After commit 63d0434 ("KVM: x86: move kvm_create_vcpu_debugfs after
last failure point") we are creating the pre-vCPU debugfs files
after the creation of the vCPU file descriptor. This makes it
possible for userspace to reach kvm_vcpu_release before
kvm_create_vcpu_debugfs has finished. The vcpu->debugfs_dentry
then does not have any associated inode anymore, and this causes
a NULL-pointer dereference in debugfs_create_file.
The solution is simply to avoid removing the files; they are
cleaned up when the VM file descriptor is closed (and that must be
after KVM_CREATE_VCPU returns). We can stop storing the dentry
in struct kvm_vcpu too, because it is not needed anywhere after
kvm_create_vcpu_debugfs returns.
Reported-by: syzbot+705f4401d5a93a59b87d@syzkaller.appspotmail.com
Fixes: 63d0434837 ("KVM: x86: move kvm_create_vcpu_debugfs after last failure point")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
-----BEGIN PGP SIGNATURE-----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=aD+9
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.8:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
The userspace_addr alignment and range checks are not performed for private
memory slots that are prepared by KVM itself. This is unnecessary and makes
it questionable to use __*_user functions to access memory later on. We also
rely on the userspace address being aligned since we have an entire family
of functions to map gfn to pfn.
Fortunately skipping the check is completely unnecessary. Only x86 uses
private memslots and their userspace_addr is obtained from vm_mmap,
therefore it must be below PAGE_OFFSET. In fact, any attempt to pass
an address above PAGE_OFFSET would have failed because such an address
would return true for kvm_is_error_hva.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If two page ready notifications happen back to back the second one is not
delivered and the only mechanism we currently have is
kvm_check_async_pf_completion() check in vcpu_run() loop. The check will
only be performed with the next vmexit when it happens and in some cases
it may take a while. With interrupt based page ready notification delivery
the situation is even worse: unlike exceptions, interrupts are not handled
immediately so we must check if the slot is empty. This is slow and
unnecessary. Introduce dedicated MSR_KVM_ASYNC_PF_ACK MSR to communicate
the fact that the slot is free and host should check its notification
queue. Mandate using it for interrupt based 'page ready' APF event
delivery.
As kvm_check_async_pf_completion() is going away from vcpu_run() we need
a way to communicate the fact that vcpu->async_pf.done queue has
transitioned from empty to non-empty state. Introduce
kvm_arch_async_page_present_queued() and KVM_REQ_APF_READY to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An innocent reader of the following x86 KVM code:
bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
{
if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED))
return true;
...
may get very confused: if APF mechanism is not enabled, why do we report
that we 'can inject async page present'? In reality, upon injection
kvm_arch_async_page_present() will check the same condition again and,
in case APF is disabled, will just drop the item. This is fine as the
guest which deliberately disabled APF doesn't expect to get any APF
notifications.
Rename kvm_arch_can_inject_async_page_present() to
kvm_arch_can_dequeue_async_page_present() to make it clear what we are
checking: if the item can be dequeued (meaning either injected or just
dropped).
On s390 kvm_arch_can_inject_async_page_present() always returns 'true' so
the rename doesn't matter much.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 5b494aea13.
If unlocked==true then the vma pointer could be invalidated, so the 2nd
follow_pfn() is potentially racy: we do need to get out and redo
find_vma_intersection().
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the 32bit KVM/arm host is a distant memory, let's move the
whole of the KVM/arm64 code into the arm64 tree.
As they said in the song: Welcome Home (Sanitarium).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200513104034.74741-1-maz@kernel.org
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While optimizing posted-interrupt delivery especially for the timer
fastpath scenario, I measured kvm_x86_ops.deliver_posted_interrupt()
to introduce substantial latency because the processor has to perform
all vmentry tasks, ack the posted interrupt notification vector,
read the posted-interrupt descriptor etc.
This is not only slow, it is also unnecessary when delivering an
interrupt to the current CPU (as is the case for the LAPIC timer) because
PIR->IRR and IRR->RVI synchronization is already performed on vmentry
Therefore skip kvm_vcpu_trigger_posted_interrupt in this case, and
instead do vmx_sync_pir_to_irr() on the EXIT_FASTPATH_REENTER_GUEST
fastpath as well.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-6-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hva_to_pfn_remapped() calls fixup_user_fault(), which has already
handled the retry gracefully. Even if "unlocked" is set to true, it
means that we've got a VM_FAULT_RETRY inside fixup_user_fault(),
however the page fault has already retried and we should have the pfn
set correctly. No need to do that again.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200416155906.267462-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
virt/kvm/eventfd.c:724:38-43: WARNING: conversion to bool not needed
here
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Message-Id: <20200420123805.4494-1-yanaijie@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of any sort of waitqueue (simple or regular) for
wait/waking vcpus has always been an overkill and semantically
wrong. Because this is per-vcpu (which is blocked) there is
only ever a single waiting vcpu, thus no need for any sort of
queue.
As such, make use of the rcuwait primitive, with the following
considerations:
- rcuwait already provides the proper barriers that serialize
concurrent waiter and waker.
- Task wakeup is done in rcu read critical region, with a
stable task pointer.
- Because there is no concurrency among waiters, we need
not worry about rcuwait_wait_event() calls corrupting
the wait->task. As a consequence, this saves the locking
done in swait when modifying the queue. This also applies
to per-vcore wait for powerpc kvm-hv.
The x86 tscdeadline_latency test mentioned in 8577370fb0
("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg,
latency is reduced by around 15-20% with this change.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-mips@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <20200424054837.5138-6-dave@stgolabs.net>
[Avoid extra logic changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows making request to all other vcpus except the one
specified in the parameter.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-2-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.
Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.
Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
userspace, and that PSTATE indicates a 32bit mode.
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM now expects to be able to use HW-accelerated delivery of vSGIs
as soon as the guest has enabled thm. Unfortunately, we only
initialize the GICv4 context if we have a virtual ITS exposed to
the guest.
Fix it by always initializing the GICv4.1 context if it is
available on the host.
Fixes: 2291ff2f2a ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor")
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM_CAP_HALT_POLL is a per-VM capability that lets userspace
control the halt-polling time, allowing halt-polling to be tuned or
disabled on particular VMs.
With dynamic halt-polling, a VM's VCPUs can poll from anywhere from
[0, halt_poll_ns] on each halt. KVM_CAP_HALT_POLL sets the
upper limit on the poll time.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200417221446.108733-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we're going to fail out the vgic_add_lpi(), let's make sure the
allocated vgic_irq memory is also freed. Though it seems that both
cases are unlikely to fail.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200414030349.625-3-yuzenghui@huawei.com
It's likely that the vcpu fails to handle all virtual interrupts if
userspace decides to destroy it, leaving the pending ones stay in the
ap_list. If the un-handled one is a LPI, its vgic_irq structure will
be eventually leaked because of an extra refcount increment in
vgic_queue_irq_unlock().
This was detected by kmemleak on almost every guest destroy, the
backtrace is as follows:
unreferenced object 0xffff80725aed5500 (size 128):
comm "CPU 5/KVM", pid 40711, jiffies 4298024754 (age 166366.512s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 01 a9 73 6d 80 ff ff ...........sm...
c8 61 ee a9 00 20 ff ff 28 1e 55 81 6c 80 ff ff .a... ..(.U.l...
backtrace:
[<000000004bcaa122>] kmem_cache_alloc_trace+0x2dc/0x418
[<0000000069c7dabb>] vgic_add_lpi+0x88/0x418
[<00000000bfefd5c5>] vgic_its_cmd_handle_mapi+0x4dc/0x588
[<00000000cf993975>] vgic_its_process_commands.part.5+0x484/0x1198
[<000000004bd3f8e3>] vgic_its_process_commands+0x50/0x80
[<00000000b9a65b2b>] vgic_mmio_write_its_cwriter+0xac/0x108
[<0000000009641ebb>] dispatch_mmio_write+0xd0/0x188
[<000000008f79d288>] __kvm_io_bus_write+0x134/0x240
[<00000000882f39ac>] kvm_io_bus_write+0xe0/0x150
[<0000000078197602>] io_mem_abort+0x484/0x7b8
[<0000000060954e3c>] kvm_handle_guest_abort+0x4cc/0xa58
[<00000000e0d0cd65>] handle_exit+0x24c/0x770
[<00000000b44a7fad>] kvm_arch_vcpu_ioctl_run+0x460/0x1988
[<0000000025fb897c>] kvm_vcpu_ioctl+0x4f8/0xee0
[<000000003271e317>] do_vfs_ioctl+0x160/0xcd8
[<00000000e7f39607>] ksys_ioctl+0x98/0xd8
Fix it by retiring all pending LPIs in the ap_list on the destroy path.
p.s. I can also reproduce it on a normal guest shutdown. It is because
userspace still send LPIs to vcpu (through KVM_SIGNAL_MSI ioctl) while
the guest is being shutdown and unable to handle it. A little strange
though and haven't dig further...
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: moved the distributor deallocation down to avoid an UAF splat]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200414030349.625-2-yuzenghui@huawei.com
There is no point in accessing the HW when writing to any of the
ISPENDR/ICPENDR registers from userspace, as only the guest should
be allowed to change the HW state.
Introduce new userspace-specific accessors that deal solely with
the virtual state. Note that the API differs from that of GICv3,
where userspace exclusively uses ISPENDR to set the state. Too
bad we can't reuse it.
Fixes: 82e40f558d ("KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no point in accessing the HW when writing to any of the
ISENABLER/ICENABLER registers from userspace, as only the guest
should be allowed to change the HW state.
Introduce new userspace-specific accessors that deal solely with
the virtual state.
Reported-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a guest tries to read the active state of its interrupts,
we currently just return whatever state we have in memory. This
means that if such an interrupt lives in a List Register on another
CPU, we fail to obsertve the latest active state for this interrupt.
In order to remedy this, stop all the other vcpus so that they exit
and we can observe the most recent value for the state. This is
similar to what we are doing for the write side of the same
registers, and results in new MMIO handlers for userspace (which
do not need to stop the guest, as it is supposed to be stopped
already).
Reported-by: Julien Grall <julien@xen.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a nested page fault is taken from an address that does not have
a memslot associated to it, kvm_mmu_do_page_fault returns RET_PF_EMULATE
(via mmu_set_spte) and kvm_mmu_page_fault then invokes svm_need_emulation_on_page_fault.
The default answer there is to return false, but in this case this just
causes the page fault to be retried ad libitum. Since this is not a
fast path, and the only other case where it is taken is an erratum,
just stick a kvm_vcpu_gfn_to_memslot check in there to detect the
common case where the erratum is not happening.
This fixes an infinite loop in the new set_memory_region_test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In earlier versions of kvm, 'kvm_run' was an independent structure
and was not included in the vcpu structure. At present, 'kvm_run'
is already included in the vcpu structure, so the parameter
'kvm_run' is redundant.
This patch simplifies the function definition, removes the extra
'kvm_run' parameter, and extracts it from the 'kvm_vcpu' structure
if necessary.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Message-Id: <20200416051057.26526-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new function kvm_is_visible_memslot() and use it from
kvm_is_visible_gfn(); use the new function in try_async_pf() too,
to avoid an extra memslot lookup.
Opportunistically squish a multi-line comment into a single-line comment.
Note, the end result, KVM_PFN_NOSLOT, is unchanged.
Cc: Jim Mattson <jmattson@google.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The placement of kvm_create_vcpu_debugfs is more or less irrelevant, since
it cannot fail and userspace should not care about the debugfs entries until
it knows the vcpu has been created. Moving it after the last failure
point removes the need to remove the directory when unwinding the creation.
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20200331224222.393439-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implementing (and even advertising) 64bit PSCI functions to 32bit
guests is at least a bit odd, if not altogether violating the
spec which says ("5.2.1 Register usage in arguments and return values"):
"Adherence to the SMC Calling Conventions implies that any AArch32
caller of an SMC64 function will get a return code of 0xFFFFFFFF(int32).
This matches the NOT_SUPPORTED error code used in PSCI"
Tighten the implementation by pretending these functions are not
there for 32bit guests.
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a guest delibarately uses an SMC32 function number (which is allowed),
we should make sure we drop the top 32bits from the input arguments, as they
could legitimately be junk.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The variable r is being assigned with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200410113526.13822-1-colin.king@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When deciding whether a guest has to be stopped we check whether this
is a private interrupt or not. Unfortunately, there's an off-by-one bug
here, and we fail to recognize a whole range of interrupts as being
global (GICv2 SPIs 32-63).
Fix the condition from > to be >=.
Cc: stable@vger.kernel.org
Fixes: abd7229626 ("KVM: arm/arm64: Simplify active_change_prepare and plug race")
Reported-by: André Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reset the LRU slot if it becomes invalid when deleting a memslot to fix
an out-of-bounds/use-after-free access when searching through memslots.
Explicitly check for there being no used slots in search_memslots(), and
in the caller of s390's approximation variant.
Fixes: 36947254e5 ("KVM: Dynamically size memslot array based on number of used slots")
Reported-by: Qian Cai <cai@lca.pw>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.
For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.
In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.
Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org
As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Drop largepages_enabled, kvm_largepages_enabled() and
kvm_disable_largepages() now that all users are gone.
Note, largepages_enabled was an x86-only flag that got left in common
KVM code when KVM gained support for multiple architectures.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers. linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the memslot logic doesn't assume memslots are always non-NULL,
dynamically size the array of memslots instead of unconditionally
allocating memory for the maximum number of memslots.
Note, because a to-be-deleted memslot must first be invalidated, the
array size cannot be immediately reduced when deleting a memslot.
However, consecutive deletions will realize the memory savings, i.e.
a second deletion will trim the entry.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
