The netburst PMU is way different from the "architectural
perfomance monitoring" specification that current CPUs use.
P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle
perfomance monitoring events.
A few implementational details:
1) We need a separate x86_pmu::hw_config helper in struct
x86_pmu since register bit-fields are quite different from P6,
Core and later cpu series.
2) For the same reason is a x86_pmu::schedule_events helper
introduced.
3) hw_perf_event::config consists of packed ESCR+CCCR values.
It's allowed since in reality both registers only use a half
of their size. Of course before making a real write into a
particular MSR we need to unpack the value and extend it to
a proper size.
4) The tuple of packed ESCR+CCCR in hw_perf_event::config
doesn't describe the memory address of ESCR MSR register
so that we need to keep a mapping between these tuples
used and available ESCR (various P4 events may use same
ESCRs but not simultaneously), for this sake every active
event has a per-cpu map of hw_perf_event::idx <--> ESCR
addresses.
5) Since hw_perf_event::idx is an offset to counter/control register
we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel
strips it down to 8 registers and event armed may never be turned
off (ie the bit in active_mask is set but the loop never reaches
this index to check), thanks to Peter Zijlstra
Restrictions:
- No cascaded counters support (do we ever need them?)
- No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS
doesn't work for now)
- There are events with same counters which can't work simultaneously
(need to use intersected ones due to broken counter 1)
- No PERF_COUNT_HW_CACHE_ events yet
Todo:
- Implement dependent events
- Need proper hashing for event opcodes (no linear search, good for
debugging stage but not in real loads)
- Some events counted during a clock cycle -- need to set threshold
for them and count every clock cycle just to get summary statistics
(ie to behave the same way as other PMUs do)
- Need to swicth to use event_constraints
- To support RAW events we need to encode a global list of P4 events
into p4_templates
- Cache events need to be added
Event support status matrix:
Event status
-----------------------------
cycles works
cache-references works
cache-misses works
branch-misses works
bus-cycles partially (does not work on 64bit cpu with HT enabled)
instruction doesnt work (needs dependent event [mop tagging])
branches doesnt work
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100311165439.GB5129@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix typo. But the modularization here is ugly and should be improved.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The PEBS+LBR decoding magic needs the insn_get_length() infrastructure
to be able to decode x86 instruction length.
So split it out of KPROBES dependency and make it enabled when either
KPROBES or PERF_EVENTS is enabled.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pull the core handler in line with the nhm one, also make sure we always
drain the buffer.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We don't need checking_{wr,rd}msr() calls, since we should know what cpu
we're running on and not use blindly poke at msrs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we reset the LBR on each first counter, simple counter rotation which
first deschedules all counters and then reschedules the new ones will
lead to LBR reset, even though we're still in the same task context.
Reduce this by not flushing on the first counter but only flushing on
different task contexts.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to use the actual cpuc->pebs_enabled value, not a local copy for
the changes to take effect.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Its unclear if the PEBS state record will have only a single bit set, in
case it does not and accumulates bits, deal with that by only processing
each event once.
Also, robustify some of the code.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The documentation says we have to enable PEBS before we enable the PMU
proper.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should never call ->enable with the pmu enabled, and we _can_ have
->disable called with the pmu enabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should never call ->enable with the pmu enabled, and we _can_ have
->disable called with the pmu enabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I overlooked the perf_disable()/perf_enable() calls in
intel_pmu_handle_irq(), (pointed out by Markus) so we should not
explicitly disable_all/enable_all pebs counters in the drain functions,
these are already disabled and enabling them early is confusing.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Calling ioctl(PERF_EVENT_IOC_DISABLE) on a thottled counter would result
in a double disable, cure this by using x86_pmu_{start,stop} for
throttle/unthrottle and teach x86_pmu_stop() to check ->active_mask.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It turns out the LBR is massively unreliable on certain CPUs, so code the
fixup a little more defensive to avoid crashing the kernel.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100305154129.042271287@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some CPUs have errata where the LBR is not cleared on Power-On. So always
clear the LBRs before use.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100305154128.966563424@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This CPU has just too many handycaps to be really useful.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100305154128.890278662@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix up the ds allocation error path, where we could free @buffer before
we used it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100305154128.813452402@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since there's now two users for this, place it in a common header.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.923774125@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Saner PERF_CAPABILITIES support, which also exposes pebs_trap. Use that
latter to make PEBS's use of LBR conditional since a fault-like pebs
should already report the correct IP.
( As of this writing there is no known hardware that implements
!pebs_trap )
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.770650663@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the LBR to fix up the PEBS IP+1 issue.
As said, PEBS reports the next instruction, here we use the LBR to find
the last branch and from that construct the actual IP. If the IP matches
the LBR-TO, we use LBR-FROM, otherwise we use the LBR-TO address as the
beginning of the last basic block and decode forward.
Once we find a match to the current IP, we use the previous location.
This patch introduces a new ABI element: PERF_RECORD_MISC_EXACT, which
conveys that the reported IP (PERF_SAMPLE_IP) is the exact instruction
that caused the event (barring CPU errata).
The fixup can fail due to various reasons:
1) LBR contains invalid data (quite possible)
2) part of the basic block got paged out
3) the reported IP isn't part of the basic block (see 1)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.619375431@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement simple suport Intel Last-Branch-Record, it supports all
hardware that implements FREEZE_LBRS_ON_PMI, but does not (yet) implement
the LBR config register.
The Intel LBR is a FIFO of From,To addresses describing the last few
branches the hardware took.
This patch does not add perf interface to the LBR, but merely provides an
interface for internal use.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.544191154@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements support for Intel Precise Event Based Sampling,
which is an alternative counter mode in which the counter triggers a
hardware assist to collect information on events. The hardware assist
takes a trap like snapshot of a subset of the machine registers.
This data is written to the Intel Debug-Store, which can be programmed
with a data threshold at which to raise a PMI.
With the PEBS hardware assist being trap like, the reported IP is always
one instruction after the actual instruction that triggered the event.
This implements a simple PEBS model that always takes a single PEBS event
at a time. This is done so that the interaction with the rest of the
system is as expected (freq adjust, period randomization, lbr,
callchains, etc.).
It adds an ABI element: perf_event_attr::precise, which indicates that we
wish to use this (constrained, but precise) mode.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.392111285@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
hw_perf_enable() would enable already enabled events.
This causes problems with code that assumes that ->enable/->disable calls
are balanced (like the LBR code does).
What happens is that events that were already running and left in place
would get enabled again.
Avoid this by only enabling new events that match their previous
assignment.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
hw_perf_enable() would disable events that were not yet enabled.
This causes problems with code that assumes that ->enable/->disable calls
are balanced (like the LBR code does).
What happens is that we disable newly added counters that match their
previous assignment, even though they are not yet programmed on the
hardware.
Avoid this by only doing the first pass over the existing events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make sure n_added is properly accounted so that we can rely on the value
to reflect the number of added counters. This is needed if its going to
be used for more than a boolean check.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Calling ioctl(PERF_EVENT_IOC_DISABLE) on a thottled counter would result
in a double disable, cure this by using x86_pmu_{start,stop} for
throttle/unthrottle and teach x86_pmu_stop() to check ->active_mask.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no concurrency on these variables, so don't use LOCK'ed ops.
As to the intel_pmu_handle_irq() status bit clean, nobody uses that so
remove it all together.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100304140100.240023029@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pass the full perf_event into the x86_pmu functions so that those may
make use of more than the hw_perf_event, and while doing this, remove the
superfluous second argument.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100304140100.165166129@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The second and third argument to x86_perf_event_update() are superfluous
since they are simple expressions of the first argument. Hence remove
them.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100304140100.089468871@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The second and third argument to x86_perf_event_set_period() are
superfluous since they are simple expressions of the first argument.
Hence remove them.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100304140100.006500906@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug
notifiers. This has the advantage of reducing the static weak interface
as well as exposing all hotplug actions to the PMU.
Use this to fix x86 hotplug usage where we did things in ONLINE which
should have been done in UP_PREPARE or STARTING.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100305154128.736225361@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it easier to extend perf_sample_data and fixes a bug on arm
and sparc, which failed to set ->raw to NULL, which can cause crashes
when combined with PERF_SAMPLE_RAW.
It also optimizes PowerPC and tracepoint, because the struct
initialization is forced to zero out the whole structure.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jean Pihet <jpihet@mvista.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Jamie Iles <jamie.iles@picochip.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@kernel.org
LKML-Reference: <20100304140100.315416040@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits)
msi-laptop: depends on RFKILL
msi-laptop: Detect 3G device exists by standard ec command
msi-laptop: Add resume method for set the SCM load again
msi-laptop: Support some MSI 3G netbook that is need load SCM
msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command
msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
Driver core: create lock/unlock functions for struct device
sysfs: fix for thinko with sysfs_bin_attr_init()
sysfs: Kill unused sysfs_sb variable.
sysfs: Pass super_block to sysfs_get_inode
driver core: Use sysfs_rename_link in device_rename
sysfs: Implement sysfs_rename_link
sysfs: Pack sysfs_dirent more tightly.
sysfs: Serialize updates to the vfs inode
sysfs: windfarm: init sysfs attributes
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes
sysfs: Document sysfs_attr_init and sysfs_bin_attr_init
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
sysfs: Use one lockdep class per sysfs attribute.
sysfs: Only take active references on attributes.
...
Declare the smsgiucv prefix char pointer as "const" and use
use const char pointers in callback functions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
zfcp and qeth are setting flags for the qdio-layer, but these flags
are not used in qdio. Patch removes the flag definitions from qdio
and their settings in zfcp and qeth.
Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Cc: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This replaces direct xtime usage in the s390 arch with timekeeping accessors,
so we can further clean up the timekeeping core.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If there is no in kernel image caller modules will suffer:
ERROR: "copy_from_user_overflow" [net/core/pktgen.ko] undefined!
ERROR: "copy_from_user_overflow" [net/can/can-raw.ko] undefined!
ERROR: "copy_from_user_overflow" [fs/cifs/cifs.ko] undefined!
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
These are the non-static sysfs attributes that exist on
my test machine. Fix them to use sysfs_attr_init or
sysfs_bin_attr_init as appropriate. It simply requires
making a sysfs attribute present to see this. So this
is a little bit tedious but otherwise not too bad.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A pointer to a probe callback is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Cc: Paul Sokolovsky <pmiscml@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Constify struct sysfs_ops.
This is part of the ops structure constification
effort started by Arjan van de Ven et al.
Benefits of this constification:
* prevents modification of data that is shared
(referenced) by many other structure instances
at runtime
* detects/prevents accidental (but not intentional)
modification attempts on archs that enforce
read-only kernel data at runtime
* potentially better optimized code as the compiler
can assume that the const data cannot be changed
* the compiler/linker move const data into .rodata
and therefore exclude them from false sharing
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In linux-next "sysdev: Pass attribute in sysdev_class attributes show/store"
forgot to convert one place in s390 code. Here is the missing part.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.
Also drivers can extend the attributes with own data fields
and use that in the low level function.
Similar to sysdev_attributes and normal attributes.
This is a tree-wide sweep, converting everything in one go.
No functional changes in this patch other than passing the new
argument everywhere.
Tested on x86, the non x86 parts are uncompiled.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
sh: Convert sh to use read/update_persistent_clock
sh: Move PMB debugfs entry initialization to later stage
sh: Fix up flush_cache_vmap() on SMP.
sh: fix up MMU reset with variable PMB mapping sizes.
sh: establish PMB mappings for NUMA nodes.
sh: check for existing mappings for bolted PMB entries.
sh: fixed virt/phys mapping helpers for PMB.
sh: make pmb iomapping configurable.
sh: reworked dynamic PMB mapping.
sh: Fix up cpumask_of_pcibus() for the NUMA build.
serial: sh-sci: Tidy up build warnings.
sh: Fix up ctrl_read/write stragglers in migor setup.
serial: sh-sci: Add DMA support.
dmaengine: shdma: extend .device_terminate_all() to record partial transfer
sh: merge sh7722 and sh7724 DMA register definitions
sh: activate runtime PM for dmaengine on sh7722 and sh7724
dmaengine: shdma: add runtime PM support.
dmaengine: shdma: separate DMA headers.
dmaengine: shdma: convert to platform device resources
dmaengine: shdma: fix DMA error handling.
...
