Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory
Controller with Compact Flash True IDE Mode logic.
Driver have to switch 8/16 bit bus width when accessing Task Tile or Data
Register. Moreover some extra things need to be done when setting PIO mode.
Only PIO mode is used, hardware have no DMA support. If interrupt line is
connected through GPIO extra quirk is needed to cope with fake interrupts.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Commit 9567b349f7 (ide: merge ->atapi_*put_bytes
and ->ata_*put_data methods) introduced a regression WRT the odd-length ATAPI
PIO transfers -- the final word didn't get written (causing command timeouts).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fix this sparse warnings:
drivers/ide/ide-disk_proc.c:130:11: warning: Using plain integer as NULL pointer
drivers/ide/ide-floppy_proc.c:32:11: warning: Using plain integer as NULL pointer
drivers/ide/ide-proc.c:234:11: warning: Using plain integer as NULL pointer
drivers/ide/ide-tape.c:2141:11: warning: Using plain integer as NULL pointer
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Cc: kernel-janitors@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
bart:
It seems like the bug could cause insanely long timeouts for:
- ATA_DMA_ERR error in dma_timer_expiry()
- commands without ->expiry in tc86c001_timer_expiry()
(TC86C001 IDE controller only)
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: port it to the current tree]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
fsl_get_sys_freq() may return -1 when 'soc' isn't found, but in
gef_wdt_probe() 'freq' is unsigned, so the test doesn't catch that.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On arm-acs5k_tiny:
drivers/watchdog/ks8695_wdt.c:68: error: 'CLOCK_TICK_RATE' undeclared
(first use in this function)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
Impact: cleanup, micro-optimization
Pre-initialize boot_cpu_data.x86_phys_bits to a reasonable default
to remove the use of system_state tests in __virt_addr_valid()
and __phys_addr().
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rather than relying on the ever-unreliable system_state,
add a specific __vmalloc_start_set flag to indicate whether
the vmalloc area has meaningful boundaries yet, and use that
in x86-32's __phys_addr and __virt_addr_valid.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
gcc 3.2.2 reports:
In file included from /usr/src/all/linux-next/arch/x86/include/asm/page.h:8,
from /usr/src/all/linux-next/arch/x86/include/asm/processor.h:18,
from /usr/src/all/linux-next/arch/x86/include/asm/atomic_32.h:6,
from /usr/src/all/linux-next/arch/x86/include/asm/atomic.h:2,
from include/linux/crypto.h:20,
from arch/x86/kernel/asm-offsets_32.c:7,
from arch/x86/kernel/asm-offsets.c:2:
/usr/src/all/linux-next/arch/x86/include/asm/page_types.h:54: warning: parameter has incomplete type
/usr/src/all/linux-next/arch/x86/include/asm/page_types.h:56: warning: parameter has incomplete type
In file included from /usr/src/all/linux-next/arch/x86/include/asm/page.h:8,
from /usr/src/all/linux-next/arch/x86/include/asm/processor.h:18,
from include/linux/prefetch.h:14,
from include/linux/list.h:6,
from include/linux/module.h:9,
from init/main.c:13:
/usr/src/all/linux-next/arch/x86/include/asm/page_types.h:54: warning: parameter has incomplete type
/usr/src/all/linux-next/arch/x86/include/asm/page_types.h:56: warning: parameter has incomplete type
This is a bogus warning, but moving the pat-related functions
into asm/pat.h and including asm/pgtable_types.h should fix it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
In preparation for moving the function declaration to a header file,
unify 32-bit and 64-bit signatures.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-16-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The table_start, table_end, and table_top are too generic for global
namespace so rename them to be more specific.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-15-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch moves the init_memory_mapping() function to common mm/init.c.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-14-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch adds an empty static inline init_gbpages() for the 32-bit
version of init_memory_mapping() making both versions identical.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-13-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
As a trivial preparation for moving common code to arc/x86/mm/init.c,
ifdef the 32-bit and 64-bit versions of NR_RANGE_MR.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-12-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
To reduce the diff between the 32-bit and 64-bit versions of
init_memory_mapping(), ifdef configuration specific pfn setup
code in the function.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-11-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
To reduce the diff between the 32-bit and 64-bit versions of
init_memory_mapping(), ifdef configuration specific setup code
in the function.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-10-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch adds a sanity check to the 32-bit version of
init_memory_mapping() to reduce the diff to the 64-bit version.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-9-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The 64-bit version of init_memory_mapping() uses the last mapped
address returned from kernel_physical_mapping_init() whereas the
32-bit version doesn't. This patch adds relevant ifdefs to both
versions of the function to reduce the diff between them.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-8-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch renames after_init_bootmem to after_bootmem in
mm/init_32.c to reduce the diff to the 64-bit version of of
init_memory_mapping().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-7-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The save_mr() function already checks that start_pfn is less than
end_pfn so we can remove the unnecessary check which reduces the
diff between the 32-bit and the 64-bit versions of init_memory_mapping().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-6-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Enabling NX, PSE, and PGE are only required on 32-bit so ifdef them
in both versions of the function.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-5-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch moves pgd_base out of init_memory_mapping() to reduce
the diff between the 32-bit version and the 64-bit version of the
function.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-4-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
There are some minor differences between the 32-bit and 64-bit
find_early_table_space() functions. This patch wraps those
differences under CONFIG_X86_32 to make the function identical
on both configurations.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-3-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
To reduce the diff between the 32-bit and 64-bit versions of
init_memory_mapping(), add gbpages support to the 32-bit version.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-2-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
To reduce the diff between the 32-bit and 64-bit versions of
init_memory_mapping(), fix up all trivial issues.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1236257708-27269-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive
was reported as 1.1TB in capacity by libata:
http://lkml.org/lkml/2009/2/13/134
This was caused by libata trusting the drive's reported current capacity in
sectors in identify words 57 and 58 if the drive does not support LBA and the
current CHS translation values appear valid. Unfortunately it seems older
ATA specs were vague about what this field should contain and a number of drives
used values with wrong byte order or that were totally bogus. There's no
unique information that it conveys and so we can just calculate the number
of sectors from the reported current CHS values.
While we're at it, clean up this function to use named constants for the
identify word values.
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
When SCR access is available and the link is offline, softreset is
skipped as it only wastes time and some controllers don't respond very
well. However, the skip path forgot to thaw the port, which not only
blocks further event notification from the port but also causes
repeated EH invocations on the same event on drivers which rely on
->thaw() to clear events if the IRQ is shared with another device or
port.
This problem has always been there but is uncovered by recent sata_nv
nf2/3 change which dropped hardreset support while maintaining SCR
access. nf2/3 doesn't clear hotplug event mask from the interrupt
handler but relies on ->thaw() to clear them. When the hardreset was
there, the reset action was never skipped and the port was always
thawed but, with the hardreset gone, ->prereset() determines that
there's no need for softreset and both ->softreset() and ->thaw() are
skipped. This leads to stuck hotplug event in the IRQ status register
triggering hotplug event whenever IRQ is delieverd on the same IRQ.
As the controller shares the same IRQ for both ports, this happens on
every IO if one port is occpupied and the other isn't.
This patch fixes the problem by making sure that the port is thawed on
reset-skip path.
bko#11615 reports this problem.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockrwd@gmail.com>
Reported-by: Dan Andresan <danyer@gmail.com>
Reported-by: Arne Woerner <arne_woerner@yahoo.com>
Reported-by: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Update MODULE_PARM_DESC for ADMA to reflect the fact that the
option is disabled by default.
Signed-off-by: Brandon Ehle <azverkan@yahoo.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Added the Device IDs for MCP89 AHCI controller.
Removed the IDs of MCP7B because this chipset had been cancelled.
Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
sense_buffer is used as DMA target and shouldn't be allocated on
stack. Use ap->sector_buf instead. This problem is spotted by Chuck
Ebbert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
ap->sector_buf is used as DMA target and should at least be aligned on
cacheline. This caused problems on some embedded machines.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
libata passes the returned value of dma_map_sg() to
dma_unmap_sg(),which is the misuse of dma_unmap_sg().
DMA-mapping.txt says:
To unmap a scatterlist, just call:
pci_unmap_sg(pdev, sglist, nents, direction);
Again, make sure DMA activity has already finished.
PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be
the _same_ one you passed into the pci_map_sg call,
it should _NOT_ be the 'count' value _returned_ from the
pci_map_sg call.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This fixes problems during resume with drives that take longer than 1s to
be ready. The ATA-6 spec appears to allow 5 seconds for a drive to be
ready.
On one affected system, this patch changes "PM: resume devices took..."
message from 17 seconds to 4 seconds, and gets rid of a lot of ugly
timeout/error messages.
Without this patch, the libata code moves on after 1s, tries to send a
soft reset (which the drive doesn't see because it isn't ready) which also
times out, then an IDENTIFY command is sent to the drive which times out,
and finally the error handler will try to send another hard reset which
will finally get things working.
Signed-off-by: Stuart Hayes <stuart_hayes@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Upon a 'transfer error block' size is set to -EINVAL, but this becomes positive
since size is unsigned: p->offset still gets incremented.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Commit 5e4c91c84b forgot to remove the
initial sleep, get rid of it.
Thanks to Randy Dunlap <randy.dunlap@oracle.com> for spotting this error.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
When booting Xen Dom0 on a pre-release 3.2.1 hypervisor the system Oopses on a
"Unable to handle kernel NULL pointer dereference" in xenwatch.
From the backtrace it looks like backend_changed is calling bdget_disk
with a NULL pointer. Checking for NULL and returning ENODEV instead
allows the kernel to boot.
Use copy_to_user_page and copy_from_user_page instead of
memcpy. copy_to_user_page does cache flush when necessary.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Random read/write errors are a bad thing - so don't let anyone
(including the test bench) run on something we know is bad.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>