x32 has always followed the time64 calling conventions of these
syscalls, which required a special hack in compat_get_timespec
aka get_old_timespec32 to continue working.
Since we now have the time64 syscalls, use those explicitly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex is not y2038 safe.
Switch all the syscall apis to use y2038 safe __kernel_timex.
Note that sys_adjtimex() does not have a y2038 safe solution. C libraries
can implement it by calling clock_adjtime(CLOCK_REALTIME, ...).
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex is not y2038 safe.
Replace all uses of timex with y2038 safe __kernel_timex.
Note that struct __kernel_timex is an ABI interface definition.
We could define a new structure based on __kernel_timex that
is only available internally instead. Right now, there isn't
a strong motivation for this as the structure is isolated to
a few defined struct timex interfaces and such a structure would
be exactly the same as struct timex.
The patch was generated by the following coccinelle script:
virtual patch
@depends on patch forall@
identifier ts;
expression e;
@@
(
- struct timex ts;
+ struct __kernel_timex ts;
|
- struct timex ts = {};
+ struct __kernel_timex ts = {};
|
- struct timex ts = e;
+ struct __kernel_timex ts = e;
|
- struct timex *ts;
+ struct __kernel_timex *ts;
|
(memset \| copy_from_user \| copy_to_user \)(...,
- sizeof(struct timex))
+ sizeof(struct __kernel_timex))
)
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts,
+ struct __kernel_timex *ts,
...) {
...
}
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts) {
+ struct __kernel_timex *ts) {
...
}
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sparc64 is the only architecture on Linux that has a 'timeval'
definition with a 32-bit tv_usec but a 64-bit tv_sec. This causes
problems for sparc32 compat mode when we convert it to use the
new __kernel_timex type that has the same layout as all other
64-bit architectures.
To avoid adding sparc64 specific code into the generic adjtimex
implementation, this adds a wrapper in the sparc64 system call handling
that converts the sparc64 'timex' into the new '__kernel_timex'.
At this point, the two structures are defined to be identical,
but that will change in the next step once we convert sparc32.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A small typo has crept into the y2038 conversion of the timer_settime
system call. So far this was completely harmless, but once we start
using the new version, this has to be fixed.
Fixes: 6ff8473507 ("time: Change types to new y2038 safe __kernel_itimerspec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex uses struct timeval internally.
struct timeval is not y2038 safe.
Introduce a new UAPI type struct __kernel_timex
that is y2038 safe.
struct __kernel_timex uses a timeval type that is
similar to struct __kernel_timespec which preserves the
same structure size across 32 bit and 64 bit ABIs.
struct __kernel_timex also restructures other members of the
structure to make the structure the same on 64 bit and 32 bit
architectures.
Note that struct __kernel_timex is the same as struct timex
on a 64 bit architecture.
The above solution is similar to other new y2038 syscalls
that are being introduced: both 32 bit and 64 bit ABIs
have a common entry, and the compat entry supports the old 32 bit
syscall interface.
Alternatives considered were:
1. Add new time type to struct timex that makes use of padded
bits. This time type could be based on the struct __kernel_timespec.
modes will use a flag to notify which time structure should be
used internally.
This needs some application level changes on both 64 bit and 32 bit
architectures. Although 64 bit machines could continue to use the
older timeval structure without any changes.
2. Add a new u8 type to struct timex that makes use of padded bits. This
can be used to save higher order tv_sec bits. modes will use a flag to
notify presence of such a type.
This will need some application level changes on 32 bit architectures.
3. Add a new compat_timex structure that differs in only the size of the
time type; keep rest of struct timex the same.
This requires extra syscalls to manage all 3 cases on 64 bit
architectures. This will not need any application level changes but will
add more complexity from kernel side.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want to reuse the compat_timex handling on 32-bit architectures the
same way we are using the compat handling for timespec when moving to
64-bit time_t.
Move all definitions related to compat_timex out of the compat code
into the normal timekeeping code, along with a rename to old_timex32,
corresponding to the timespec/timeval structures, and make it controlled
by CONFIG_COMPAT_32BIT_TIME, which 32-bit architectures will then select.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are all for ignoring the lack of obsolete system calls,
which have been marked the same way in scripts/checksyscall.sh,
so these can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Alpha has traditionally followed the OSF1 calling conventions
here, with its getxpid, getxuid, getxgid system calls returning
two different values in separate registers.
Following what glibc has done here, we can define getpid,
getuid and getgid to be aliases for getxpid, getxuid and getxgid
respectively, and add new system call numbers for getppid, geteuid
and getegid.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As Joseph Myers points out, alpha has never had a standard statfs64
interface and instead returns only 32-bit numbers here.
While there is an old osf_statfs64 system call that returns additional
data, this has some other quirks and does not get used in glibc.
I considered making the stat64 structure layout compatible with
with the one used by the kernel on most other 64 bit architecture that
implement it (ia64, parisc, powerpc, and sparc), but in the end
decided to stay with the one that was traditionally defined in
the alpha headers but not used, since this is also what glibc
exposes to user space.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most architectures define system call numbers for the rseq and pkey system
calls, even when they don't support the features, and perhaps never will.
Only a few architectures are missing these, so just define them anyway
for consistency. If we decide to add them later to one of these, the
system call numbers won't get out of sync then.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
The IPC system call handling is highly inconsistent across architectures,
some use sys_ipc, some use separate calls, and some use both. We also
have some architectures that require passing IPC_64 in the flags, and
others that set it implicitly.
For the addition of a y2038 safe semtimedop() system call, I chose to only
support the separate entry points, but that requires first supporting
the regular ones with their own syscall numbers.
The IPC_64 is now implied by the new semctl/shmctl/msgctl system
calls even on the architectures that require passing it with the ipc()
multiplexer.
I'm not adding the new semtimedop() or semop() on 32-bit architectures,
those will get implemented using the new semtimedop_time64() version
that gets added along with the other time64 calls.
Three 64-bit architectures (powerpc, s390 and sparc) get semtimedop().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.
For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.
The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.
As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.
A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
__kernel_timespec and timespec are currently the same type, but once
they are different, the type cast has to be changed here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When I merged this patch, the file was accidentally left intact
instead of being removed, which means any changes to syscall.tbl
have no effect.
Fixes: 2b3c5a99d5 ("sh: generate uapi header and syscall table header files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most architectures have assigned a numbers for the seccomp syscall
even when they do not implement it.
m68k is an exception here, so for consistency lets add the number.
Unless CONFIG_SECCOMP is implemented, the system call just
returns -ENOSYS.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of architectures including arm64 already implement the
kexec_file_load system call, on many others we have assigned a system
call number for it, but not implemented it yet.
Adding the number in arch/arm/ lets us use the system call on arm64
systems in compat mode, and also reduces the number of differences
between architectures. If we want to implement kexec_file_load on ARM
in the future, the number assignment means that kexec tools can already
be built with the now current set of kernel headers.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The migrate_pages system call has an assigned number on all architectures
except ARM. When it got added initially in commit d80ade7b32 ("ARM:
Fix warning: #warning syscall migrate_pages not implemented"), it was
intentionally left out based on the observation that there are no 32-bit
ARM NUMA systems.
However, there are now arm64 NUMA machines that can in theory run 32-bit
kernels (actually enabling NUMA there would require additional work)
as well as 32-bit user space on 64-bit kernels, so that argument is no
longer very strong.
Assigning the number lets us use the system call on 64-bit kernels as well
as providing a more consistent set of syscalls across architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Other architectures commonly use __NR_umount2 for sys_umount,
only ia64 and alpha use __NR_umount here. In order to synchronize
the generated tables, use umount2 like everyone else, and add back
the old name from asm/unistd.h for compatibility.
For shmat, alpha uses the osf_shmat name, we can do the same thing
here, which means we don't have to add an entry in the __IGNORE
list now that shmat is mandatory everywhere
alarm, creat, pause, time, and utime are optional everywhere
these days, no need to list them here any more.
I considered also adding the regular versions of the get*id system
calls that have different names and calling conventions on alpha,
which would further help unify the syscall ABI, but for now
I decided against that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The io_pgetevents system call was added in linux-4.18 but has
no entry for alpha:
warning: #warning syscall io_pgetevents not implemented [-Wcpp]
Assign a the next system call number here.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most architectures have assigned numbers for both seccomp and
perf_event_open, even when they do not implement either.
ia64 is an exception here, so for consistency lets add numbers for both
of them. Unless CONFIG_PERF_EVENTS and CONFIG_SECCOMP are implemented,
the system calls just return -ENOSYS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Other architectures commonly use __NR_umount2 for sys_umount,
only ia64 and alpha use __NR_umount here. In order to synchronize
the generated tables, use umount2 like everyone else, and add back
the old name from asm/unistd.h for compatibility.
The __IGNORE_* lines are now all obsolete and can be removed as
a side-effect.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that all these wrappers are automatically generated, we can
remove the entire file, and instead point to the regualar syscalls
like all other architectures do.
The 31-bit pointer extension is now handled in the __s390_sys_*()
wrappers.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-6-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Any system call that takes a pointer argument on s390 requires
a wrapper function to do a 31-to-64 zero-extension, these are
currently generated in arch/s390/kernel/compat_wrapper.c.
On arm64 and x86, we already generate similar wrappers for all
system calls in the place of their definition, just for a different
purpose (they load the arguments from pt_regs).
We can do the same thing here, by adding an asm/syscall_wrapper.h
file with a copy of all the relevant macros to override the generic
version. Besides the addition of the compat entry point, these also
rename the entry points with a __s390_ or __s390x_ prefix, similar
to what we do on arm64 and x86. This in turn requires renaming
a few things, and adding a proper ni_syscall() entry point.
In order to still compile system call definitions that pass an
loff_t argument, the __SC_COMPAT_CAST() macro checks for that
and forces an -ENOSYS error, which was the best I could come up
with. Those functions must obviously not get called from user
space, but instead require hand-written compat_sys_*() handlers,
which fortunately already exist.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-5-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390 has an almost identical copy of the code in kernel/uid16.c.
The problem here is that it requires calling the regular system calls,
which the generic implementation handles correctly, but the internal
interfaces are not declared in a global header for this.
The best way forward here seems to be to just use the generic code and
delete the s390 specific implementation.
I keep the changes to uapi/asm/posix_types.h inside of an #ifdef check
so user space does not observe any changes. As some of the system calls
pass pointers, we also need wrappers in compat_wrapper.c, which I add
for all calls with at least one argument. All those wrappers can be
removed in a later step.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The sys_ipc() and compat_ksys_ipc() functions are meant to only
be used from the system call table, not called by another function.
Introduce ksys_*() interfaces for this purpose, as we have done
for many other system calls.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Patch series "s390: rework compat wrapper generation".
As promised, I gave this a go and changed the SYSCALL_DEFINEx()
infrastructure to always include the wrappers for doing the
31-bit argument conversion on s390 compat mode.
This does three main things:
- The UID16 rework saved a lot of duplicated code, and would
probably make sense by itself, but is also required as
we can no longer call sys_*() functions directly after the
last step.
- Removing the compat_wrapper.c file is of course the main
goal here, in order to remove the need to maintain the
compat_wrapper.c file when new system calls get added.
Unfortunately, this requires adding some complexity in
syscall_wrapper.h, and trades a small reduction in source
code lines for a small increase in binary size for
unused wrappers.
- As an added benefit, the use of syscall_wrapper.h now makes
it easy to change the syscall wrappers so they no longer
see all user space register contents, similar to changes
done in commits fa697140f9 ("syscalls/x86: Use 'struct pt_regs'
based syscall calling convention for 64-bit syscalls") and
4378a7d4be ("arm64: implement syscall wrappers").
I leave the actual implementation of this for you, if you
want to do it later.
I did not test the changes at runtime, but I looked at the
generated object code, which seems fine here and includes
the same conversions as before.
This patch(of 5):
The sys_personality function is not meant to be called from other system
calls. We could introduce an intermediate ksys_personality function,
but it does almost nothing, so this just moves the implementation into
the caller.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190116131527.2071570-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software. Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique. Linus Torvalds argued:
"Do we actually need this?
I'd rather let it bitrot, and just let it return random versions. It
will just start again at 2.4.60, won't it?
Anybody who uses UNAME26 for a 5.x kernel might as well think it's
still 4.x. The user space is so old that it can't possibly care about
differences between 4.x and 5.x, can it?
The only thing that matters is that it shows "2.4.<largeenough>",
which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that also
includes a few longer-standing fixes (i.e. not recent regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons (maintainer out
sick, holidays, etc). There's a functional dependency in there such that
one platform (Altera's SoCFPGA) won't boot without one of the patches;
instead of reverting the patch that got merged, I looked at this set
and decided it was small enough that I'll pick it up anyway. If you
disagree I can revisit with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved
memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board, what
this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
+ A few more fixlets.
-----BEGIN PGP SIGNATURE-----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=qjfZ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
-----BEGIN PGP SIGNATURE-----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=aCB2
-----END PGP SIGNATURE-----
Merge tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two regression fixes in clone/dedupe ioctls, the generic check
callback needs to lock extents properly and wait for io to avoid
problems with writeback and relocation
- fix deadlock when using free space tree due to block group creation
- a recently added check refuses a valid fileystem with seeding device,
make that work again with a quickfix, proper solution needs more
intrusive changes
* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Use real device structure to verify dev extent
Btrfs: fix deadlock when using free space tree due to block group creation
Btrfs: fix race between reflink/dedupe and relocation
Btrfs: fix race between cloning range ending at eof and writeback
Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an
email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel is
moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise it
should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsRFA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbgACfTY/rAZpWTgMdPDfoOmF+s/XHQXsAoJKZ+v+f
Tpkcw76Wo1ESpPLuT1u1
=W0D+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
an email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel
is moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise
it should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues"
* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: driver core: remove use of BUS_ATTR
sysfs: convert BUG_ON to WARN_ON
Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix up
some reported issues in the rtl8188eu driver and update the MAINTAINERS
file to point to Larry for this driver so he can get the bug reports
easier.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsPnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ympdgCfVGVVapWxNgyjKe0oZNFQpF+bMAsAoNXmPbcd
8ETJe7SzfNH6mjmnw80F
=LZmR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix
up some reported issues in the rtl8188eu driver and update the
MAINTAINERS file to point to Larry for this driver so he can get the
bug reports easier.
All have been in linux-next with no reported issues"
* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
MAINTAINERS: Add entry for staging driver r8188eu
Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed up
in 5.0-rc1. The second one resolves a number of reported issues with
the recent tty locking fixes that went into 5.0-rc1. Lots of people
have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsOzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8OACgg3KREaqF3vizmxVr3xzKk2xG7x0An28XJcYA
z95ZRO/BuSATH1kTM36D
=p+SA
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed
up in 5.0-rc1. The second one resolves a number of reported issues
with the recent tty locking fixes that went into 5.0-rc1. Lots of
people have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues"
* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
serial: lantiq: Do not swap register read/writes
Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsQMA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykM2wCgzC1E5NUpoCqPZHaYQ/0LNLm6SaEAoIbebWBo
rl39FeUBmPJLTmKD0pFX
=4K55
-----END PGP SIGNATURE-----
Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues"
* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: storage: Remove outdated URL from MAINTAINERS
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
usbcore: Select only first configuration for non-UAC3 compliant devices
USB: storage: add quirk for SMI SM3350
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
-----BEGIN PGP SIGNATURE-----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=410H
-----END PGP SIGNATURE-----
Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
fix an important set of crediting (flow control) problems, and also
two problems in cifs_writepages, ddressing some large i/o and also
compounding issues"
* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
CIFS: Fix error paths in writeback code
CIFS: Move credit processing to mid callbacks for SMB3
CIFS: Fix credits calculation for cancelled requests
cifs: Fix potential OOB access of lock element array
cifs: Limit memory used by lock request calls to a page
cifs: move large array from stack to heap
CIFS: Do not hide EINTR after sending network packets
CIFS: Fix credit computation for compounded requests
CIFS: Do not set credits to 1 if the server didn't grant anything
CIFS: Fix adjustment of credits for MTU requests
cifs: Fix a tiny potential memory leak
cifs: Fix a debug message
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXDTOiBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwMnMAP9u9pJr0g6t/8NwiDNQGYIupFMQ
vH3hIUP7pwkELeN36AEAuFJG66r1Y96icDQCLn9x6vxwgTDmJGgGHM3CWEftsQI=
=vFwq
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXDjK7AAKCRALBhiOFHI7
1eZfAJ0X/MrjG/MB1NSlJ2kUGmBs5MnnswCdFZpNF4okkjtwyWoCoBsp9X3kUkw=
=vYNz
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 5.0
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
-----BEGIN PGP SIGNATURE-----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=KT88
-----END PGP SIGNATURE-----
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes
Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add required includes into qcom_scm.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v8pH
-----END PGP SIGNATURE-----
Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Qualcomm Driver Fixes for 5.0-rc1
* Add required includes into qcom_scm.h
* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
qcom-scm: Include <linux/err.h> header
Signed-off-by: Olof Johansson <olof@lixom.net>
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iyBf
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlw3Gy4ACgkQ189kaWo3
T75DKw/+O/3Tes6jMnBgw+QdSKuN0o1Ivmrs0BktpRtqOM6b0WUbSC3Jf3DkRece
IwJSoDjS378rMciLkl/oBLTzTpTBqWN5aYg4nbcCbTETFTHULOo7AFNiJ6JYlS1T
IrrtNxGqfxw76rcc7TjZ7KEh+tffXMii8BOHXXJXxBzt+t26SQbnrKjK63pmFBig
gbGQNjFSwt7g0l/hghHArGLw5BVZOyEyFcdKyX2zRVu6amMohKH1o+Olx4pcpGUf
bx0NdCpFUZumNCk62A4avSoLZ6hprodd7JhKGLPEoGWtIKZN601w1ckpmxW87T3U
r2TklTsAjRjE67srAp7Ib269mJq7PFaZdw3sL7wt4BUS+dP0mihOIhMUqQZKo0On
FgQauoGbWGR2vzVHYlU/cahMEqfOeU24pJ9s5e/zSKNKQMVqTRe+F4f/FHSyhwtX
z3b6pv5gfwJYMmjkYDI62z43FsCqc10Q9C5VCT0Z4ezYdJdu22CqxcbdR5XTuca6
m6WDG4R9HRCKQgB2G7sjqtSZfCP0coTA9nNBT2nH6dh7jFaiFNstQdlVcSLwlXI0
hfuoymFi/nCdIIO70ASId6t5h80/mAmE6nk/QL7M0GLi1hplWbSDVOez9Atx6YGz
PcQvdQf27el6K66R4AzmkmTImMCKOl/xwpycz4niTqFUpnT7nTI=
=zkaU
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v5.0
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 49e54187ae ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
Fixes: 49e54187ae ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=OFV3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, with little fixes all over the map
- Loop caching fix for offset/bs change (Jaegeuk Kim)
- Block documentation tweaks (Jeff, Jon, Weiping, John)
- null_blk zoned tweak (John)
- ahch mvebu suspend/resume support. Should have gone into the merge
window, but there was some confusion on which tree had it. (Miquel)
* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
ata: ahci: mvebu: remove stale comment
ata: libahci_platform: comply to PHY framework
loop: drop caches if offset or block_size are changed
block: fix kerneldoc comment for blk_attempt_plug_merge()
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
block: doc: add slice_idle_us to bfq documentation
block: clarify documentation for blk_{start|finish}_plug
...
We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major architectures
like x86 and arm have always zeroed allocations from dma_alloc_coherent,
but a couple other architectures were missing that zeroing either always
or in corner cases. Then later we grew anothe dma_zalloc_coherent
interface to explicitly request zeroing, but that just added __GFP_ZERO
to the allocation flags, which for some allocators that didn't end
up using the page allocator ended up being a no-op and still not
zeroing the allocations.
So for this merge window I fixed up all remaining architectures to zero
the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op
wrapper around dma_alloc_coherent, which fixes all of the above issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue.
-----BEGIN PGP SIGNATURE-----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=VIBB
-----END PGP SIGNATURE-----
Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
Minor fixes for new code, corner cases, and documentation.
Patches are isolated and sufficiently described by the shortlog.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj/xJEkTHTJzZE/FJQP/qGw8qh+gFAlw52x0ACgkQQP/qGw8q
h+iejgf+NjD3jXCYAxLtGInXyQEwqw113Gr8941oC2E50CifTqrFhWNkRgl+GyCS
x92SCiNS1xpy+SnUZDj63MjsB90zOOogPG+RYsSE+BAN/i/9IiE2F5aYSXlen0rR
SOOfraQTDlS5rOp9auGMNlNWkmEKCO6YEsdmlNte/QVNuy4vrHfAJDvdfCUiC0qO
XJWMjIyZElsKJUtmZzKuTrCZniBvqn6yGH+/0kggrzDPPIHU+M7qSkMkAC7wqrFy
0zaeKNloArFLKlDQPQ3AykgxCrp6CJnXuR/Oo6R5rn9jF2kVdlzglx7pHBAc5OGp
wI+VDWRA2x2JevWcIdsN2Xp2vaCRGw==
=L1zP
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
Documentation/virtual/kvm: Update URL for AMD SEV API specification
KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
kvm: sev: Fail KVM_SEV_INIT if already initialized
KVM: validate userspace input in kvm_clear_dirty_log_protect()
KVM: x86: Fix bit shifting in update_intel_pt_cfg
nouveau:
one backlight, falcon register access, and a fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs.
- Fix lockdep warning in the atomic ioctl and setproperty.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAlw5IEcACgkQTA9ye/CY
qnFrLw/9G9cEKiM9ZPspa5ovEi1S1lwUaKD5JWJckaLzbNIkDFDpfbV0X8An+IOt
L0Db/cdtsBZ67Ci+QrUk60Zy36dFRChDafCP41U2nZtn5iel9v474fys13ZFwtWa
znyvb5trPEB+76Sc3YDQuK2Aapr/NDowm993qkCJq8euQboFI6jfC7Ib/+zrsZjz
7OErdKVSkxPT8hEeQq6DkuB0hDMCvb9V/Gu0pzYn+Tb5ECl6ZTSSjf4bxhQ8qG6x
P+rPQLcymgG+OhYuHn19rh1Y/3NPJnDN4lgZ5HOKVyvKIfjLGuZwriZ5e53sbgWw
sjBD/9tSHSSRH3Taj4yVWw/XcwIH9YnUmaMAPe35bQmweYjMILlrkWEIGC+g4loi
aebq66x2LWZ4tqiGu5flNfXPnLYJqnvaA8z4vEPdtwAN/JsrbRD3lUWkVV5Ydvdq
KFQnrzCXuDWf8UjmW70utvkW+pxK155Xb/3IqivF8tpoz+jC+NeXqp7cts9gOJkj
UZv842gymFJ0yQ3ZhjFJKc2aAe2eKtq8lJiCDzVA0uwg2ddebi2ttJTo6rH9ze58
XEhywCGptMKOOYsCDzzkqAGNTkOajd88d1/HCrwWeHW6SIfEfHPsYliC6O9ZzgLM
xO1/JGF7PrlggtzM+rffVgh2lVFKQxErUZkPPkecUj42XjnX+is=
=7xM2
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)
Since Dave's already in weekend mode and it was quite a few patches I
figured better to apply all the pulls and forward them to you. Hence
here 2nd part of bugfixes for -rc2.
nouveau:
- backlight fix
- falcon register access fix
- fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs
- Fix lockdep warning in the atomic ioctl and setproperty"
* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/falcon: avoid touching registers if engine is off
drm/nouveau: Don't disable polling in fallback mode
drm/nouveau: register backlight on pascal and newer
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
drm/i915: init per-engine WAs for all engines
drm/i915: Unwind failure on pinning the gen7 ppgtt
drm/i915: Skip the ERR_PTR error state
drm/i915: Disable PSR in Apple panels
gpu/drm: Fix lock held when returning to user space.
drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
drm/i915/gvt: Fix workload request allocation before request add
