loop
when executing the get_user() load near the top of handle_futex_death():

1) load from address '0xfffffffff7f16bd8', FAULT
2) fault handler clears upper 32-bits, processes fault
   for address '0xf7f16bd8' which succeeds
3) goto #1

I want to thank Bernd Zeimetz, Josip Rodin, and Fabio Massimo Di Nitto
for their tireless efforts helping me track down this bug.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-09 16:13:08 -08:00
Adrian Bunk
e6fe6649b4 sched: proper prototype for kernel/sched.c:migration_init()
This patch adds a proper prototype for migration_init() in
include/linux/sched.h

Since there's no point in always returning 0 to a caller that doesn't check
the return value it also changes the function to return void.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 22:39:39 +01:00
Peter Zijlstra
b82d9fdd84 sched: avoid large irq-latencies in smp-balancing
SMP balancing is done with IRQs disabled and can iterate the full rq.
When rqs are large this can cause large irq-latencies. Limit the nr of
iterations on each run.

This fixes a scheduling latency regression reported by the -rt folks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09 22:39:39 +01:00