Commit Graph

28 Commits

Author SHA1 Message Date
Dave Jones
acf4217555 [PATCH] remove dead code from elevator switching
We already drop the refcount in elevator_exit(), and as
we're setting 'e' to NULL, we'll never take that branch anyway.
Finally, as 'e' is a local var that isn't referenced afterwards,
setting it to NULL is pointless.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:38 +02:00
Jens Axboe
bc1c116974 [PATCH] elevator switching race
There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08 15:14:23 -07:00
Jens Axboe
dac07ec121 [BLOCK] limit request_fn recursion
Don't recurse back into the driver even if the unplug threshold is met,
when the driver asks for a requeue. This is both silly from a logical
point of view (requeues typically happen due to driver/hardware
shortage), and also dangerous since we could hit an endless request_fn
-> requeue -> unplug -> request_fn loop and crash on stack overrun.

Also limit blk_run_queue() to one level of recursion, similar to how
blk_start_queue() works.

This patch fixed a real problem with SLES10 and lpfc, and it could hit
any SCSI lld that returns non-zero from it's ->queuecommand() handler.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-11 12:38:59 -07:00
Adrian Bunk
4f73247f0e [PATCH] block/elevator.c: remove unused exports
This patch removes the following unused EXPORT_SYMBOL's:
- elv_requeue_request
- elv_completed_request

They are only used by the block core, hence they need not be exported.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-20 15:45:22 +02:00
OGAWA Hirofumi
9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Eric Sesterhenn
ce52449742 BUG_ON() Conversion in block/elevator.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:43:26 +01:00
Jens Axboe
2056a782f8 [PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-23 20:00:26 +01:00
Al Viro
e572ec7e4e [PATCH] fix rmmod problems with elevator attributes, clean them up 2006-03-18 22:27:18 -05:00
Al Viro
3d1ab40f4c [PATCH] elevator_t lifetime rules and sysfs fixes 2006-03-18 18:35:43 -05:00
Al Viro
e17a9489b4 [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:12 -05:00
Tejun Heo
30e9656cc3 [PATCH] block: implement elv_insert and use it (fix ordcolor flipping bug)
q->ordcolor must only be flipped on initial queueing of a hardbarrier
request.

Constructing ordered sequence and requeueing used to pass through
__elv_add_request() which flips q->ordcolor when it sees a barrier
request.

This patch separates out elv_insert() from __elv_add_request() and uses
elv_insert() when constructing ordered sequence and requeueing.
elv_insert() inserts the given request at the specified position and
does nothing else.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-08 07:52:58 -08:00
Tejun Heo
238e7db935 [PATCH] block: request_queue->ordcolor must not be flipped on SOFTBARRIER
q->ordcolor must not be flipped on SOFTBARRIER.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05 11:06:51 -08:00
Nate Diller
248d5ca5ed [BLOCK] elevator: allow default scheduler to potentially be modular
Jens has decided that allowing the default scheduler to be a module is
a bug, and should not be allowed under kconfig.  However, I find that
scenario useful for debugging, and wish for the kernel to be able to
handle this situation without OOPSing, if I enable such an option in
the .config directly.  This patch dynamically checks for the presence
of the compiled-in default, and falls back to no-op, emitting a
suitable error message, when the default is not available

Tested for a range of boot options on 2.6.16-rc1-mm2.

Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-24 10:09:14 +01:00
Nate Diller
5f00397644 [BLOCK] elevator: default choice selection
My previous default iosched patch did a poor job dealing with the
'elevator=' boot-time option.  The old behavior falls back to the
compiled-in default if the requested one is not registered at boot
time.  This patch dynamically evaluates which default
to use, and emits a suitable error message when the requested scheduler
is not available.  It also does the 'as' -> 'anticipatory' conversion
before elevator registration, which along with a modified registration
function, allows it to correctly indicate which default scheduler is
in use.

Tested for a range of boot options on 2.6.16-rc1-mm2.

Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-24 10:07:58 +01:00
Jens Axboe
b7bfcf7cbd [BLOCK] elevator: if specified scheduler is not found, fall back to default
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-16 09:48:58 +01:00
Chuck Ebbert
752a3b7963 [BLOCK] elevator: Make elevator=as work again for anticipatory
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-16 09:47:37 +01:00
Tejun Heo
1bc691d357 [PATCH] fix queue stalling while barrier sequencing
If ordered tag isn't supported, request ordering for barrier
sequencing is performed by queue draining, which basically hangs the
request queue until elv_completed_request() reports completion of all
previous fs requests.

The condition check in elv_completed_request() was only performed for
fs requests.  If a special request is queued between the last
to-be-drained request and the barrier sequence, draining is never
completed and the queue is stalled forever.

This patch moves the end-of-draining condition check such that it's
performed for all requests.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:05:39 -08:00
Coywolf Qi Hunt
769db45b73 make elv_try_merge() static, kill the dead declaration of
elv_try_last_merge().

Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-09 14:44:15 +01:00
Tejun Heo
797e7dbbee [BLOCK] reimplement handling of barrier request
Reimplement handling of barrier requests.

* Flexible handling to deal with various capabilities of
  target devices.
* Retry support for falling back.
* Tagged queues which don't support ordered tag can do ordered.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:51:03 +01:00
Tejun Heo
8ffdc6550c [BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()
add @uptodate argument to end_that_request_last() and @error
to rq_end_io_fn().  there's no generic way to pass error code
to request completion function, making generic error handling
of non-fs request difficult (rq->errors is driver-specific and
each driver uses it differently).  this patch adds @uptodate
to end_that_request_last() and @error to rq_end_io_fn().

for fs requests, this doesn't really matter, so just using the
same uptodate argument used in the last call to
end_that_request_first() should suffice.  imho, this can also
help the generic command-carrying request jens is working on.

Signed-off-by: tejun heo <htejun@gmail.com>
Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-06 09:49:03 +01:00
Coywolf Qi Hunt
eb97b73d75 [BLOCK] new block/ directory comment tidy
Some leftover comments referring to drivers/block that are now block/.
They don't add any information we don't already have, so kill them.

Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-18 21:59:31 +01:00
Tejun Heo
3beb207712 [BLOCK] elevator: elv_latter/former_request update
With generic dispatch queue update, implicit former/latter request
handling using rq->queuelist.prev/next doesn't work as expected
anymore.  Also, the only iosched dependent on this feature was
noop-iosched and it has been reimplemented to have its own
latter/former methods.  This patch removes implicit former/latter
handling.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:57:05 +01:00
Tejun Heo
be56123568 [BLOCK] fix string handling in elv_iosched_store
elv_iosched_store doesn't terminate string passed from userspace if
it's too long.  Also, if the written length is zero (probably not
possible), it accesses elevator_name[-1].  This patch fixes both bugs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:56:21 +01:00
Tejun Heo
15853af9f0 [BLOCK] Implement elv_drain_elevator for improved switch error detection
This patch adds request_queue->nr_sorted which keeps the number of
requests in the iosched and implement elv_drain_elevator which
performs forced dispatching.  elv_drain_elevator checks whether
iosched actually dispatches all requests it has and prints error
message if it doesn't.  As buggy forced dispatching can result in
wrong barrier operations, I think this extra check is worthwhile.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:56:06 +01:00
Tejun Heo
407df2aa29 [BLOCK] elevator: run queue in elevator_switch
elevator_dispatch needs to run queue after forced dispatching;
otherwise, the queue might stall.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:55:37 +01:00
Zachary Amsden
cff3ba2204 [BLOCK] elevator init fixes
In addition to the first patch, which is probably goodness, I found the
cause of my panic - applying this patch fixes it and now I am booting.
If the chosen_elevator[] is not found, fall back to noop.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:55:05 +01:00
Zachary Amsden
b8ea2cb512 [BLOCK] elevator init fixes
I got a panic in the elevator code, backtrace :

Unable to handle kernel NULL pointer dereference at virtual address 00000060
..
EIP is at elevator_put+0x0/0x30 (null elevator_type passed)
..
elevator_init+0x38
blk_init_queu_node+0xc9
floppy_init+0xdb
do_initcalls+0x23
init+0x10a
init+0x0

Clearly if the kmalloc here fails, e->elevator_type is not yet set; this
appears to be the correct fix, but I think I probably hit the second case
due to a race condition.  Someone more familiar with the elevator code
should look at this more closely until I can determine if I can reproduce.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-12 10:54:48 +01:00
Jens Axboe
3a65dfe8c0 [BLOCK] Move all core block layer code to new block/ directory
drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.

Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04 08:43:35 +01:00