Commit Graph

268 Commits

Author SHA1 Message Date
Andy Shevchenko
dfe3da0b28 iio: magnetometer: rm3100: Use get_unaligned_be24()
This makes the driver code slightly easier to read.

Cc: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03 09:47:20 +01:00
Greg Kroah-Hartman
4e1d96306d First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
 cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
 
 New device support
 * ad7476
   - Add ad7091 support (ID only)
 * ad9467
   - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
 * adi-axi-adc
   - New driver to support ADIs generic AXI ADC IP core, used to provide
     high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
     paired with a device using a slow configuration interface (spi etc)
     Includes DT bindings and some fixes for fpga headers.
 * bmg160
   - Add support for BMI088 (ID only)
 * max1241
   - New driver for this ADC.
 * st_sensors
   - Add support for LIS2HH12 accelerometer
 * sx9310
   - New driver supporting sx9310 and sx9311 proximity sensors.
 
 Yaml DT binding conversions
 * rockchip-saradc (including adding some missing parts)
 * stm32-dac
 * tsl2563
 * vcnl4000
 
 Features
 * st_lsm6dsx
   - Add LIS3MDL as a possible sensor hub device.
 * vcnl4000
   - Add new concept of near level (from DT) to provide to userspace which
     often needs to have some calibrated concept of 'near'.
 
 Cleanups, minor fixes etc.
 * core
   - Use snprintf for functions where strings are built and there is
     potential for overflow.
   - Correct docs to indicate mlock should not be used directly by drivers.
   - Fix up accidental dropping of a patch to use bitmap_zalloc.
   - Stop allowing enabling of buffers with no channels enabled.
   - Drop unused 'stufftoread' from iio_buffer.
   - Drop scan_el_attrs form iio_buffer as unused.
   - Reorder sanity checks in __iio_device_register to fail earlier.
   - Drop all the devm_ runregister / free functions from IIO as they
     were never used and encourage poor design.
 * dma-buffer
   - Tidy up includes.
 * dma-engine-buffer
   - Provide dev-managed allocator.
   - Fix an issue with printing a size_t
 * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
   - Replace some unnecessary casts of error ptrs and whilst there.
     use the %pe printf parameter to print them in a more useful fashion.
 * cross subsystem
   - Drop casts in calls to regmap_bulk_read as they make no sense.
   - Use devm_platform_ioremap_resource to reduce boilerplate.
   - Fix typos in Analog Devices.
 * counters/104-quad
   - Add Syed Nayyar Waris as an additional maintainer.
 * ad7476
   - Generate CONVST signal internally rather than requiring external
     trigger.  Add sysfs read back as can now do so.
   - use devm_add_action_or_reset to tidy up error and remove handling.
 * ad7793
   - Switch to read_avail from explicit attribute. Mostly done to avoid
     confusing people with a - sign (without surounding spaces) that
     was correct but checkpatch didn't like.
 * adis library
   - Add missing newlines at end of error messages.
 * adis16400
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * adis16460
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * ad_sigma_delta
   - Move some channel definitions into individual drivers to avoid
     having to deal with complex options.
 * ak8974
   - Silence an error on deffered probe.
 * bmp280
   - Harden against IRQ before registration.
   - Convert to read_avail instead of opencoding the equivalent.
   - Explicitly mark GPIO as optional.
   - Cleanup casts.
   - Remove line breaks from strings.
 * htts221
   - Replace direct access to platform_data with dev_get_platdata().
   - Use device properties rather than device tree ones to allow ACPI
     probing.
   - Casting cleanups.
 * intel_mrfld_adc
   - Don't use unaligned accessor for aligned data.
 * isl29125
   - Reorder buer pre and post hooks to allow for coming core rework.
 * ltc2983
   - Remove comp to bool.
 * max1363
   - Stop using mlock from the iio_dev directly in favour of a local lock
     with clearly defined scope.
 * max30100
   - Use generic device properties to allow ACPI probe.
 * mpu6050
   - Convert to i2c_new_client_device.
   - Add debugfs register access.
 * st_lsm6dsx
   - Provide means of configuring full scale on slave device if supported.
   - Drop include of st_sensors header to get one value. Its not otherwise
     used by this driver.
 * st-sensors
   - Replace direct access to platform_data with dev_get_platdata().
   - Casting cleanups.
   - Avoid splitting strings.
 * st_uvis25
   - Casting cleanups.
 * tsl2563
   - Typo fix.
 * tsl2772
   - scnprintf in a non obvious string building usecase. Note also 'fixes'
     a wrong calculation of remaining space that couldn't actually cause
     any trouble as there was lots of room.
 * xilinx-xadc
   - Fix Lars-Peter spelling his own name wrong :) + additional typos.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6gicARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj3ig//XRAAHRSfzXFpvYxITVKDIGwP/giYdp91
 OflGw/0aOZFExr72ENLmCArXZPOT2qAZyNNoDNvuJ9SkcVDf4bT3w9gYwWtJ1sd7
 Hhh+1JpPspSo6vS85FMjm37UDfSbmYqB6wC57cZ5pKQIiJwi6W2hGsyOoOXmfLLc
 57d3mlg4g3KLl9Hl4UTU84gE1ushKQgNxVH21Y71pOTa8p+xbWWcspWjR2Jf+kVZ
 qPr2+2rP/AjeAVLu9SKfdBiczYQCNR3uFWKkOKsBE9fq3sbcN6NT5DktrSJUH+qU
 zfUGmShCEP908/9fARazXQZcTOX1tIUOnrpHG9l54GNPh3S2Qk9xGaZxvQy5sguC
 AmC4p+MaIMrMcgWMk9po+nE5INJq7HBV/0jnADG307wEhFrKrjh/2PtP4f9k/Mcv
 sHB7K1+dcJAUwFb5gccdDBfmKMnwfnGS8OFGLXZZKBIDqSvptmIs/pmavjEPgqhV
 GwGTDPyZKeyDnyhTXGafxii03Q2I62Zte5l4jcZ+q8Q4UMxQovEkX6IvUpXwA0Kk
 eoxedbgdvzxrDNiNrXa0k6CLzqSQW+aVHgJG+HEig4IXQse8zXb11HCs35zq5r4j
 JI2UjLk3zUHLiNR/Ir9fKAbPwWSWv3IWkfmFEEUWvUFjM+Xot1Hg+61vBTFKo4iK
 EIqqPZmd5Mk=
 =DyTF
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...
2020-04-23 11:06:48 +02:00
Dmitry Osipenko
2de8c02349 iio: magnetometer: ak8974: Silence deferred-probe error
It's not uncommon that voltage regulator becomes available later during
kernel's boot process. This patch adds info message about unavailable
regulators in a case of the deferred-probe error and also amends the
error message with a error code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 16:56:43 +01:00
Jonathan Cameron
06c482605b iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
Given the parameter is void *, casting to u8 * is unnecessary.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2020-04-19 16:56:40 +01:00
Nishant Malpani
9623473cbb iio: magn: bmc150: Use vsprintf extension %pe for symbolic error name
Utilize %pe format specifier from vsprintf while printing error logs
with dev_err(). Discards the use of unnecessary explicit casting and
prints symbolic error name which might prove to be convenient during
debugging.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 16:56:18 +01:00
Andy Shevchenko
1f38527d58 iio: st_sensors: Drop unneeded explicit castings
In few places the unnecessary explicit castings are being used.
Drop them for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-21 10:26:21 +00:00
Stephan Gerhold
b500c086e4 iio: magnetometer: ak8974: Fix negative raw values in sysfs
At the moment, reading from in_magn_*_raw in sysfs tends to return
large values around 65000, even though the output of ak8974 is actually
limited to ±32768. This happens because the value is never converted
to the signed 16-bit integer variant.

Add an explicit cast to s16 to fix this.

Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21 11:59:46 +00:00
Andy Shevchenko
71f221f8a0 iio: magnetometer: ak8975: Convert to use device_get_match_data()
Convert to use device_get_match_data() instead of open coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18 11:43:17 +00:00
Andy Shevchenko
6081847885 iio: magnetometer: ak8975: Get rid of platform data
Since IIO framework supports device property API and driver has been moved
already to the use of GPIO descriptors the logical continuation is to
get rid of platform data completely. We are on the safe side here since
there are no users of it in the kernel.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18 11:43:17 +00:00
Andy Shevchenko
ecb27c5e43 iio: st_sensors: Make use of device properties
Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-13 21:53:39 +00:00
Andy Shevchenko
efc78983d2 iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
Since we have access to the struct device_driver and thus to the ID table,
there is no need to supply special parameters to st_sensors_of_name_probe().

Besides that we have a common API to get driver match data, there is
no need to do matching separately for OF and ACPI.

Taking into consideration above, simplify the ST sensors code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-13 21:51:52 +00:00
Linus Walleij
2c289e6394 iio: ak8975: Convert to use GPIO descriptor
The end-of-conversion (EOC) GPIO line is better to grab using
a GPIO descriptor. We drop the pdata for this: clients using board
files can use machine descriptor tables to pass this GPIO from
static data.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-15 11:42:14 +00:00
Linus Walleij
12737476e0 iio: st: Drop GPIO include
None of the ST sensor drivers use any symbols from
<linux/gpio.h>, just drop the include from all of them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-27 15:55:45 +00:00
Denis Ciocca
e031d5f558 iio:st_sensors: remove buffer allocation at each buffer enable
This patch is removing the buffer allocation at each buffer enable.
We just allocate enough memory in the main structure during probe
to cover maximum size needed (that anyway is pretty small) [16bytes].

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-11 09:26:04 +01:00
Denis Ciocca
9cd15d521a iio: remove get_irq_data_ready() function pointer and use IRQ number directly
Not even sure why it was there since the beginning. Just use IRQ
number in the sensor_data struct.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05 16:50:08 +01:00
Denis Ciocca
6ee19af415 iio:magn: preenable/postenable/predisable fixup for ST magn buffer
This patch is trying to cleanup for good the buffers operation functions.
Let's rename the goto label using operation to perform and not
where it fails.

Not stable material as not fixing a 'bug' but rather bringing the
driver in line with general 'patterns' to allow a subsystem wide
cleanup.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05 15:49:18 +01:00
Christophe JAILLET
3f2cde7426 iio: magnetometer: mmc35240: Fix a typo in the name of a constant
Everything is about mmc35240_ except MMC53240_WAIT_SET_RESET (3 and 5
switched).

This is likely a typo. Define and use MMC35240_WAIT_SET_RESET instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:07 +01:00
Denis Ciocca
062809ef77 iio: make st_sensors drivers use regmap
This patch is meant to replace the i2c/spi transfer functions with
regmap. SPI framework requires DMA safe buffers so let's add GFP_DMA
flag for memory allocation used by bulk_read functions.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:06 +01:00
Denis Ciocca
1ecd245e0e iio: move 3-wire spi initialization to st_sensors_spi
Some devices need to be configured with special bit in order to
use spi 3-wire. This was done during device identification phase.
Instead, let's move this part as spi specific.
Doing this the check_device_support function becomes a simple
device id check, so let's rename it.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:06 +01:00
Denis Ciocca
291d83f2f4 iio:magn: device settings are set immediately during probe
This patch set magn settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:05 +01:00
Denis Ciocca
aa4e75c850 iio:magn: introduce st_magn_get_settings() function
The function is introduced to retrieve magn device settings. It will be
used by probe in order to configure regmap.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27 22:52:05 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner
a61127c213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin st fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 111 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00
Thomas Gleixner
36edc93958 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330
Based on 1 normalized pattern(s):

  this file is subject to the terms and conditions of version 2 of the
  gnu general public license see the file copying in the main
  directory of this archive for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 55 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:06 +02:00
Thomas Gleixner
2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner
fda8d26e61 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177
Based on 1 normalized pattern(s):

  licensed under the gpl 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 135 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:19 -07:00
Thomas Gleixner
c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Thomas Gleixner
1621633323 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin street fifth floor boston ma 02110 1301 usa

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option [no]_[pad]_[ctrl] any later version this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin street fifth floor boston ma
  02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:39 +02:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner
09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Kangjie Lu
536cc27dea iio: hmc5843: fix potential NULL pointer dereferences
devm_regmap_init_i2c may fail and return NULL. The fix returns
the error when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:20:14 +01:00
H. Nikolaus Schaller
67b9d4d098 iio: ak8975: improve code readability
- use temporary variable in get_mount_matrix()
- remove , after { }

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:48 +01:00
H. Nikolaus Schaller
8d7ea73814 iio: magnetometer: hmc5843: add mount matrix support
This patch allows to read a mount-matrix device tree
property and report to user-space or in-kernel iio
clients.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:48 +01:00
H. Nikolaus Schaller
d9842c770a iio: magnetometer: bmc150: add mount matrix support
This patch allows to read a mount-matrix device tree
property and report to user-space or in-kernel iio
clients.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:48 +01:00
Andy Shevchenko
fb1589710e iio: Allow to read mount matrix from ACPI
Currently mount matrix is allowed in Device Tree, though there is
no technical issue to extend it to support ACPI.

Convert the function to use device_property_read_string_array() and
thus allow to read mount matrix from ACPI if available.

Example of use in _DSD method:

  Name (_DSD, Package ()
  {
     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
     Package ()
     {
        Package () { "mount-matrix", Package() {
                "1", "0",     "0",
                "0", "0.866", "0.5",
                "0", "-0.5",  "0.866",
        } },
     }
  })

At the same time drop the "of" prefix from its name and
convert current users.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:46 +01:00
Anson Huang
1dca9bdec6 iio: magnetometer: mag3110: add vdd/vddio regulator operation support
The magnetometer's power supplies could be controllable on some platforms,
such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled
by a GPIO fixed regulator, need to make sure the regulators are enabled
before any communication with mag3110, this patch adds vdd/vddio regulator
operation support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-12 19:00:23 +00:00
Greg Kroah-Hartman
c6cbcdea7a Second set of IIO new device support, features and cleanups for the 4.21 cycle.
Staging graduation
 * ad2s90
   - Driver for this resolver to digital chip.
 
 New drivers and device support.
 * ad5686
   - Add support for ad5310r DAC and associated fix in value read back.
 * exynos-adc
   - Support for S5PV210 which is slightly different from other parts.
 * mcp41010
   - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
   MCP42100 microchip potentiometers.
 
 New ACPI ids.
 * ak8975
   - AKM9911 ACPI HID.
 * kxcjk-1013
   - KXJ2109 ACPI HID.
   - KIOX010A ACPI HID.
 
 New features
 * ad5933
   - Explicit DT binding.
 * ad2s90
   - Explicit DT binding including dropping spi setup that is done via dt
     in favour of verifying the settings form DT.
 * adt7316
   - Explicit DT binding and support for gpio, irq_flags etc.
 * stm32-adc
   - Runtime power management.
 
 Minor fixes and cleanups
 * core
   - Protect against missing info structure.
 * ad2s90
   - SPDX
   - Add documentation fo the mutex.
 * ad7280a
   - Check allocation failure.
   - Fix an accidental replacement of an error return.
 * adt7316
   - Switch some variables to be local and rename for consistency with other
     drivers.
   - Revert a false handling of 0 as an error introduced earlier this cycle.
 * bmi160
   - Use devm functions throughout probe() to avoid need for remove().
 * hid-sensor-hub
   - White space cleanup.
 * hts221
   - MAINTAINERS entry.
 * lis302
   - Use generic name in the DT binding doc.
 * Messon-saradc
   - Check for allocation error.
   - Fix some presented clock names that break clk debugfs.
 * qcom-spmi-adc
   - A fix for initialization of the prescale property. Came late in the
     cycle, so merge window is probably the best route for this.
 * st_lsm6dsx
   - Allow for variable read length to support wider range of slave devices.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlwRULkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojIIQ/+PSR0V3gW/eXZIoVFcqbjqAYvYQQkK5rH
 zOstRvKkgs+gTTB1S+dhTQL80PJBrrfSDRB1E85fJ2hx2kh80k0/zukAG73PsIF0
 uqJazrHx5W6WeTj4xmN4rpLRG25DwkCHRMmDdfM6atCVhdz1bYSM56vEGAnXfVMf
 fPMbZ7EviN6EnKTtFSPI4F8BhVzesHAzIYGp+DYpMZdqa4nhr2dZyxVuRz3jpPEI
 xutODWVKP/0O7vQGBjSlCjx/BMSWGQM5+B0gandKzQULuMwHqi2QMXeD13pxaKQm
 Vy2cAEd6YLTGxIHKcw93qCWJjDZz06owvwMHvkoUmPTZXvPavLo+TyYia7rOTzPu
 IimDIPf0ci5qIDksxqtSiEzkFDF5YMyfnDJnAC8Ogm98NRC7FNnD5edXsc9sfI23
 CBOH5fdGoIV4lNxvuEarnFJ0VdV8ifY8tubrI2l0kf/v0D5tGbcddClFpennkfjf
 vjqmkBc2KgD+83SSNgSAcqUKbqxfh4JsXVPpHx8WMLDUA/4S3GcBwVF7fkLqwmCQ
 jEuF/zYOoGwvmzDNY1LSkhlWCE16MmXhu0yDQgekA0XLQ2ODynbkV3LQCwdq4dNR
 /ZMoBRJ9PSZC35sGkNcFIKm5Nw6Ibl8R1c7WEqxA8vkLhBjJ99CwIsK0M5YcHaak
 fCWXUnJzpF4=
 =+vyl
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups for the 4.21 cycle.

Staging graduation
* ad2s90
  - Driver for this resolver to digital chip.

New drivers and device support.
* ad5686
  - Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
  - Support for S5PV210 which is slightly different from other parts.
* mcp41010
  - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
  MCP42100 microchip potentiometers.

New ACPI ids.
* ak8975
  - AKM9911 ACPI HID.
* kxcjk-1013
  - KXJ2109 ACPI HID.
  - KIOX010A ACPI HID.

New features
* ad5933
  - Explicit DT binding.
* ad2s90
  - Explicit DT binding including dropping spi setup that is done via dt
    in favour of verifying the settings form DT.
* adt7316
  - Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
  - Runtime power management.

Minor fixes and cleanups
* core
  - Protect against missing info structure.
* ad2s90
  - SPDX
  - Add documentation fo the mutex.
* ad7280a
  - Check allocation failure.
  - Fix an accidental replacement of an error return.
* adt7316
  - Switch some variables to be local and rename for consistency with other
    drivers.
  - Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
  - Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
  - White space cleanup.
* hts221
  - MAINTAINERS entry.
* lis302
  - Use generic name in the DT binding doc.
* Messon-saradc
  - Check for allocation error.
  - Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
  - A fix for initialization of the prescale property. Came late in the
    cycle, so merge window is probably the best route for this.
* st_lsm6dsx
  - Allow for variable read length to support wider range of slave devices.

* tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits)
  iio: adc: qcom-spmi-adc5: Initialize prescale properly
  dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
  iio: adc: Allow selection of Exynos ADC on S5PV210
  iio: adc: exynos-adc: Add S5PV210 variant
  iio: bmi160: use all devm functions in probe
  iio: dac: ad5686: fix bit shift read register
  iio:dac:ad5686: Add AD5310R support
  Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
  dt-bindings: iio: accel: use a generic node name for lis302
  iio: core: check 'info' value before registering the device
  staging: iio: adc: ad7280a: fix overwrite of the returned value
  staging: iio: adc: ad7280a: check for devm_kasprint() failure
  iio: humidity: hts221: add entry in MAINTAINERS file
  iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
  staging:iio:ad2s90: Move out of staging
  staging:iio:ad2s90: Add comment to device state mutex
  staging:iio:ad2s90: Replace license text w/ SPDX identifier
  dt-bindings:iio:resolver: Add docs for ad2s90
  staging:iio:ad2s90: Add max frequency check at probe
  staging:iio:ad2s90: Remove spi setup that should be done via dt
  ...
2018-12-13 13:37:24 +01:00
Greg Kroah-Hartman
d5d12ce229 Merge 4.20-rc5 into staging-next
We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 07:55:28 +01:00
Stephan Gerhold
0a9ff2a13b iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-01 16:05:56 +00:00
Song Qiang
121354b2ec iio: magnetometer: Add driver support for PNI RM3100
PNI RM3100 is a high resolution, large signal immunity magnetometer,
composed of 3 single sensors and a processing chip with a MagI2C
interface.

Following functions are available:
 - Single-shot measurement from
   /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw
 - Triggerd buffer measurement.
 - DRDY pin for data ready trigger.
 - Both i2c and spi interface are supported.
 - Both interrupt and polling measurement is supported, depends on if
   the 'interrupts' in DT is declared.

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16 18:32:31 +00:00
Hans de Goede
0145b50566 iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16 11:42:12 +00:00
Martin Kelly
2eb4c9f2a5 iio:magnetometer: st_magn: add BDU settings
LIS3MDL and LSM9DS1 are missing BDU settings in their register maps, so add
them. I don't have a LIS3MDL sensor to test, but this works correctly on
the LSM9DS1, which has the same register map.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11 15:29:43 +00:00
Martin Kelly
0d92aa2c27 iio:magnetometer: st_magn: add LSM9DS1 support
Update the sensor settings to support the LSM9DS1 sensor. Although the
LSM9DS1 accelerometer and gyroscope are coupled together to use the same
FIFO, the magnetometer is separate and can be cleanly supported without
refactoring the existing driver.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11 15:29:43 +00:00
Martin Kelly
53759e259d iio: magnetometer: add clarifying comment
Add a comment clarifying better when to use <device_name> vs
<device_name>-magn in compatibility strings.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11 15:29:42 +00:00
Martin Kelly
fe5192ac81 iio:st_magn: Fix enable device after trigger
Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.

To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.

Fixes: 90efe05562 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-03 11:24:07 +00:00
Martin Kelly
2019738cc8 iio: st_sensors: miscellaneous cleanup
Miscellaneous cleanup to fix minor consistency, grammar, and spelling
issues.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-10-21 15:33:36 +01:00
Song Qiang
f9c4c27f1b iio: magnetometer: hmc5843: Fixed a comment error.
Replace 'hcm5843' with 'hmc5843'.

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-22 10:23:51 +01:00
Richard Tresidder
3345d47023 iio: magnetometer: mag3110: Add ability to run in continuous mode
Adds the ability to run the Mag3110 in continuous mode to speed up the
sampling rate.
Depending on the sampling rate requested the device can be put in or out
of continuous mode automatically.
Shifting out of continuous mode requires a potential 1 / ODR wait which
is also implemented.
Modified the sleep method when data is not ready to allow for
sampling > 50sps to work.

Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-12 11:01:59 +01:00
Rodrigo Siqueira
5def839c48 iio:magnetometer: Replace magic number 0 by IIO_CHAN_INFO_RAW
The function magn_3d_read_raw has a switch statement handling multiple
cases per channel. The first case statement uses the magic number 0,
which means IIO_CHAN_INFO_RAW. Additionally, the iio_chan_spec for
magn_3d_channels is configured to be IIO_CHAN_INFO_RAW. Therefore, this
patch replaces the magic number 0 for the appropriate IIO_CHAN_INFO_RAW.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-03 15:23:13 +00:00
Andy Shevchenko
9ed2484598 iio: magnetometer: ak8975: Add another ACPI ID
Add new ACPI ID for ak9911 as had been found on prototype board.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:40:02 +00:00