io_wq_flush() is buggy, during cancelation of a flush, the associated
work may be passed to the caller's (i.e. io_uring) @match callback. That
callback is expecting it to be embedded in struct io_kiocb. Cancelation
of internal work probably doesn't make a lot of sense to begin with.
As the flush helper is no longer used, just delete it and the associated
work flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->task_pid for exit cancellation, but we need to ensure it's
cleared to zero for io_req_work_grab_env() to do the right thing. Take
a suggestion from Bart and clear the whole thing, just setting the
function passed in. This makes it more future proof as well.
Fixes: 36282881a7 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper that allows the caller to cancel work based on what mm
it belongs to. This allows io_uring to cancel work from a given
task or thread when it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some work items need this for relative path lookup, make it available
like the other inherited credentials/mm/etc.
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're not consistent in how the file table is grabbed and assigned if we
have a command linked that requires the use of it.
Add ->file_table to the io_op_defs[] array, and use that to determine
when to grab the table instead of having the handlers set it if they
need to defer. This also means we can kill the IO_WQ_WORK_NEEDS_FILES
flag. We always initialize work->files, so io-wq can just check for
that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export a helper to attach to an existing io-wq, rather than setting up
a new one. This is doable now that we have reference counted io_wq's.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.
Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.
Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq assumes that work will complete fast (and not block), so it
doesn't create a new worker when work is enqueued, if we already have
at least one worker running. This is done on the assumption that if work
is running, then it will complete fast.
Add an option to force io-wq to fork a new worker for work queued. This
is signaled by setting IO_WQ_WORK_CONCURRENT on the work item. For that
case, io-wq will create a new worker, even though workers are already
running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not all work can be cancelled, some of it we may need to guarantee
that it runs to completion. Allow the caller to set IO_WQ_WORK_NO_CANCEL
on work that must not be cancelled. Note that the caller work function
must also check for IO_WQ_WORK_NO_CANCEL on work that is marked
IO_WQ_WORK_CANCEL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To avoid going to sleep only to get woken shortly thereafter, spin
briefly for new work upon completion of work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit b18fdf71e0 ("io_uring: simplify io_req_link_next()"),
the io_wq_current_is_worker function is no longer needed, clean it
up.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we're using 40 bytes for the io_wq_work structure, and 16 of
those is the doubly link list node. We don't need doubly linked lists,
we always add to tail to keep things ordered, and any other use case
is list traversal with deletion. For the deletion case, we can easily
support any node deletion by keeping track of the previous entry.
This shrinks io_wq_work to 32 bytes, and subsequently io_kiock from
io_uring to 216 to 208 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently pass in 4 arguments outside of the bounded size. In
preparation for adding one more argument, let's bundle them up in
a struct to make it more readable.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we find new work to process within the work handler, we queue the
linked timeout before we have issued the new work. This can be
problematic for very short timeouts, as we have a window where the new
work isn't visible.
Allow the work handler to store a callback function for this in the work
item, and flag it with IO_WQ_WORK_CB if the caller has done so. If that
is set, then io-wq will call the callback when it has setup the new work
item.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For cancellation, we need to ensure that the work item stays valid for
as long as ->cur_work is valid. Right now we can't safely dereference
the work item even under the wqe->lock, because while the ->cur_work
pointer will remain valid, the work could be completing and be freed
in parallel.
Only invoke ->get/put_work() on items we know that the caller queued
themselves. Add IO_WQ_WORK_INTERNAL for io-wq to use, which is needed
when we're queueing a flush item, for instance.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we switched to io-wq, the dependent link optimization for when to
pass back work inline has been broken. Fix this by providing a suitable
io-wq helper for io_uring to use to detect when to do this.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring supports request types that basically have two different
lifetimes:
1) Bounded completion time. These are requests like disk reads or writes,
which we know will finish in a finite amount of time.
2) Unbounded completion time. These are generally networked IO, where we
have no idea how long they will take to complete. Another example is
POLL commands.
This patch provides support for io-wq to handle these differently, so we
don't starve bounded requests by tying up workers for too long. By default
all work is bounded, unless otherwise specified in the work item.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for IORING_OP_ASYNC_CANCEL, which will attempt to
cancel requests that have been punted to async context and are now
in-flight. This works for regular read/write requests to files, as
long as they haven't been started yet. For socket based IO (or things
like accept4(2)), we can cancel work that is already running as well.
To cancel a request, the sqe must have ->addr set to the user_data of
the request it wishes to cancel. If the request is cancelled
successfully, the original request is completed with -ECANCELED
and the cancel request is completed with a result of 0. If the
request was already running, the original may or may not complete
in error. The cancel request will complete with -EALREADY for that
case. And finally, if the request to cancel wasn't found, the cancel
request is completed with -ENOENT.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for adding opcodes that need to add new files
in a process file table, system calls like open(2) or accept4(2).
If an opcode needs this, it must set IO_WQ_WORK_NEEDS_FILES in the work
item. If work that needs to get punted to async context have this
set, the async worker will assume the original task file table before
executing the work.
Note that opcodes that need access to the current files of an
application cannot be done through IORING_SETUP_SQPOLL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:
- We can assign memory context smarter and more persistently if we
manage the life time of threads.
- We can drop various work-arounds we have in io_uring, like the
async_list.
- We can implement hashed work insertion, to manage concurrency of
buffered writes without needing a) an extra workqueue, or b)
needlessly making the concurrency of said workqueue very low
which hurts performance of multiple buffered file writers.
- We can implement cancel through signals, for cancelling
interruptible work like read/write (or send/recv) to/from sockets.
- We need the above cancel for being able to assign and use file tables
from a process.
- We can implement a more thorough cancel operation in general.
- We need it to move towards a syslet/threadlet model for even faster
async execution. For that we need to take ownership of the used
threads.
This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.
io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
