The 'pengutronix' address is defunct for years. Use the proper contact
address.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200502142653.19144-1-wsa@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
When the MFD driver is a loadable module, the watchdog driver fails
to get linked into the kernel:
drivers/watchdog/iTCO_wdt.o: In function `update_no_reboot_bit_pmc':
iTCO_wdt.c:(.text+0x54f): undefined reference to `intel_pmc_gcr_update'
The code is written to support operation without the MFD driver, so
add a Kconfig dependency that allows this, while disallowing the watchdog
to be built-in when the MFD driver is a module.
Fixes: 25f1ca31e2 ("platform/x86: intel_pmc_ipc: Convert to MFD")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20200428212959.2993304-1-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
There is actually no need to ping the watchdog before disabling it
during timeout change. Disabling the watchdog already takes care of
resetting the counter.
This fixes an issue during boot when the userspace watchdog handler takes
over and the watchdog is already running. Opening the watchdog in this case
leads to the first ping and directly after that without the required
heartbeat delay a second ping issued by the set_timeout call. Due to the
missing delay this resulted in a reset.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The watchdog might already be running during boot with a timeout set by
e.g. the bootloader. Make use of this pre-configured timeout instead of
falling back to the default timeout if no device tree value is given.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200403130728.39260-2-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
During probe try to set the timeout from device tree and fall back to
either the pre-configured timeout set by e.g. the bootloader in case the
watchdog is already running or the default value.
If the watchdog is already running make sure to update the timeout and
tell the framework about the running state to make sure the watchdog is
handled correctly until user space takes over. Updating the timeout also
removes the need for an additional manual ping so we can remove that as
well.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200403130728.39260-1-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Currently when running the samples/watchdog/watchdog-simple.c
application and forcing a kernel crash by doing:
# ./watchdog-simple &
# echo c > /proc/sysrq-trigger
The system does not reboot as expected.
Fix it by calling imx_sc_wdt_set_timeout() to configure the i.MX8QXP
watchdog with a proper timeout.
Cc: <stable@vger.kernel.org>
Fixes: 986857acbc ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reported-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Breno Lima <breno.lima@nxp.com>
Link: https://lore.kernel.org/r/20200412230122.5601-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If TS72XX_WATCHDOG is y and WATCHDOG_CORE is not enabled or its m,
then building fails:
drivers/watchdog/ts72xx_wdt.o: in function `ts72xx_wdt_probe':
ts72xx_wdt.c:(.text+0x14c): undefined reference to \
`watchdog_init_timeout'
ts72xx_wdt.c:(.text+0x15c): undefined reference to \
`devm_watchdog_register_device'
Select WATCHDOG_CORE to fix this.
Signed-off-by: Shyam Saini <shyam.saini@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200406215008.30468-1-shyam.saini@savoirfairelinux.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The restart handler is missing two things, first, the registers
has to be unlocked and second there is no synchronization for the
write_relaxed() calls.
This was tested on a custom board with the NXP LS1028A SoC.
Fixes: 6c5c0d48b6 ("watchdog: sp805: add restart handler")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module
which can be used as a watchdog. This IP provides a support for
windowed watchdog mode, in which the watchdog must be petted within
a certain time window. If it is petted either too soon, or too late,
a watchdog error will be triggered.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200312095808.19907-4-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The RAVE watchdog is not a full system watchdog, but is used to reset
ethernet switch when required. Change the name to better reflect this
usage.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200313101138.25915-1-l.stach@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the heartbeat module param is not specified we would get an error
message
watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
watchdog: f1020300.watchdog: falling back to default timeout (171)
This is because we were initialising heartbeat to -1. By removing the
initialisation (thus letting the C run time initialise it to 0) we
silence the warning message and the default timeout is still used.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
.remove callback implementation doesn' call clk_disable_unprepare() which
is buggy, actually, we can just use devm_watchdog_register_device() and
devm_add_action_or_reset() to handle all necessary operations for remove
action, then .remove callback can be dropped.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1582512687-13312-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Many watchdog drivers use watchdog_stop_on_reboot() helper in order
to stop the watchdog on system reboot. Unfortunately, this logic is
coded in driver's probe function and doesn't allows user to decide what
to do during shutdown/reboot.
On the other side, Xen and Qemu watchdog drivers (xen_wdt and i6300esb)
may be configured to either send NMI or turn off/reboot VM as
the watchdog action. As the kernel may stuck at any state, sending NMIs
can't reliably reboot the VM.
At Arista, we benefited from the following set-up: the emulated watchdogs
trigger VM reset and softdog is set to catch less severe conditions to
generate vmcore. Just before reboot watchdog's timeout is increased
to some good-enough value (3 mins). That keeps watchdog always running
and guarantees that VM doesn't stuck.
Provide new stop_on_reboot module parameter to let user control
watchdog's reboot policy.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200223114939.194754-1-dima@arista.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
An attempt to convert the driver to using GPIO descriptors
(see Link tag) was discouraged in favor of deleting the
handling of the update GPIO altogehter since there are
no in-tree users.
This patch deletes the GPIO handling instead.
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-watchdog/20200210102209.289379-1-linus.walleij@linaro.org/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200229115046.57781-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
There is nothing in use from init.h/reboot.h, remove them.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1582250430-8872-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The DT or ACPI tables should tell the driver what the irq flags are.
Given that this driver probes only on DT based platforms and those DT
platforms specify the irq flags we can safely drop the forced irq flag
setting here.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200220002047.115000-1-swboyd@chromium.org
[groeck: Context conflict resolution]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Some platform like ipq806x doesn't support pretimeout and define
some interrupts used by qcom,msm-timer. Change the driver to check
and use pretimeout only on qcom,kpss-wdt as it's the only platform
that actually supports it.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com
[groeck: Conflict resolution]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either
turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version
(or higher), and when legacy iTCO_vendorsupport is set. Modify the driver
so that ICH_RES_IO_SMI is optional if the two conditions are not met.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In preparation for making ->smi_res optional the iTCO_wdt driver needs
to know whether vendorsupport is being set to non-zero. For this reason
export the variable.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fix a couple of configuration issues in the ACPI watchdog (WDAT)
driver (Mika Westerberg) and make it possible to disable that
driver at boot time in case it still does not work as
expected (Jean Delvare).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl5Y6UYSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxj7YP/1qVMcIJo3CcItiQVV7+2S+WS+kK+Rf8
t6g+8F5KL0DBrDqji7l19kv0O+kPpn2uGnREcNk3T3mHEu0jSywghvBI+nzrym2P
Q+p2+2Fryy5zgiNTyhq7imA3IH4Zw5CVt6GRJjITvzFwhMGM38NQsDUbZEpZtJrz
HTVQyqPgmhvox5sa2Qk1+vZOtclWlkPenWmtJEs8m+Pg8w+Ejfs4Lj+CQYlI5RB8
GGhTgBiBMS7A80yTVxl8LULsrini6PWAGGY2yMScwDUYNZTAUuT8QSUx4/QBmyyP
U5K1sIK2pd/JuE2QqSBztrYC7x1fpfoBJylF8B0HK5uNBpZth7eXhe6t+xDYVTpw
U31unYfmcx6UT47lF/yWWNuhP6EDvdvZ0Xx4DHlgBJqKNuyfhz4Uazsr7HyLi2sI
/YrBPimtgvICFHYorrNVwEheTUEp+QXtNZp6aTugLGVX6zbQ3nZp7ajifNO7hdsQ
K+IjjRgH/YsVi9GQY/U3A/zTO+39fSupQgKiH33pG8Yp5bZbreoo1kPKzlnt23JJ
DXuaN7wH74sgT2EqZm30lFapF/0wv+iIpdWmorlE/4WwTwIeDck/ULeBiGFqpUI6
9Di10O6w+TJ+VevyJ5Hqkzukjlj93Vq+kCY8eOiWVpTga2ieQiYKFSbxDPE3OC1k
j2wkDwKqkh0o
=eIlw
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix a couple of configuration issues in the ACPI watchdog (WDAT)
driver (Mika Westerberg) and make it possible to disable that driver
at boot time in case it still does not work as expected (Jean
Delvare)"
* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: watchdog: Set default timeout in probe
ACPI: watchdog: Fix gas->access_width usage
ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
ACPI: watchdog: Allow disabling WDAT at boot
Since commit 057b52b4b3 ("watchdog: da9062: make restart handler atomic
safe"), the driver calls i2c functions directly. It now therefore depends
on I2C. This is a hard dependency which overrides COMPILE_TEST.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 057b52b4b3 ("watchdog: da9062: make restart handler atomic safe")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: Stefan Lengfeld <contact@stefanchrist.eu>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This fixes commit f6c98b0838 ("watchdog: da9062: add power management
ops"). During discussion [1] we agreed that this should be configurable
because it is a device quirk if we can't use the hw watchdog auto
suspend function.
[1] https://lore.kernel.org/linux-watchdog/20191128171931.22563-1-m.felsch@pengutronix.de/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: f6c98b0838 ("watchdog: da9062: add power management ops")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200207071518.5559-1-m.felsch@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the BIOS default timeout for the watchdog is too small userspace may
not have enough time to configure new timeout after opening the device
before the system is already reset. For this reason program default
timeout of 30 seconds in the driver probe and allow userspace to change
this from command line or through module parameter (wdat_wdt.timeout).
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI Generic Address Structure (GAS) access_width field is not in bytes
as the driver seems to expect in few places so fix this by using the
newly introduced macro ACPI_ACCESS_BYTE_WIDTH().
Fixes: b1abf6fc49 ("ACPI / watchdog: Fix off-by-one error at resource assignment")
Fixes: 058dfc7670 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl4vKHwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMPGBAAuVNUZaZfWYHpiVP2oRcUQUguFiD3NTbknsyzV2oH
J9P0GfeENSKwE9OOhZ7XIjnCZAJwQgTK/ppQY5yiQ/KAtYyyXjXEJ6jqqjiTDInr
+3+I3t/LhkgrK7tMrb7ylTGa/d7KhaciljnOXC8+b75iddvM9I1z2pbHDbppZMS9
wT4RXL/cFtRb85AfOyPLybcka3f5P2gGvQz38qyimhJYEzHDXZu9VO1Bd20f8+Xf
eLBKX0o6yWMhcaPLma8tm0M0zaXHEfLHUKLSOkiOk+eHTWBZ3b/w5nsOQZYZ7uQp
25yaClbameAn7k5dHajduLGEJv//ZjLRWcN3HJWJ5vzO111aHhswpE7JgTZJSVWI
ggCVkytD3ESXapvswmACSeCIDMmiJMzvn6JvwuSMVB7a6e5mcqTuGo/FN+DrBF/R
IP+/gY/T7zIIOaljhQVkiEIIwiD/akYo0V9fheHTBnqcKEDTHV4WjKbeF6aCwcO+
b8inHyXZSKSMG//UlDuN84/KH/o1l62oKaB1uDIYrrL8JVyjAxctWt3GOt5KgSFq
wVz1lMw4kIvWtC/Sy2H4oB+RtODLp6yJDqmvmPkeJwKDUcd/1JKf0KsZ8j3FpGei
/rEkBEss0KBKyFAgBSRO2jIpdj2epgcBcsdB/r5mlhcn8L77AS6mHbA173kY4pQ/
Kdg=
=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
The restart handler is executed during the shutdown phase which is
atomic/irq-less. The i2c framework supports atomic transfers since
commit 63b96983a5 ("i2c: core: introduce callbacks for atomic
transfers") to address this use case. Using regmap within an atomic
context is allowed only if the regmap type is MMIO and the cache type
'flat' or no cache is used. Using the i2c_smbus_write_byte_data()
function can be done without additional tests because:
1) the DA9062 is an i2c-only device and
2) the i2c framework emulates the smbus protocol if the host adapter
does not support smbus_xfer by using the master_xfer.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stefan Lengfeld <contact@stefanchrist.eu>
Tested-by: Stefan Lengfeld <contact@stefanchrist.eu>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200115162307.7336-1-m.felsch@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
IT8786 watchdog works as in IT872x
Tested on VECOW ECS-9000 board.
Signed-off-by: Vincent Prince <Vincent.PRINCE.fr@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200123140544.25937-1-vincent.prince.fr@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Currently on an rk3288 SoC when trying to use the watchdog the SoC will
instantly reset. This is due to the watchdog countdown counter being set
to its initial value of 0x0. Reset the watchdog counter before start in
order to correctly start the countdown timer from the right position.
Signed-off-by: Jack Mitchell <ml@embed.me.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200107155155.278521-1-ml@embed.me.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
After the commit 44ea39420f ("drivers/watchdog: make use of
devm_register_reboot_notifier()") the struct notifier_block reboot_nb in
the struct watchdog_device is removed from the reboot notifiers chain at
the time watchdog's chardev is closed. But at least in i6300esb.c case
reboot_nb is embedded in the struct esb_dev which can be freed on its
device removal and before the chardev is closed, thus UAF at reboot:
[ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28
ts# uname -r note the address ^^^
5.5.0-rc5-ae6088-wdog
ts# ./openwdog0 &
[1] 696
ts# opened /dev/watchdog0, sleeping 10s...
ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove
[ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28
esb_dev.watchdog_device.reboot_nb memory is freed here ^^^
ts# ...woken up
[ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8
[ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78
attempt to use memory already freed ^^^
[ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b
[ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b
freed memory is filled with a slub poison ^^^
[1]+ Done ./openwdog0
ts# reboot
[ 229.921862] systemd-shutdown[1]: Rebooting.
[ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0
[ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b
[ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL
[ 229.957584] general protection fault: 0000 [#1] SMP
[ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog
[ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0
[ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246
[ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3
[ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac
[ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3
[ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000
[ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa
... slub_debug=FZP poison ^^^
[ 229.989089] Call Trace:
[ 229.990157] blocking_notifier_call_chain+0x43/0x59
[ 229.991401] kernel_restart_prepare+0x14/0x30
[ 229.992607] kernel_restart+0x9/0x30
[ 229.993800] __do_sys_reboot+0x1d2/0x210
[ 230.000149] do_syscall_64+0x3d/0x130
[ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 230.002639] RIP: 0033:0x7f5461bdd177
[ 230.016402] Modules linked in: i6300esb
[ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix the crash by reverting 44ea39420f so unregister_reboot_notifier()
is called when watchdog device is removed. This also makes handling of
the reboot notifier unified with the handling of the restart handler,
which is freed with unregister_restart_handler() in the same place.
Fixes: 44ea39420f ("drivers/watchdog: make use of devm_register_reboot_notifier()")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
"%p" is not printing the pointer value.
In driver, printing pointer value is not useful so avoiding print.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1576825096-26605-1-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
platform_get_irq() prints an error message when the interrupt
is not available. So on platforms where bark interrupt is
not specified, following error message is observed on SDM845.
[ 2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found
This is also seen on SC7180, SM8150 SoCs as well.
Fix this by using platform_get_irq_optional() instead.
Fixes: 36375491a4 ("watchdog: qcom: support pre-timeout when the bark irq is available")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191213064934.4112-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Disable the watchdog during suspend if it is enabled and re-enable it on
resume. So we can sleep without the interruptions.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191128171931.22563-1-m.felsch@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
watchdog_dev.c provides means to allow users to set bigger timeout value
than HW can support, make DesignWare watchdog align with this.
Signed-off-by: Peng Wang <peng.1.wang@nokia-sbell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/8fa54e92c6cd4544a7a3eb60a373ac43@nokia-sbell.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should start/reset the watchdog
and tell the watchdog framework. As a result, ping can be generated from
the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set),
until the userspace watchdog daemon takes over control
Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver")
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for SAM9X60 WDT into sama5d4_wdt.
This means that this driver gets a flag inside the data struct
that represents the sam9x60 support.
This flag differentiates between the two hardware blocks, and is set
according to the compatible of the driver instantiation.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1574067012-18559-3-git-send-email-eugen.hristev@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fix:
orion_wdt f1020300.watchdog: IRQ index 1 not found
which is caused by platform_get_irq() now complaining when optional
IRQs are not found. Neither interrupt for orion is required, so
make them both optional.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Platform device aliases were missing so module autoloading
did not work.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails:
drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe':
tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout'
tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device'
Select WATCHDOG_CORE to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e3c21e088f ("watchdog: tqmx86: Add watchdog driver for the IO controller")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Since commit 747d88a1a8 ("watchdog: imx7ulp: Pass the wdog instance in
imx7ulp_wdt_enable()") imx7ulp_wdt_enable() accepts a watchdog_device
structure, so fix one instance that missed such conversion.
This also fixes the following sparse warning:
drivers/watchdog/imx7ulp_wdt.c:115:31: warning: incorrect type in argument 1 (different address spaces)
drivers/watchdog/imx7ulp_wdt.c:115:31: expected struct watchdog_device *wdog
drivers/watchdog/imx7ulp_wdt.c:115:31: got void [noderef] <asn:2>*base
Fixes: 747d88a1a8 ("watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191120140916.25001-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
