Commit Graph

127 Commits

Author SHA1 Message Date
Vincent Chen
ad5d1122b8
riscv: use vDSO common flow to reduce the latency of the time-related functions
Even if RISC-V has supported the vDSO feature, the latency of the functions
for obtaining the system time is still expensive. It is because these
functions still trigger a corresponding system call in the process, which
slows down the response time. If we want to remove the system call to
reduce the latency, the kernel should have the ability to output the system
clock information to userspace. This patch introduces the vDSO common flow
to enable the kernel to achieve the above feature and uses "rdtime"
instruction to obtain the current time in the user space. Under this
condition, the latency cost by the ecall from U-mode to S-mode can be
eliminated. After applying this patch, the latency of gettimeofday()
measured on the HiFive unleashed board can be reduced by %61.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-10 19:47:16 -07:00
Anup Patel
e71ee06e3c
RISC-V: Force select RISCV_INTC for CONFIG_RISCV
The RISC-V per-HART local interrupt controller driver is mandatory
for all RISC-V system (with/without MMU) hence we force select it
for CONFIG_RISCV (just like RISCV_TIMER).

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-09 19:11:25 -07:00
Anup Patel
6b7ce8927b
irqchip: RISC-V per-HART local interrupt controller driver
The RISC-V per-HART local interrupt controller manages software
interrupts, timer interrupts, external interrupts (which are routed
via the platform level interrupt controller) and other per-HART
local interrupts.

We add a driver for the RISC-V local interrupt controller, which
eventually replaces the RISC-V architecture code, allowing for a
better split between arch code and drivers.

The driver is compliant with RISC-V Hart-Level Interrupt Controller
DT bindings located at:
Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt

Co-developed-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
[Palmer: Cleaned up warnings]
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2020-06-09 19:11:21 -07:00
Palmer Dabbelt
e8c7ef7d58
RISC-V: Sort select statements alphanumerically
Like patch b1b3f49 ("ARM: config: sort select statements alphanumerically")
, we sort all our select statements alphanumerically by using the perl
script in patch b1b3f49 as above.

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

Suggested-by: Zong Li <zong.li@sifive.com>
[Palmer: Re-ran the script, as there were predictably a bunch of conflicts]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-09 19:11:18 -07:00
Linus Torvalds
435faf5c21 RISC-V Patches for the 5.8 Merge Window, Part 1
* The remainder of the code necessary to support the Kendryte K210.
     * Support for building device trees into the kernel, as the K210 doesn't
       have a bootloader that provides one.
     * A K210 device tree and the associated defconfig update.
     * Support for skipping PMP initialization on systems that trap on PMP
       accesses rather than treating them as WARL.
 * Support for KGDB.
 * Improvements to text patching.
 * Some cleanups to the SiFive L2 cache driver.
 
 I may have a second part, but I wanted to get this out earlier rather than
 later as they've been ready to go for a while now.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl7YRtMTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYif+oD/4kaoQqmiw0VvyFjBlPT/TC7OPbaoXO
 5WBegSEAl+oOq+fUtjHomzn6HaTW2cPNexsqC/KuGP1/QL0OQ23T5O18LaCmrGMd
 CvELeAcvu6G4kbRuHwF0U16hBI2A1xIYVUJ8qmbuHPpEwVel3AsP2RIjQ+bOvm7g
 fVTIrlzl1s1eTsOXdOJb3sFZtISHb7o3lHZmcplDva3N13x8E0FrjuoJhHv0f2mj
 kcmZcy3sr8luAkwAJmbqmdPuwYTlteMnucXdCUv/kG2SaPkBwU5TS+MN7No2ylXH
 v4vxjkuSyJ1db72pla6uUB/cYD+mh2YI4tjjvH93s3k4I/GZMCrqivXZW2QtxBdt
 na++GxK8e4FrBG+VCCCQvx2mqugpMFMDnZDt36N2BqwjOtEzO3W8GqjrKCovXtQf
 farlgAiuFNVcoo7VFdpNZE+N5elQa0GWf57csCqqMNN4J8JLaOgyS7ByozJ9b9/A
 1x4g7kQANnMvYiYAeV+C2YfBcK6x8gHEPlWio1QZqirW5la34VUEWa18+rQeSRMz
 DArKPauCR1GuYZZVUkkDI8cXj0Gs5fTXsYmn+WsIpjFHnDYeYVe6Ocmczxyb3o3O
 lQwm7+drHlSmMvgrOlWJMrIUbdiomgelDU/iD4PiZzKozC52yKDS6A5gzoG6uZSM
 UleeAIeVG/TDCw==
 =keTq
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - The remainder of the code necessary to support the Kendryte K210:

     * Support for building device trees into the kernel, as the K210
       doesn't have a bootloader that provides one

     * A K210 device tree and the associated defconfig update

     * Support for skipping PMP initialization on systems that trap on
       PMP accesses rather than treating them as WARL

 - Support for KGDB

 - Improvements to text patching

 - Some cleanups to the SiFive L2 cache driver

* tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  soc: sifive: l2 cache: Mark l2_get_priv_group as static
  soc: sifive: l2 cache: Eliminate an unsigned zero compare warning
  riscv: Add support to determine no. of L2 cache way enabled
  riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure
  riscv: Use text_mutex instead of patch_lock
  riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation
  riscv: Remove the 'riscv_' prefix of function name
  riscv: Add SW single-step support for KDB
  riscv: Use the XML target descriptions to report 3 system registers
  riscv: Add KGDB support
  kgdb: Add kgdb_has_hit_break function
  RISC-V: Skip setting up PMPs on traps
  riscv: K210: Update defconfig
  riscv: K210: Add a built-in device tree
  riscv: Allow device trees to be built into the kernel
2020-06-04 20:14:18 -07:00
Zong Li
b422d28b21 riscv: support DEBUG_WX
Support DEBUG_WX to check whether there are mapping with write and execute
permission at the same time.

[akpm@linux-foundation.org: replace macros with C]
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/282e266311bced080bc6f7c255b92f87c1eb65d6.1587455584.git.zong.li@sifive.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:50 -07:00
Mike Rapoport
3f08a302f5 mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of
nodes and zones structures between the systems that have region to node
mapping in memblock and those that don't.

Currently all the NUMA architectures enable this option and for the
non-NUMA systems we can presume that all the memory belongs to node 0 and
therefore the compile time configuration option is not required.

The remaining few architectures that use DISCONTIGMEM without NUMA are
easily updated to use memblock_add_node() instead of memblock_add() and
thus have proper correspondence of memblock regions to NUMA nodes.

Still, free_area_init_node() must have a backward compatible version
because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is
different.  Once all the architectures will use the new semantics, the
entire compatibility layer can be dropped.

To avoid addition of extra run time memory to store node id for
architectures that keep memblock but have only a single node, the node id
field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and
the corresponding accessors presume that in those cases it is always 0.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:43 -07:00
Vincent Chen
d96575709c
riscv: Use the XML target descriptions to report 3 system registers
The $status, $badaddr, and $cause registers belong to the thread context,
so KGDB can obtain their contents from pt_regs in each trap. However, the
sequential number of these registers in the gdb register list is far from
the general-purpose registers. If riscv port uses the existing method to
report these three registers, many trivial registers with sequence numbers
in the middle of them will also be packaged to the reply packets. To solve
this problem, the riscv port wants to introduce the GDB target description
mechanism to customize the reported register list. By the list, the KGDB
can ignore the intermediate registers and just reports the general-purpose
registers and these three system registers.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-18 11:38:11 -07:00
Vincent Chen
fe89bd2be8
riscv: Add KGDB support
The skeleton of RISC-V KGDB port.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-18 11:38:10 -07:00
Palmer Dabbelt
2d2682512f
riscv: Allow device trees to be built into the kernel
Some systems don't provide a useful device tree to the kernel on boot.
Chasing around bootloaders for these systems is a headache, so instead
le't's just keep a device tree table in the kernel, keyed by the SOC's
unique identifier, that contains the relevant DTB.

This is only implemented for M mode right now. While we could implement
this via the SBI calls that allow access to these identifiers, we don't
have any systems that need this right now.

Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-18 11:38:05 -07:00
Kefeng Wang
69868418e1
riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
HUGETLBFS only used when MMU enabled, add the dependency.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12 17:41:24 -07:00
Kefeng Wang
21e2414083
riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
DEBUG_VIRTUAL should only used when MMU enabled, add the dependence.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12 17:22:03 -07:00
Damien Le Moal
a5fe13c7b4
riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU
ARCH_HAS_STRICT_KERNEL_RWX is not useful for NO-MMU systems.
Furthermore, has this option leads to very large boot image files on
64bits architectures, do not enable this option to allow supporting
no-mmu platforms such as the Kendryte K210 SoC based boards.

Fixes: 00cb41d5ad ("riscv: add alignment for text, rodata and data sections")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-24 11:40:40 -07:00
Linus Torvalds
c8372665b4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.

 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.

 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.

 4) Adjust icmp6 message source address selection when routes have a
    preferred source address set, from Tim Stallard.

 5) Be sure to validate HSR protocol version when creating new links,
    from Taehee Yoo.

 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
    non-initial namespaces, from Michael Weiß.

 7) Missing release firmware call in mlx5, from Eran Ben Elisha.

 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
    Taehee Yoo.

 9) Fix pause frame negotiation in marvell phy driver, from Clemens
    Gruber.

10) Record RX queue early enough in tun packet paths such that XDP
    programs will see the correct RX queue index, from Gilberto Bertin.

11) Fix double unlock in mptcp, from Florian Westphal.

12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.

13) marvell10g needs to soft reset PHY when coming out of low power
    mode, from Russell King.

14) Fix MTU setting regression in stmmac for some chip types, from
    Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  amd-xgbe: Use __napi_schedule() in BH context
  mISDN: make dmril and dmrim static
  net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
  net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
  tipc: fix incorrect increasing of link window
  Documentation: Fix tcp_challenge_ack_limit default value
  net: tulip: make early_486_chipsets static
  dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
  ipv6: remove redundant assignment to variable err
  net/rds: Use ERR_PTR for rds_message_alloc_sgs()
  net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
  selftests/bpf: Check for correct program attach/detach in xdp_attach test
  libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
  libbpf: Always specify expected_attach_type on program load if supported
  xsk: Add missing check on user supplied headroom size
  mac80211: fix channel switch trigger from unknown mesh peer
  mac80211: fix race in ieee80211_register_hw()
  net: marvell10g: soft-reset the PHY when coming out of low power
  net: marvell10g: report firmware version
  net/cxgb4: Check the return from t4_query_params properly
  ...
2020-04-16 14:52:29 -07:00
Linus Torvalds
eab4002660 RISC-V Patches for the 5.7 Merge Window, Part 1
This tag contains the patches I'd like to target for 5.7.  It has a handful of
 new features:
 
 * Partial support for the Kendryte K210.  There are still a few outstanding
   issues that I have patches for, but I don't actually have a board to test
   them so they're not included yet.
 * SBI v0.2 support.
 * Fixes to support for building with LLVM-based toolchains.  The resulting
   images are known not to boot yet.
 
 This builds and boots for me.  There is one merge conflict, it's just a Kconfig
 merge issue.  I can publish a resolved branch if you'd like.
 
 I don't anticipate a part two, but I'll probably have something early in the
 RCs to finish up the K210 support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl6OAAoTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiUqKEACidkNwwFf10hN6ojnIsBeh0mvZ0QuD
 qw5Uj0L5rmKdf84IRUGH8A3tyal39BoNz41Eo0mvZoInj542fVMArrqpAIKHN6e+
 GMOoHgeZO329zQYMqBX1RN/W9MV80KPKZcROeWkL+AbAmbQBaVRq08Ur1QIg2bHI
 84H0LzlCd1xz9k827ypOyz7ix4OYkli7DcUgdiPTK95CjaseALQXvSYA237lcXpB
 3g2L+/TDrjtGHn+vy3XWLJISY/BY4ZKfWN0UL4CJHvGuL61tJ+VRXaA3DQcBNd56
 7du41GTz9BU6J5wZTVnB5HstebwiXyP8pY34Pp8S4/wWyVdoi5hZ0Jn7sC9oDdnA
 r/CjawrGCZv6IEt69YA1edo3AoR13gXCbylRovdxVMRYa0OLmcTfFr843svTZzbQ
 ECSt6te2J2YwtYeLO6AlZeu2gBLW0Mxh5JBmiB8sy9C8tVlD/EFTYrnhEQnjUEVx
 wV76wfbeYL1be5IS4Tu/d0F5My6miIL+JafUND0bJQ7igp08po/YY4NIg/xyYlM2
 Aqie3MuTYlA3/I20N1K2mQkQnjKS4Y5AqNDj5povew2mPUvTGuLhZDZ/asKxdBIf
 BSq3V74V/Vc+qsh1d5IhUCDVthGYqBoJoBSUjcbItrpgmhLyvhbbSCLeF8ehDPeI
 Y9074bg5YH79pg==
 =P1DO
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains a handful of new features:

   - Partial support for the Kendryte K210.

     There are still a few outstanding issues that I have patches for,
     but I don't actually have a board to test them so they're not
     included yet.

   - SBI v0.2 support.

   - Fixes to support for building with LLVM-based toolchains. The
     resulting images are known not to boot yet.

  I don't anticipate a part two, but I'll probably have something early
  in the RCs to finish up the K210 support"

* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
  riscv: create a loader.bin boot image for Kendryte SoC
  riscv: Kendryte K210 default config
  riscv: Add Kendryte K210 device tree
  riscv: Select required drivers for Kendryte SOC
  riscv: Add Kendryte K210 SoC support
  riscv: Add SOC early init support
  riscv: Unaligned load/store handling for M_MODE
  RISC-V: Support cpu hotplug
  RISC-V: Add supported for ordered booting method using HSM
  RISC-V: Add SBI HSM extension definitions
  RISC-V: Export SBI error to linux error mapping function
  RISC-V: Add cpu_ops and modify default booting method
  RISC-V: Move relocate and few other functions out of __init
  RISC-V: Implement new SBI v0.2 extensions
  RISC-V: Introduce a new config for SBI v0.1
  RISC-V: Add SBI v0.2 extension definitions
  RISC-V: Add basic support for SBI v0.2
  RISC-V: Mark existing SBI as 0.1 SBI.
  riscv: Use macro definition instead of magic number
  riscv: Add support to dump the kernel page tables
  ...
2020-04-09 10:51:30 -07:00
Björn Töpel
93bbb2555b riscv, bpf: Remove BPF JIT for nommu builds
The BPF JIT fails to build for kernels configured to !MMU. Without an
MMU, the BPF JIT does not make much sense, therefore this patch
disables the JIT for nommu builds.

This was reported by the kbuild test robot:

   All errors (new ones prefixed by >>):

      arch/riscv/net/bpf_jit_comp64.c: In function 'bpf_jit_alloc_exec':
   >> arch/riscv/net/bpf_jit_comp64.c:1094:47: error: 'BPF_JIT_REGION_START' undeclared (first use in this function)
       1094 |  return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
            |                                               ^~~~~~~~~~~~~~~~~~~~
      arch/riscv/net/bpf_jit_comp64.c:1094:47: note: each undeclared identifier is reported only once for each function it appears in
   >> arch/riscv/net/bpf_jit_comp64.c:1095:9: error: 'BPF_JIT_REGION_END' undeclared (first use in this function)
       1095 |         BPF_JIT_REGION_END, GFP_KERNEL,
            |         ^~~~~~~~~~~~~~~~~~
      arch/riscv/net/bpf_jit_comp64.c:1098:1: warning: control reaches end of non-void function [-Wreturn-type]
       1098 | }
            | ^

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20200331101046.23252-1-bjorn.topel@gmail.com
2020-04-03 00:33:42 +02:00
Atish Patra
f1e58583b9
RISC-V: Support cpu hotplug
This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM
extension to online/offline any hart. As a result, the harts are
returned to firmware once they are offline. If the harts are brought
online afterwards, they re-enter Linux kernel as if a secondary hart
booted for the first time. All booting requirements are honored during
this process.

Tested both on QEMU and HighFive Unleashed board with. Test result follows.

---------------------------------------------------
Offline cpu 2
---------------------------------------------------
$ echo 0 > /sys/devices/system/cpu/cpu2/online
[   32.828684] CPU2: off
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48

---------------------------------------------------
online cpu 2
---------------------------------------------------
$ echo 1 > /sys/devices/system/cpu/cpu2/online
$ cat /proc/cpuinfo
processor       : 0
hart            : 0
isa             : rv64imafdcsu
mmu             : sv48

processor       : 1
hart            : 1
isa             : rv64imafdcsu
mmu             : sv48

processor       : 2
hart            : 2
isa             : rv64imafdcsu
mmu             : sv48

processor       : 3
hart            : 3
isa             : rv64imafdcsu
mmu             : sv48

processor       : 4
hart            : 4
isa             : rv64imafdcsu
mmu             : sv48

processor       : 5
hart            : 5
isa             : rv64imafdcsu
mmu             : sv48

processor       : 6
hart            : 6
isa             : rv64imafdcsu
mmu             : sv48

processor       : 7
hart            : 7
isa             : rv64imafdcsu
mmu             : sv48

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-31 11:28:30 -07:00
Atish Patra
efca139892
RISC-V: Introduce a new config for SBI v0.1
We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.

Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-31 11:25:40 -07:00
David S. Miller
f0b5989745 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor comment conflict in mac80211.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 21:25:29 -07:00
Zong Li
59c4da8640
riscv: Add support to dump the kernel page tables
In a similar manner to arm64, x86, powerpc, etc., it can traverse all
page tables, and dump the page table layout with the memory types and
permissions.

Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export
the page table layout to userspace.

Signed-off-by: Zong Li <zong.li@sifive.com>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 09:29:49 -07:00
Zong Li
d27c3c9081
riscv: add STRICT_KERNEL_RWX support
The commit contains that make text section as non-writable, rodata
section as read-only, and data section as non-executable.

The init section should be changed to non-executable.

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 09:24:45 -07:00
Zong Li
5fde3db5eb
riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support
ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap
pages for debugging purposes. Implement the __kernel_map_pages
functions to fill the poison pattern.

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 09:24:36 -07:00
Zong Li
395a21ff85
riscv: add ARCH_HAS_SET_DIRECT_MAP support
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for RISC-V.

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 09:24:33 -07:00
Zong Li
d3ab332a50
riscv: add ARCH_HAS_SET_MEMORY support
Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.

Use own set_memory.h rather than generic set_memory.h
(i.e. include/asm-generic/set_memory.h), because we want to add other
function prototypes here.

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-26 09:24:30 -07:00
Greentime Hu
adccfb1a80
riscv: uaccess should be used in nommu mode
It might have the unaligned access exception when trying to exchange data
with user space program. In this case, it failed in tty_ioctl(). Therefore
we should enable uaccess.S for NOMMU mode since the generic code doesn't
handle the unaligned access cases.

   0x8013a212 <tty_ioctl+462>:  ld      a5,460(s1)

[    0.115279] Oops - load address misaligned [#1]
[    0.115284] CPU: 0 PID: 29 Comm: sh Not tainted 5.4.0-rc5-00020-gb4c27160d562-dirty #36
[    0.115294] epc: 000000008013a212 ra : 000000008013a212 sp : 000000008f48dd50
[    0.115303]  gp : 00000000801cac28 tp : 000000008fb80000 t0 : 00000000000000e8
[    0.115312]  t1 : 000000008f58f108 t2 : 0000000000000009 s0 : 000000008f48ddf0
[    0.115321]  s1 : 000000008f8c6220 a0 : 0000000000000001 a1 : 000000008f48dd28
[    0.115330]  a2 : 000000008fb80000 a3 : 00000000801a7398 a4 : 0000000000000000
[    0.115339]  a5 : 0000000000000000 a6 : 000000008f58f0c6 a7 : 000000000000001d
[    0.115348]  s2 : 000000008f8c6308 s3 : 000000008f78b7c8 s4 : 000000008fb834c0
[    0.115357]  s5 : 0000000000005413 s6 : 0000000000000000 s7 : 000000008f58f2b0
[    0.115366]  s8 : 000000008f858008 s9 : 000000008f776818 s10: 000000008f776830
[    0.115375]  s11: 000000008fb840a8 t3 : 1999999999999999 t4 : 000000008f78704c
[    0.115384]  t5 : 0000000000000005 t6 : 0000000000000002
[    0.115391] status: 0000000200001880 badaddr: 000000008f8c63ec cause: 0000000000000004
[    0.115401] ---[ end trace 00d490c6a8b6c9ac ]---

This failure could be fixed after this patch applied.

[    0.002282] Run /init as init process
Initializing random number generator... [    0.005573] random: dd: uninitialized urandom read (512 bytes read)
done.

Welcome to Buildroot
buildroot login: root
Password:
Jan  1 00:00:00 login[62]: root login on 'ttySIF0'
~ #

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-18 18:44:30 -07:00
David S. Miller
44ef976ab3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-03-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).

The main changes are:

1) Add modify_return attach type which allows to attach to a function via
   BPF trampoline and is run after the fentry and before the fexit programs
   and can pass a return code to the original caller, from KP Singh.

2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
   objects to be visible in /proc/kallsyms so they can be annotated in
   stack traces, from Jiri Olsa.

3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
   in order to enable this for BPF based socket dispatch, from Lorenz Bauer.

4) Introduce a new bpftool 'prog profile' command which attaches to existing
   BPF programs via fentry and fexit hooks and reads out hardware counters
   during that period, from Song Liu. Example usage:

   bpftool prog profile id 337 duration 3 cycles instructions llc_misses

        4228 run_cnt
     3403698 cycles                                              (84.08%)
     3525294 instructions   #  1.04 insn per cycle               (84.05%)
          13 llc_misses     #  3.69 LLC misses per million isns  (83.50%)

5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
   of a new bpf_link abstraction to keep in particular BPF tracing programs
   attached even when the applicaion owning them exits, from Andrii Nakryiko.

6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
   and which returns the PID as seen by the init namespace, from Carlos Neira.

7) Refactor of RISC-V JIT code to move out common pieces and addition of a
   new RV32G BPF JIT compiler, from Luke Nelson.

8) Add gso_size context member to __sk_buff in order to be able to know whether
   a given skb is GSO or not, from Willem de Bruijn.

9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
   implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13 20:52:03 -07:00
Luke Nelson
5f316b65e9 riscv, bpf: Add RV32G eBPF JIT
This is an eBPF JIT for RV32G, adapted from the JIT for RV64G and
the 32-bit ARM JIT.

There are two main changes required for this to work compared to
the RV64 JIT.

First, eBPF registers are 64-bit, while RV32G registers are 32-bit.
BPF registers either map directly to 2 RISC-V registers, or reside
in stack scratch space and are saved and restored when used.

Second, many 64-bit ALU operations do not trivially map to 32-bit
operations. Operations that move bits between high and low words,
such as ADD, LSH, MUL, and others must emulate the 64-bit behavior
in terms of 32-bit instructions.

This patch also makes related changes to bpf_jit.h, such
as adding RISC-V instructions required by the RV32 JIT.

Supported features:

The RV32 JIT supports the same features and instructions as the
RV64 JIT, with the following exceptions:

- ALU64 DIV/MOD: Requires loops to implement on 32-bit hardware.

- BPF_XADD | BPF_DW: There's no 8-byte atomic instruction in RV32.

These features are also unsupported on other BPF JITs for 32-bit
architectures.

Testing:

- lib/test_bpf.c
test_bpf: Summary: 378 PASSED, 0 FAILED, [349/366 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED

The tests that are not JITed are all due to use of 64-bit div/mod
or 64-bit xadd.

- tools/testing/selftests/bpf/test_verifier.c
Summary: 1415 PASSED, 122 SKIPPED, 43 FAILED

Tested both with and without BPF JIT hardening.

This is the same set of tests that pass using the BPF interpreter
with the JIT disabled.

Verification and synthesis:

We developed the RV32 JIT using our automated verification tool,
Serval. We have used Serval in the past to verify patches to the
RV64 JIT. We also used Serval to superoptimize the resulting code
through program synthesis.

You can find the tool and a guide to the approach and results here:
https://github.com/uw-unsat/serval-bpf/tree/rv32-jit-v5

Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20200305050207.4159-3-luke.r.nels@gmail.com
2020-03-05 16:13:47 +01:00
Damien Le Moal
aa2734202a
riscv: Force flat memory model with no-mmu
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04 10:38:17 -08:00
Zong Li
6435f773d8
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping
check, and __pa_symbol used for kernel symbol check. In current RISC-V,
kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is
disable, these two functions calculate the offset on the address feded
directly without any checks.

The result of test_debug_virtual as follows:

[    0.358456] ------------[ cut here ]------------
[    0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000)
[    0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50
[    0.359409] Modules linked in:
[    0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57
[    0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0
[    0.360019]  gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660
[    0.360175]  t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0
[    0.360330]  s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000
[    0.360492]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358
[    0.360672]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[    0.360876]  s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0
[    0.361067]  s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008
[    0.361267]  s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630
[    0.361453]  s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0
[    0.361636]  t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e
[    0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003
[    0.362056] ---[ end trace aec0bf78d4978122 ]---
[    0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000
[    0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-23 10:40:06 -08:00
Olof Johansson
fc76324fa2
riscv: keep 32-bit kernel to 32-bit phys_addr_t
While rv32 technically has 34-bit physical addresses, no current platforms
use it and it's likely to shake out driver bugs.

Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up,
since other work will be needed to make such a system useful anyway.

PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22 13:10:01 -08:00
Nick Hu
8ad8b72721
riscv: Add KASAN support
This patch ports the feature Kernel Address SANitizer (KASAN).

Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.

There are currently two limitations in this port,

1. RV64 only: KASAN need large address space for extra shadow memory
region.

2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.

Signed-off-by: Nick Hu <nickhu@andestech.com>
Reported-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22 13:09:58 -08:00
Amanieu d'Antras
20bda4ed62
riscv: Implement copy_thread_tls
This is required for clone3 which passes the TLS value through a
struct rather than a register.

Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07 13:31:23 +01:00
Zong Li
0da310e82d riscv: gcov: enable gcov for RISC-V
This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03 00:47:02 -08:00
Andreas Schwab
0312a3d4b4 riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
In Kconfig files, config options are written without the CONFIG_ prefix.

Fixes: 6bd33e1ece ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20 03:32:24 -08:00
Linus Torvalds
a308a71022 generic ioremap support
- clean up various obsolete ioremap and iounmap variants
  - add a new generic ioremap implementation and switch csky, nds32 and
    riscv over to it
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3cKcsLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYO1CRAAwFQigsbi0CqqshPWnP0owKV+HA4Xfz/lQZsd7SM/
 BVXhKyDJQum6gp73dW025HCfjidTknsbdCUIP/LNUgAnop3lOlnB31/munDnJJ1H
 6hB1pc+zB9VgbOe0A6TxtxPRm5aE33k1hZIZS99lOh7mY3FvF7mbkkbVoCjdS3Cq
 a9bTX+X+esfUQ5GgaIc2zmz2GLkyFXIeVGs8/CoOX58ESCWQcVZrsQRompo4SgrI
 jqwf47NzdmK8hW4mZ+jdQUiWiAmNs5+2om7Bvi/deFAIFUo1/hLHvQzqEGramq/j
 5SPHax2gWAN3uWYP91QISkUAJWFydwgmUDoTO1M04ov4xLuBrqIQmc43tLjHo2UT
 RwMozWJWN+gkB9zTIboqMPi2qcuDaWcCij7LwHl5zLxPTcOKsrALarL55BQ8MipQ
 x6fpvskrQQvlArNTsRWFRUq0mCtkzE3wMZ9RR3AIETQL2hlAzB1S4gzhD+Z6WTYY
 pXNgkunonVGxwyN/7iJTEl/mvF/+MynGcWqhrwHZLqncyhn/WJJ2USH3nAD1+yjp
 v8v6UUeMXIjUsGAyfTjXy/WXAfwRuSC038AAFcmWKDdh08h4XvPHRficT4U8wr34
 7WzGizHP9f1CqrhYL/4exhPY9X2Yb7HhsFd0bZGG0rRvSillPUp0b8s++m12QuQU
 +VY=
 =ooiA
 -----END PGP SIGNATURE-----

Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap

Pull generic ioremap support from Christoph Hellwig:
 "This adds the remaining bits for an entirely generic ioremap and
  iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
  mess of weird ioremap variants we had with no users outside the arch
  code.

  For now just the three newest ports use the code, but there is more
  than a handful others that can be converted without too much work.

  Summary:

   - clean up various obsolete ioremap and iounmap variants

   - add a new generic ioremap implementation and switch csky, nds32 and
     riscv over to it"

* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
  nds32: use generic ioremap
  csky: use generic ioremap
  csky: remove ioremap_cache
  riscv: use the generic ioremap code
  lib: provide a simple generic ioremap implementation
  sh: remove __iounmap
  nios2: remove __iounmap
  hexagon: remove __iounmap
  m68k: rename __iounmap and mark it static
  arch: rely on asm-generic/io.h for default ioremap_* definitions
  asm-generic: don't provide ioremap for CONFIG_MMU
  asm-generic: ioremap_uc should behave the same with and without MMU
  xtensa: clean up ioremap
  x86: Clean up ioremap()
  parisc: remove __ioremap
  nios2: remove __ioremap
  alpha: remove the unused __ioremap wrapper
  hexagon: clean up ioremap
  ia64: rename ioremap_nocache to ioremap_uc
  unicore32: remove ioremap_cached
  ...
2019-11-28 10:57:12 -08:00
Linus Torvalds
6a0e20cd8c First set of RISC-V updates for v5.5-rc1
New features:
 
 - SECCOMP support
 
 - nommu support
 
 - SBI-less system support
 
 - M-Mode support
 
 - TLB flush optimizations
 
 Other improvements:
 
 - Pass the complete RISC-V ISA string supported by the CPU cores to
   userspace, rather than redacting parts of it in the kernel
 
 - Add platform DMA IP block data to the HiFive Unleashed board DT file
 
 - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
   compression formats, in line with other architectures
 
 Cleanups:
 
 - Remove unnecessary PTE_PARENT_SIZE macro
 
 - Standardize include guard naming across arch/riscv
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAl3dkMcACgkQx4+xDQu9
 KksoQA/+MZdtMrSe+j5yep7ZO803ivdS5tPCjNI06An2Ps8OJmJKoU8zSCIbygfM
 xIQ8R5KVLjd1DTW3SKNrL3bUsH0PdwGHKj69z0gMA01kGBe5CfJEzHw03U4It++t
 xaPAYJje99xtdEzZMro/Z+/Gsz/XM5SDZmY4i6quSlHOmL0HP6zftk3jPvxO+XtD
 7unQJSHuZElqs984OmR+6DUTiaIlJ4P+/xxlFydswq19/tDNCXpukLhMHkOND3W+
 3dBHAp9U18dz2I8lD3xlppVbvgCnud7z+xa+XY1Q/BluoYIEe6714S+9lr8TCdTP
 43wL9hSvbDPyaydnmKU7VqwdcWrbVQkA7H3GtxeiUZYvyDdidk9sARqg0n6uoedw
 48uRfeI0jCQXh6XdFNMCqNgYPpcpHY3isMKVCi2U6TT0fNdUUC3f62qsOIP0vQXh
 4hDys5JzIoBKv8nz/ap+1xzUluBt6FGmySPlTbd8ryn2m2Yd0EsHjywcEGRJMrlM
 KcOYgLAKcr9rRF4ap/NqQy74AvC+pOcDVeUHPD0WXYDRQn6L0wbp8YElzRf8W1BC
 b7osrRSNLfzC2LsEUEK+qYHrT4+cuWBbkuobAEHMY/OnLW1OKEifZQIdknAE1/yg
 n2qy4DuA6qta+Q1GiH8OOt9AEYHPw+SDP3+qFaJK5ZZMb3v565A=
 =nbwY
 -----END PGP SIGNATURE-----

Merge tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Paul Walmsley:
 "New features:
   - SECCOMP support
   - nommu support
   - SBI-less system support
   - M-Mode support
   - TLB flush optimizations

  Other improvements:
   - Pass the complete RISC-V ISA string supported by the CPU cores to
     userspace, rather than redacting parts of it in the kernel
   - Add platform DMA IP block data to the HiFive Unleashed board DT
     file
   - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
     compression formats, in line with other architectures

  Cleanups:
   - Remove unnecessary PTE_PARENT_SIZE macro
   - Standardize include guard naming across arch/riscv"

* tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
  riscv: provide a flat image loader
  riscv: add nommu support
  riscv: clear the instruction cache and all registers when booting
  riscv: read the hart ID from mhartid on boot
  riscv: provide native clint access for M-mode
  riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00
  riscv: add support for MMIO access to the timer registers
  riscv: implement remote sfence.i using IPIs
  riscv: cleanup the default power off implementation
  riscv: poison SBI calls for M-mode
  riscv: don't allow selecting SBI based drivers for M-mode
  RISC-V: Add multiple compression image format.
  riscv: clean up the macro format in each header file
  riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE
  riscv: abstract out CSR names for supervisor vs machine mode
  riscv: separate MMIO functions into their own header file
  riscv: enter WFI in default_power_off() if SBI does not shutdown
  RISC-V: Issue a tlb page flush if possible
  RISC-V: Issue a local tlbflush if possible.
  RISC-V: Do not invoke SBI call if cpumask is empty
  ...
2019-11-27 11:27:59 -08:00
Paul Walmsley
5ba9aa56e6 Merge branch 'next/nommu' into for-next
Conflicts:
	arch/riscv/boot/Makefile
	arch/riscv/include/asm/sbi.h
2019-11-22 18:59:09 -08:00
Christoph Hellwig
6bd33e1ece riscv: add nommu support
The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.

Most of the patch is just stubbing out code not needed without page
tables, but there is an interesting detail in the signals implementation:

 - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
   entry point, but the ELF VDSO is not supported for nommu Linux.
   We instead copy the code to call the syscall onto the stack.

In addition to enabling the nommu code a new defconfig for a small
kernel image that can run in nommu mode on qemu is also provided, to run
a kernel in qemu you can use the following command line:

qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
	-kernel arch/riscv/boot/loader \
	-drive file=rootfs.ext2,format=raw,id=hd0 \
	-device virtio-blk-device,drive=hd0

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards
 around PCI_IOBASE definition to fix build issues; fixed checkpatch
 issues; move the PCI_IO_* and VMEMMAP address space macros along
 with the others; resolve sparse warning]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-17 15:17:39 -08:00
Ard Biesheuvel
c12d3362a7 int128: move __uint128_t compiler test to Kconfig
In order to use 128-bit integer arithmetic in C code, the architecture
needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
and it requires a version of the toolchain that supports this at build
time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
whether __SIZEOF_INT128__ is defined, since this is only the case for
compilers that can support 128-bit integers.

Let's fold this additional test into the Kconfig declaration of
ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
e.g., to decide whether a certain object needs to be included in the
first place.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-17 09:02:42 +08:00
Damien Le Moal
eded8bc66a riscv: don't allow selecting SBI based drivers for M-mode
When running in M-mode we can't use SBI based drivers.  Add a new
CONFIG_RISCV_SBI that drivers that do SBI calls can depend on
instead.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-13 13:20:02 -08:00
Christoph Hellwig
38af578253 riscv: use the generic ioremap code
Use the generic ioremap code instead of providing a local version.
Note that this relies on the asm-generic no-op definition of
pgprot_noncached.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # rv32, rv64 boot
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
2019-11-11 21:18:20 +01:00
Christoph Hellwig
a4c3733d32 riscv: abstract out CSR names for supervisor vs machine mode
Many of the privileged CSRs exist in a supervisor and machine version
that are used very similarly.  Provide versions of the CSR names and
fields that map to either the S-mode or M-mode variant depending on
a new CONFIG_RISCV_M_MODE kconfig symbol.

Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>
and Paul Walmsley <paul.walmsley@sifive.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-05 09:20:42 -08:00
David Abdurachmanov
5340627e3f riscv: add support for SECCOMP and SECCOMP_FILTER
This patch was extensively tested on Fedora/RISCV (applied by default on
top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
on QEMU and SiFive Unleashed board.

libseccomp (userspace) was rebased:
https://github.com/seccomp/libseccomp/pull/134

Fully passes libseccomp regression testing (simulation and live).

There is one failing kernel selftest: global.user_notification_signal

v1 -> v2:
  - return immediately if secure_computing(NULL) returns -1
  - fixed whitespace issues
  - add missing seccomp.h
  - remove patch #2 (solved now)
  - add riscv to seccomp kernel selftest

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: keescook@chromium.org
Cc: me@carlosedp.com
Tested-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/linux-riscv/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-riscv/CAJr-aD=UnCN9E_mdVJ2H5nt=6juRSWikZnA5HxDLQxXLbsRz-w@mail.gmail.com/
[paul.walmsley@sifive.com: cleaned up Cc: lines; fixed spelling and
 checkpatch issues; updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-29 11:32:10 -07:00
Alexandre Ghiti
54c95a11cc riscv: make mmap allocation top-down by default
In order to avoid wasting user address space by using bottom-up mmap
allocation scheme, prefer top-down scheme when possible.

Before:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
00018000-00039000 rw-p 00000000 00:00 0          [heap]
1555556000-155556d000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
155556d000-155556e000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
155556e000-155556f000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
155556f000-1555570000 rw-p 00000000 00:00 0
1555570000-1555572000 r-xp 00000000 00:00 0      [vdso]
1555574000-1555576000 rw-p 00000000 00:00 0
1555576000-1555674000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
1555674000-1555678000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
1555678000-155567a000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
155567a000-15556a0000 rw-p 00000000 00:00 0
3fffb90000-3fffbb1000 rw-p 00000000 00:00 0      [stack]

After:
root@qemuriscv64:~# cat /proc/self/maps
00010000-00016000 r-xp 00000000 fe:00 6389       /bin/cat.coreutils
00016000-00017000 r--p 00005000 fe:00 6389       /bin/cat.coreutils
00017000-00018000 rw-p 00006000 fe:00 6389       /bin/cat.coreutils
2de81000-2dea2000 rw-p 00000000 00:00 0          [heap]
3ff7eb6000-3ff7ed8000 rw-p 00000000 00:00 0
3ff7ed8000-3ff7fd6000 r-xp 00000000 fe:00 7187   /lib/libc-2.28.so
3ff7fd6000-3ff7fda000 r--p 000fd000 fe:00 7187   /lib/libc-2.28.so
3ff7fda000-3ff7fdc000 rw-p 00101000 fe:00 7187   /lib/libc-2.28.so
3ff7fdc000-3ff7fe2000 rw-p 00000000 00:00 0
3ff7fe4000-3ff7fe6000 r-xp 00000000 00:00 0      [vdso]
3ff7fe6000-3ff7ffd000 r-xp 00000000 fe:00 7193   /lib/ld-2.28.so
3ff7ffd000-3ff7ffe000 r--p 00016000 fe:00 7193   /lib/ld-2.28.so
3ff7ffe000-3ff7fff000 rw-p 00017000 fe:00 7193   /lib/ld-2.28.so
3ff7fff000-3ff8000000 rw-p 00000000 00:00 0
3fff888000-3fff8a9000 rw-p 00000000 00:00 0      [stack]

[alex@ghiti.fr: v6]
  Link: http://lkml.kernel.org/r/20190808061756.19712-15-alex@ghiti.fr
Link: http://lkml.kernel.org/r/20190730055113.23635-15-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>	[arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:12 -07:00
Linus Torvalds
d7b0827f28 Kbuild updates for v5.4
- add modpost warn exported symbols marked as 'static' because 'static'
    and EXPORT_SYMBOL is an odd combination
 
  - break the build early if gold linker is used
 
  - optimize the Bison rule to produce .c and .h files by a single
    pattern rule
 
  - handle PREEMPT_RT in the module vermagic and UTS_VERSION
 
  - warn CONFIG options leaked to the user-space except existing ones
 
  - make single targets work properly
 
  - rebuild modules when module linker scripts are updated
 
  - split the module final link stage into scripts/Makefile.modfinal
 
  - fix the missed error code in merge_config.sh
 
  - improve the error message displayed on the attempt of the O= build
    in unclean source tree
 
  - remove 'clean-dirs' syntax
 
  - disable -Wimplicit-fallthrough warning for Clang
 
  - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
 
  - remove ARCH_{CPP,A,C}FLAGS variables
 
  - add $(BASH) to run bash scripts
 
  - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
    instead of the basename
 
  - stop suppressing Clang's -Wunused-function warnings when W=1
 
  - fix linux/export.h to avoid genksyms calculating CRC of trimmed
    exported symbols
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl1+OnoeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGoKEQAKcid9lDacMe5KWT
 4Ic93hANMFKZ9Qy8WoxivnOr1a93NcloZ0Bhka96QUt7hYUkLmDCs99eMbxKuMfP
 m/ViHepojOBPzq+VtAGWOiIyPMCA7XDrTPph4wcPDKeOURTreK1PZ20fxDoAR4to
 +qaqKZJGdRcNf2DpJN1yIosz8Wj0Sa2LQrRi9jgUHi3bzgvLfL7P9WM2xyZMggAc
 GaSktCEFL0UzMFlMpYyDrKh2EV6ryOnN8+bVAKbmWP89tuU3njutycKdWOoL+bsj
 tH2kjFThxQyIcZGNHS1VzNunYAFE2q5nj2q47O1EDN6sjTYUoRn5cHwPam6x3Kly
 NH88xDEtJ7sUUc9GZEIXADWWD0f08QIhAH5x+jxFg3529lNgyrNHRSQ2XceYNAnG
 i/GnMJ0EhODOFKusXw7sNlWFKtukep+8/pwnvfTXWQu6plEm5EQ3a3RL5SESubVo
 mHzXsQDFCE0x/UrsJxEAww+3YO3pQEelfVi74W9z0cckpbRF8FuUq/69ltOT15l4
 X+gCz80lXMWBKw/kNoR4GQoAJo3KboMEociawwoj72HXEHTPLJnCdUOsAf3n+opj
 xuz/UPZ4WYSgKdnbmmDbJ+1POA1NqtARZZXpMVyKVVCOiLafbJkLQYwLKEpE2mOO
 TP9igzP1i3/jPWec8cJ6Fa8UwuGh
 =VGqV
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - add modpost warn exported symbols marked as 'static' because 'static'
   and EXPORT_SYMBOL is an odd combination

 - break the build early if gold linker is used

 - optimize the Bison rule to produce .c and .h files by a single
   pattern rule

 - handle PREEMPT_RT in the module vermagic and UTS_VERSION

 - warn CONFIG options leaked to the user-space except existing ones

 - make single targets work properly

 - rebuild modules when module linker scripts are updated

 - split the module final link stage into scripts/Makefile.modfinal

 - fix the missed error code in merge_config.sh

 - improve the error message displayed on the attempt of the O= build in
   unclean source tree

 - remove 'clean-dirs' syntax

 - disable -Wimplicit-fallthrough warning for Clang

 - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC

 - remove ARCH_{CPP,A,C}FLAGS variables

 - add $(BASH) to run bash scripts

 - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
   instead of the basename

 - stop suppressing Clang's -Wunused-function warnings when W=1

 - fix linux/export.h to avoid genksyms calculating CRC of trimmed
   exported symbols

 - misc cleanups

* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
  genksyms: convert to SPDX License Identifier for lex.l and parse.y
  modpost: use __section in the output to *.mod.c
  modpost: use MODULE_INFO() for __module_depends
  export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
  export.h: remove defined(__KERNEL__), which is no longer needed
  kbuild: allow Clang to find unused static inline functions for W=1 build
  kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
  kbuild: refactor scripts/Makefile.extrawarn
  merge_config.sh: ignore unwanted grep errors
  kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
  modpost: add NOFAIL to strndup
  modpost: add guid_t type definition
  kbuild: add $(BASH) to run scripts with bash-extension
  kbuild: remove ARCH_{CPP,A,C}FLAGS
  kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
  kbuild: Do not enable -Wimplicit-fallthrough for clang for now
  kbuild: clean up subdir-ymn calculation in Makefile.clean
  kbuild: remove unneeded '+' marker from cmd_clean
  kbuild: remove clean-dirs syntax
  kbuild: check clean srctree even earlier
  ...
2019-09-20 08:36:47 -07:00
Mao Han
98a93b0b56 riscv: Add support for perf registers sampling
This patch implements the perf registers sampling and validation API
for the riscv arch. The valid registers and their register ID are
defined in perf_regs.h. Perf tool can backtrace in userspace with
unwind library and the registers/user stack dump support.

Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
[paul.walmsley@sifive.com: minor patch description fix]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-05 00:48:58 -07:00
Logan Gunthorpe
d95f1a542c RISC-V: Implement sparsemem
Implement sparsemem support for Risc-v which helps pave the
way for memory hotplug and eventually P2P support.

Introduce Kconfig options for virtual and physical address bits which
are used to calculate the size of the vmemmap and set the
MAX_PHYSMEM_BITS.

The vmemmap is located directly before the VMALLOC region and sized
such that we can allocate enough pages to populate all the virtual
address space in the system (similar to the way it's done in arm64).

During initialization, call memblocks_present() and sparse_init(),
and provide a stub for vmemmap_populate() (all of which is similar to
arm64).

[greentime.hu@sifive.com: fixed pfn_valid, FIXADDR_TOP and fixed a bug
 rebasing onto v5.3]
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Waterman <andrew@sifive.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Michael Clark <michaeljclark@mac.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Zong Li <zong@andestech.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
[paul.walmsley@sifive.com: updated to apply; minor commit message
 reformat]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-30 11:10:37 -07:00
Masahiro Yamada
2ff2b7ec65 kbuild: add CONFIG_ASM_MODVERSIONS
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.

scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-08-22 01:14:11 +09:00
Atish Patra
03f11f03db RISC-V: Parse cpu topology during boot.
Currently, there are no topology defined for RISC-V.
Parse the cpu-map node from device tree and setup the
cpu topology.

CPU topology after applying the patch.
$cat /sys/devices/system/cpu/cpu2/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/physical_package_id
0
$cat /sys/devices/system/cpu/cpu3/topology/core_id
3

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-22 09:36:30 -07:00
Linus Torvalds
0570bc8b7c RISC-V updates for v5.3
- Hugepage support
 
 - "Image" header support for RISC-V kernel binaries, compatible with
   the current ARM64 "Image" header
 
 - Initial page table setup now split into two stages
 
 - CONFIG_SOC support (starting with SiFive SoCs)
 
 - Avoid reserving memory between RAM start and the kernel in setup_bootmem()
 
 - Enable high-res timers and dynamic tick in the RV64 defconfig
 
 - Remove long-deprecated gate area stubs
 
 - MAINTAINERS updates to switch to the newly-created shared RISC-V git
   tree, and to fix a get_maintainers.pl issue for patches involving
   SiFive E-mail addresses
 
 Also, one integration fix to resolve a build problem introduced during
 in the v5.3-rc1 merge window:
 
 - Fix build break after macro-to-function conversion in
   asm-generic/cacheflush.h
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAl0wwmkACgkQx4+xDQu9
 KkvM0A//W641P2vQm/GBkPiqecAoYhRdGGXO7En3UiOSMe6qoDvhX9p09OtgGWa9
 0XyEdj0RQK4UuE07EnHsaIAynYdbv/er1cskkdGRhs28FdJTP2z3OrfnjcRBPQtP
 mP1d4fwm+n0DTx+BzxihNu+CRSClqVSl58ruaGiN6ZttEuJsVyjM32OPQfQapxxW
 TWl1oHugXmWLg0QIB+fjNLY9om143di6pRJeBWAQRSDzjA1x+lkVxPy6pqUK3Hjb
 F/kio+0ornReAwoY8n9WXPijUQ/bK6uY5gj2XpCpbEVbfaWjlh/a9hN8OveDLzFP
 F2l9bdKaR9/w0B7tplE7MllVI91S3gJ/UscZJQNmVStjY9iI4gphT5Hji6eR5RH4
 j15piAR9fY91iXH9XfJYIs69J1oYsaeDBUji8Sy7IdHwQwjdUjncVSF7IUakA6UJ
 okE1mq14ErZK+E2nl9OJvE89pep0R9GZDQ1kCFKQSw979CfnINDmfr5TsuiRdTU4
 mdeYmSu+l6szknLRL/bzMATAAmx6KXAO409scs8KD/xNxOylWkeZ+P47MYpEsV56
 G6d3GVZO5r+YafZYjF4aDHATI1Sh/aFPUHRrdqWSAlLJfAIMImV9Vf2UJhotzcTR
 XDWLZLqFqXB/Vl1xgkmtDAKdEEfu3iL9M9J6szYZdtI9fSiRWl4=
 =SVSp
 -----END PGP SIGNATURE-----

Merge tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Paul Walmsley:

 - Hugepage support

 - "Image" header support for RISC-V kernel binaries, compatible with
   the current ARM64 "Image" header

 - Initial page table setup now split into two stages

 - CONFIG_SOC support (starting with SiFive SoCs)

 - Avoid reserving memory between RAM start and the kernel in
   setup_bootmem()

 - Enable high-res timers and dynamic tick in the RV64 defconfig

 - Remove long-deprecated gate area stubs

 - MAINTAINERS updates to switch to the newly-created shared RISC-V git
   tree, and to fix a get_maintainers.pl issue for patches involving
   SiFive E-mail addresses

Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:

 - Fix build break after macro-to-function conversion in
   asm-generic/cacheflush.h

* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix build break after macro-to-function conversion in generic cacheflush.h
  RISC-V: Add an Image header that boot loader can parse.
  RISC-V: Setup initial page tables in two stages
  riscv: remove free_initrd_mem
  riscv: ccache: Remove unused variable
  riscv: Introduce huge page support for 32/64bit kernel
  x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
  RISC-V: Fix memory reservation in setup_bootmem()
  riscv: defconfig: enable SOC_SIFIVE
  riscv: select SiFive platform drivers with SOC_SIFIVE
  arch: riscv: add config option for building SiFive's SoC resource
  riscv: Remove gate area stubs
  MAINTAINERS: change the arch/riscv git tree to the new shared tree
  MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
  RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
2019-07-18 12:26:59 -07:00