* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix microcode driver newly spewing warnings
x86, PAT: Remove page granularity tracking for vm_insert_pfn maps
x86: disable X86_PTRACE_BTS for now
x86, documentation: kernel-parameters replace X86-32,X86-64 with X86
x86: pci-swiotlb.c swiotlb_dma_ops should be static
x86, PAT: Remove duplicate memtype reserve in devmem mmap
x86, PAT: Consolidate code in pat_x_mtrr_type() and reserve_memtype()
x86, PAT: Changing memtype to WC ensuring no WB alias
x86, PAT: Handle faults cleanly in set_memory_ APIs
x86, PAT: Change order of cpa and free in set_memory_wb
x86, CPA: Change idmap attribute before ioremap attribute setup
* 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: UV BAU distribution and payload MMRs
x86: UV: BAU partition-relative distribution map
x86, uv: add Kconfig dependency on NUMA for UV systems
x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems
x86, UV: Fix for nodes with memory and no cpus
x86, UV: system table in bios accessed after unmap
x86: UV BAU messaging timeouts
x86: UV BAU and nodes with no memory
Jeff Garzik reported this WARN_ON() noise:
> Kernel: 2.6.30-rc1-00306-g8371f87
> Hardware: ICH10 x86-64
>
> This is a regression from 2.6.29. Microcode spews the following WARNING
> multiple times during boot:
>
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/group.c:138 sysfs_remove_group+0xeb/0xf0()
> Hardware name: sysfs group ffffffffa0209700 not found for
> kobject 'cpu0'
Keep sysfs files around for cpus even when we failed to locate
microcode for them at the moment of module loading. The appropriate
microcode firmware can become available later on.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This change resolves the problem of too many single page entries
in pat_memtype_list and "freeing invalid memtype" errors with i915,
reported here:
http://marc.info/?l=linux-kernel&m=123845244713183&w=2
Remove page level granularity track and untrack of vm_insert_pfn.
memtype tracking at page granularity does not scale and cleaner
approach would be for the driver to request a type for a bigger
IO address range or PCI io memory range for that device, either at
mmap time or driver init time and just use that type during
vm_insert_pfn.
This patch just removes the track/untrack of vm_insert_pfn. That
means we will be in same state as 2.6.28, with respect to these APIs.
Newer APIs for the drivers to request a memtype for a bigger region
is coming soon.
[ Impact: fix Xorg startup warnings and hangs ]
Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Tested-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20090408223716.GC3493@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch correctly sets BAU memory mapped registers to point
to the sending activation descriptor table and target payload table.
The "Broadcast Assist Unit" is used for TLB shootdown in UV.
The memory mapped registers that point to sending and receiving
memory structures contain node numbers.
In one case the __pa() function did not provide the node id of
memory on blade zero in configurations where that id is nonzero.
In another case, it was assumed that memory was allocated on
the local node. That assumption is not true in a configuration
in which the node has no memory.
Tested on the UV hardware simulator.
[ Impact: fix possible runtime crash due to incorrect TLB logic ]
Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1LuR5Z-0007An-B8@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Oleg Nesterov found a couple of races in the ptrace-bts code
and fixes are queued up for it but they did not get ready in time
for the merge window. We'll merge them in v2.6.31 - until then
mark the feature as CONFIG_BROKEN. There's no user-space yet
making use of this so it's not a big issue.
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It turns out that 'smp_call_function_many()' doesn't work at all like
'smp_call_function_single()', and my change to Andrew's patch to use it
rather than a loop over all CPU's acpi-cpufreq doesn't work.
My bad.
'smp_call_function_many()' has two "features" (aka "documented bugs"):
(a) it needs to be called with preemption disabled, because it uses
smp_processor_id() without guarding the CPU lookup with 'get_cpu()'
and 'put_cpu()' like the 'single' variant does.
(b) even if the current CPU is part of the CPU mask, it won't do the
call on that CPU.
Still, we're better off trying to use 'smp_call_function_many()' than
looping over CPU's, since it at least in theory allows us to use a
broadcast IPI and do it all in parallel. So let's just work around the
silly semantic bugs in that function.
Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert part of af5c820a31 ("x86: cpumask:
use work_on_cpu in arch/x86/kernel/microcode_core.c")
That change is causing only one Intel CPU's microcode to be updated e.g.
microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22
where before it announced that also for CPU0 and CPU1 and CPU2.
We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code,
because Intel's request_microcode_user() involves a copy_from_user() from
/sbin/microcode_ctl, which therefore needs to be on that CPU at the time.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables each partition's BAU distribution bit map
to be partition-relative.
The distribution bitmap had been constructed assuming 0 as the base
node number. That construct would not have allowed a total system of
greater than 256 nodes.
It also corrects an error that occurred when the first blade's nasid
was not zero. That nasid was stored as the base node.
The base node number gets added by hardware to the node numbers implied
in the distribution bitmap, resulting in invalid target nasids.
Tested on the UV hardware simulator.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1Ltl0C-0004Ob-37@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We ended up incorrectly using '&cur' instead of '&readin' in the
work_on_cpu() -> smp_call_function_single() transformation in commit
01599fca67 ("cpufreq: use
smp_call_function_[single|many]() in acpi-cpufreq.c").
Andrew explains:
"OK, the acpi tree went and had conflicting changes merged into it after
I'd written the patch and it appears that I incorrectly reverted part
of 18b2646fe3 while fixing the resulting
rejects.
Switching it to `readin' looks correct."
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: reduce kernel size a bit, address sparse warning
Addresses the problem pointed out by this sparse warning:
arch/x86/kernel/pci-swiotlb.c:53:20: warning: symbol 'swiotlb_dma_ops' was not declared. Should it be static?
For x86: swiotlb_dma_ops can be static, because it's not used outside
of pci-swiotlb.c
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1239558861.3938.2.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: add FIX_TEXT_POKE to fixmap
xen: honour VCPU availability on boot
xen: clean up gate trap/interrupt constants
xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
xen: resume interrupts before system devices.
xen/mmu: weaken flush_tlb_other test
xen/mmu: some early pagetable cleanups
Xen: Add virt_to_pfn helper function
x86-64: remove PGE from must-have feature list
xen: mask XSAVE from cpuid
NULL noise: arch/x86/xen/smp.c
xen: remove xen_load_gdt debug
xen: make xen_load_gdt simpler
xen: clean up xen_load_gdt
xen: split construction of p2m mfn tables from registration
xen: separate p2m allocation from setting
xen: disable preempt for leave_lazy_mmu
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: add linux kernel support for YMM state
x86: fix wrong section of pat_disable & make it static
x86: Fix section mismatches in mpparse
x86: fix set_fixmap to use phys_addr_t
x86: Document get_user_pages_fast()
x86, intr-remap: fix eoi for interrupt remapping without x2apic
Atttempting to rid us of the problematic work_on_cpu(). Just use
smp_call_fuction_single() here.
This repairs a 10% sysbench(oltp)+mysql regression which Mike reported,
due to
commit 6b44003e5c
Author: Andrew Morton <akpm@linux-foundation.org>
Date: Thu Apr 9 09:50:37 2009 -0600
work_on_cpu(): rewrite it to create a kernel thread on demand
It seems that the kernel calls these acpi-cpufreq functions at a quite
high frequency.
Valdis Kletnieks also reports that this causes 70-90 forks per second on
his hardware.
Cc: Valdis.Kletnieks@vt.edu
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
[ Made it use smp_call_function_many() instead of looping over cpu's
with smp_call_function_single() - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: save/restore Intel-AVX state properly between tasks
Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing
capability. More about AVX at http://software.intel.com/sites/avx
Add OS support for YMM state management using xsave/xrstor infrastructure
to support AVX.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pat_disable cannot be __cpuinit anymore because it's called from pat_init
and the callchain looks like this:
pat_disable [cpuinit] <- pat_init <- generic_set_all <-
ipi_handler <- set_mtrr <- (other non init/cpuinit functions)
WARNING: arch/x86/mm/built-in.o(.text+0x449e): Section mismatch in reference
from the function pat_init() to the function .cpuinit.text:pat_disable()
The function pat_init() references
the function __cpuinit pat_disable().
This is often because pat_init lacks a __cpuinit
annotation or the annotation of pat_disable is wrong.
Non CONFIG_X86_PAT version of pat_disable is static inline, so this version
can be static too (and there are no callers outside of this file).
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <49DFB055.6070405@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix section mismatch
In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called
and also refers to a function which is in .init section. Thus causes
the first warning. And check_irq_src() also requires an __init,
because it refers to an .init section.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix kprobes crash on 32-bit with RAM above 4G
Use phys_addr_t for receiving a physical address argument
instead of unsigned long. This allows fixmap to handle
pages higher than 4GB on x86-32.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: systemtap-ml <systemtap@sources.redhat.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <49DE3695.6040800@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
/dev/mem mmap code was doing memtype reserve/free for a while now.
Recently we added memtype tracking in remap_pfn_range, and /dev/mem mmap
uses it indirectly. So, we don't need seperate tracking in /dev/mem code
any more. That means another ~100 lines of code removed :-).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212709.085210000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix pat_x_mtrr_type() to use UC_MINUS when the mtrr type return UC. This
is to be consistent with ioremap() and ioremap_nocache() which uses
UC_MINUS.
Consolidate the code such that reserve_memtype() also uses
pat_x_mtrr_type() when the caller doesn't specify any special attribute
(non WB attribute).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212708.939936000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As per SDM, there should not be any aliasing of a WC with any cacheable
type across CPUs. That is if one CPU is changing the identity map
memtype to _WC, no other CPU at the time of this change should not have a
TLB for this page that carries a WB attribute. SDM suggests to make the
page not present. But for that we will have to handle any page faults
that can potentially happen due to these pages being not present.
Other way to deal with this without having any WB mapping is to change
the page first to UC and then to WC. This ensures that we meet the SDM
requirement of no cacheable alais to WC page. This also has same or
lower overhead than marking the page not present and making it present
later.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.797481000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle faults and do proper cleanups in set_memory_*() functions. In
some cases, these functions were not doing proper free on failure paths.
With the changes to tracking memtype of RAM pages in struct page instead
of pat list, we do not need the changes in commits c5e147. This patch
reverts that change.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.653222000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To be free of aliasing due to races, set_memory_* interfaces should
follow ordering of reserving, changing memtype to UC/WC, changing
memtype back to WB followed by free.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.512280000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the identity mapping with the requested attribute first, before
we setup the virtual memory mapping with the new requested attribute.
This makes sure that there is no window when identity map'ed attribute
may disagree with ioremap range on the attribute type.
This also avoids doing cpa on the ioremap'ed address twice (first in
ioremap_page_range and then in ioremap_change_attr using vaddr), and
should improve ioremap performance a bit.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212708.373330000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While better than get_user_pages(), the usage of gupf(),
especially the return values and the fact that it can
potentially only partially pin the range, warranted some
documentation.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: npiggin@suse.de
Cc: akpm@linux-foundation.org
LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To simplify level irq migration in the presence of interrupt-remapping,
Suresh used a virtual vector (io-apic pin number) to eliminate io-apic
RTE modification. Level triggered interrupt will appear as an edge to
the local apic cpu but still as level to the IO-APIC. So in addition to
do the local apic EOI, it still needs to do IO-APIC directed EOI to clear
the remote IRR bit in the IO-APIC RTE. Pls refer to Suresh's patch for
more details (commit 0280f7c416).
Now interrupt remapping is decoupled from x2apic, it also needs to do the
directed EOI for apic. Otherwise, apic interrupts won't work correctly.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Weidong Han <weidong.han@intel.com>
Cc: suresh.b.siddha@intel.com
Cc: dwmw2@infradead.org
Cc: allen.m.kay@intel.com
LKML-Reference: <1239355037-22856-1-git-send-email-weidong.han@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use phys_addr_t for receiving a physical address argument instead of
unsigned long. This allows fixmap to handle pages higher than 4GB on
x86-32.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: cpu_debug remove execute permission
x86: smarten /proc/interrupts output for new counters
x86: DMI match for the Dell DXP061 as it needs BIOS reboot
x86: make 64 bit to use default_inquire_remote_apic
x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes
x86, intel-iommu: fix X2APIC && !ACPI build failure
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: consolidate documents
blktrace: pass the right pointer to kfree()
tracing/syscalls: use a dedicated file header
tracing: append a comma to INIT_FTRACE_GRAPH
It seems by mistake these files got execute permissions so removing it.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1239211186.9037.2.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix build warnings and possibe compat misbehavior on IA64
Building a kernel on ia64 might trigger these ugly build warnings:
CC arch/ia64/ia32/sys_ia32.o
In file included from arch/ia64/ia32/sys_ia32.c:55:
arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined
In file included from include/linux/elf.h:7,
from include/linux/module.h:14,
from include/linux/ftrace.h:8,
from include/linux/syscalls.h:68,
from arch/ia64/ia32/sys_ia32.c:18:
arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition
[...]
sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h
to import the syscalls tracing prototypes.
But including ftrace.h can pull too much things for a low level file,
especially on ia64 where the ia32 private headers conflict with higher
level headers.
Now we isolate the syscall tracing headers in their own lightweight file.
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Davidson <md@google.com>
LKML-Reference: <20090408184058.GB6017@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping
pfns, not mfns.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Some 64-bit machines don't support the NX flag in ptes.
Check for NX before constructing the kernel pagetables.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Impact: fixes crashing bug
There's no particular problem with getting an empty cpu mask,
so just shortcut-return if we get one.
Avoids crash reported by Christophe Saout <christophe@saout.de>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
1. make sure early-allocated ptes are pinned, so they can be later
unpinned
2. don't pin pmd+pud, just make them RO
3. scatter some __inits around
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
PGE may not be available when running paravirtualized, so test the cpuid
bit before using it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE
to be set. This confuses the kernel and it ends up crashing on
an xsetbv instruction.
At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of
cpuid it we can't. This will produce a spurious error from Xen,
but allows us to support XSAVE if/when Xen does.
This also factors out the cpuid mask decisions to boot time.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Fix this sparse warnings:
arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer
arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Remove use of multicall machinery which is unused (gdt loading
is never performance critical). This removes the implicit use
of percpu variables, which simplifies understanding how
the percpu code's use of load_gdt interacts with this code.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Build the p2m_mfn_list_list early with the rest of the p2m table, but
register it later when the real shared_info structure is in place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
When doing very early p2m setting, we need to separate setting
from allocation, so split things up accordingly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xen_mc_flush() requires preemption to be disabled for its own sanity,
so disable it while we're flushing.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Now /proc/interrupts of tip tree has new counters:
PLT: Platform interrupts
Format change of output, as like that by commit:
commit 7a81d9a7da
x86: smarten /proc/interrupts output
should be applied to these new counters too.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restore old behavior
for flat and phys_flat
Signed-off-by: Yinhai Lu <yinghai@kernel.org.
LKML-Reference: <49DCBBF1.8080903@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
