Make sysfs_dirent->s_active an atomic_t instead of rwsem. This
reduces the size of sysfs_dirent from 136 to 104 on 64bit and from 76
to 60 on 32bit with lock debugging turned off. With lock debugging
turned on the reduction is much larger.
s_active starts at zero and each active reference increments s_active.
Putting a reference decrements s_active. Deactivation subtracts
SD_DEACTIVATED_BIAS which is currently INT_MIN and assumed to be small
enough to make s_active negative. If s_active is negative,
sysfs_get() no longer grants new references. Deactivation succeeds
immediately if there is no active user; otherwise, it waits using a
completion for the last put.
Due to the removal of lockdep tricks, this change makes things less
trickier in release_sysfs_dirent(). As all the complexity is
contained in three s_active functions, I think it's more readable this
way.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These functions are about to receive more complexity and doesn't
really need to be inlined in the first place. Move them from
fs/sysfs/sysfs.h to fs/sysfs/dir.c.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
After dentry is reclaimed, sysfs always used to allocate new dentry
and inode if the file is accessed again. This causes problem with
operations which only pin the inode. For example, if inotify watch is
added to a sysfs file and the dentry for the file is reclaimed, the
next update event creates new dentry and new inode making the inotify
watch miss all the events from there on.
This patch fixes it by using iget_locked() instead of new_inode().
sysfs_new_inode() is renamed to sysfs_get_inode() and inode is
initialized iff the inode is newly allocated. sysfs_instantiate() is
responsible for unlocking new inodes.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorganize/clean up sysfs_new_inode() and sysfs_create().
* sysfs_init_inode() is separated out from sysfs_new_inode() and is
responsible for basic initialization.
* sysfs_instantiate() replaces the last step of sysfs_create() and is
responsible for dentry instantitaion.
* type-specific initialization is moved out to the callers.
* mode is specified only once when creating a sysfs_dirent.
* spurious list_del_init(&sd->s_sibling) dropped from create_dir()
This change is to
* prepare for inode allocation fix.
* separate alloc and init code for synchronization update.
* make dentry/inode initialization more flexible for later changes.
This patch doesn't introduce visible behavior change.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch reimplements sysfs_drop_dentry() such that remove_dir() can
use it to drop dentry instead of using a separate mechanism. With
this change, making directories reclaimable is much easier.
This patch used to contain fixes for two race conditions around
sd->s_dentry but that part has been separated out and included into
mainline early as commit 6aa054aadf and
dd14cbc994.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Consolidate sd <-> dentry association into sysfs_attach_dentry() and
call it after dentry and inode are properly set up. This is in
preparation of sysfs_drop_dentry() updates.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that sysfs_dirent can be disconnected from kobject on deletion,
there is no need to orphan each attribute files. All [bin_]attribute
nodes are automatically orphaned when the parent node is deleted.
Kill attribute file orphaning.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: implement sysfs_dirent active reference and immediate disconnect
Opening a sysfs node references its associated kobject, so userland
can arbitrarily prolong lifetime of a kobject which complicates
lifetime rules in drivers. This patch implements active reference and
makes the association between kobject and sysfs immediately breakable.
Now each sysfs_dirent has two reference counts - s_count and s_active.
s_count is a regular reference count which guarantees that the
containing sysfs_dirent is accessible. As long as s_count reference
is held, all sysfs internal fields in sysfs_dirent are accessible
including s_parent and s_name.
The newly added s_active is active reference count. This is acquired
by invoking sysfs_get_active() and it's the caller's responsibility to
ensure sysfs_dirent itself is accessible (should be holding s_count
one way or the other). Dereferencing sysfs_dirent to access objects
out of sysfs proper requires active reference. This includes access
to the associated kobjects, attributes and ops.
The active references can be drained and denied by calling
sysfs_deactivate(). All active sysfs_dirents must be deactivated
after deletion but before the default reference is dropped. This
enables immediate disconnect of sysfs nodes. Once a sysfs_dirent is
deleted, it won't access any entity external to sysfs proper.
Because attr/bin_attr ops access both the node itself and its parent
for kobject, they need to hold active references to both.
sysfs_get/put_active_two() helpers are provided to help grabbing both
references. Parent's is acquired first and released last.
Unlike other operations, mmapped area lingers on after mmap() is
finished and the module implement implementing it and kobj need to
stay referenced till all the mapped pages are gone. This is
accomplished by holding one set of active references to the bin_attr
and its parent if there have been any mmap during lifetime of an
openfile. The references are dropped when the openfile is released.
This change makes sysfs lifetime rules independent from both kobject's
and module's. It not only fixes several race conditions caused by
sysfs not holding onto the proper module when referencing kobject, but
also helps fixing and simplifying lifetime management in driver model
and drivers by taking sysfs out of the equation.
Please read the following message for more info.
http://article.gmane.org/gmane.linux.kernel/510293
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs symlink is implemented by referencing dentry and kobject from
sysfs_dirent - symlink entry references kobject, dentry is used to
walk the tree. This complicates object lifetimes rules and is
dangerous - for example, there is no way to tell to which module the
target of a symlink belongs and referencing that kobject can make it
linger after the module is gone.
This patch reimplements symlink using only sysfs_dirent tree. sd for
a symlink points and holds reference to the target sysfs_dirent and
all walking is done using sysfs_dirent tree. Simpler and safer.
Please read the following message for more info.
http://article.gmane.org/gmane.linux.kernel/510293
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kobj->dentry can go away anytime unless the user controls when the
associated sysfs node is deleted. This patch implements
kobj_sysfs_assoc_lock which protects kobj->dentry. This will be used
to maintain kobj based API when converting sysfs to use sysfs_dirent
tree instead of dentry/kobject.
Note that this lock belongs to kobject/driver-model not sysfs. Once
sysfs is converted to not use kobject in its interface, this can be
removed from sysfs.
This is in preparation of object reference simplification.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sd->s_element a union of sysfs_elem_{dir|symlink|attr|bin_attr}
and rename it to s_elem. This is to achieve...
* some level of type checking : changing symlink to point to
sysfs_dirent instead of kobject is much safer and less painful now.
* easier / standardized dereferencing
* allow sysfs_elem_* to contain more than one entry
Where possible, pointer is obtained by directly deferencing from sd
instead of going through other entities. This reduces dependencies to
dentry, inode and kobject. to_attr() and to_bin_attr() are unused now
and removed.
This is in preparation of object reference simplification.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add s_name to sysfs_dirent. This is to further reduce dependency to
the associated dentry. Name is copied for directories and symlinks
but not for attributes.
Where possible, name dereferences are converted to use sd->s_name.
sysfs_symlink->link_name and sysfs_get_name() are unused now and
removed.
This change allows symlink to be implemented using sysfs_dirent tree
proper, which is the last remaining dentry-dependent sysfs walk.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add sysfs_dirent->s_parent. With this patch, each sd points to and
holds a reference to its parent. This allows walking sysfs tree
without referencing sd->s_dentry which can go away anytime if the user
doesn't control when it's deleted.
sd->s_parent is initialized and parent is referenced in
sysfs_attach_dirent(). Reference to parent is released when the sd is
released, so as long as reference to a sd is held, s_parent can be
followed.
dentry walk in sysfs_readdir() is convereted to s_parent walk.
This will be used to reimplement symlink such that it uses only
sysfs_dirent tree.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently there are four functions to create sysfs_dirent -
__sysfs_new_dirent(), sysfs_new_dirent(), __sysfs_make_dirent() and
sysfs_make_dirent(). Other than sysfs_make_dirent(), no function has
two users if calls to implement other functions are excluded.
This patch consolidates sysfs_dirent creation functions into the
following two.
* sysfs_new_dirent() : allocate and initialize
* sysfs_attach_dirent() : attach to sysfs_dirent hierarchy and/or
associate with dentry
This simplifies interface and gives callers more flexibility. This is
in preparation of object reference simplification.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is no reason this function should be inlined and soon to follow
sysfs object reference simplification will make it heavier. Move it
to dir.c.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allowing attribute and symlink dentries to be reclaimed means
sd->s_dentry can change dynamically. However, updates to the field
are unsynchronized leading to race conditions. This patch adds
sysfs_lock and use it to synchronize updates to sd->s_dentry.
Due to the locking around ->d_iput, the check in sysfs_drop_dentry()
is complex. sysfs_lock only protect sd->s_dentry pointer itself. The
validity of the dentry is protected by dcache_lock, so whether dentry
is alive or not can only be tested while holding both locks.
This is minimal backport of sysfs_drop_dentry() rewrite in devel
branch.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Backport of
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc1/2.6.22-rc1-mm1/broken-out/gregkh-driver-sysfs-allocate-inode-number-using-ida.patch
For regular files in sysfs, sysfs_readdir wants to traverse
sysfs_dirent->s_dentry->d_inode->i_ino to get to the inode number.
But, the dentry can be reclaimed under memory pressure, and there is
no synchronization with readdir. This patch follows Tejun's scheme of
allocating and storing an inode number in the new s_ino member of a
sysfs_dirent, when dirents are created, and retrieving it from there
for readdir, so that the pointer chain doesn't have to be traversed.
Tejun's upstream patch uses a new-ish "ida" allocator which brings
along some extra complexity; this -stable patch has a brain-dead
incrementing counter which does not guarantee uniqueness, but because
sysfs doesn't hash inodes as iunique expects, uniqueness wasn't
guaranteed today anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
struct sysfs_dirent is private to the fs/sysfs/ subtree. It is
not even referenced as an opaque structure outside of that subtree.
The following patch moves the declaration from include/linux/sysfs.h to
fs/sysfs/sysfs.h, making it clearer that nothing else in the kernel
dereferences it.
I have been running this patch for years. Please integrate and forward
upstream if there are no objections.
From: "Adam J. Richter" <adam@yggdrasil.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem. When implementing a network namespace I need to be able
to have multiple network devices with the same name. Currently this
is a problem for /sys/class/net/*.
What I want is a separate /sys/class/net directory in sysfs for each
network namespace, and I want to name each of them /sys/class/net.
I looked and the VFS actually allows that. All that is needed is
for /sys/class/net to implement a follow link method to redirect
lookups to the real directory you want.
Implementing a follow link method that is sensitive to the current
network namespace turns out to be 3 lines of code so it looks like a
clean approach. Modifying sysfs so it doesn't get in my was is a bit
trickier.
I am calling the concept of multiple directories all at the same path
in the filesystem shadow directories. With the directory entry really
at that location the shadow master.
The following patch modifies sysfs so it can handle a directory
structure slightly different from the kobject tree so I can implement
the shadow directories for handling /sys/class/net/.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch prevents a race between IO and removing a file from sysfs.
It introduces a list of sysfs_buffers associated with a file at the inode.
Upon removal of a file the list is walked and the buffers marked orphaned.
IO to orphaned buffers fails with -ENODEV. The driver can safely free
associated data structures or be unloaded.
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Acked-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make sysfs_remove_bin_file() void. If it detects an error,
printk the file name and call dump_stack().
sysfs_hash_and_remove() now returns an error code indicating
its success or failure so that sysfs_remove_bin_file() can
know success/failure.
Convert the only driver that checked the return value of
sysfs_remove_bin_file().
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It works like this:
Open the file
Read all the contents.
Call poll requesting POLLERR or POLLPRI (so select/exceptfds works)
When poll returns,
close the file and go to top of loop.
or lseek to start of file and go back to the 'read'.
Events are signaled by an object manager calling
sysfs_notify(kobj, dir, attr);
If the dir is non-NULL, it is used to find a subdirectory which
contains the attribute (presumably created by sysfs_create_group).
This has a cost of one int per attribute, one wait_queuehead per kobject,
one int per open file.
The name "sysfs_notify" may be confused with the inotify
functionality. Maybe it would be nice to support inotify for sysfs
attributes as well?
This patch also uses sysfs_notify to allow /sys/block/md*/md/sync_action
to be pollable
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch checks for existing sysfs_dirent before
preparing new one while creating sysfs directories and files.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.
Switch all these places to use lookup_one_len.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
o Following patch sets the attributes for newly allocated inodes for sysfs
objects. If the object has non-default attributes, inode attributes are
set as saved in sysfs_dirent->s_iattr, pointer to struct iattr.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
o This adds ->i_op->setattr VFS method for sysfs inodes. The changed
attribues are saved in the persistent sysfs_dirent structure as a pointer
to struct iattr. The struct iattr is allocated only for those sysfs_dirent's
for which default attributes are getting changed. Thanks to Jon Smirl for
this suggestion.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
