Commit Graph

6472 Commits

Author SHA1 Message Date
Ilya Dryomov
686238b743 rbd: remove snapshot existence validation code
RBD_DEV_FLAG_EXISTS check in rbd_queue_workfn() is racy and leads to
inconsistent behaviour.  If the object (or its snapshot) isn't there,
the OSD returns ENOENT.  A read submitted before the snapshot removal
notification is processed would be zero-filled and ended with status
OK, while future reads would be failed with IOERR.  It also doesn't
handle a case when an image that is mapped read-only is removed.

On top of this, because watch is no longer established for read-only
mappings, we no longer get notifications, so rbd_exists_validate() is
effectively dead code.  While failing requests rather than returning
zeros is a good thing, RBD_DEV_FLAG_EXISTS is not it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:03 +01:00
Ilya Dryomov
b9ef2b8858 rbd: don't establish watch for read-only mappings
With exclusive lock out of the way, watch is the only thing left that
prevents a read-only mapping from being used with read-only OSD caps.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:03 +01:00
Ilya Dryomov
3fe69921db rbd: don't acquire exclusive lock for read-only mappings
A read-only mapping should be usable with read-only OSD caps, so
neither the header lock nor the object map lock can be acquired.
Unfortunately, this means that images mapped read-only lose the
advantage of the object map.

Snapshots, however, can take advantage of the object map without
any exclusionary locks, so if the object map is desired, snapshot
the image and map the snapshot instead of the image.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:03 +01:00
Ilya Dryomov
c1b6205730 rbd: disallow read-write partitions on images mapped read-only
If an image is mapped read-only, don't allow setting its partition(s)
to read-write via BLKROSET: with the previous patch all writes to such
images are failed anyway.

If an image is mapped read-write, its partition(s) can be set to
read-only (and back to read-write) as before.  Note that at the rbd
level the image will remain writeable: anything sent down by the block
layer will be executed, including any write from internal kernel users.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:03 +01:00
Ilya Dryomov
b948ad7897 rbd: treat images mapped read-only seriously
Even though -o ro/-o read_only/--read-only options are very old, we
have never really treated them seriously (on par with snapshots).  As
a first step, fail writes to images mapped read-only just like we do
for snapshots.

We need this check in rbd because the block layer basically ignores
read-only setting, see commit a32e236eb9 ("Partially revert "block:
fail op_is_write() requests to read-only partitions"").

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:02 +01:00
Ilya Dryomov
39258aa2db rbd: introduce RBD_DEV_FLAG_READONLY
rbd_dev->opts is not available for parent images, making checking
rbd_dev->opts->read_only in various places (rbd_dev_image_probe(),
need_exclusive_lock(), use_object_map() in the following patches)
harder than it needs to be.

Keeping rbd_dev_image_probe() in mind, move the initialization in
do_rbd_add() up.  snap_id isn't filled in at that point, so replace
rbd_is_snap() with a snap_name comparison.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:02 +01:00
Ilya Dryomov
f3c0e45900 rbd: introduce rbd_is_snap()
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25 11:44:02 +01:00
Colin Ian King
6b0a877422 rbd: fix spelling mistake "requeueing" -> "requeuing"
There is a spelling mistake in a debug message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-25 11:44:02 +01:00
Linus Torvalds
be5fa3aac2 for-linus-20191121
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WwoQQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpuU/EAC5Z5aE899Fvu7wHr3kclKuzwQU3n+YHm0n
 bIS336e/bCp143KbUdBbRnFHB2/s/bgF5B1g+yBmJyLoFul5AWdpXlUq0MRFcIDI
 IgTTRqBIdmM9t+3WP36r5z/JFbtV+I3gkTsGdj7EDWuvZ9uLU66LpYzeIGVh3ehS
 vz52brvQLtcH/2F1jCNqkzTuvWa9LYj4kEH2kZZBlhH3RH9/VPvwhfyYKHfpS6d4
 B0VhlE/PE892vAnZvLU/XG7CanJ5SmU38TJv/2bihds3UoUniVWg6r0mPWC8qku/
 882lyibQmBVrFMHco2AuMwLiKualMR9ea8ao3lABuAFRvQq1jup+lpyPT10/teoO
 OHCzleCH/XNdTJsDb9O/d1J8shO91uzKCydRZATuiUqVE6zpvkI4ieFArI8/qIoF
 gPgPGNIGJnyB4TzCQ6Z+bM5yU11D3dIcvl8ZJhD6WRAcJfaIP5ZCkcKMdjBJQ9JJ
 GIOTeo218pv3KMMKTYsZEg/U/r7uomiBL7RvmLirZirykjKyYXWCXxxlm6+h8hrB
 NlpjIqkdaqw+JHMZIuSImiA4Bbc3lutrMAeuB0WPfLU2lE4+t7C2PAhn8E6u4Lc7
 DM2fEWdFmTi+Mp2hVQ6mPpIPRwP/tcyxRNcTuKHzYRfWtcgSTmWD7aHkGrPhNXvh
 y5MKB9bVyA==
 =D93r
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20191121' of git://git.kernel.dk/linux-block

Pull block fix from Jens Axboe:
 "Just a single fix for an issue in nbd introduced in this cycle"

* tag 'for-linus-20191121' of git://git.kernel.dk/linux-block:
  nbd:fix memory leak in nbd_get_socket()
2019-11-21 12:04:50 -08:00
Sun Ke
dff10bbea4 nbd:fix memory leak in nbd_get_socket()
Before returning NULL, put the sock first.

Cc: stable@vger.kernel.org
Fixes: cf1b2326b7 ("nbd: verify socket is supported during setup")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-19 09:23:26 -07:00
Linus Torvalds
b226c9e1f4 for-linus-20191115
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3O/gkQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpsLBD/47jITnsOf/EU1gqW8vbl+psrPYQN+p68id
 EA5L8fqF7wHg/Anxg9MApDO6noH8BvnfSGFnqxWoE5YcvT/mfj4pVciLMiNG2BwA
 hUiJCwIG8SGCn2MRbaTQpqRnMw8aoTKdJAUWwjZTl/db+X9aCv++Odn4XuAABfh2
 LxIb0ZZBF5M8CfKRHtksuCcGBftEUTrlCzSZ9dXI5tD8EpRNJw/5LDGB6w7inhcZ
 0+X7ENdSQrMKA9ImJunLPUDFejHu4fr4qJdAX67Qai0Wf2dR54eaXmTVO4d4SGcU
 UX0zpNC6bozCq+X/ICnlJkK+ECuR33xFLRIS0S7Xv2Er6n3Ul8N6cb6RRv8Q+o1h
 XG5NfpOH+Atqmdyp9zSRI2c2UVfIfmvmRVIUFM+ZXmdw5oSfUltGLdyNVnKuhzc+
 f2Y3dti96YnT35TIihKcwfqlFuaXfLfCmLYabtVylwlOJ80Sjhgea3IyvwstpJau
 uIs5X8Z5AdBuqufPj4veS3x73DeE7slGmzADcNtUeFb1K5423MJqlQUOeVeJW3x3
 85tS7aot/SoMnA1dtREvceerFP/lIa/02iqX0TYQ7BqsN5oZjQzaiuJkUfV2WNOs
 3TlNRBKF69tpX4+NXxaSm5kC0YHtHIWF0EtNliKM7Yi8WS0tVsy74pDO7otj3j1m
 s10Rr/1seA==
 =wP5w
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20191115' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few fixes that should make it into this release. This contains:

   - io_uring:
        - The timeout command assumes sequence == 0 means that we want
          one completion, but this kind of overloading is unfortunate as
          it prevents users from doing a pure time based wait. Since
          this operation was introduced in this cycle, let's correct it
          now, while we can. (me)
        - One-liner to fix an issue with dependent links and fixed
          buffer reads. The actual IO completed fine, but the link got
          severed since we stored the wrong expected value. (me)
        - Add TIMEOUT to list of opcodes that don't need a file. (Pavel)

   - rsxx missing workqueue destry calls. Old bug. (Chuhong)

   - Fix blk-iocost active list check (Jiufei)

   - Fix impossible-to-hit overflow merge condition, that still hit some
     folks very rarely (Junichi)

   - Fix bfq hang issue from 5.3. This didn't get marked for stable, but
     will go into stable post this merge (Paolo)"

* tag 'for-linus-20191115' of git://git.kernel.dk/linux-block:
  rsxx: add missed destroy_workqueue calls in remove
  iocost: check active_list of all the ancestors in iocg_activate()
  block, bfq: deschedule empty bfq_queues not referred by any process
  io_uring: ensure registered buffer import returns the IO length
  io_uring: Fix getting file for timeout
  block: check bi_size overflow before merge
  io_uring: make timeout sequence == 0 mean no sequence
2019-11-15 13:02:34 -08:00
Chuhong Yuan
dcb77e4b27 rsxx: add missed destroy_workqueue calls in remove
The driver misses calling destroy_workqueue in remove like what is done
when probe fails.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 13:59:49 -07:00
Ilya Dryomov
633739b2fe rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()
Some versions of gcc (so far 6.3 and 7.4) throw a warning:

  drivers/block/rbd.c: In function 'rbd_object_map_callback':
  drivers/block/rbd.c:2124:21: warning: 'current_state' may be used uninitialized in this function [-Wmaybe-uninitialized]
        (current_state == OBJECT_EXISTS && state == OBJECT_EXISTS_CLEAN))
  drivers/block/rbd.c:2092:23: note: 'current_state' was declared here
    u8 state, new_state, current_state;
                          ^~~~~~~~~~~~~

It's bogus because all current_state accesses are guarded by
has_current_state.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-14 19:00:53 +01:00
Dan Carpenter
8e9c523016 block: drbd: remove a stray unlock in __drbd_send_protocol()
There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.

Fixes: 44ed167da7 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 06:55:22 -07:00
Mike Christie
cf1b2326b7 nbd: verify socket is supported during setup
nbd requires socket families to support the shutdown method so the nbd
recv workqueue can be woken up from its sock_recvmsg call. If the socket
does not support the callout we will leave recv works running or get hangs
later when the device or module is removed.

This adds a check during socket connection/reconnection to make sure the
socket being passed in supports the needed callout.

Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com
Fixes: e9e006f5fc ("nbd: fix max number of supported devs")
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:37:21 -06:00
Josef Bacik
7ce23e8e0a nbd: handle racing with error'ed out commands
We hit the following warning in production

print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
 blk_mq_free_request+0xb7/0xf0
 blk_mq_complete_request+0x62/0xf0
 recv_work+0x29/0xa1 [nbd]
 process_one_work+0x1f5/0x3f0
 worker_thread+0x2d/0x3d0
 ? rescuer_thread+0x340/0x340
 kthread+0x111/0x130
 ? kthread_create_on_node+0x60/0x60
 ret_from_fork+0x1f/0x30
---[ end trace b079c3c67f98bb7c ]---

This was preceded by us timing out everything and shutting down the
sockets for the device.  The problem is we had a request in the queue at
the same time, so we completed the request twice.  This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.

Fix this by checking cmd->status in nbd_read_stat.  We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.

Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:20:03 -06:00
Josef Bacik
de6346ecbc nbd: protect cmd->status with cmd->lock
We already do this for the most part, except in timeout and clear_req.
For the timeout case we take the lock after we grab a ref on the config,
but that isn't really necessary because we're safe to touch the cmd at
this point, so just move the order around.

For the clear_req cause this is initiated by the user, so again is safe.

Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:20:01 -06:00
Chenwandun
f7daefe423 zram: fix race between backing_dev_show and backing_dev_store
CPU0:				       CPU1:
backing_dev_show		       backing_dev_store
    ......				   ......
    file = zram->backing_dev;
    down_read(&zram->init_lock);	   down_read(&zram->init_init_lock)
    file_path(file, ...);		   zram->backing_dev = backing_dev;
    up_read(&zram->init_lock);		   up_read(&zram->init_lock);

gets the value of zram->backing_dev too early in backing_dev_show, which
resultin the value being NULL at the beginning, and not NULL later.

backtrace:
  d_path+0xcc/0x174
  file_path+0x10/0x18
  backing_dev_show+0x40/0xb4
  dev_attr_show+0x20/0x54
  sysfs_kf_seq_show+0x9c/0x10c
  kernfs_seq_show+0x28/0x30
  seq_read+0x184/0x488
  kernfs_fop_read+0x5c/0x1a4
  __vfs_read+0x44/0x128
  vfs_read+0xa0/0x138
  SyS_read+0x54/0xb4

Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.com
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:32 -04:00
Dongsheng Yang
25e6be2123 rbd: cancel lock_dwork if the wait is interrupted
There is a warning message in my test with below steps:

  # rbd bench --io-type write --io-size 4K --io-threads 1 --io-pattern rand test &
  # sleep 5
  # pkill -9 rbd
  # rbd map test &
  # sleep 5
  # pkill rbd

The reason is that the rbd_add_acquire_lock() is interruptable,
that means, when we kill the waiting on ->acquire_wait, the lock_dwork
could be still running.

1. do_rbd_add()					2. lock_dwork
rbd_add_acquire_lock()
  - queue_delayed_work()
						lock_dwork queued
    - wait_for_completion_killable_timeout()  <-- kill happen
rbd_dev_image_unlock()	<-- UNLOCKED now, nothing to do.
rbd_dev_device_release()
rbd_dev_image_release()
  - ...
						lock successed here
     - cancel_delayed_work_sync(&rbd_dev->lock_dwork)

Then when we reach the rbd_dev_free(), WARN_ON is triggered because
lock_state is not RBD_LOCK_STATE_UNLOCKED.

To fix it, this commit make sure the lock_dwork was finished before
calling rbd_dev_image_unlock().

On the other hand, this would not happend in do_rbd_remove(), because
after rbd mapped, lock_dwork will only be queued for IO request, and
request will continue unless lock_dwork finished. when we call
rbd_dev_image_unlock() in do_rbd_remove(), all requests are done.
That means, lock_state should not be locked again after
rbd_dev_image_unlock().

[ Cancel lock_dwork in rbd_add_acquire_lock(), only if the wait is
  interrupted. ]

Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-10-15 17:43:15 +02:00
Linus Torvalds
297cbcccc2 for-linus-20191010
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl2f5MIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpvscD/4v8E1s1rt6JwqM0Fa27UjRdhfGnc8ad8vs
 fD7rf3ZmLkoM1apVopMcAscUH726wU4qbxwEUDEntxxv2wJHuZdSZ64zhFJ17uis
 uJ2pF4MpK/m6DnHZu/SAU4t9aU+l6SBqX0tS1bFycecPgGRk46jrVX5tNJggt0Fy
 hqmx3ACWbkGiFDERT2AAQ69WHfmzeI9aUjx3jJY2eLnK7OjjEpyoEBs0j/AHl3ep
 kydhItU5NSFCv94X7vmZy/dvQ5hE4/1HTFfg79fOZcywQi1AN5DafKxiM2kgaSJ0
 jW58i+AFVtUPysNpVsxvjAgqGwDX/UJkOkggPd6V8/6LMfEvBKY4YNXlUEbqTN3Y
 pqn19/cgdKHaQpHKqwettcQujc71kry/yHsaudD+g2fi0efYi3d4qxIp9XA0TF03
 z6jzp8Hfo2SKbwapIFPa7Wqj86ZpbBxtROibCA17WKSNzn0UR3pJmEigo4l364ow
 nJpvZChLDHZXjovgzISmUnbR+O1yP0+ZnI9b7kgNp0UV4SI5ajf6f2T7667dcQs0
 J1GNt4QvqPza3R0z1SuoEi6tbc3GyMj7NZyIseNOXR/NtqXEWtiNvDIuZqs6Wn/T
 4GhaF0Mjqc17B3UEkdU1z09HL0JR40vUrGYE4lDxHhPWd0YngDGJJX2pZG2Y0WBp
 VQ20AzijzQ==
 =wZnt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20191010' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Fix wbt performance regression introduced with the blk-rq-qos
   refactoring (Harshad)

 - Fix io_uring fileset removal inadvertently killing the workqueue (me)

 - Fix io_uring typo in linked command nonblock submission (Pavel)

 - Remove spurious io_uring wakeups on request free (Pavel)

 - Fix null_blk zoned command error return (Keith)

 - Don't use freezable workqueues for backing_dev, also means we can
   revert a previous libata hack (Mika)

 - Fix nbd sysfs mutex dropped too soon at removal time (Xiubo)

* tag 'for-linus-20191010' of git://git.kernel.dk/linux-block:
  nbd: fix possible sysfs duplicate warning
  null_blk: Fix zoned command return code
  io_uring: only flush workqueues on fileset removal
  io_uring: remove wait loop spurious wakeups
  blk-wbt: fix performance regression in wbt scale_up/scale_down
  Revert "libata, freezer: avoid block device removal while system is frozen"
  bdi: Do not use freezable workqueue
  io_uring: fix reversed nonblock flag for link submission
2019-10-11 08:45:32 -07:00
Xiubo Li
862488105b nbd: fix possible sysfs duplicate warning
1. nbd_put takes the mutex and drops nbd->ref to 0. It then does
idr_remove and drops the mutex.

2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails
to find an existing device, so it does nbd_dev_add.

3. just before the nbd_put could call nbd_dev_remove or not finished
totally, but if nbd_dev_add try to add_disk, we can hit:

debugfs: Directory 'nbd1' with parent 'block' already present!

This patch will make sure all the disk add/remove stuff are done
by holding the nbd_index_mutex lock.

Reported-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-10 09:44:56 -06:00
Keith Busch
79a85e214d null_blk: Fix zoned command return code
The return code from null_handle_zoned() sets the cmd->error value.
Returning OK status when an error occured overwrites the intended
cmd->error. Return the appropriate error code instead of setting the
error in the cmd.

Fixes: fceb5d1b19 ("null_blk: create a helper for zoned devices")
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-09 21:00:20 -06:00
Linus Torvalds
c4bd70e8c9 for-linus-2019-10-03
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl2WrkYQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjf1D/9wy2L/yAXA/KLQkwDZ2kn3tMtzMrsv6bOJ
 4UTdlLWKH2ihGg69iAE5f19iQSeNmqqXxBz0VvIBpFR7TqcRbGe0d9iVtoOsDhpZ
 c1OvQ2Ey35Xx1T2w6uMh0llgeWY2J/gJkY64unUxwUBUZwNOPA8ZjxqeXcMQmyAt
 sYmXpNLCT/f4YTYOYDgzoh5960TsCB/H+m/bLEVRvr0MaonvlaBUKRcysQikDFCQ
 yobzDmlSJqGKqlFJ2fnRVSkJC0BmBE5p8Ric9HHiUOT8BO31079IHUGbkbSh/csH
 0yPipNaYNMv+Hr0t9pgfcNbAt2weMK5HFgtpQwv8Frl4xjvBSWDS5fQesCVDjkZt
 +ROeOvQtjfeKtLy5PCu6BJwYpu8iYG9eGF8zxBQ4FBHM3tghcVhqssaNbfrVOW+u
 YXYbAuLMkLwKlmJ+6WBiVIMefyF59ue3+UJGECiCrj/BrgxUyw8HcGKwpKEAZSok
 VFGDukL0Y3flnoO/gyOf0GFaD5Uovr1sx82DCz05B/XEMfkqFMJRGkbyZBarJL69
 9QrnyGpF4rwtfg+usR1PmJ+9/oY/ypSk8N9MAIkoK9e1YIexxvBiXAf0k8AxuDyC
 uPuOiQgKcqUr3aF+ivao8dQB9NiK1bJGc4pqBPPN4ZYRSjMSfBT/cms4IeUyj0K6
 sokcB1p+CQ==
 =vKVl
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Mandate timespec64 for the io_uring timeout ABI (Arnd)

 - Set of NVMe changes via Sagi:
     - controller removal race fix from Balbir
     - quirk additions from Gabriel and Jian-Hong
     - nvme-pci power state save fix from Mario
     - Add 64bit user commands (for 64bit registers) from Marta
     - nvme-rdma/nvme-tcp fixes from Max, Mark and Me
     - Minor cleanups and nits from James, Dan and John

 - Two s390 dasd fixes (Jan, Stefan)

 - Have loop change block size in DIO mode (Martijn)

 - paride pg header ifdef guard (Masahiro)

 - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
   devices and suboptimal performance on others (Ming)

* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
  block: sed-opal: fix sparse warning: convert __be64 data
  block: sed-opal: fix sparse warning: obsolete array init.
  block: pg: add header include guard
  Revert "s390/dasd: Add discard support for ESE volumes"
  s390/dasd: Fix error handling during online processing
  io_uring: use __kernel_timespec in timeout ABI
  loop: change queue block size to match when using DIO
  blk-mq: apply normal plugging for HDD
  blk-mq: honor IO scheduler for multiqueue devices
  nvme-rdma: fix possible use-after-free in connect timeout
  nvme: Move ctrl sqsize to generic space
  nvme: Add ctrl attributes for queue_count and sqsize
  nvme: allow 64-bit results in passthru commands
  nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
  nvmet-tcp: remove superflous check on request sgl
  Added QUIRKs for ADATA XPG SX8200 Pro 512GB
  nvme-rdma: Fix max_hw_sectors calculation
  nvme: fix an error code in nvme_init_subsystem()
  nvme-pci: Save PCI state before putting drive into deepest state
  nvme-tcp: fix wrong stop condition in io_work
  ...
2019-10-04 09:56:51 -07:00
Martijn Coenen
85560117d0 loop: change queue block size to match when using DIO
The loop driver assumes that if the passed in fd is opened with
O_DIRECT, the caller wants to use direct I/O on the loop device.
However, if the underlying block device has a different block size than
the loop block queue, direct I/O can't be enabled. Instead of requiring
userspace to manually change the blocksize and re-enable direct I/O,
just change the queue block sizes to match, as well as the io_min size.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-01 09:36:01 -06:00
Linus Torvalds
cbafe18c71 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - almost all of the rest of -mm

 - various other subsystems

Subsystems affected by this patch series:
  memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
  cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
  cleanups, pagemap

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
  arch/sparc/include/asm/pgtable_64.h: fix build
  mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
  ntfs: remove (un)?likely() from IS_ERR() conditions
  IB/hfi1: remove unlikely() from IS_ERR*() condition
  xfs: remove unlikely() from WARN_ON() condition
  wimax/i2400m: remove unlikely() from WARN*() condition
  fs: remove unlikely() from WARN_ON() condition
  xen/events: remove unlikely() from WARN() condition
  checkpatch: check for nested (un)?likely() calls
  hexagon: drop empty and unused free_initrd_mem
  mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
  mm: introduce MADV_PAGEOUT
  mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
  mm: introduce MADV_COLD
  mm: untag user pointers in mmap/munmap/mremap/brk
  vfio/type1: untag user pointers in vaddr_get_pfn
  tee/shm: untag user pointers in tee_shm_register
  media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
  drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
  drm/amdgpu: untag user pointers
  ...
2019-09-26 10:29:42 -07:00
Michel Lespinasse
315cc066b8 augmented rbtree: add new RB_DECLARE_CALLBACKS_MAX macro
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks
for the case where the augmented value is a scalar whose definition
follows a max(f(node)) pattern.  This actually covers all present uses of
RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the
various RBCOMPUTE function definitions.

[walken@google.com: fix mm/vmalloc.c]
  Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com
[walken@google.com: re-add check to check_augmented()]
  Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com
Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 17:51:39 -07:00
Linus Torvalds
f41def3971 The highlights are:
- automatic recovery of a blacklisted filesystem session (Zheng Yan).
   This is disabled by default and can be enabled by mounting with the
   new "recover_session=clean" option.
 
 - serialize buffered reads and O_DIRECT writes (Jeff Layton).  Care is
   taken to avoid serializing O_DIRECT reads and writes with each other,
   this is based on the exclusion scheme from NFS.
 
 - handle large osdmaps better in the face of fragmented memory (myself)
 
 - don't limit what security.* xattrs can be get or set (Jeff Layton).
   We were overly restrictive here, unnecessarily preventing things like
   file capability sets stored in security.capability from working.
 
 - allow copy_file_range() within the same inode and across different
   filesystems within the same cluster (Luis Henriques)
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl2LoD8THGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzixRYB/9H5S4fif8Pn9eiXkIJiT9UZR/o7S1k
 ikfQNPeDxlBLKnoZXpDp2HqCu1/YuCcJ0zpZzPGGrKECZb7r+NaayxhmEXAZ+Vsg
 YwsO3eNHBbb58pe9T4oiHp19sflwcTOeNwg8wlvmvrgfBupFz2pU8Xm72EdFyoYm
 tP0QNTOCAuQK3pJcgozaptAO1TzBL3LomyVM0YzAKcumgMg47zALpaSLWJLGtDLM
 5+5WLvcVfBGLVv60h4B62ldS39eBxqTsFodcRMUaqAsnhLK70HVfKlwR3GgtZggr
 PDqbsuIfw/O3b65U2XDKZt1P9dyG3OE/ucueduXUxJPYNGmooEE+PpE+
 =DRVP
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - automatic recovery of a blacklisted filesystem session (Zheng Yan).
     This is disabled by default and can be enabled by mounting with the
     new "recover_session=clean" option.

   - serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is
     taken to avoid serializing O_DIRECT reads and writes with each
     other, this is based on the exclusion scheme from NFS.

   - handle large osdmaps better in the face of fragmented memory
     (myself)

   - don't limit what security.* xattrs can be get or set (Jeff Layton).
     We were overly restrictive here, unnecessarily preventing things
     like file capability sets stored in security.capability from
     working.

   - allow copy_file_range() within the same inode and across different
     filesystems within the same cluster (Luis Henriques)"

* tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits)
  ceph: call ceph_mdsc_destroy from destroy_fs_client
  libceph: use ceph_kvmalloc() for osdmap arrays
  libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc()
  ceph: allow object copies across different filesystems in the same cluster
  ceph: include ceph_debug.h in cache.c
  ceph: move static keyword to the front of declarations
  rbd: pull rbd_img_request_create() dout out into the callers
  ceph: reconnect connection if session hang in opening state
  libceph: drop unused con parameter of calc_target()
  ceph: use release_pages() directly
  rbd: fix response length parameter for encoded strings
  ceph: allow arbitrary security.* xattrs
  ceph: only set CEPH_I_SEC_INITED if we got a MAC label
  ceph: turn ceph_security_invalidate_secctx into static inline
  ceph: add buffered/direct exclusionary locking for reads and writes
  libceph: handle OSD op ceph_pagelist_append() errors
  ceph: don't return a value from void function
  ceph: don't freeze during write page faults
  ceph: update the mtime when truncating up
  ceph: fix indentation in __get_snap_name()
  ...
2019-09-25 10:21:13 -07:00
Jens Axboe
eb09b3cc46 pktcdvd: remove warning on attempting to register non-passthrough dev
Anatoly reports that he gets the below warning when booting -git on
a sparc64 box on debian unstable:

...
[   13.352975] aes_sparc64: Using sparc64 aes opcodes optimized AES
implementation
[   13.428002] ------------[ cut here ]------------
[   13.428081] WARNING: CPU: 21 PID: 586 at
drivers/block/pktcdvd.c:2597 pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428147] Attempt to register a non-SCSI queue
[   13.428184] Modules linked in: pktcdvd libdes cdrom aes_sparc64
n2_rng md5_sparc64 sha512_sparc64 rng_core sha256_sparc64 flash
sha1_sparc64 ip_tables x_tables ipv6 crc_ccitt nf_defrag_ipv6 autofs4
ext4 crc16 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy
async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear
md_mod crc32c_sparc64
[   13.428452] CPU: 21 PID: 586 Comm: pktsetup Not tainted
5.3.0-10169-g574cc4539762 #1234
[   13.428507] Call Trace:
[   13.428542]  [00000000004635c0] __warn+0xc0/0x100
[   13.428582]  [0000000000463634] warn_slowpath_fmt+0x34/0x60
[   13.428626]  [000000001045b244] pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428674]  [000000001045ccf4] pkt_ctl_ioctl+0x94/0x220 [pktcdvd]
[   13.428724]  [00000000006b95c8] do_vfs_ioctl+0x628/0x6e0
[   13.428764]  [00000000006b96c8] ksys_ioctl+0x48/0x80
[   13.428803]  [00000000006b9714] sys_ioctl+0x14/0x40
[   13.428847]  [0000000000406294] linux_sparc_syscall+0x34/0x44
[   13.428890] irq event stamp: 4181
[   13.428924] hardirqs last  enabled at (4189): [<00000000004e0a74>]
console_unlock+0x634/0x6c0
[   13.428984] hardirqs last disabled at (4196): [<00000000004e0540>]
console_unlock+0x100/0x6c0
[   13.429048] softirqs last  enabled at (3978): [<0000000000b2e2d8>]
__do_softirq+0x498/0x520
[   13.429110] softirqs last disabled at (3967): [<000000000042cfb4>]
do_softirq_own_stack+0x34/0x60
[   13.429172] ---[ end trace 2220ca468f32967d ]---
[   13.430018] pktcdvd: setup of pktcdvd device failed
[   13.455589] des_sparc64: Using sparc64 des opcodes optimized DES
implementation
[   13.515334] camellia_sparc64: Using sparc64 camellia opcodes
optimized CAMELLIA implementation
[   13.522856] pktcdvd: setup of pktcdvd device failed
[   13.529327] pktcdvd: setup of pktcdvd device failed
[   13.532932] pktcdvd: setup of pktcdvd device failed
[   13.536165] pktcdvd: setup of pktcdvd device failed
[   13.539372] pktcdvd: setup of pktcdvd device failed
[   13.542834] pktcdvd: setup of pktcdvd device failed
[   13.546536] pktcdvd: setup of pktcdvd device failed
[   15.431071] XFS (dm-0): Mounting V5 Filesystem
...

Apparently debian auto-attaches any cdrom like device to pktcdvd, which
can lead to the above warning. There's really no reason to warn for this
situation, kill it.

Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-22 10:01:05 -06:00
Xiubo Li
8454d68563 nbd: fix possible page fault for nbd disk
When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
time when the socket is closed due to the server daemon is restarted,
just before the last DISCONNET is totally done if we start a new connection
by using the old nbd_index, there will be crashing randomly, like:

<3>[  110.151949] block nbd1: Receive control failed (result -32)
<1>[  110.152024] BUG: unable to handle page fault for address: 0000058000000840
<1>[  110.152063] #PF: supervisor read access in kernel mode
<1>[  110.152083] #PF: error_code(0x0000) - not-present page
<6>[  110.152094] PGD 0 P4D 0
<4>[  110.152106] Oops: 0000 [#1] SMP PTI
<4>[  110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
<4>[  110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
<4>[  110.152166] Workqueue: knbd-recv recv_work [nbd]
<4>[  110.152187] RIP: 0010:__dev_printk+0xd/0x67
<4>[  110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
<4>[  110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
<4>[  110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
<4>[  110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
<4>[  110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
<4>[  110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
<4>[  110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
<4>[  110.152329] FS:  0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
<4>[  110.152362] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
<4>[  110.152401] Call Trace:
<4>[  110.152422]  _dev_err+0x6c/0x83
<4>[  110.152435]  nbd_read_stat.cold+0xda/0x578 [nbd]
<4>[  110.152448]  ? __switch_to_asm+0x34/0x70
<4>[  110.152468]  ? __switch_to_asm+0x40/0x70
<4>[  110.152478]  ? __switch_to_asm+0x34/0x70
<4>[  110.152491]  ? __switch_to_asm+0x40/0x70
<4>[  110.152501]  ? __switch_to_asm+0x34/0x70
<4>[  110.152511]  ? __switch_to_asm+0x40/0x70
<4>[  110.152522]  ? __switch_to_asm+0x34/0x70
<4>[  110.152533]  recv_work+0x35/0x9e [nbd]
<4>[  110.152547]  process_one_work+0x19d/0x340
<4>[  110.152558]  worker_thread+0x50/0x3b0
<4>[  110.152568]  kthread+0xfb/0x130
<4>[  110.152577]  ? process_one_work+0x340/0x340
<4>[  110.152609]  ? kthread_park+0x80/0x80
<4>[  110.152637]  ret_from_fork+0x35/0x40

This is very easy to reproduce by running the nbd-runner.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17 20:03:49 -06:00
Xiubo Li
ec76a7b922 nbd: rename the runtime flags as NBD_RT_ prefixed
Preparing for the destory when disconnecting crash fixing.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17 20:03:49 -06:00
Linus Torvalds
7ad67ca553 for-5.4/block-2019-09-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1/no0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmo9EACFXMbdNmEEUMyRSdOkVLlr7ZlTyQi1tLpB
 YESDPxdBfybzpi0qa8JSaysGIfvSkSjmSAqBqrWPmASOSOL6CK4bbA4fTYbgPplk
 XeHUdgGiG34oCQUn8Xil5reYaTm7I6LQWnWTpVa5fIhAyUYaGJL+987ykoGmpQmB
 Dvf3YSc+8H0RTp9PCMVd6UCGPkZbVlLImGad3PF5ULvTEaE4RCXC2aiAgh0p1l5A
 J2CkRZ+/mio3zN2O4YN7VdPGfr1Wo1iZ834xbIGLegv1miHXagFk7jwTcC7zIt5t
 oSnJnqIg3iCe7SpWt4Bkzw/zy/2UqaspifbCMgw8vychlViVRUHFO5h85Yboo7kQ
 OMLEQPcwjm6dTHv5h1iXF9LW1O7NoiYmmgvApU9uOo1HUrl1X7PZ3JEfUsVHxkOO
 T4D5igf0Krsl1eAbiwEUQzy7vFZ8PlRHqrHgK+fkyotzHu1BJR7OQkYygEfGFOB/
 EfMxplGDpmibYGuWCwDX2bPAmLV3SPUQENReHrfPJRDt5TD1UkFpVGv/PLLhbr0p
 cLYI78DKpDSigBpVMmwq5nTYpnex33eyDTTA8C0sakcsdzdmU5qv30y3wm4nTiep
 f6gZo6IMXwRg/rCgVVrd9SKQAr/8wEzVlsDW3qyi2pVT8sHIgm0tFv7paihXGdDV
 xsKgmTrQQQ==
 =Qt+h
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...
2019-09-17 16:57:47 -07:00
André Almeida
9c7eddf1b0 null_blk: format pr_* logs with pr_fmt
Instead of writing "null_blk: " at the beginning of each
pr_err/info/warn log message, format messages using pr_fmt() macro.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16 08:38:29 -06:00
André Almeida
701dfc4288 null_blk: match the type of parameter nr_devices
Since the variable nr_devices is an unsigned int, the module_param()
should also use this type. Change the type so they can match.

Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16 08:38:27 -06:00
André Almeida
4467453502 null_blk: do not fail the module load with zero devices
The module load should fail only if there is something wrong with the
configuration or if an error prevents it to work properly. The module
should be able to be loaded with (nr_device == 0), since it will not
trigger errors or be in malfunction state. Preventing loading with zero
devices also breaks applications that configures this module using
configfs API. Remove the nr_device check to fix this.

Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-16 08:38:26 -06:00
Ilya Dryomov
21ed05a8ba rbd: pull rbd_img_request_create() dout out into the callers
Make it more informative: log op_type, offset and length for block
layer requests and initiating obj_req for child requests.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Dongsheng Yang
5435d20695 rbd: fix response length parameter for encoded strings
rbd_dev_image_id() allocates space for length but passes a smaller
value to rbd_obj_method_sync().  rbd_dev_v2_object_prefix() doesn't
allocate space for length.  Fix both to be consistent.

Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
André Almeida
f7c4ce890d null_blk: validate the number of devices
A negative number of devices is nonsensical, so change the type to
unsigned. If the number of devices is 0, it is impossible for userspace
to interact with the module, so refuse loading the driver for that case.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-11 16:04:25 -06:00
André Almeida
4e47ee8fbe null_blk: fix module name at log message
The name of the module is "null_blk", not "null". Make `pr_info()` follow
the pattern of `pr_err()` log messages.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-11 16:04:24 -06:00
Damien Le Moal
780d97a990 block: Set ELEVATOR_F_ZBD_SEQ_WRITE for nullblk zoned disks
Using the helper blk_queue_required_elevator_features(), set the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request
queue of null_blk devices created with zoned mode enabled.

This feature requirement can always be satisfied as the mq-deadline
elevator is always selected for in-kernel compilation when
CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05 19:52:34 -06:00
zhengbin
03754ea361 paride/pcd: need to check if cd->disk is null in pcd_detect
If alloc_disk fails in pcd_init_units, cd->disk & pi are empty, we need
to check if cd->disk is null in pcd_detect.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-04 07:04:37 -06:00
zhengbin
d821cce8ac paride/pcd: need to set queue to NULL before put_disk
In pcd_init_units, if blk_mq_init_sq_queue fails, need to set queue to
NULL before put_disk, otherwise null-ptr-deref Read will occur.

put_disk
  kobject_put
    disk_release
      blk_put_queue(disk->queue)

Fixes: f0d1762554 ("paride/pcd: Fix potential NULL pointer dereference and mem leak")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-04 07:01:02 -06:00
zhengbin
ecf4d59a4e paride/pf: need to set queue to NULL before put_disk
In pf_init_units, if blk_mq_init_sq_queue fails, need to set queue to
NULL before put_disk, otherwise null-ptr-deref Read will occur.

put_disk
  kobject_put
    disk_release
      blk_put_queue(disk->queue)

Fixes: 77218ddf46 ("paride: convert pf to blk-mq")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-04 07:00:33 -06:00
Ilya Dryomov
d435c9a7b8 rbd: restore zeroing past the overlap when reading from parent
The parent image is read only up to the overlap point, the rest of
the buffer should be zeroed.  This snuck in because as it turns out
the overlap test case has not been triggering this code path for
a while now.

Fixes: a9b67e6994 ("rbd: replace obj_req->tried_parent with obj_req->read_state")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-08-28 12:34:11 +02:00
Jens Axboe
38b4e09fbc null_blk: fix inline misuse
You can't magically mark a function inline and expect that to work.

Fixes: fceb5d1b19 ("null_blk: create a helper for zoned devices")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 12:49:00 -06:00
Chaitanya Kulkarni
a3d7d67403 null_blk: create a helper for req completion
This patch creates a helper function for handling the request
completion in the null_handle_cmd().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:05 -06:00
Chaitanya Kulkarni
fceb5d1b19 null_blk: create a helper for zoned devices
This patch creates a helper function for handling zoned block device
operations.

This patch also restructured the code for null_blk_zoned.c and uses the
pattern to return blk_status_t and catch the error in the function
null_handle_cmd() into cmd->error variable instead of setting it up in
the deeper layer just like the way it is done for flush, badblocks and
memory backed case in the null_handle_cmd(). We also move
null_handle_zoned() to the null_blk_zoned.c to keep the zoned code
separate.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:05 -06:00
Chaitanya Kulkarni
7ea88e229e null_blk: create a helper for mem-backed ops
This patch creates a helper for handling requests when null_blk is
memory backed in the null_handle_cmd(). Although the helper is very
simple right now, it makes the code flow consistent with the rest of
code in the null_handle_cmd() and provides a uniform code structure
for future code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:05 -06:00
Chaitanya Kulkarni
8f94d1c1dc null_blk: create a helper for badblocks
This patch creates a helper for handling badblocks code in the
null_handle_cmd().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:05 -06:00
Chaitanya Kulkarni
adb8428479 null_blk: create a helper for throttling
This patch creates a helper for handling throttling code in the
null_handle_cmd().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:04 -06:00
Chaitanya Kulkarni
d4b186ed22 null_blk: move duplicate code to callers
This is a preparation patch which moves the duplicate code for sectors
and nr_sectors calculations for bio vs request mode into their
respective callers (null_queue_bio(), null_qeueue_req()). Now the core
function only deals with the respective actions and commands instead of
having to calculte the bio vs req operations and different sector
related variables. We also move the flush command handling at the top
which significantly simplifies the rest of the code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-23 06:58:04 -06:00