Systems may be constructed with various specialized nodes. Some nodes
may provide memory, some provide compute devices that access and use
that memory, and others may provide both. Nodes that provide memory are
referred to as memory targets, and nodes that can initiate memory access
are referred to as memory initiators.
Memory targets will often have varying access characteristics from
different initiators, and platforms may have ways to express those
relationships. In preparation for these systems, provide interfaces for
the kernel to export the memory relationship among different nodes memory
targets and their initiators with symlinks to each other.
If a system provides access locality for each initiator-target pair, nodes
may be grouped into ranked access classes relative to other nodes. The
new interface allows a subsystem to register relationships of varying
classes if available and desired to be exported.
A memory initiator may have multiple memory targets in the same access
class. The target memory's initiators in a given class indicate the
nodes access characteristics share the same performance relative to other
linked initiator nodes. Each target within an initiator's access class,
though, do not necessarily perform the same as each other.
A memory target node may have multiple memory initiators. All linked
initiators in a target's class have the same access characteristics to
that target.
The following example show the nodes' new sysfs hierarchy for a memory
target node 'Y' with access class 0 from initiator node 'X':
# symlinks -v /sys/devices/system/node/nodeX/access0/
relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY
# symlinks -v /sys/devices/system/node/nodeY/access0/
relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX
The new attributes are added to the sysfs stable documentation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regmap provides a couple of ways to validate the register range used.
a) maxim allowed register, b) writable/readable register tables,
c) callback function that can be provided by the driver to validate
a register. regmap framework should verify if registers
are writeable before every write operation. However this doesn't
seems to happen in every situation.
The method `_regmap_raw_write_impl` is only using the `writeable_reg`
callback to verify if register is writeable, ignoring the other two.
This can lead to undefined behaviour since this allows to write to
registers that could be declared un-writeable by using any other
option.
Change `_regmap_raw_write_impl` to use the `regmap_writeable` method
to verify if registers are writable before the write operation.
Signed-off-by: Nandor Han <nandor.han@vaisala.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These prints are useful if we're doing PM suspend debugging. Having them
at pr_debug() level means that we need to either enable DEBUG in this
file, or compile the kernel with dynamic debug capabilities. Both of
these options have drawbacks like custom compilation or opting into all
debug statements being included into the kernel image. Given that we
already have infrastructure to collect PM debugging information with
CONFIG_PM_DEBUG and friends, let's change the pr_debug usage here to be
pm_pr_dbg() instead so we can collect the wakeup information in the
kernel logs.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Checking for value of type default value just after allocating will
always be zero and the type register default values will never be read,
so fix this!
Without this patch setting irq type will be silently ignored.
Patch "regmap: regmap-irq: Remove default irq type setting from core"
did remove the default mask but it forgot to remove the check before
reading the default type register.
Fixes: 84267d1b18 ("regmap: regmap-irq: Remove default irq type setting from core")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 7934779a69 ("Driver-Core: disable /sbin/hotplug by
default"), the help text for the /sbin/hotplug fork-bomb says
"This should not be used today [...] creates a high system load, or
[...] out-of-memory situations during bootup". The rationale for this
was that no recent mainstream system used this anymore (in 2010!).
A few years later, the complete uevent helper support was made optional
in commit 86d56134f1 ("kobject: Make support for uevent_helper
optional."). However, if was still left enabled by default, to support
ancient userland.
Time passed by, and nothing should use this anymore, so it can be
disabled by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the speed of the loop jumping to the next
available register
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock
the deadlock scenario is like following:
First thread is probing cs2000
cs2000_probe()
clk_register()
__clk_core_init()
clk_prepare_lock() ----> acquires prepare_lock
cs2000_recalc_rate()
i2c_smbus_read_byte_data()
rcar_i2c_master_xfer()
dma_request_chan()
rcar_dmac_of_xlate()
rcar_dmac_alloc_chan_resources()
pm_runtime_get_sync()
__pm_runtime_resume()
rpm_resume()
rpm_callback()
genpd_runtime_resume() ----> acquires genpd->mlock
Second thread is attaching any device to the same PM domain
genpd_add_device()
genpd_lock() ----> acquires genpd->mlock
cpg_mssr_attach_dev()
of_clk_get_from_provider()
__of_clk_get_from_provider()
__clk_create_clk()
clk_prepare_lock() ----> acquires prepare_lock
Since currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect
these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev
from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired
in .attach_dev and .detach_dev
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix sparse warning:
drivers/base/swnode.c:475:22: warning: symbol 'software_node_get_parent' was not declared. Should it be static?
drivers/base/swnode.c:484:22: warning: symbol 'software_node_get_next_child' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
a compat driver so distributions can opt-in to the new ABI.
* Allow for an alternative driver for the device-dax address-range
* Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
* Arrange for the device-dax target-node to be onlined so that the newly
added memory range can be uniquely referenced by numa apis.
-----BEGIN PGP SIGNATURE-----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=hfa3
-----END PGP SIGNATURE-----
Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax updates from Dan Williams:
"New device-dax infrastructure to allow persistent memory and other
"reserved" / performance differentiated memories, to be assigned to
the core-mm as "System RAM".
Some users want to use persistent memory as additional volatile
memory. They are willing to cope with potential performance
differences, for example between DRAM and 3D Xpoint, and want to use
typical Linux memory management apis rather than a userspace memory
allocator layered over an mmap() of a dax file. The administration
model is to decide how much Persistent Memory (pmem) to use as System
RAM, create a device-dax-mode namespace of that size, and then assign
it to the core-mm. The rationale for device-dax is that it is a
generic memory-mapping driver that can be layered over any "special
purpose" memory, not just pmem. On subsequent boots udev rules can be
used to restore the memory assignment.
One implication of using pmem as RAM is that mlock() no longer keeps
data off persistent media. For this reason it is recommended to enable
NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
at rest. We considered making this recommendation an actively enforced
requirement, but in the end decided to leave it as a distribution /
administrator policy to allow for emulation and test environments that
lack security capable NVDIMMs.
Summary:
- Replace the /sys/class/dax device model with /sys/bus/dax, and
include a compat driver so distributions can opt-in to the new ABI.
- Allow for an alternative driver for the device-dax address-range
- Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
- Arrange for the device-dax target-node to be onlined so that the
newly added memory range can be uniquely referenced by numa apis"
NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.
And apparently the PMEM modules can cause that a lot more than regular
RAM. The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.
Quoting Dan from another email:
"The exposure can be reduced in the volatile-RAM case by scanning for
and clearing errors before it is onlined as RAM. The userspace tooling
for that can be in place before v5.1-final. There's also runtime
notifications of errors via acpi_nfit_uc_error_notify() from
background scrubbers on the DIMM devices. With that mechanism the
kernel could proactively clear newly discovered poison in the volatile
case, but that would be additional development more suitable for v5.2.
I understand the concern, and the need to highlight this issue by
tapping the brakes on feature development, but I don't see PMEM as RAM
making the situation worse when the exposure is also there via DAX in
the PMEM case. Volatile-RAM is arguably a safer use case since it's
possible to repair pages where the persistent case needs active
application coordination"
* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: "Hotplug" persistent memory for use like normal RAM
mm/resource: Let walk_system_ram_range() search child resources
mm/memory-hotplug: Allow memory resources to be children
mm/resource: Move HMM pr_debug() deeper into resource code
mm/resource: Return real error codes from walk failures
device-dax: Add a 'modalias' attribute to DAX 'bus' devices
device-dax: Add a 'target_node' attribute
device-dax: Auto-bind device after successful new_id
acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
device-dax: Add /sys/class/dax backwards compatibility
device-dax: Add support for a dax override driver
device-dax: Move resource pinning+mapping into the common driver
device-dax: Introduce bus + driver model
device-dax: Start defining a dax bus model
device-dax: Remove multi-resource infrastructure
device-dax: Kill dax_region base
device-dax: Kill dax_region ida
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making
it discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework
initialization for devices in multiple power domains if
only one of them is scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same
as the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid
potential issues with it and do some cleanups unlocked by
that change (Viresh Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices
in the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=fHRq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previously merged
power management material for 5.1-rc1 with one cpupower utility update
that wasn't pushed earlier due to unfortunate timing.
Specifics:
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making it
discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework initialization
for devices in multiple power domains if only one of them is
scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same as
the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid potential
issues with it and do some cleanups unlocked by that change (Viresh
Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices in
the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel)"
* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governor: Add new governors to cpuidle_governors again
cpufreq: intel_pstate: Fix up iowait_boost computation
PM / OPP: Update performance state when freq == old_freq
PM / wakeup: Drop wakeup_source_drop()
PM / wakeup: Rework wakeup source timer cancellation
PM / domains: Remove one unnecessary blank line
PM / Domains: Return early for all errors in _genpd_power_off()
PM / Domains: Improve warn for multiple states but no governor
OPP: Fix handling of multiple power domains
PM / QoS: Fix typo in file description
cpufreq: pxa2xx: remove incorrect __init annotation
PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
PM-runtime: Consolidate code to get active/suspended time
PM: Add and use pr_fmt()
cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
cpuidle: menu: Avoid overflows when computing variance
tools/power/cpupower: Display boost frequency separately
* pm-domains:
PM / domains: Remove one unnecessary blank line
PM / Domains: Return early for all errors in _genpd_power_off()
PM / Domains: Improve warn for multiple states but no governor
After commit d856f39ac1cc ("PM / wakeup: Rework wakeup source timer
cancellation") wakeup_source_drop() is a trivial wrapper around
__pm_relax() and it has no users except for wakeup_source_destroy()
and wakeup_source_trash() which also has no users, so drop it along
with the latter and make wakeup_source_destroy() call __pm_relax()
directly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is strange to only return early for -EBUSY state and left other
errors to be still measured execution time.
As for error cases, the elapsed_ns computed actually is not quite
accurate and meaningful for governor to use. So let's simply return
for all error cases.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's possible a PM domain defines only one state and it does not need
a governor to work. For such case, a warning actually is not necessary.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a typo in the file description comment.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- add debugfs support for dumping dma-debug information (Corentin Labbe)
- Kconfig cleanups (Andy Shevchenko and me)
- debugfs cleanups (Greg Kroah-Hartman)
- improve dma_map_resource and use it in the media code
- arch_setup_dma_ops / arch_teardown_dma_ops cleanups
- various small cleanups and improvements for the per-device coherent
allocator
- make the DMA mask an upper bound and don't fail "too large" dma mask
in the remaning two architectures - this will allow big driver
cleanups in the following merge windows
-----BEGIN PGP SIGNATURE-----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=nAMI
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
- add debugfs support for dumping dma-debug information (Corentin
Labbe)
- Kconfig cleanups (Andy Shevchenko and me)
- debugfs cleanups (Greg Kroah-Hartman)
- improve dma_map_resource and use it in the media code
- arch_setup_dma_ops / arch_teardown_dma_ops cleanups
- various small cleanups and improvements for the per-device coherent
allocator
- make the DMA mask an upper bound and don't fail "too large" dma mask
in the remaning two architectures - this will allow big driver
cleanups in the following merge windows
* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
Documentation/DMA-API-HOWTO: update dma_mask sections
sparc64/pci_sun4v: allow large DMA masks
sparc64/iommu: allow large DMA masks
sparc64: refactor the ali DMA quirk
ccio: allow large DMA masks
dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
dma-mapping: remove dma_mark_declared_memory_occupied
dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
dma-mapping: improve selection of dma_declare_coherent availability
dma-mapping: remove an incorrect __iommem annotation
of: select OF_RESERVED_MEM automatically
device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
mfd/sm501: depend on HAS_DMA
dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
dma-mapping: move debug configuration options to kernel/dma
dma-debug: add dumping facility via debugfs
dma: debug: no need to check return value of debugfs_create functions
videobuf2: replace a layering violation with dma_map_resource
dma-mapping: don't BUG when calling dma_map_resource on RAM
...
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
Avoid the open-coding of the accounted time acquisition in
runtime_active|suspend_time_show() and make them call
pm_runtime_active|suspended_time() instead.
Note that this change also indirectly avoids holding dev->power.lock
around the do_div() computation and the sprintf() call which is an
additional improvement.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In a step to consolidate the code for fetching the PM-runtime
active/suspended time for a device, add a common function for that
and make the existing pm_runtime_suspended_time() call it.
Also add a corresponding pm_runtime_active_time() calling the new
common function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Changelog, function rename ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Prefix all printk/pr_<level> messages with "PM: " to make the
logging a bit more consistent.
Miscellanea:
o Convert a few printks to pr_<level>
o Whitespace to align to open parentheses
o Remove embedded "PM: " from pr_debugs as pr_fmt adds it
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates (you will
have a merge issue with Kconfig and Makefile), xhci updates, and typec
additions. Also included in here are a lot of small cleanups and fixes
and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
8FTdneQfN2J8Hhc6KGXE
=Kx9I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates, xhci
updates, and typec additions. Also included in here are a lot of small
cleanups and fixes and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
wusb: Remove unnecessary static function ckhdid_printf
usb: core: make default autosuspend delay configurable
usb: core: Fix typo in description of "authorized_default"
usb: chipidea: Refactor USB PHY selection and keep a single PHY
usb: chipidea: Grab the (legacy) USB PHY by phandle first
usb: chipidea: imx: set power polarity
dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
usb: chipidea: imx: remove unused header files
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
usb: core: add option of only authorizing internal devices
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
usb: xhci: fix build warning - missing prototype
usb: xhci: dbc: Fixing typo error.
usb: xhci: remove unused member 'parent' in xhci_regset struct
xhci: tegra: Prevent error pointer dereference
USB: serial: option: add Telit ME910 ECM composition
usb: core: Replace hardcoded check with inline function from usb.h
usb: core: skip interfaces disabled in devicetree
usb: typec: mux: remove redundant check on variable match
...
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they asked
me to do as the MEI driver is starting to interact with the i915 driver,
and it needed some coordination. All of those patches have been
properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
9e3l7H76oe33o96Qjhor
=8A2k
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they
asked me to do as the MEI driver is starting to interact with the i915
driver, and it needed some coordination. All of those patches have
been properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time"
* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
habanalabs: adjust Kconfig to fix build errors
habanalabs: use %px instead of %p in error print
habanalabs: use do_div for 64-bit divisions
intel_th: gth: Fix an off-by-one in output unassigning
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: use NULL to initialize array of pointers
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: soft-reset device if context-switch fails
habanalabs: print pointer using %p
habanalabs: fix memory leak with CBs with unaligned size
habanalabs: return correct error code on MMU mapping failure
habanalabs: add comments in uapi/misc/habanalabs.h
habanalabs: extend QMAN0 job timeout
habanalabs: set DMA0 completion to SOB 1007
habanalabs: fix validation of WREG32 to DMA completion
habanalabs: fix mmu cache registers init
habanalabs: disable CPU access on timeouts
habanalabs: add MMU DRAM default page mapping
habanalabs: Dissociate RAZWI info from event types
misc/habanalabs: adjust Kconfig to fix build errors
...
Fix the length value used in the PROPERTY_ENTRY_STRING() macro and
make software nodes use the get_named_child_node() fwnode callback
(Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JlFr
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Fix the length value used in the PROPERTY_ENTRY_STRING() macro and
make software nodes use the get_named_child_node() fwnode callback
(Heikki Krogerus)"
* tag 'devprop-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: Implement get_named_child_node fwnode callback
device property: Fix the length used in PROPERTY_ENTRY_STRING()
- Update the PM-runtime framework to use ktime instead of
jiffies for accounting (Thara Gopinath, Vincent Guittot).
- Optimize the autosuspend code in the PM-runtime framework
somewhat (Ladislav Michl).
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla).
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki).
- Add Jacobsville support to the intel_idle driver (Zhang Rui).
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam).
- Add new cpufreq driver for Armada 8K (Gregory Clement).
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar,
Amit Kucheria).
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar).
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria).
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar).
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang).
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki).
- Clean up multiple cpufreq drivers (Yangtao Li).
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn).
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann,
Matthias Kaehlcke).
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui).
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar).
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TSKG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are PM-runtime framework changes to use ktime instead of jiffies
for accounting, new PM core flag to mark devices that don't need any
form of power management, cpuidle updates including driver API
documentation and a new governor, cpufreq updates including a new
driver for Armada 8K, thermal cleanups and more, some energy-aware
scheduling (EAS) enabling changes, new chips support in the intel_idle
and RAPL drivers and assorted cleanups in some other places.
Specifics:
- Update the PM-runtime framework to use ktime instead of jiffies for
accounting (Thara Gopinath, Vincent Guittot)
- Optimize the autosuspend code in the PM-runtime framework somewhat
(Ladislav Michl)
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla)
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki)
- Add Jacobsville support to the intel_idle driver (Zhang Rui)
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)
- Add new cpufreq driver for Armada 8K (Gregory Clement)
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
Kucheria)
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria)
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar)
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang)
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki)
- Clean up multiple cpufreq drivers (Yangtao Li)
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn)
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
Kaehlcke)
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui)
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar)
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"
* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
cpufreq: Pass updated policy to driver ->setpolicy() callback
cpufreq: Fix two debug messages in cpufreq_set_policy()
cpufreq: Reorder and simplify cpufreq_update_policy()
cpufreq: Add kerneldoc comments for two core functions
PM / core: Add support to skip power management in device/driver model
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
cpufreq: intel_pstate: Avoid redundant initialization of local vars
powercap/intel_rapl: add Ice Lake mobile
ACPI / processor: Set P_LVL{2,3} idle state descriptions
cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
ACPI / CPPC: Add a helper to get desired performance
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
..
Add the sysfs reporting file for MDS. It exposes the vulnerability and
mitigation state similar to the existing files for the other speculative
hardware vulnerabilities.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jon Masters <jcm@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
There's only two changes here, one fix for conflicting attributes on the
rbtree node structure and the implementation of main status register
support in the interrupt code which supports chips that have a register
to cut down on the number of per-interrupt status registers that need to
be checked when handling interrupts.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9T5kTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JRLB/4+Te73Gvb0fFoVzZIxSjuLlxRul97K
6gLgUyxdXrPovBsNIN9r5lG5A0PstfdTs3vrDZfvGmOwQ2eG/Ae7TEb4pt/gF/Rs
KDIYQ6McygEzCEspr4xyR/MV6jIPTr/01YhvA8KsbyhB6kw50WA+QJX/dkrUdyUb
/MwluSWkbUQWHr+iJeLROxhyu2jF2X7Ymu66MVLXR8DHlkm3E5fKu1xPbqIvSA7n
el2j2pJYy4OJ3PQ/5LfASJr4+hEFERPZ1umcQRjXku/og03ZZXp72tyLp4Uz3cGA
Pel2ZF5fB6Lp0CkAXM1DqAALGchiHU6JNEnls3Brnjcovz2pS0nmDUuM
=rFCT
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There are only two changes here:
- fix for conflicting attributes on the rbtree node structure
- implementation of main status register support in the interrupt
code which supports chips that have a register to cut down on the
number of per-interrupt status registers that need to be checked
when handling interrupts"
* tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Remove attribute packed from struct 'regcache_rbtree_node'
regmap: regmap-irq: Add main status register support
* pm-core:
PM / core: Add support to skip power management in device/driver model
PM / suspend: Print debug messages for device using direct-complete
PM-runtime: update time accounting only when enabled
PM-runtime: Switch accounting over to ktime_get_mono_fast_ns()
PM-runtime: Optimize pm_runtime_autosuspend_expiration()
PM-runtime: Replace jiffies-based accounting with ktime-based accounting
PM-runtime: update accounting_timestamp on enable
PM: clock_ops: fix missing clk_prepare() return value check
drm/i915: Move on the new pm runtime interface
PM-runtime: Add new interface to get accounted time
* pm-sleep:
PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event()
* pm-qos:
PM: QoS: no need to check return value of debugfs_create functions
* pm-domains:
PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name()
PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()
PM: domains: no need to check return value of debugfs_create functions
* pm-em:
PM / EM: Expose the Energy Model in debugfs
In platform_device_register_full() the err_alloc label is
misleading, we only ever jump to it if the pdev is NULL,
but it then proceeds to free it, which is a no-op.
Remove the label and simply exit the function immediately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is intended for use with NVDIMMs that are physically persistent
(physically like flash) so that they can be used as a cost-effective
RAM replacement. Intel Optane DC persistent memory is one
implementation of this kind of NVDIMM.
Currently, a persistent memory region is "owned" by a device driver,
either the "Direct DAX" or "Filesystem DAX" drivers. These drivers
allow applications to explicitly use persistent memory, generally
by being modified to use special, new libraries. (DIMM-based
persistent memory hardware/software is described in great detail
here: Documentation/nvdimm/nvdimm.txt).
However, this limits persistent memory use to applications which
*have* been modified. To make it more broadly usable, this driver
"hotplugs" memory into the kernel, to be managed and used just like
normal RAM would be.
To make this work, management software must remove the device from
being controlled by the "Device DAX" infrastructure:
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
and then tell the new driver that it can bind to the device:
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
After this, there will be a number of new memory sections visible
in sysfs that can be onlined, or that may get onlined by existing
udev-initiated memory hotplug rules.
This rebinding procedure is currently a one-way trip. Once memory
is bound to "kmem", it's there permanently and can not be
unbound and assigned back to device_dax.
The kmem driver will never bind to a dax device unless the device
is *explicitly* bound to the driver. There are two reasons for
this: One, since it is a one-way trip, it can not be undone if
bound incorrectly. Two, the kmem driver destroys data on the
device. Think of if you had good data on a pmem device. It
would be catastrophic if you compile-in "kmem", but leave out
the "device_dax" driver. kmem would take over the device and
write volatile data all over your good data.
This inherits any existing NUMA information for the newly-added
memory from the persistent memory device that came from the
firmware. On Intel platforms, the firmware has guarantees that
require each socket's persistent memory to be in a separate
memory-only NUMA node. That means that this patch is not expected
to create NUMA nodes, but will simply hotplug memory into existing
nodes.
Because NUMA nodes are created, the existing NUMA APIs and tools
are sufficient to create policies for applications or memory areas
to have affinity for or an aversion to using this memory.
There is currently some metadata at the beginning of pmem regions.
The section-size memory hotplug restrictions, plus this small
reserved area can cause the "loss" of a section or two of capacity.
This should be fixable in follow-on patches. But, as a first step,
losing 256MB of memory (worst case) out of hundreds of gigabytes
is a good tradeoff vs. the required code to fix this up precisely.
This calculation is also the reason we export
memory_block_size_bytes().
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the provided fwnode is an OF node, set dev.of_node as well.
Also add an of_node_reused flag to struct platform_device_info and copy
this to the new device. This is needed to avoid pinctrl settings being
requested twice. See 4e75e1d7da ("driver core: add helper to reuse a
device-tree node") for a longer explanation.
Some drivers are just shims that create extra "glue" devices with the
DT device as parent and have the real driver bind to these. In these
cases, the glue device needs to get a reference to the original DT node
in order for the main driver to access properties and child nodes.
For example, the sunxi-musb driver creates such a glue device using
platform_device_register_full(). Consequently, devices attached to
this USB interface don't get associated with DT nodes, if present,
the way they do with EHCI.
This change will allow sunxi-musb and similar drivers to easily
propagate the DT node to child devices as required.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When no file /path was found, the error code of -ENOENT
enumerated in errno-base.h, is returned. Stating clearly that
the file was not found is much more useful for debugging, So
let's be explicit about that.
Signed-off-by: John Zhao <yuankuiz@codeaurora.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We only build devm_ioremap_resource() if HAS_IOMEM is selected, so this
dependency must cascade down to devm_platform_ioremap_resource().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are currently 1200+ instances of using platform_get_resource()
and devm_ioremap_resource() together in the kernel tree.
This patch wraps these two calls in a single helper. Thanks to that
we don't have to declare a local variable for struct resource * and can
omit the redundant argument for resource type. We also have one
function call less.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When rpm_resume() desactivates the autosuspend timer, it should only
try to cancel hrtimer but not wait for the handler to finish, because
both rpm_resume() and pm_suspend_timer_fn() take the power.lock.
A deadlock is possible as follows:
CPU0 CPU1
rpm_resume()
spin_lock_irqsave
pm_suspend_timer_fn()
spin_lock_irqsave
pm_runtime_deactivate_timer()
hrtimer_cancel()
It is sufficient to call hrtimer_try_to_cancel() from
pm_runtime_deactivate_timer(), because dev->power.timer_expires
reset to 0 by it, so use that function instead of hrtimer_cancel().
Fixes: 8234f6734c ("PM-runtime: Switch autosuspend over to using hrtimers")
Reported-by: Sunzhaosheng Sun(Zhaosheng) <sunzhaosheng@hisilicon.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We need 32ea33a044 ("mei: bus: export to_mei_cl_device for mei
client devices drivers") for the mei-hdcp patches.
References: https://lkml.org/lkml/2019/2/19/356
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is where all the related code already lives.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4c06c4e6cf ("driver core: Fix possible supplier PM-usage
counter imbalance") introduced a regression that causes suppliers
to be suspended prematurely for device links added during consumer
driver probe if the initial PM-runtime status of the consumer is
"suspended" and the consumer is resumed after adding the link and
before pm_runtime_put_suppliers() is called. In that case,
pm_runtime_put_suppliers() will drop the rpm_active refcount for
the link by one and (since rpm_active is equal to two after the
preceding consumer resume) the supplier's PM-runtime usage counter
will be decremented, which may cause the supplier to suspend even
though the consumer's PM-runtime status is "active".
For this reason, partially revert commit 4c06c4e6cf as the problem
it tried to fix needs to be addressed somewhat differently, and
change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so
that the latter only drops rpm_active references acquired by the
former. [This requires adding a new field to struct device_link,
but I coulnd't find a cleaner way to address the issue that would
work in all cases.]
This causes pm_runtime_put_suppliers() to effectively ignore device
links added during consumer probe, so device_link_add() doesn't need
to worry about ensuring that suppliers will remain active after
pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE
set and it only needs to bump up rpm_active by one for those links,
so pm_runtime_active_link() is not necessary any more.
Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Polish the kerneldoc a bit with suggestions from Randy.
v2: Randy found another typo: s/compent/component/
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All device objects in the driver model contain fields that control the
handling of various power management activities. However, it's not
always useful. There are few instances where pseudo devices are added
to the model just to take advantage of many other features like
kobjects, udev events, and so on. One such example is cpu devices and
their caches.
The sysfs for the cpu caches are managed by adding devices with cpu
as the parent in cpu_device_create() when secondary cpu is brought
online. Generally when the secondary CPUs are hotplugged back in as part
of resume from suspend-to-ram, we call cpu_device_create() from the cpu
hotplug state machine while the cpu device associated with that CPU is
not yet ready to be resumed as the device_resume() call happens bit
later. It's not really needed to set the flag is_prepared for cpu
devices as they are mostly pseudo device and hotplug framework deals
with state machine and not managed through the cpu device.
This often results in annoying warning when resuming:
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
cache: parent cpu1 should not be sleeping
CPU1 is up
CPU2: Booted secondary processor
cache: parent cpu2 should not be sleeping
CPU2 is up
.... and so on.
So in order to fix these kind of errors, we could just completely avoid
doing any power management related initialisations and operations if
they are not used by these devices.
Add no_pm flags to indicate that the device doesn't require any sort of
PM activities and all of them can be completely skipped. We can use the
same flag to also avoid adding not used *power* sysfs entries for these
devices. For now, lets use this for cpu cache devices.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As of the patch ("PM / Domains: Mark "name" const in
genpd_dev_pm_attach_by_name()") it's clear that the name in
dev_pm_domain_attach_by_name() can be const. Mark it as so. This
allows drivers to pass in a name that was declared "const" in a
driver.
Fixes: 27dceb81f4 ("PM / Domains: Introduce dev_pm_domain_attach_by_name()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The genpd_dev_pm_attach_by_name() simply takes the name and passes it
to of_property_match_string() where the argument is "const char *".
Adding a const here allows a later patch to add a const to
dev_pm_domain_attach_by_name() which allows drivers to pass in a name
that was declared "const" in a driver.
Fixes: 5d6be70add ("PM / Domains: Introduce option to attach a device by name to genpd")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This makes it possible to support drivers that use
fwnode_get_named_child_node() and device_get_named_child_node()
functions.
The node name is for now taken from a device property named
"name". That mimics the old style of naming of the nodes in
devicetree (though with modern flattened DT, the name is
matched against the actual node-name, it used to be done
with a property "name"). In Open Firmware DT the "name"
property is also still being used.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If connections between devices are described in OF graph or
ACPI device graph, we can find them by using the
fwnode_graph_*() functions.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Tested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the connections are defined in firmware, struct
device_connection will have the fwnode member pointing to
the device node (struct fwnode_handle) of the requested
device. The endpoint member for the device names will not be
used at all in that case.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Tested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Asynchronous driver probing can help much on kernel fastboot, and
this option can provide a flexible way to optimize and quickly verify
async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which
could use async probing while others don't. So we can't simply
turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this
cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html
* For SOC (System on Chip) with multiple spi or i2c controllers, most
of the slave spi/i2c devices will be assigned with fixed controller
number, while async probing may make those controllers get different
index for each boot, which prevents those controller drivers to be
async probed. For platforms not using these spi/i2c slave devices,
they can use this cmdline option to benefit from the async probing.
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices using the direct-complete optimization are not present it
debug messages printed by the core device suspend and resume code,
which sometimes makes it difficult to diagnose problems related to
them, so add debug messages for those devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a stateless device link to a certain supplier with
DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the
consumer driver's probe callback, the supplier's PM-runtime usage
counter will be nonzero after that which effectively causes the
supplier to remain "always on" going forward.
Namely, device_link_add() called to add the link invokes
device_link_rpm_prepare() which notices that the consumer driver is
probing, so it increments the supplier's PM-runtime usage counter
with the assumption that the link will stay around until
pm_runtime_put_suppliers() is called by driver_probe_device(),
but if the link goes away before that point, the supplier's
PM-runtime usage counter will remain nonzero.
To prevent that from happening, first rework pm_runtime_get_suppliers()
and pm_runtime_put_suppliers() to use the rpm_active refounts of device
links and make the latter only drop rpm_active and the supplier's
PM-runtime usage counter for each link by one, unless rpm_active is
one already for it. Next, modify device_link_add() to bump up the
new link's rpm_active refcount and the suppliers PM-runtime usage
counter by two, to prevent pm_runtime_put_suppliers(), if it is
called subsequently, from suspending the supplier prematurely (in
case its PM-runtime usage counter goes down to 0 in there).
Due to the way rpm_put_suppliers() works, this change does not
affect runtime suspend of the consumer ends of new device links (or,
generally, device links for which DL_FLAG_PM_RUNTIME has just been
set).
Fixes: e2f3cd831a ("driver core: Fix handling of runtime PM flags in device_link_add()")
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4080ab0830 ("PM-runtime: Take suppliers into account in
__pm_runtime_set_status()") introduced a race condition that may
trigger if __pm_runtime_set_status() is used incorrectly (that is,
if it is called when PM-runtime is enabled for the target device
and working).
In that case, if the original PM-runtime status of the device is
RPM_SUSPENDED, a runtime resume of the device may occur after
__pm_runtime_set_status() has dropped its power.lock spinlock
and before deactivating its suppliers, so the suppliers may be
deactivated while the device is PM-runtime-active which may lead
to functional issues.
To avoid that, modify __pm_runtime_set_status() to check whether
or not PM-runtime is enabled for the device before activating its
suppliers (if the new status is RPM_ACTIVE) and either return an
error if that's the case or increment the device's disable_depth
counter to prevent PM-runtime from being enabled for it while
the remaining part of the function is running (disable_depth is
then decremented on the way out).
Fixes: 4080ab0830 ("PM-runtime: Take suppliers into account in __pm_runtime_set_status()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI 5 added support for GpioInt resources as a way to provide
information about interrupts mediated via a GPIO controller.
Several device buses (e.g. SPI, I2C) have support for retrieving
an IRQ specified via this type of resource, and providing it
directly to the driver as an IRQ number.
This is not currently done for the platform drivers, as platform_get_irq()
does not try to parse GpioInt() resources. This requires drivers to
either have to support only one possible IRQ resource, or to have code
in place to try both as a failsafe.
While there is a possibility of ambiguity for devices that exposes
multiple IRQs, it is easy and feasible to support the common case
of devices that only expose one IRQ which would be of either type
depending on the underlying system's architecture.
This commit adds support for parsing a GpioInt resource in order
to fulfill a request for the index 0 IRQ for a platform device.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is needed by the new MEI-HDCP support in i915, so will need to go
in through drm and drivers-misc trees at least.
-----BEGIN PGP SIGNATURE-----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=IhHa
-----END PGP SIGNATURE-----
Merge tag 'topic/component-typed-2019-02-11' of git://anongit.freedesktop.org/drm/drm-intel into driver-core-next
Daniel writes:
typed componented support + i915/snd-hda changes
This is needed by the new MEI-HDCP support in i915, so will need to go
in through drm and drivers-misc trees at least.
* tag 'topic/component-typed-2019-02-11' of git://anongit.freedesktop.org/drm/drm-intel:
i915/snd_hdac: I915 subcomponent for the snd_hdac
components: multiple components for a device
component: Add documentation
Here are some driver core fixes for 5.0-rc6.
Well, not so much "driver core" as "debugfs". There's a lot of
outstanding debugfs cleanup patches coming in through different
subsystem trees, and in that process the debugfs core was found that it
really should return errors when something bad happens, to prevent
random files from showing up in the root of debugfs afterward. So
debugfs was fixed up to handle this properly, and then two fixes for
the relay and blk-mq code was needed as it was making invalid
assumptions about debugfs return values.
There's also a cacheinfo fix in here that resolves a tiny issue.
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXF069g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk0+gCgy9PTVAJR5ZbYtWTJOTdBnd7pfqMAoMuGxc+6
LLEbfSykLRxEf5SeOJun
=KP8e
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes for 5.0-rc6.
Well, not so much "driver core" as "debugfs". There's a lot of
outstanding debugfs cleanup patches coming in through different
subsystem trees, and in that process the debugfs core was found that
it really should return errors when something bad happens, to prevent
random files from showing up in the root of debugfs afterward. So
debugfs was fixed up to handle this properly, and then two fixes for
the relay and blk-mq code was needed as it was making invalid
assumptions about debugfs return values.
There's also a cacheinfo fix in here that resolves a tiny issue.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
blk-mq: protect debugfs_create_files() from failures
relay: check return of create_buf_file() properly
debugfs: debugfs_lookup() should return NULL if not found
debugfs: return error values, not NULL
debugfs: fix debugfs_rename parameter checking
cacheinfo: Keep the old value if of_property_read_u32 fails
Component framework is extended to support multiple components for
a struct device. These will be matched with different masters based on
its sub component value.
We are introducing this, as I915 needs two different components
with different subcomponent value, which will be matched to two
different component masters(Audio and HDCP) based on the subcomponent
values.
v2: Add documenation.
v3: Rebase on top of updated documenation.
v4: Review from Rafael:
- Remove redundant "This" from kerneldoc (also in the previous patch)
- Streamline the logic in find_component() a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1 code)
Signed-off-by: Ramalingam C <ramalingam.c@intel.com> (v1 commit message)
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-2-daniel.vetter@ffwll.ch
While typing these I think doing an s/component_master/aggregate/
would be useful:
- it's shorter :-)
- I think component/aggregate is much more meaningful naming than
component/puppetmaster or something like that. At least to my
English ear "aggregate" emphasizes much more the "assemble a pile of
things into something bigger" aspect, and there's not really much
of a control hierarchy between aggregate and constituing components.
But that's way more than a quick doc typing exercise ...
Thanks to Ram for commenting on an initial draft of these docs.
v2: Review from Rafael:
- git add Documenation/driver-api/component.rst
- lots of polish to the wording + spelling fixes.
v3: Review from Russell:
- s/framework/helper
- clarify the documentation for component_match_add functions.
v4: Remove a few superflous "This".
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "C, Ramalingam" <ramalingam.c@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-1-daniel.vetter@ffwll.ch
When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:
echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind
the kernel crashes with:
Unable to handle kernel paging request at virtual address ffffffbf029ffffc
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c
[ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in:
CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
pstate: 60400005 (nZCv daif +PAN -UAO)
pc : __free_pages+0x8/0x58
lr : __dma_direct_free_pages+0x50/0x5c
sp : ffffff801268baa0
x29: ffffff801268baa0 x28: 0000000000000000
x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0
x25: ffffffc6f9c60810 x24: 0000000000000000
x23: 00000000fffff000 x22: ffffff8012145000
x21: 0000000000000800 x20: ffffffbf029fffc8
x19: 0000000000000000 x18: ffffffc6f86c42c8
x17: 0000000000000000 x16: 0000000000000070
x15: 0000000000000003 x14: 0000000000000000
x13: ffffff801103d7f8 x12: 0000000000000028
x11: ffffff8011117604 x10: 0000000000009ad8
x9 : ffffff80110126d0 x8 : ffffffc6f7563000
x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018
x5 : ffffff8011cf3cc8 x4 : 0000000000004000
x3 : 0000000000080000 x2 : 0000000000000001
x1 : 0000000000000000 x0 : ffffffbf029fffc8
Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
Call trace:
__free_pages+0x8/0x58
__dma_direct_free_pages+0x50/0x5c
arch_dma_free+0x1c/0x98
dma_direct_free+0x14/0x24
dma_free_attrs+0x9c/0xdc
dmam_release+0x18/0x20
release_nodes+0x25c/0x28c
devres_release_all+0x48/0x4c
device_release_driver_internal+0x184/0x1f0
device_release_driver+0x14/0x1c
unbind_store+0x70/0xb8
drv_attr_store+0x24/0x34
sysfs_kf_write+0x4c/0x64
kernfs_fop_write+0x154/0x1c4
__vfs_write+0x34/0x164
vfs_write+0xb4/0x16c
ksys_write+0x5c/0xbc
__arm64_sys_write+0x14/0x1c
el0_svc_common+0x98/0x114
el0_svc_handler+0x1c/0x24
el0_svc+0x8/0xc
Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404)
---[ end trace 8c564cdd3a1a840f ]---
While I've bisected this to commit e8e683ae9a ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.
On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).
Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the target device has any suppliers, as reflected by device links
to them, __pm_runtime_set_status() does not take them into account,
which is not consistent with the other parts of the PM-runtime
framework and may lead to programming mistakes.
Modify __pm_runtime_set_status() to take suppliers into account by
activating them upfront if the new status is RPM_ACTIVE and
deactivating them on exit if the new status is RPM_SUSPENDED.
If the activation of one of the suppliers fails, the new status
will be RPM_SUSPENDED and the (remaining) suppliers will be
deactivated on exit (the child count of the device's parent
will be dropped too then).
Of course, adding device links locking to __pm_runtime_set_status()
means that it cannot be run fron interrupt context, so make it use
spin_lock_irq() and spin_unlock_irq() instead of spin_lock_irqsave()
and spin_unlock_irqrestore(), respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the accounting_timestamp field only when PM runtime is enabled
and don't forget to account the last state before disabling it.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Minor cleanups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Similar to what happened whith autosuspend, a deadlock has been
reported with PM-runtime accounting in the call path:
change_clocksource
...
write_seqcount_begin
...
timekeeping_update
...
sh_cmt_clocksource_enable
...
rpm_resume
update_pm_runtime_accounting
ktime_get
do
read_seqcount_begin
while read_seqcount_retry
....
write_seqcount_end
Make PM-runtime accounting use ktime_get_mono_fast_ns() to avoid this
problem.
With ktime_get_mono_fast_ns(), the timestamp is not guaranteed to be
monotonic across an update of timekeeping and as a result time can go
backward. Add a test to skip accounting for such situation which should
stay exceptional.
Fixes: a08c2a5a31 ("PM-runtime: Replace jiffies-based accounting with ktime-based accounting")
Reported-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject, changelog, comment cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_runtime_autosuspend_expiration calls ktime_get_mono_fast_ns()
even when its returned value may be unused. Therefore get the
current time later and remove gotos while there.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new device link flag, DL_FLAG_AUTOPROBE_CONSUMER, to request the
driver core to probe for a consumer driver automatically after binding
a driver to the supplier device on a persistent managed device link.
As unbinding the supplier driver on a managed device link causes the
consumer driver to be detached from its device automatically, this
flag provides a complementary mechanism which is needed to address
some "composite device" use cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though stateful device links are managed by the driver core in
principle, their creators are allowed and sometimes even expected
to drop references to them via device_link_del() or
device_link_remove(), but that doesn't really play well with the
"persistent" link concept.
If "persistent" managed device links are created from driver
probe callbacks, device_link_add() called to do that will take a
new reference on the link each time the callback runs and those
references will never be dropped, which kind of isn't nice.
This issues arises because of the link reference counting carried
out by device_link_add() for existing links, but that is only done to
avoid deleting device links that may still be necessary, which
shouldn't be a concern for managed (stateful) links. These device
links are managed by the driver core and whoever creates one of them
will need it at least as long as until the consumer driver is detached
from its device and deleting it may be left to the driver core just
fine.
For this reason, rework device_link_add() to apply the reference
counting to stateless links only and make device_link_del() and
device_link_remove() drop references to stateless links only too.
After this change, if called to add a stateful device link for
a consumer-supplier pair for which a stateful device link is
present already, device_link_add() will return the existing link
without incrementing its reference counter. Accordingly,
device_link_del() and device_link_remove() will WARN() and do
nothing when called to drop a reference to a stateful link. Thus,
effectively, all stateful device links will be owned by the driver
core.
In addition, clean up the handling of the link management flags,
DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_AUTOREMOVE_SUPPLIER, so that
(a) they are never set at the same time and (b) if device_link_add()
is called for a consumer-supplier pair with an existing stateful link
between them, the flags of that link will be combined with the flags
passed to device_link_add() to ensure that the life time of the link
is sufficient for all of the callers of device_link_add() for the
same consumer-supplier pair.
Update the device_link_add() kerneldoc comment to reflect the
above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling rpm_put_suppliers() from pm_runtime_drop_link() is excessive
as it affects all suppliers of the consumer device and not just the
one pointed to by the device link being dropped. Worst case it may
cause the consumer device to stop working unexpectedly. Moreover, in
principle it is racy with respect to runtime PM of the consumer
device.
To avoid these problems drop runtime PM references on the particular
supplier pointed to by the link in question only and do that after
the link has been dropped from the consumer device's list of links to
suppliers, which is in device_link_free().
Fixes: a0504aecba ("PM / runtime: Drop usage count for suppliers at device link removal")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, it is not valid to add a device link from a consumer
driver ->probe callback to a supplier that is still probing too, but
generally this is a valid use case. For example, if the consumer has
just acquired a resource that can only be available if the supplier
is functional, adding a device link to that supplier right away
should be safe (and even desirable arguably), but device_link_add()
doesn't handle that case correctly and the initial state of the link
created by it is wrong then.
To address this problem, change the initial state of device links
added between a probing supplier and a probing consumer to
DL_STATE_CONSUMER_PROBE and update device_links_driver_bound() to
skip such links on the supplier side.
With this change, if the supplier probe completes first,
device_links_driver_bound() called for it will skip the link state
update and when it is called for the consumer, the link state will
be updated to "active". In turn, if the consumer probe completes
first, device_links_driver_bound() called for it will change the
state of the link to "active" and when it is called for the
supplier, the link status update will be skipped.
However, in principle the supplier or consumer probe may still fail
after the link has been added, so modify device_links_no_driver() to
change device links in the "active" or "consumer probe" state to
"dormant" on the supplier side and update __device_links_no_driver()
to change the link state to "available" only if it is "consumer
probe" or "active".
Then, if the supplier probe fails first, the leftover link to the
probing consumer will become "dormant" and device_links_no_driver()
called for the consumer (when its probe fails) will clean it up.
In turn, if the consumer probe fails first, it will either drop the
link, or change its state to "available" and, in the latter case,
when device_links_no_driver() is called for the supplier, it will
update the link state to "dormant". [If the supplier probe fails,
but the consumer probe succeeds, which should not happen as long as
the consumer driver is correct, the link still will be around, but
it will be "dormant" until the supplier is probed again.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally without updating its flags. It is
possible, however, that the second (or any subsequent) caller of
device_link_add() for the same consumer-supplier pair will pass
DL_FLAG_PM_RUNTIME, possibly along with DL_FLAG_RPM_ACTIVE, in flags
to it and the existing link may not behave as expected then.
First, if DL_FLAG_PM_RUNTIME is not set in the existing link's flags
at all, it needs to be set like during the original initialization of
the link.
Second, if DL_FLAG_RPM_ACTIVE is passed to device_link_add() in flags
(in addition to DL_FLAG_PM_RUNTIME), the existing link should to be
updated to reflect the "active" runtime PM configuration of the
consumer-supplier pair and extra care must be taken here to avoid
possible destructive races with runtime PM of the consumer.
To that end, redefine the rpm_active field in struct device_link
as a refcount, initialize it to 1 and make rpm_resume() (for the
consumer) and device_link_add() increment it whenever they acquire
a runtime PM reference on the supplier device. Accordingly, make
rpm_suspend() (for the consumer) and pm_runtime_clean_up_links()
decrement it and drop runtime PM references to the supplier
device in a loop until rpm_active becones 1 again.
Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is incorrect to call pm_runtime_get_sync() under
device_links_write_lock(), because it may end up trying to take
device_links_read_lock() while resuming the target device and that
will deadlock in the non-SRCU case, so avoid that by resuming the
supplier device in device_link_add() before calling
device_links_write_lock().
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Fixes: baa8809f60 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally. However, if the flags passed to
it on the second (or any subsequent) attempt to create a device
link between the same consumer-supplier pair are not compatible with
the existing link's flags, that is incorrect.
First off, if the existing link is stateless and the next caller of
device_link_add() for the same consumer-supplier pair wants a
stateful one, or the other way around, the existing link cannot be
returned, because it will not match the expected behavior, so make
device_link_add() dump the stack and return NULL in that case.
Moreover, if the DL_FLAG_AUTOREMOVE_CONSUMER flag is passed to
device_link_add(), its caller will expect its reference to the link
to be dropped automatically on consumer driver removal, which will
not happen if that flag is not set in the link's flags (and
analogously for DL_FLAG_AUTOREMOVE_SUPPLIER). For this reason, make
device_link_add() update the existing link's flags accordingly
before returning it to the caller.
Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the list walk in device_links_driver_cleanup() to a safe one
to avoid use-after-free when dropping a link from the list during the
walk.
Also, while at it, fix device_link_add() to refuse to create
stateless device links with DL_FLAG_AUTOREMOVE_SUPPLIER set, which is
an invalid combination (setting that flag means that the driver core
should manage the link, so it cannot be stateless), and extend the
kerneldoc comment of device_link_add() to cover the
DL_FLAG_AUTOREMOVE_SUPPLIER flag properly too.
Fixes: 1689cac5b3 ("driver core: Add flag to autoremove device link on supplier unbind")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Silence warnings (triggered at W=1) by adding relevant __printf
attributes.
drivers/base/cpu.c:432:2: warning: function '__cpu_device_create' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current async_probe test code is only testing one device allocated
prior to driver load and only loading one device afterwards. Instead of
doing things this way it makes much more sense to load one device per CPU
in order to actually stress the async infrastructure. By doing this we
should see delays significantly increase in the event of devices being
serialized.
In addition I have updated the test to verify that we are trying to place
the work on the correct NUMA node when we are running in async mode. By
doing this we can verify the best possible outcome for device and driver
load times.
I have added a timeout value that is used to disable the sleep and instead
cause the probe routine to report an error indicating it timed out. By
doing this we limit the maximum runtime for the test to 20 seconds or less.
The last major change in this set is that I have gone through and tuned it
for handling the massive number of possible events that will be scheduled.
Instead of reporting the sleep for each individual device it is moved to
only being displayed if we enable debugging.
With this patch applied below are what a failing test and a passing test
should look like. I elided a few hundred lines in the failing test that
were duplicated since the system I was testing on had a massive number of
CPU cores:
-- Failing --
[ 243.524697] test_async_driver_probe: registering first set of asynchronous devices...
[ 243.535625] test_async_driver_probe: registering asynchronous driver...
[ 243.543038] test_async_driver_probe: registration took 0 msecs
[ 243.549559] test_async_driver_probe: registering second set of asynchronous devices...
[ 243.568350] platform test_async_driver.447: registration took 9 msecs
[ 243.575544] test_async_driver_probe: registering first synchronous device...
[ 243.583454] test_async_driver_probe: registering synchronous driver...
[ 248.825920] test_async_driver_probe: registration took 5235 msecs
[ 248.825922] test_async_driver_probe: registering second synchronous device...
[ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1
[ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1
[ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1
[ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1
[ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1
...
[ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1
[ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1
[ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1
[ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1
[ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1
[ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1
[ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs
[ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize
[ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1
[ 259.073786] test_async_driver test_async_driver.3: async probe took too long
[ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1
[ 259.089569] test_async_driver test_async_driver.4: async probe took too long
[ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1
[ 259.105338] test_async_driver test_async_driver.5: async probe took too long
[ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1
[ 259.121089] test_async_driver test_async_driver.6: async probe took too long
[ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1
[ 259.136850] test_async_driver test_async_driver.7: async probe took too long
...
[ 262.124062] test_async_driver test_async_driver.221: async probe took too long
[ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1
[ 262.140206] test_async_driver test_async_driver.222: async probe took too long
[ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1
[ 262.156351] test_async_driver test_async_driver.223: async probe took too long
[ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1
[ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings
-- Passing --
[ 105.419247] test_async_driver_probe: registering first set of asynchronous devices...
[ 105.432040] test_async_driver_probe: registering asynchronous driver...
[ 105.439718] test_async_driver_probe: registration took 0 msecs
[ 105.446239] test_async_driver_probe: registering second set of asynchronous devices...
[ 105.477986] platform test_async_driver.447: registration took 22 msecs
[ 105.485276] test_async_driver_probe: registering first synchronous device...
[ 105.493169] test_async_driver_probe: registering synchronous driver...
[ 110.597981] test_async_driver_probe: registration took 5097 msecs
[ 110.604806] test_async_driver_probe: registering second synchronous device...
[ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs
[ 115.715478] test_async_driver_probe: completed successfully
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the device specific version of the async_schedule commands to defer
various tasks related to power management. By doing this we should see a
slight improvement in performance as any device that is sensitive to
latency/locality in the setup will now be initializing on the node closest
to the device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call the asynchronous probe routines on a CPU local to the device node. By
doing this we should be able to improve our initialization time
significantly as we can avoid having to access the device from a remote
node which may introduce higher latency.
For example, in the case of initializing memory for NVDIMM this can have a
significant impact as initialing 3TB on remote node can take up to 39
seconds while initialing it on a local node only takes 23 seconds. It is
situations like this where we will see the biggest improvement.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Probe devices asynchronously instead of the driver. This results in us
seeing the same behavior if the device is registered before the driver or
after. This way we can avoid serializing the initialization should the
driver not be loaded until after the devices have already been added.
The motivation behind this is that if we have a set of devices that
take a significant amount of time to load we can greatly reduce the time to
load by processing them in parallel instead of one at a time. In addition,
each device can exist on a different node so placing a single thread on one
CPU to initialize all of the devices for a given driver can result in poor
performance on a system with multiple nodes.
This approach can reduce the time needed to scan SCSI LUNs significantly.
The only way to realize that speedup is by enabling more concurrency which
is what is achieved with this patch.
To achieve this it was necessary to add a new member "async_driver" to the
device_private structure to store the driver pointer while we wait on the
deferred probe call.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Try to consolidate all of the locking and unlocking of both the parent and
device when attaching or removing a driver from a given device.
To do that I first consolidated the lock pattern into two functions
__device_driver_lock and __device_driver_unlock. After doing that I then
created functions specific to attaching and detaching the driver while
acquiring these locks. By doing this I was able to reduce the number of
spots where we touch need_parent_lock from 12 down to 4.
This patch should produce no functional changes, it is meant to be a code
clean-up/consolidation only.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an additional bit flag to the device_private struct named "dead".
This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.
One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace jiffies-based accounting for runtime_active_time and
runtime_suspended_time with ktime-based accounting. This makes the
runtime debug counters inline with genpd and other PM subsytems which
use ktime-based accounting.
Timekeeping is initialized before driver_init(). It's only at that time
that PM-runtime can be enabled.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[switch from ktime to raw nsec]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Initializing accounting_timestamp to something different from 0 during
pm_runtime_init() doesn't make sense and puts an artificial ordering
constraint between timekeeping_init() and pm_runtime_init().
PM-runtime should start time accounting only when it is enabled and
discard the period when disabled.
Set accounting_timestamp to now when enabling PM-runtime.
Suggested-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A deadlock has been seen when swicthing clocksources which use
PM-runtime. The call path is:
change_clocksource
...
write_seqcount_begin
...
timekeeping_update
...
sh_cmt_clocksource_enable
...
rpm_resume
pm_runtime_mark_last_busy
ktime_get
do
read_seqcount_begin
while read_seqcount_retry
....
write_seqcount_end
Although we should be safe because we haven't yet changed the
clocksource at that time, we can't do that because of seqcount
protection.
Use ktime_get_mono_fast_ns() instead which is lock safe for such
cases.
With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be
monotonic across an update and as a result can goes backward.
According to update_fast_timekeeper() description: "In the worst
case, this can result is a slightly wrong timestamp (a few
nanoseconds)". For PM-runtime autosuspend, this means only that
the suspend decision may be slightly suboptimal.
Fixes: 8234f6734c ("PM-runtime: Switch autosuspend over to using hrtimers")
Reported-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On one hand commit 28644c809f ("regmap: Add the rbtree cache support")
added 'regcache_rbtree_node' as packed structure, while on the other hand
commit e977145aea ("[RBTREE] Add explicit alignment to sizeof(long)
for struct rb_node.") declared struct 'rb_node' as aligned.
Solve the ambiguity of placing aligned structure in a packed one by
removing the packed attribute from struct. This seems to be the behavior
of gcc anyway.
This removes the following warning (W=1):
drivers/base/regmap/regcache-rbtree.c:36:1: warning: alignment 1 of 'struct regcache_rbtree_node' is less than 4 [-Wpacked-not-aligned]
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This brings the kernel doc in line with the function signature.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is bunch of devices with multiple logical blocks which
can generate interrupts. It's not a rare case that the interrupt
reason registers are arranged so that there is own status/ack/mask
register for each logical block. In some devices there is also a
'main interrupt register(s)' which can indicate what sub blocks
have interrupts pending.
When such a device is connected via slow bus like i2c the main
part of interrupt handling latency can be caused by bus accesses.
On systems where it is expected that only one (or few) sub blocks
have active interrupts we can reduce the latency by only reading
the main register and those sub registers which have active
interrupts. Support this with regmap-irq for simple cases where
main register does not require acking or masking.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DL_FLAG_AUTOREMOVE_CONSUMER/SUPPLIER means "Remove the link
automatically on consumer/supplier driver unbind", that means we should
remove whole the device_link when there is no this driver no matter what
the ref_count of the link is.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On platforms making a fair use of regulators, the dev_info() messages
coming from the device link function are a bit too verbose. The amount
of message will increase further with the clock framework joining the
device link party.
These messages looks valuable for people debugging device link related
issues, so dev_dbg() looks more appropriate than dev_info().
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 448a5a552f ("drivers: base: cacheinfo: use OF
property_read_u32 instead of get_property,read_number") makes cache
size and number_of_sets be 0 if DT doesn't provide there values. I
think this is unreasonable so make them keep the old values, which is
the same as old kernels.
Fixes: 448a5a552f ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the 'firmware' directory only contains a single Makefile
to embed extra firmware into the kernel.
Move it to the more relevant place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The whole code of fallback_table.c is surrounded by #ifdef of
CONFIG_FW_LOADER_USER_HELPER.
Move the CONFIG_FW_LOADER_USER_HELPER switch to Makefile so that
it is not compiled at all when this CONFIG option is disabled.
I also removed the confusing comment, "Module or buit-in [sic]".
CONFIG_FW_LOADER_USER_HELPER is a boolean option.
(If it were a module, CONFIG_FW_LOADER_USER_HELPER_MODULE would
be defined instead.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cleanups for the way we handle type information introduced during
the merge window revealed that we'd been abusing the irq APIs for a long
time, causing breakage for systems. This pull request has a couple of
minimal fixes for that which restore the previous behaviour for the time
being, we'll fix it properly for v5.1 but that'd be a bit much to do as
a bug fix.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlxByIkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FErB/4/Od1iLnxAqb8dFmMFA/xbW8V/zmE3
8BLWUv8URhitdNPfdzWws+hD1AP5GfzoMyUiuP+BB6+x4JCBnL10vwAw7V0YYEox
NrVB9ALYdu7cGPu809cVqIretGxW28T8PsJehcoHDvSYLXaaIr36tHApIbWlT3bn
Sh166tTylLZG4bQ/KN0yEcNhyqqU6Lschp1CD7KSXux9jeMFxpQSCR9yJ2qhUbR4
igNayb4F8jCXU9R1WSD2pE3hTtsvTd/0i87HEzMq4jfSr3dck0dsW7tkewfe/MBl
1UM+6s46vqEl0u+9whJupDYvNr5ztF+wHnU85E6cX3gP442vk1sxnHaM
=HTMs
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"The cleanups for the way we handle type information introduced during
the merge window revealed that we'd been abusing the irq APIs for a
long time, causing breakage for systems.
This has a couple of minimal fixes for that which restore the previous
behaviour for the time being, we'll fix it properly for v5.1 but
that'd be a bit much to do as a bug fix"
* tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: do not write mask register if mask_base is zero
regmap: regmap-irq: silently ignore unsupported type settings
As the description of struct device_private says, it stores data which
is private to driver core. And it already has similar fields like:
knode_parent, knode_driver, knode_driver and knode_bus. This look it is
more proper to put knode_class together with those fields to make it
private to driver core.
This patch move device->knode_class to device_private to make it comply
with code convention.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_prepare() can fail, so check its status and if it fails,
issue an error message and change the clock_entry_status to
PCE_STATUS_ERROR.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some drivers (like i915/drm) needs to get the accounted suspended time.
pm_runtime_suspended_time() will return the suspended accounted time
in ns unit.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If client have not provided the mask base register then do not
write into the mask register.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.
Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.
Fixes: 8234f6734c (PM-runtime: Switch autosuspend over to using hrtimers)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c (PM-runtime: Switch autosuspend over to using hrtimers)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We are trying to get rid of BUS_ATTR() so drop the last user of it from
the tree. We had to "open code" it in order to prevent a function name
conflict due to the use of DEVICE_ATTR_WO() earlier in the file :(
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are trying to get rid of BUS_ATTR() and the usage of that in bus.c
can be trivially converted to use BUS_ATTR_WO and RW, so use those
macros instead.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs mount API prep from Al Viro:
"Mount API prereqs.
Mostly that's LSM mount options cleanups. There are several minor
fixes in there, but nothing earth-shattering (leaks on failure exits,
mostly)"
* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
smack: rewrite smack_sb_eat_lsm_opts()
smack: get rid of match_token()
smack: take the guts of smack_parse_opts_str() into a new helper
LSM: new method: ->sb_add_mnt_opt()
selinux: rewrite selinux_sb_eat_lsm_opts()
selinux: regularize Opt_... names a bit
selinux: switch away from match_token()
selinux: new helper - selinux_add_opt()
LSM: bury struct security_mnt_opts
smack: switch to private smack_mnt_opts
selinux: switch to private struct selinux_mnt_opts
LSM: hide struct security_mnt_opts from any generic code
selinux: kill selinux_sb_get_mnt_opts()
LSM: turn sb_eat_lsm_opts() into a method
nfs_remount(): don't leak, don't ignore LSM options quietly
btrfs: sanitize security_mnt_opts use
selinux; don't open-code a loop in sb_finish_set_opts()
LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
new helper: security_sb_eat_lsm_opts()
...
unreferenced object 0xffff808ec6dc5a80 (size 128):
comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
hex dump (first 32 bytes):
ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
[<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
[<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
[<00000000ef135642>] acpi_default_enumeration+0x34/0x78
[<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
[<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<000000002968643e>] acpi_bus_scan+0xb0/0x110
[<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
[<00000000965b3c5a>] acpi_init+0x408/0x49c
[<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
[<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
[<0000000070ea6c15>] kernel_init+0x18/0x138
[<00000000fb8fff06>] ret_from_fork+0x10/0x1c
[<0000000041273a0d>] 0xffffffffffffffff
Then, faddr2line pointed out this line,
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.
Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix two potential NULL pointer dereferences found by Coverity in
the software nodes code introduced recently (Colin Ian King).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=RZzu
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fixes from Rafael Wysocki:
"Fix two potential NULL pointer dereferences found by Coverity in the
software nodes code introduced recently (Colin Ian King)"
* tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
drivers: base: swnode: check if swnode is NULL before dereferencing it
drivers: base: swnode: check if pointer p is NULL before dereferencing it
Devfreq framework supports suspend of its devices.
Call the the devfreq interface and allow devfreq devices
preserve/restore their states during suspend/resume.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Drivers:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding
-----BEGIN PGP SIGNATURE-----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=5He5
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Driver updates:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding"
* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: rename core files
rtc: nvmem: fix possible use after free
rtc: add i.MX system controller RTC support
dt-bindings: fsl: scu: add rtc binding
rtc: pcf2123: Add Microcrystal rv2123
rtc: class: reimplement devm_rtc_device_register
rtc: enforce rtc_timer_init private_data type
rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
rtc: pcf85363: Add support for NXP pcf85263 rtc
dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
rtc: pcf8523: don't return invalid date when battery is low
dt-bindings: rtc: use a generic node name for ds1307
PM: Switch to use %ptR
m68k/mac: Switch to use %ptR
Input: hp_sdc_rtc - Switch to use %ptR
rtc: tegra: Switch to use %ptR
rtc: s5m: Switch to use %ptR
rtc: s3c: Switch to use %ptR
rtc: rx8025: Switch to use %ptR
rtc: rx6110: Switch to use %ptR
...
Do not return error if irq-type setting is requested for
controlloer which does not support this. This is how
regmap-irq has previously handled the undupported type
settings and existing drivers seem to be upset if failure
is now reported.
Fixes: 1c2928e3e3 ("regmap: regmap-irq/gpio-max77620: add level-irq support")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the "big" set of driver core patches for 4.21-rc1.
It's not really big, just a number of small changes for some reported
issues, some documentation updates to hopefully make it harder for
people to abuse the driver model, and some other minor cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCY/dA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZrgCeIi+rWj0mqlyKZk0A+gurH2BPmfwAniGfiHJp
w60Fr5/EbCqUr1d1wQIO
=4N7R
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 4.21-rc1.
It's not really big, just a number of small changes for some reported
issues, some documentation updates to hopefully make it harder for
people to abuse the driver model, and some other minor cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mm, memory_hotplug: update a comment in unregister_memory()
component: convert to DEFINE_SHOW_ATTRIBUTE
sysfs: Disable lockdep for driver bind/unbind files
driver core: Add missing dev->bus->need_parent_lock checks
kobject: return error code if writing /sys/.../uevent fails
driver core: Move async_synchronize_full call
driver core: platform: Respect return code of platform_device_register_full()
kref/kobject: Improve documentation
drivers/base/memory.c: Use DEVICE_ATTR_RO and friends
driver core: Replace simple_strto{l,ul} by kstrtou{l,ul}
kernfs: Improve kernfs_notify() poll notification latency
kobject: Fix warnings in lib/kobject_uevent.c
kobject: drop unnecessary cast "%llu" for u64
driver core: fix comments for device_block_probing()
driver core: Replace simple_strtol by kstrtoint
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for architectures
that have devices that perform DMA that is not cache coherent. Based
on the existing arm64 implementation and also used for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script.
-----BEGIN PGP SIGNATURE-----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=in72
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
"A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for
architectures that have devices that perform DMA that is not cache
coherent. Based on the existing arm64 implementation and also used
for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel
data leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script"
* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
dma-mapping: fix inverted logic in dma_supported
dma-mapping: deprecate dma_zalloc_coherent
dma-mapping: zero memory returned from dma_alloc_*
sparc/iommu: fix ->map_sg return value
sparc/io-unit: fix ->map_sg return value
arm64: default to the direct mapping in get_arch_dma_ops
PCI: Remove unused attr variable in pci_dma_configure
ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
dma-mapping: bypass indirect calls for dma-direct
vmd: use the proper dma_* APIs instead of direct methods calls
dma-direct: merge swiotlb_dma_ops into the dma_direct code
dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
dma-direct: improve addressability error reporting
swiotlb: remove dma_mark_clean
swiotlb: remove SWIOTLB_MAP_ERROR
ACPI / scan: Refactor _CCA enforcement
dma-mapping: factor out dummy DMA ops
dma-mapping: always build the direct mapping code
dma-mapping: move dma_cache_sync out of line
dma-mapping: move various slow path functions out of line
...
pages_correctly_probed is missing new lines which means that the line is
not printed rightaway but it rather waits for additional printks.
Add \n to all three messages in pages_correctly_probed.
Link: http://lkml.kernel.org/r/20181218162307.10518-1-mhocko@kernel.org
Fixes: b77eab7079 ("mm/memory_hotplug: optimize probe routine")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In cb5e39b803 ("drivers: base: refactor add_memory_section() to
add_memory_block()"), add_memory_block() is introduced, which is only
invoked in memory_dev_init().
When combining these two loops in memory_dev_init() and
add_memory_block(), they looks like this:
for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block)
for (j = i;
(j < i + sections_per_block) && j < NR_MEM_SECTIONS;
j++)
Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory
block, the check of (j < NR_MEM_SECTIONS) is not necessary.
This patch just removes this check.
Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The to_software_mode() macro can potentially return NULL, so also add
a NULL check on swnode before dereferencing it to avoid any NULL
pointer dereferences.
Detected by CoverityScan, CID#1476052 ("Explicit null dereferenced")
Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pointer p can be potentially NULL as macro to_software_node can
return NULL.
Add null check on p before dereferencing it to avoid any NULL pointer
dereferences.
Detected by CoverityScan, CID#1476039 ("Explicit null dereferenced")
Fixes: 59abd83672 (drivers: base: Introducing software nodes to the firmware node framework)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull irq updates from Thomas Gleixner:
"The interrupt department provides:
Core updates:
- Better spreading to NUMA nodes in the affinity management
- Support for more than one set of interrupts to spread out to allow
separate queues for separate functionality of a single device.
- Decouple the non queue interrupts from being managed. Those are
usually general interrupts for error handling etc. and those should
never be shut down. This also a preparation to utilize the
spreading mechanism for initial spreading of non-managed interrupts
later.
- Make the single CPU target selection in the matrix allocator more
balanced so interrupts won't accumulate on single CPUs in certain
situations.
- A large spell checking patch so we don't end up fixing single typos
over and over.
Driver updates:
- A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
- Updates for the 8MQ, F1C100s platform drivers
- A number of SPDX cleanups
- A workaround for a very broken GICv3 implementation on msm8996
which sports a botched register set.
- A platform-msi fix to prevent memory leakage
- Various cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
genirq/affinity: Add is_managed to struct irq_affinity_desc
genirq/core: Introduce struct irq_affinity_desc
genirq/affinity: Remove excess indentation
irqchip/stm32: protect configuration registers with hwspinlock
dt-bindings: interrupt-controller: stm32: Document hwlock properties
irqchip: Add driver for imx-irqsteer controller
dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer
irqchip: Add driver for Cirrus Logic Madera codecs
genirq: Fix various typos in comments
irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible
irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init()
irqchip/irq-imx-gpcv2: Silence "fall through" warning
irqchip/gic-v3: Add quirk for msm8996 broken registers
irqchip/gic: Add support to device tree based quirks
dt-bindings/gic-v3: Add msm8996 compatible string
irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
irqchip/sun4i: Move IC specific register offsets to struct
irqchip/sun4i: Add a struct to hold global variables
dt-bindings: interrupt-controller: Add suniv interrupt-controller
irqchip: Add RDA8810PL interrupt driver
...
- Introduce "software nodes", analogous to the DT and ACPI firmware
nodes except that they can be created by kernel code, in order to
complement fwnodes representing real firmware nodes when they are
incomplete (for example missing device properties) and to supply
the primary fwnode when the firmware lacks hardware description
for a device completely, and replace the "property_set" struct
fwnode_handle type with software nodes (Heikki Krogerus).
- Clean up the just introduced software nodes support and fix a commet
in the graph-handling code (Colin Ian King, Marco Felsch).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Z3Zj
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"This introduces 'software nodes' that are analogous to the DT and ACPI
firmware nodes except that they can be created by drivers themselves
and do a couple of assorted cleanups.
Specifics:
- Introduce "software nodes", analogous to the DT and ACPI firmware
nodes except that they can be created by kernel code, in order to
complement fwnodes representing real firmware nodes when they are
incomplete (for example missing device properties) and to supply
the primary fwnode when the firmware lacks hardware description for
a device completely, and replace the "property_set" struct
fwnode_handle type with software nodes (Heikki Krogerus).
- Clean up the just introduced software nodes support and fix a
commet in the graph-handling code (Colin Ian King, Marco Felsch)"
* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: fix fwnode_graph_get_next_endpoint() documentation
drivers: base: swnode: remove need for a temporary string for the node name
device property: Remove struct property_set
device property: Move device_add_properties() to swnode.c
drivers: base: Introducing software nodes to the firmware node framework
ACPI / glue: Add acpi_platform_notify() function
drivers core: Prepare support for multiple platform notifications
driver core: platform: Remove duplicated device_remove_properties() call
This has been a busy release for the regmap-irq code, there's several
new features been added, including an API cleanup for how we specify
types that affected one existing driver (gpio-max77620):
- Support for hardware that flags rising and falling edges on separate
status bits from Bartosz Golaszewski.
- Support for explicitly clearing interrupts before unmasking from
Bartosz Golaszewski.
- Support for level triggered IRQs from Matti Vaittinen.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhMAUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MI0B/9K27CbnGskQHZqWQxcFg1iVck/ZPty
kqfIGYDafvqT2TaVL+tFM8kzjLB3dMuV3cbywppq6+pzEvR/BDzhUKbskNPSLjUo
zNxKbwiBJPFLqlZORhzncuPcpRvrGGp120B+gr7lKOJgSG73u6bvOEzYaZbJzPb8
KiKo5oFqB/wpj3Gw243RjYE+7yaM/i7IAR/mW//RoKMWYERv6koR+GL0jgalib4d
mezH0ipO/SGDPorVOeUWxm/mlUYhEbitTa9+BtAYC/0+Nba1ns1p6dduchhXrAA0
/cOCHHVypPSiKLxjth+FA20CbemALb6swoZztVWYNS+0jJ2/bkh1rCoB
=aiDq
-----END PGP SIGNATURE-----
Merge tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a busy release for the regmap-irq code, there's several
new features been added, including an API cleanup for how we specify
types that affected one existing driver (gpio-max77620):
- Support for hardware that flags rising and falling edges on
separate status bits from Bartosz Golaszewski.
- Support for explicitly clearing interrupts before unmasking from
Bartosz Golaszewski.
- Support for level triggered IRQs from Matti Vaittinen"
* tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: add an option to clear status registers on unmask
regmap: regmap-irq/gpio-max77620: add level-irq support
regmap: regmap-irq: Remove default irq type setting from core
regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE
regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE
regmap: irq: handle HW using separate rising/falling edge interrupts
regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)
Only the mount namespace code that implements mount(2) should be using the
MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is
included.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
The remove_memory_block() function was renamed to in commit
cc292b0b43 ("drivers/base/memory.c: rename remove_memory_block() to
remove_memory_section()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some interrupt controllers whose interrupts are acked on read will set
the status bits for masked interrupts without changing the state of
the IRQ line.
Some chips have an additional "feature" where if those set bits are
not cleared before unmasking their respective interrupts, the IRQ
line will change the state and we'll interpret this as an interrupt
although it actually fired when it was masked.
Add a new field to the irq chip struct that tells the regmap irq chip
code to always clear the status registers before actually changing the
irq mask values.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add level active IRQ support to regmap-irq irqchip. Change breaks
existing regmap-irq type setting. Convert the existing drivers which
use regmap-irq with trigger type setting (gpio-max77620) to work
with this new approach. So we do not magically support level-active
IRQs on gpio-max77620 - but add support to the regmap-irq for chips
which support them =)
We do not support distinguishing situation where HW supports rising
and falling edge detection but not both. Separating this would require
inventing yet another flags for IRQ types.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The common code should not set IRQ type. Read HW defaults to the
cache at startup instead of forcing type to EDGE_BOTH. If
default setting is needed this should be done via normal
mechanisms or by chip specific code if normal mechanisms are not
suitable for some reason. Common regmap-irq code should not have
defaults hard-coded but keep the HW/boot defaults untouched.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the much more correct fix for my earlier attempt at:
https://lkml.org/lkml/2018/12/10/118
Short recap:
- There's not actually a locking issue, it's just lockdep being a bit
too eager to complain about a possible deadlock.
- Contrary to what I claimed the real problem is recursion on
kn->count. Greg pointed me at sysfs_break_active_protection(), used
by the scsi subsystem to allow a sysfs file to unbind itself. That
would be a real deadlock, which isn't what's happening here. Also,
breaking the active protection means we'd need to manually handle
all the lifetime fun.
- With Rafael we discussed the task_work approach, which kinda works,
but has two downsides: It's a functional change for a lockdep
annotation issue, and it won't work for the bind file (which needs
to get the errno from the driver load function back to userspace).
- Greg also asked why this never showed up: To hit this you need to
unregister a 2nd driver from the unload code of your first driver. I
guess only gpus do that. The bug has always been there, but only
with a recent patch series did we add more locks so that lockdep
built a chain from unbinding the snd-hda driver to the
acpi_video_unregister call.
Full lockdep splat:
[12301.898799] ============================================
[12301.898805] WARNING: possible recursive locking detected
[12301.898811] 4.20.0-rc7+ #84 Not tainted
[12301.898815] --------------------------------------------
[12301.898821] bash/5297 is trying to acquire lock:
[12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80
[12301.898841] but task is already holding lock:
[12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898856] other info that might help us debug this:
[12301.898862] Possible unsafe locking scenario:
[12301.898867] CPU0
[12301.898870] ----
[12301.898874] lock(kn->count#39);
[12301.898879] lock(kn->count#39);
[12301.898883] *** DEADLOCK ***
[12301.898891] May be due to missing lock nesting notation
[12301.898899] 5 locks held by bash/5297:
[12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0
[12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190
[12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240
[12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40
[12301.898960] stack backtrace:
[12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84
[12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[12301.898982] Call Trace:
[12301.898989] dump_stack+0x67/0x9b
[12301.898997] __lock_acquire+0x6ad/0x1410
[12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899010] ? find_held_lock+0x2d/0x90
[12301.899017] ? mutex_spin_on_owner+0xe4/0x150
[12301.899023] ? find_held_lock+0x2d/0x90
[12301.899030] ? lock_acquire+0x90/0x180
[12301.899036] lock_acquire+0x90/0x180
[12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899049] __kernfs_remove+0x296/0x310
[12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899060] ? kernfs_name_hash+0xd/0x80
[12301.899066] ? kernfs_find_ns+0x6c/0x100
[12301.899073] kernfs_remove_by_name_ns+0x3b/0x80
[12301.899080] bus_remove_driver+0x92/0xa0
[12301.899085] acpi_video_unregister+0x24/0x40
[12301.899127] i915_driver_unload+0x42/0x130 [i915]
[12301.899160] i915_pci_remove+0x19/0x30 [i915]
[12301.899169] pci_device_remove+0x36/0xb0
[12301.899176] device_release_driver_internal+0x185/0x240
[12301.899183] unbind_store+0xaf/0x180
[12301.899189] kernfs_fop_write+0x104/0x190
[12301.899195] __vfs_write+0x31/0x180
[12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80
[12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50
[12301.899216] ? __sb_start_write+0x13c/0x1a0
[12301.899221] ? vfs_write+0x17f/0x1b0
[12301.899227] vfs_write+0xb9/0x1b0
[12301.899233] ksys_write+0x50/0xc0
[12301.899239] do_syscall_64+0x4b/0x180
[12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[12301.899253] RIP: 0033:0x7f452ac7f7a4
[12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
[12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4
[12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001
[12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730
[12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d
[12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d
Looking around I've noticed that usb and i2c already handle similar
recursion problems, where a sysfs file can unbind the same type of
sysfs somewhere else in the hierarchy. Relevant commits are:
commit 356c05d58a
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Mon May 14 13:30:03 2012 -0400
sysfs: get rid of some lockdep false positives
commit e9b526fe70
Author: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Date: Fri May 17 14:56:35 2013 +0200
i2c: suppress lockdep warning on delete_device
Implement the same trick for driver bind/unbind.
v2: Put the macro into bus.c (Greg).
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define
such a macro, so remove define_genpd_open_function and
define_genpd_debugfs_fops.
Convert them to DEFINE_SHOW_ATTRIBUTE.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PM-runtime uses the timer infrastructure for autosuspend. This implies
that the minimum time before autosuspending a device is in the range
of 1 tick included to 2 ticks excluded
-On arm64 this means between 4ms and 8ms with default jiffies
configuration
-And on arm, it is between 10ms and 20ms
These values are quite high for embedded systems which sometimes want
the duration to be in the range of 1 ms.
It is possible to switch autosuspend over to using hrtimers to get
finer granularity for short durations and take advantage of slack to
retain some margins and get long timeouts with minimum wakeups.
On an arm64 platform that uses 1ms for autosuspending timeout of its
GPU, idle power is reduced by 10% with hrtimer.
The latency impact on arm64 hikey octo cores is:
- mark_last_busy: from 1.11 us to 1.25 us
- rpm_suspend: from 15.54 us to 15.38 us
[Only the code path of rpm_suspend() that starts hrtimer has been
measured.]
arm64 image (arm64 default defconfig) decreases by around 3KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
12034646 6869268 386840 19290754 1265a82 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
12030550 6870164 387032 19287746 1264ec2 vmlinux
The latency impact on arm 32bits snowball dual cores is :
- mark_last_busy: from 0.31 us usec to 0.77 us
- rpm_suspend: from 6.83 us to 6.67 usec
The increase of the image for snowball platform that I used for
testing performance impact, is neglictable (244B).
$ size vmlinux-timer
text data bss dec hex filename
7157961 2119580 264120 9541661 91981d build-ux500/vmlinux
size vmlinux-hrtimer
text data bss dec hex filename
7157773 2119884 264248 9541905 919911 vmlinux-hrtimer
And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
13304443 6803420 402768 20510631 138f7a7 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
13304299 6805276 402768 20512343 138fe57 vmlinux
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
__device_release_driver() has to check dev->bus->need_parent_lock
before dropping the parent lock and acquiring it again as it may
attempt to drop a lock that hasn't been acquired or lock a device
that shouldn't be locked and create a lock imbalance.
Fixes: 8c97a46af0 (driver core: hold dev's parent lock when needed)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sync documentation with code.
Fixes: 07bb80d40b (device property: Add support for remote endpoints)
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
- Updates for new (and old) platforms (i.MX8MQ, F1C100s)
- A number of SPDX cleanups
- A workaround for a very broken GICv3 implementation
- A platform-msi fix
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=1Mk9
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)
- Updates for new (and old) platforms (i.MX8MQ, F1C100s)
- A number of SPDX cleanups
- A workaround for a very broken GICv3 implementation
- A platform-msi fix
- Various cleanups
Pull more operating performance points (OPP) framework changes for v4.21
from Viresh Kumar:
"- Fix missing OPP debugfs directory (Viresh Kumar).
- Make genpd performance states orthogonal to idlestates (Ulf
Hansson).
- Propagate performance state changes from genpd to its master (Viresh
Kumar).
- Minor improvement of some OPP helpers (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
PM / Domains: Propagate performance state updates
PM / Domains: Factorize dev_pm_genpd_set_performance_state()
PM / Domains: Save OPP table pointer in genpd
OPP: Don't return 0 on error from of_get_required_opp_performance_state()
OPP: Add dev_pm_opp_xlate_performance_state() helper
OPP: Improve _find_table_of_opp_np()
PM / Domains: Make genpd performance states orthogonal to the idlestates
OPP: Fix missing debugfs supply directory for OPPs
OPP: Use opp_table->regulators to verify no regulator case
Currently a genpd only handles the performance state requirements from
the devices under its control. This commit extends that to also handle
the performance state requirement(s) put on the master genpd by its
sub-domains. There is a separate value required for each master that
the genpd has and so a new field is added to the struct gpd_link
(link->performance_state), which represents the link between a genpd and
its master. The struct gpd_link also got another field
prev_performance_state, which is used by genpd core as a temporary
variable during transitions.
On a call to dev_pm_genpd_set_performance_state(), the genpd core first
updates the performance state of the masters of the device's genpd and
then updates the performance state of the genpd. The masters do the same
and propagate performance state updates to their masters before updating
their own. The performance state transition from genpd to its master is
done with the help of dev_pm_opp_xlate_performance_state(), which looks
at the OPP tables of both the domains to translate the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Separate out _genpd_set_performance_state() and
_genpd_reeval_performance_state() from
dev_pm_genpd_set_performance_state() to handle performance state update
related stuff. This will be used by a later commit.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_pm_genpd_set_performance_state() will be required to call
dev_pm_opp_xlate_performance_state() going forward to translate from
performance state of a sub-domain to performance state of its master.
And dev_pm_opp_xlate_performance_state() needs pointers to the OPP
tables of both genpd and its master.
Lets fetch and save them while the OPP tables are added. Fetching the
OPP tables should never fail as we just added the OPP tables and so add
a WARN_ON() for such a bug instead of full error paths.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It's quite questionable whether genpd internally should care about if the
corresponding PM domain for a device is powered on, as to allow setting a
new performance state for it. The assumptions creates an unnecessary
limitation at this point, for both consumers and providers, but more
importantly it also makes the code more complicated.
Therefore, let's simplify the code to allow setting a performance state, by
invoking the ->set_performance_state() callback, no matter whether the PM
domain is powered on or off.
Do note, this change means genpd providers needs to restore the performance
state themselves during power on, via the ->power_on() callback. Moreover,
they may also need to check that the PM domain is powered on, from their
->set_performance_state() callback, before deciding to update the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Rather than checking the DMA attribute at each callsite, just pass it
through for acpi_dma_configure() to handle directly. That can then deal
with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly
installing dummy DMA ops instead of just skipping setup entirely. This
will then free up the dev->dma_ops == NULL case for some valuable
fastpath optimisations.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tony Luck <tony.luck@intel.com>
dma_get_required_mask should really be with the rest of the DMA mapping
implementation instead of in drivers/base as a lone outlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Some interrupt controllers use separate bits for controlling rising
and falling edge interrupts in the mask register i.e. they have one
interrupt for rising edge and one for falling.
We already handle the case where we have a single interrupt in the
mask register and a separate type configuration register.
Add a new switch to regmap_irq_chip which tells the framework to use
the mask_base address for configuring the edge of the interrupts that
define type_falling/rising_mask values.
For such interrupts we never update the type_base bits. For interrupts
that don't define type masks or their regmap irq chip doesn't set the
type_in_mask to true everything stays the same.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of platform MSI support, there were two helpers
supposed to allocate/free IRQs for a device:
platform_msi_domain_alloc_irqs()
platform_msi_domain_free_irqs()
In these helpers, IRQ descriptors are allocated in the "alloc" routine
while they are freed in the "free" one.
Later, two other helpers have been added to handle IRQ domains on top
of MSI domains:
platform_msi_domain_alloc()
platform_msi_domain_free()
Seen from the outside, the logic is pretty close with the former
helpers and people used it with the same logic as before: a
platform_msi_domain_alloc() call should be balanced with a
platform_msi_domain_free() call. While this is probably what was
intended to do, the platform_msi_domain_free() does not remove/free
the IRQ descriptor(s) created/inserted in
platform_msi_domain_alloc().
One effect of such situation is that removing a module that requested
an IRQ will let one orphaned IRQ descriptor (with an allocated MSI
entry) in the device descriptors list. Next time the module will be
inserted back, one will observe that the allocation will happen twice
in the MSI domain, one time for the remaining descriptor, one time for
the new one. It also has the side effect to quickly overshoot the
maximum number of allocated MSI and then prevent any module requesting
an interrupt in the same domain to be inserted anymore.
This situation has been met with loops of insertion/removal of the
mvpp2.ko module (requesting 15 MSIs each time).
Fixes: 552c494a76 ("platform-msi: Allow creation of a MSI-based stacked irq domain")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
