When the inode given to did_overwrite_ref() matches the current progress
and has a reference that collides with the reference of other inode that
has the same number as the current progress, we were always telling our
caller that the inode's reference was overwritten, which is incorrect
because the other inode might be a new inode (different generation number)
in which case we must return false from did_overwrite_ref() so that its
callers don't use an orphanized path for the inode (as it will never be
orphanized, instead it will be unlinked and the new inode created later).
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single extent of 64K.
mkdir -p $SCRATCH_MNT/foo
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K" $SCRATCH_MNT/foo/bar \
| _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/mysnap1
_run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT \
$SCRATCH_MNT/mysnap2
echo "File digest before being replaced:"
md5sum $SCRATCH_MNT/mysnap1/foo/bar | _filter_scratch
# Remove the file and then create a new one in the same location with
# the same name but with different content. This new file ends up
# getting the same inode number as the previous one, because that inode
# number was the highest inode number used by the snapshot's root and
# therefore when attempting to find the a new inode number for the new
# file, we end up reusing the same inode number. This happens because
# currently btrfs uses the highest inode number summed by 1 for the
# first inode created once a snapshot's root is loaded (done at
# fs/btrfs/inode-map.c:btrfs_find_free_objectid in the linux kernel
# tree).
# Having these two different files in the snapshots with the same inode
# number (but different generation numbers) caused the btrfs send code
# to emit an incorrect path for the file when issuing an unlink
# operation because it failed to realize they were different files.
rm -f $SCRATCH_MNT/mysnap2/foo/bar
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 96K" \
$SCRATCH_MNT/mysnap2/foo/bar | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT/mysnap2 \
$SCRATCH_MNT/mysnap2_ro
_run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap
_run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 \
$SCRATCH_MNT/mysnap2_ro -f $send_files_dir/2.snap
echo "File digest in the original filesystem after being replaced:"
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
# Now recreate the filesystem by receiving both send streams and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/1.snap
_run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/2.snap
echo "File digest in the new filesystem:"
# Must match the digest from the new file.
md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch
status=0
exit
Reported-by: Martin Raiber <martin@urbackup.org>
Fixes: 8b191a6849 ("Btrfs: incremental send, check if orphanized dir inode needs delayed rename")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When dropping a snapshot we need to account for the qgroup changes. If we drop
the snapshot in all one go then the backref code will fail to find blocks from
the snapshot we dropped since it won't be able to find the root in the fs root
cache. This can lead to us failing to find refs from other roots that pointed
at blocks in the now deleted root. To handle this we need to not remove the fs
roots from the cache until after we process the qgroup operations. Do this by
adding dropped roots to a list on the transaction, and letting the transaction
remove the roots at the same time it drops the commit roots. This will keep all
of the backref searching code in sync properly, and fixes a problem Mark was
seeing with snapshot delete and qgroups. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
The following call trace is seen when generic/095 test is executed,
WARNING: CPU: 3 PID: 2769 at /home/chandan/code/repos/linux/fs/btrfs/inode.c:8967 btrfs_destroy_inode+0x284/0x2a0()
Modules linked in:
CPU: 3 PID: 2769 Comm: umount Not tainted 4.2.0-rc5+ #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20150306_163512-brownie 04/01/2014
ffffffff81c08150 ffff8802ec9cbce8 ffffffff81984058 ffff8802ffd8feb0
0000000000000000 ffff8802ec9cbd28 ffffffff81050385 ffff8802ec9cbd38
ffff8802d12f8588 ffff8802d12f8588 ffff8802f15ab000 ffff8800bb96c0b0
Call Trace:
[<ffffffff81984058>] dump_stack+0x45/0x57
[<ffffffff81050385>] warn_slowpath_common+0x85/0xc0
[<ffffffff81050465>] warn_slowpath_null+0x15/0x20
[<ffffffff81340294>] btrfs_destroy_inode+0x284/0x2a0
[<ffffffff8117ce07>] destroy_inode+0x37/0x60
[<ffffffff8117cf39>] evict+0x109/0x170
[<ffffffff8117cfd5>] dispose_list+0x35/0x50
[<ffffffff8117dd3a>] evict_inodes+0xaa/0x100
[<ffffffff81165667>] generic_shutdown_super+0x47/0xf0
[<ffffffff81165951>] kill_anon_super+0x11/0x20
[<ffffffff81302093>] btrfs_kill_super+0x13/0x110
[<ffffffff81165c99>] deactivate_locked_super+0x39/0x70
[<ffffffff811660cf>] deactivate_super+0x5f/0x70
[<ffffffff81180e1e>] cleanup_mnt+0x3e/0x90
[<ffffffff81180ebd>] __cleanup_mnt+0xd/0x10
[<ffffffff81069c06>] task_work_run+0x96/0xb0
[<ffffffff81003a3d>] do_notify_resume+0x3d/0x50
[<ffffffff8198cbc2>] int_signal+0x12/0x17
This means that the inode had non-zero "outstanding extents" during
eviction. This occurs because, during direct I/O a task which successfully
used up its reserved data space would set BTRFS_INODE_DIO_READY bit and does
not clear the bit after finishing the DIO write. A future DIO write could
actually fail and the unused reserve space won't be freed because of the
previously set BTRFS_INODE_DIO_READY bit.
Clearing the BTRFS_INODE_DIO_READY bit in btrfs_direct_IO() caused the
following issue,
|-----------------------------------+-------------------------------------|
| Task A | Task B |
|-----------------------------------+-------------------------------------|
| Start direct i/o write on inode X.| |
| reserve space | |
| Allocate ordered extent | |
| release reserved space | |
| Set BTRFS_INODE_DIO_READY bit. | |
| | splice() |
| | Transfer data from pipe buffer to |
| | destination file. |
| | - kmap(pipe buffer page) |
| | - Start direct i/o write on |
| | inode X. |
| | - reserve space |
| | - dio_refill_pages() |
| | - sdio->blocks_available == 0 |
| | - Since a kernel address is |
| | being passed instead of a |
| | user space address, |
| | iov_iter_get_pages() returns |
| | -EFAULT. |
| | - Since BTRFS_INODE_DIO_READY is |
| | set, we don't release reserved |
| | space. |
| | - Clear BTRFS_INODE_DIO_READY bit.|
| -EIOCBQUEUED is returned. | |
|-----------------------------------+-------------------------------------|
Hence this commit introduces "struct btrfs_dio_data" to track the usage of
reserved data space. The remaining unused "reserve space" can now be freed
reliably.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.
filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi. What happens
next depends on whether there's an open file handle associated with the
inode. If there is, we write to the block device, which is unexpected
behavior. If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.
Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.
Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.
Consider the following example:
File layout
[0 - 8K] [8K - 24K]
| |
| |
points to extent X, points to extent X,
offset 4K, length of 8K offset 0, length 16K
[extent X, compressed length = 4K uncompressed length = 16K]
If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).
So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.
The following test case for fstests triggers the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
test_clone_and_read_compressed_extent()
{
local mount_opts=$1
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
# Create a test file with a single extent that is compressed (the
# data we write into it is highly compressible no matter which
# compression algorithm is used, zlib or lzo).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K" \
-c "pwrite -S 0xbb 4K 8K" \
-c "pwrite -S 0xcc 12K 4K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone our extent into an adjacent offset.
$CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
$SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Same as before but for this file we clone the extent into a lower
# file offset.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K" \
-c "pwrite -S 0xbb 12K 8K" \
-c "pwrite -S 0xcc 20K 4K" \
$SCRATCH_MNT/bar | _filter_xfs_io
$CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/bar
echo "File digests before unmounting filesystem:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
# Evicting the inode or clearing the page cache before reading
# again the file would also trigger the bug - reads were returning
# all bytes in the range corresponding to the second reference to
# the extent with a value of 0, but the correct data was persisted
# (it was a bug exclusively in the read path). The issue happened
# only if the same readpages() call targeted pages belonging to the
# first and second ranges that point to the same compressed extent.
_scratch_remount
echo "File digests after mounting filesystem again:"
# Must match the same digests we got before.
md5sum $SCRATCH_MNT/foo | _filter_scratch
md5sum $SCRATCH_MNT/bar | _filter_scratch
}
echo -e "\nTesting with zlib compression..."
test_clone_and_read_compressed_extent "-o compress=zlib"
_scratch_unmount
echo -e "\nTesting with lzo compression..."
test_clone_and_read_compressed_extent "-o compress=lzo"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
After commmit e44163e177 ("btrfs: explictly delete unused block groups
in close_ctree and ro-remount"), added in the 4.3 merge window, we have
calls to btrfs_delete_unused_bgs() while holding the cleaner_mutex.
This can cause a deadlock with a concurrent block group relocation (when
a filesystem balance or shrink operation is in progress for example)
because btrfs_delete_unused_bgs() locks delete_unused_bgs_mutex and the
relocation path locks first delete_unused_bgs_mutex and then it locks
cleaner_mutex, resulting in a classic ABBA deadlock:
CPU 0 CPU 1
lock fs_info->cleaner_mutex
__btrfs_balance() || btrfs_shrink_device()
lock fs_info->delete_unused_bgs_mutex
btrfs_relocate_chunk()
btrfs_relocate_block_group()
lock fs_info->cleaner_mutex
btrfs_delete_unused_bgs()
lock fs_info->delete_unused_bgs_mutex
Fix this by not taking the cleaner_mutex before calling
btrfs_delete_unused_bgs() because it's no longer needed after
commit 67c5e7d464 ("Btrfs: fix race between balance and unused block
group deletion"). The mutex fs_info->delete_unused_bgs_mutex, the
spinlock fs_info->unused_bgs_lock and a block group's spinlock are
enough to get correct serialization between tasks running relocation
and unused block group deletion (as well as between multiple tasks
concurrently calling btrfs_delete_unused_bgs()).
This issue was discussed (in the mailing list) during the review of
the patch titled "btrfs: explictly delete unused block groups in
close_ctree and ro-remount" and it was agreed that acquiring the
cleaner mutex had to be dropped after the patch titled
"Btrfs: fix race between balance and unused block group deletion"
got merged (both patches were submitted at about the same time, but
one landed in kernel 4.2 and the other in the 4.3 merge window).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Commit 2e6e518335 ("Btrfs: fix block group ->space_info null pointer
dereference") accidently marked a space info as full when initializing
it with a value of 0 total bytes. This introduces an ENOSPC problem when
writing file data if we mount a filesystem that has no data block groups
allocated, because the data space info is initialized with 0 total bytes,
marked as full, and it never gets its total bytes incremented by a
(positive) value to unmark it as full (because there are no data block
groups loaded when the fs is mounted).
For metadata and system spaces this issue can never happen since we always
have at least one metadata block group and one system block group (even
for an empty filesystem).
So fix this by just not initializing a space info as full, reverting the
offending part of the commit mentioned above.
The following test case for fstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
# Mount our filesystem without space caches enabled so that we do not
# get any space used from the initial data block group that mkfs creates
# (space caches used space from data block groups).
_scratch_mount "-o nospace_cache"
# Need an fs with at least 2Gb to make sure mkfs.btrfs does not create
# an fs using mixed block groups (used both for data and metadata). We
# really need to have dedicated block groups for data to reproduce the
# issue and mkfs.btrfs defaults to mixed block groups only for small
# filesystems (up to 1Gb).
_require_fs_space $SCRATCH_MNT $((2 * 1024 * 1024))
# Run balance with the purpose of deleting the unused data block group
# that mkfs created. We could also wait for the background kthread to
# automatically delete the unused block group, but we do not have a way
# to make it run and wait for it to complete, so just do a balance
# instead of some unreliable sleep
_run_btrfs_util_prog balance start -dusage=0 $SCRATCH_MNT
# Now unmount the filesystem, mount it again (either with or with space
# caches enabled, it does not matter to trigger the problem) and attempt
# to create a file with some data - this used to fail with ENOSPC
# because there were no data block groups when the filesystem was
# mounted and the data space info object was marked as full when
# initialized (because it had 0 total bytes), which prevented the file
# write path from attempting to allocate a data block group and fail
# immediately with ENOSPC.
_scratch_remount
echo "hello world" > $SCRATCH_MNT/foobar
echo "Silence is golden"
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
We need not check path before btrfs_free_path() is called because
path is checked in btrfs_free_path().
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
At initializing time, for threshold-able workqueue, it's max_active
of kernel workqueue should be 1 and grow if it hits threshold.
But due to the bad naming, there is both 'max_active' for kernel
workqueue and btrfs workqueue.
So wrong value is given at workqueue initialization.
This patch fixes it, and to avoid further misunderstanding, change the
member name of btrfs_workqueue to 'current_active' and 'limit_active'.
Also corresponding comment is added for readability.
Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
num_tolerated_disk_barrier_failures in btrfs_balance
Code for updating fs_info->num_tolerated_disk_barrier_failures in
btrfs_balance() lacks raid56 support.
Reason:
Above code was wroten in 2012-08-01, together with
btrfs_calc_num_tolerated_disk_barrier_failures()'s first version.
Then, btrfs_calc_num_tolerated_disk_barrier_failures() got updated
later to support raid56, but code in btrfs_balance() was not
updated together.
Fix:
Merge above similar code to a common function:
btrfs_get_num_tolerated_disk_barrier_failures()
and make it support both case.
It can fix this bug with a bonus of cleanup, and make these code
never in above no-sync state from now on.
Suggested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
1: Use ARRAY_SIZE(types) to replace a static-value variant:
int num_types = 4;
2: Use 'continue' on condition to reduce one level tab
if (!XXX) {
code;
...
}
->
if (XXX)
continue;
code;
...
3: Put setting 'num_tolerated_disk_barrier_failures = 2' to
(num_tolerated_disk_barrier_failures > 2) condition to make
make logic neat.
if (num_tolerated_disk_barrier_failures > 0 && XXX)
num_tolerated_disk_barrier_failures = 0;
else if (num_tolerated_disk_barrier_failures > 1) {
if (XXX)
num_tolerated_disk_barrier_failures = 1;
else if (XXX)
num_tolerated_disk_barrier_failures = 2;
->
if (num_tolerated_disk_barrier_failures > 0 && XXX)
num_tolerated_disk_barrier_failures = 0;
if (num_tolerated_disk_barrier_failures > 1 && XXX)
num_tolerated_disk_barrier_failures = ;
if (num_tolerated_disk_barrier_failures > 2 && XXX)
num_tolerated_disk_barrier_failures = 2;
4: Remove comment of:
num_mirrors - 1: if RAID1 or RAID10 is configured and more
than 2 mirrors are used.
which is not fit with code.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These variables are not used from introduced version, remove them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
bio->bi_css and bio->bi_ioc don't exist when block cgroups are not on.
This adds an ifdef around them. It's not perfect, but our
use of bi_ioc is being removed in the 4.3 merge window.
The bi_css usage really should go into bio_clone, but I want to make
sure that doesn't introduce problems for other bio_clone use cases.
Signed-off-by: Chris Mason <clm@fb.com>
If we partially clone one extent of a file into a lower offset of the
file, fsync the file, power fail and then mount the fs to trigger log
replay, we can get multiple checksum items in the csum tree that overlap
each other and result in checksum lookup failures later. Those failures
can make file data read requests assume a checksum value of 0, but they
will not return an error (-EIO for example) to userspace exactly because
the expected checksum value 0 is a special value that makes the read bio
endio callback return success and set all the bytes of the corresponding
page with the value 0x01 (at fs/btrfs/inode.c:__readpage_endio_check()).
From a userspace perspective this is equivalent to file corruption
because we are not returning what was written to the file.
Details about how this can happen, and why, are included inline in the
following reproducer test case for fstests and the comment added to
tree-log.c.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
_cleanup_flakey
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_flakey
_require_cloner
_require_metadata_journaling $SCRATCH_DEV
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our test file with a single 100K extent starting at file
# offset 800K. We fsync the file here to make the fsync log tree gets
# a single csum item that covers the whole 100K extent, which causes
# the second fsync, done after the cloning operation below, to not
# leave in the log tree two csum items covering two sub-ranges
# ([0, 20K[ and [20K, 100K[)) of our extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 800K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Now clone part of our extent into file offset 400K. This adds a file
# extent item to our inode's metadata that points to the 100K extent
# we created before, using a data offset of 20K and a data length of
# 20K, so that it refers to the sub-range [20K, 40K[ of our original
# extent.
$CLONER_PROG -s $((800 * 1024 + 20 * 1024)) -d $((400 * 1024)) \
-l $((20 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Now fsync our file to make sure the extent cloning is durably
# persisted. This fsync will not add a second csum item to the log
# tree containing the checksums for the blocks in the sub-range
# [20K, 40K[ of our extent, because there was already a csum item in
# the log tree covering the whole extent, added by the first fsync
# we did before.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
echo "File digest before power failure:"
md5sum $SCRATCH_MNT/foo | _filter_scratch
# Silently drop all writes and ummount to simulate a crash/power
# failure.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
# Allow writes again, mount to trigger log replay and validate file
# contents.
# The fsync log replay first processes the file extent item
# corresponding to the file offset 400K (the one which refers to the
# [20K, 40K[ sub-range of our 100K extent) and then processes the file
# extent item for file offset 800K. It used to happen that when
# processing the later, it erroneously left in the csum tree 2 csum
# items that overlapped each other, 1 for the sub-range [20K, 40K[ and
# 1 for the whole range of our extent. This introduced a problem where
# subsequent lookups for the checksums of blocks within the range
# [40K, 100K[ of our extent would not find anything because lookups in
# the csum tree ended up looking only at the smaller csum item, the
# one covering the subrange [20K, 40K[. This made read requests assume
# an expected checksum with a value of 0 for those blocks, which caused
# checksum verification failure when the read operations finished.
# However those checksum failure did not result in read requests
# returning an error to user space (like -EIO for e.g.) because the
# expected checksum value had the special value 0, and in that case
# btrfs set all bytes of the corresponding pages with the value 0x01
# and produce the following warning in dmesg/syslog:
#
# "BTRFS warning (device dm-0): csum failed ino 257 off 917504 csum\
# 1322675045 expected csum 0"
#
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
echo "File digest after log replay:"
# Must match the same digest he had after cloning the extent and
# before the power failure happened.
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:
CPU 0 CPU 1
transaction N starts
(...)
btrfs_commit_transaction(N)
cur_trans->state = TRANS_STATE_COMMIT_START;
(...)
cur_trans->state = TRANS_STATE_COMMIT_DOING;
(...)
cur_trans->state = TRANS_STATE_UNBLOCKED;
root->fs_info->running_transaction = NULL;
btrfs_start_transaction()
--> starts transaction N + 1
btrfs_write_and_wait_transaction(trans, root);
--> starts writing all new or COWed ebs created
at transaction N
creates some new ebs, COWs some
existing ebs but doesn't COW or
deletes eb X
btrfs_commit_transaction(N + 1)
(...)
cur_trans->state = TRANS_STATE_COMMIT_START;
(...)
wait_for_commit(root, prev_trans);
--> prev_trans == transaction N
btrfs_write_and_wait_transaction() continues
writing ebs
--> fails writing eb X, we abort transaction N
and set bit BTRFS_FS_STATE_ERROR on
fs_info->fs_state, so no new transactions
can start after setting that bit
cleanup_transaction()
btrfs_cleanup_one_transaction()
wakes up task at CPU 1
continues, doesn't abort because
cur_trans->aborted (transaction N + 1)
is zero, and no checks for bit
BTRFS_FS_STATE_ERROR in fs_info->fs_state
are made
btrfs_write_and_wait_transaction(trans, root);
--> succeeds, no errors during writeback
write_ctree_super(trans, root, 0);
--> succeeds
--> we have now a superblock that points us
to some root that uses eb X, which was
never written to disk
In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".
So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
alloc_btrfs_bio relies on GFP_NOFS allocation when committing the
transaction but this allocation context is rather weak wrt. reclaim
capabilities. The page allocator currently tries hard to not fail these
allocations if they are small (<=PAGE_ALLOC_COSTLY_ORDER) but it can
still fail if the _current_ process is the OOM killer victim. Moreover
there is an attempt to move away from the default no-fail behavior and
allow these allocation to fail more eagerly. This would lead to:
[ 37.928625] kernel BUG at fs/btrfs/extent_io.c:4045
which is clearly undesirable and the nofail behavior should be explicit
if the allocation failure cannot be tolerated.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Following arguments are not used in tree-log.c:
insert_one_name(): path, type
wait_log_commit(): trans
wait_for_writer(): trans
This patch remove them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Dan Carpenter <dan.carpenter@oracle.com> reported a smatch warning
for start_log_trans():
fs/btrfs/tree-log.c:178 start_log_trans()
warn: we tested 'root->log_root' before and it was 'false'
fs/btrfs/tree-log.c
147 if (root->log_root) {
We test "root->log_root" here.
...
Reason:
Condition of:
fs/btrfs/tree-log.c:178: if (!root->log_root) {
is not necessary after commit: 7237f1833
It caused a smatch warning, and no functionally error.
Fix:
Deleting above condition will make smatch shut up,
but a better way is to do cleanup for start_log_trans()
to remove duplicated code and make code more readable.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
This attaches accounting information to bios as we submit them so the
new blkio controllers can throttle on btrfs filesystems.
Not much is required, we're just associating bios with blkcgs during clone,
calling wbc_init_bio()/wbc_account_io() during writepages submission,
and attaching the bios to the current context during direct IO.
Finally if we are splitting bios during btrfs_map_bio, this attaches
accounting information to the split.
The end result is able to throttle nicely on single disk filesystems. A
little more work is required for multi-device filesystems.
Signed-off-by: Chris Mason <clm@fb.com>
The code using 'ordered_extent_flush_mutex' mutex has removed by below
commit.
- 8d875f95da
btrfs: disable strict file flushes for renames and truncates
But the mutex still lives in struct 'btrfs_fs_info'.
So, this patch removes the mutex from struct 'btrfs_fs_info' and its
initialization code.
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When testing the previous patch, Zhao Lei reported a similar bug when
attempting to scrub a degraded RAID 5/6 filesystem with a missing
device, leading to NULL pointer dereferences from the RAID 5/6 parity
scrubbing code.
The first cause was the same as in the previous patch: attempting to
call bio_add_page() on a missing block device. To fix this,
scrub_extent_for_parity() can just mark the sectors on the missing
device as errors instead of attempting to read from it.
Additionally, the code uses scrub_remap_extent() to map the extent of
the corresponding data stripe, but the extent wasn't already mapped. If
scrub_remap_extent() finds a missing block device, it doesn't initialize
extent_dev, so we're left with a NULL struct btrfs_device. The solution
is to use btrfs_map_block() directly.
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The original implementation of device replace on RAID 5/6 seems to have
missed support for replacing a missing device. When this is attempted,
we end up calling bio_add_page() on a bio with a NULL ->bi_bdev, which
crashes when we try to dereference it. This happens because
btrfs_map_block() has no choice but to return us the missing device
because RAID 5/6 don't have any alternate mirrors to read from, and a
missing device has a NULL bdev.
The idea implemented here is to handle the missing device case
separately, which better only happen when we're replacing a missing RAID
5/6 device. We use the new BTRFS_RBIO_REBUILD_MISSING operation to
reconstruct the data from parity, check it with
scrub_recheck_block_checksum(), and write it out with
scrub_write_block_to_dev_replace().
Reported-by: Philip <bugzilla@philip-seeger.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96141
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
The current RAID 5/6 recovery code isn't quite prepared to handle
missing devices. In particular, it expects a bio that we previously
attempted to use in the read path, meaning that it has valid pages
allocated. However, missing devices have a NULL blkdev, and we can't
call bio_add_page() on a bio with a NULL blkdev. We could do manual
manipulation of bio->bi_io_vec, but that's pretty gross. So instead, add
a separate path that allows us to manually add pages to the rbio.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit 5fbc7c59fd ("Btrfs: fix unfinished readahead thread for raid5/6
degraded mounting") fixed a problem where we would skip a missing device
when we shouldn't have because there are no other mirrors to read from
in RAID 5/6. After commit 2c8cdd6ee4 ("Btrfs, replace: write dirty
pages into the replace target device"), the fix doesn't work when we're
doing a missing device replace on RAID 5/6 because the replace device is
counted as a mirror so we're tricked into thinking we can safely skip
the missing device. The fix is to count only the real stripes and decide
based on that.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
scrub_submit() claims that it can handle a bio with a NULL block device,
but this is misleading, as calling bio_add_page() on a bio with a NULL
->bi_bdev would've already crashed. Delete this, as we're about to
properly handle a missing block device.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Clone and extent same lock their source and target inodes in opposite order.
In addition to this, the range locking in clone doesn't take ordering into
account. Fix this by having clone use the same locking helpers as
btrfs-extent-same.
In addition, I do a small cleanup of the locking helpers, removing a case
(both inodes being the same) which was poorly accounted for and never
actually used by the callers.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The file layout is
[extent 1]...[extent n][4k extent][HOLE][extent x]
extent 1~n and 4k extent can be merged during defrag, and the whole
defrag bytes is larger than our defrag thresh(256k), 4k extent as a
tail is left unmerged since we check if its next extent can be merged
(the next one is a hole, so the check will fail), the layout thus can
be
[new extent][4k extent][HOLE][extent x]
(1~n)
To fix it, beside looking at the next one, this also looks at the
previous one by checking @defrag_end, which is set to 0 when we
decide to stop merging contiguous extents, otherwise, we can merge
the previous one with our extent.
Also, this makes btrfs behave consistent with how xfs and ext4 do.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we do backref walking, we search firstly in queued delayed refs
and then the on-disk backrefs, but we parse differently for shared
references, for delayed refs we also add 'ref->root' while for on-disk
backrefs we don't, this can prevent us from merging refs indexed
by the same bytenr and cause find_parent_nodes() to throw a warning at
'WARN_ON(ref->count < 0)', for example, when we have a shared data extent
with 'ref_cnt=1' and a delayed shared data with a BTRFS_DROP_DELAYED_REF,
that happens.
For shared references, no matter if it's delayed or on-disk, ref->root is
not at all used, instead it's ref->parent that really matters, so this has
delayed refs handled as the same way as on-disk refs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a task trying to double lock a extent buffer, there are no
lockdep warning about it because this lock may be in "blocking_lock"
state, and make us hard to debug.
This patch add a WARN_ON() for above condition, it can not report
all deadlock cases(as lock between tasks), but at least helps us
some.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These wrong comment was copyed from another function(expired) from
init, this patch fixed them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When btrfs_reloc_cow_block() failed in __btrfs_cow_block(), current
code just return a err-value to caller, but leave new_created extent
buffer exist and locked.
Then subsequent code (in relocate) try to lock above eb again,
and caused deadlock without any dmesg.
(eb lock use wait_event(), so no lockdep message)
It is hard to do recover work in __btrfs_cow_block() at this error
point, but we can abort transaction to avoid deadlock and operate on
unstable state.a
It also helps developer to find wrong place quickly.
(better than a frozen fs without any dmesg before patch)
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
These arguments are not used in functions, remove them for cleanup
and make kernel stack happy.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Remove chunk_objectid argument from btrfs_relocate_chunk() because
it is not necessary, it can also cleanup some code in caller for
prepare its value.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
objectid's init-value is not used in any case, remove it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need error checking code for get_ref_objectid_v0() in
relocate_block_group(), to avoid unpredictable result, especially
for accessing uninitialized value(when function failed) after
this line.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
xfstests btrfs/070 sometimes failed.
In my test machine, its fail rate is about 30%.
In another vm(vmware), its fail rate is about 50%.
Reason:
btrfs/070 do replace and defrag with fsstress simultaneously,
after above operation, checksum error is found by scrub.
Actually, it have no relationship with defrag operation, only
replace with fsstress can trigger this bug.
New data writen to target device have possibility rewrited by
old data from source device by replace code in debug, to avoid
above problem, we can set target block group to readonly in
replace period, so new data requested by other operation will
not write to same place with replace code.
Before patch(4.1-rc3):
30% failed in 100 xfstests.
After patch:
0% failed in 300 xfstests.
It also happened in btrfs/071 as it's another scrub with IO load tests.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Use new intruduced scrub_pause_on/off() can make this code block
clean and more readable.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It can reduce current duplicated code which is similar to
scrub_blocked_if_needed() but can not call it because little
different.
It also used by my next patch which is in same case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
More than one code call set_block_group_ro() and restore rw in fail.
Old code use bool bit to save blockgroup's ro state, it can not
support parallel case(it is confirmd exist in my debug log).
This patch use ref count to store ro state, and rename
set_block_group_ro/set_block_group_rw
to
inc_block_group_ro/dec_block_group_ro.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we access extent_root in scrub_stripe() and
scrub_raid56_parity(), we need bypass unrelated tree item firstly
before using its contents to do other condition.
It is not a bug fix, only making code sequence in logic.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need not load csum of whole strip in scrub because strip is trimed
before use, it is to say, what we really need to calculate csum is
data between [extent_logical, extent_len).
This patch changed to use above segment for btrfs_lookup_csums_range()
in scrub_stripe()
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
For example, in scrub_raid56_parity(), following lines are used
to judge is all data processed:
place1: if (key.objectid > logic_end) ...
place2: if (logic_start >= logic_end) ...
...
(place2 is typo, is should be ">", it is copied from other
place, where logic_end's meaning is different, long story...)
We can fix above typo directly, but the root reason is ambiguous
meaning of logic_end in scrub raid56 parity.
In other place, XXX_end is pointed to data which is not included,
and we need to process segment of [XXX_start, XXX_end).
But for scrub raid56 parity, logic_end is pointed to lattest data
need to process, and introduced many "+ 1" and "- 1" in code as
below:
length = sparity->logic_end - sparity->logic_start + 1
logic_end - logic_start + 1
stripe_logical + increment - 1
This patch changed logic_end's meaning to make it in normal understanding
in raid56 parity functions and data struct alone with above bugfix.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When scrub_extent() failed, we need to free previois created
checksum list.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code checking cancel and pause request inside scrub stripe
operation, like:
loop() {
if (parity) {
scrub_parity_stripe();
continue;
}
check_cancel_and_pause()
scrub_normal_stripe();
}
Reason is when introduce raid56 stripe scrub, new code is inserted
simplely to front of loop.
Better to:
loop() {
check_cancel_and_pause()
if (parity)
scrub_parity_stripe();
else
scrub_normal_stripe();
}
This patch adjusted code place to realize above sequence.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When mount failed because missing device, we can see following
dmesg:
[ 1060.267743] BTRFS: too many missing devices, writeable mount is not allowed
[ 1060.273158] BTRFS: open_ctree failed
This patch add missing_device_number and tolerated_missing_device_number
to above output, to let user know what really happened, and helps
bug-report and debug.
dmesg after patch:
[ 127.050367] BTRFS: missing devices(1) exceeds the limit(0), writeable mount is not allowed
[ 127.056099] BTRFS: open_ctree failed
Changelog v1->v2:
1: Changed to more clear description, suggested-by:
Anand Jain <anand.jain@oracle.com>
Suggested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Scrub panic in following operation:
mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
mount /dev/vdh /mnt/tmp1
btrfs scrub start -B /dev/vdh
(panic)
Reason:
1: In some case, leaf created by btrfs-convert was splited into 2
strips.
2: Scrub bypassed part of above wrong leaf data, but remain data
caused panic in scrub_checksum_tree_block().
For reason 1:
we can get following information after some simple operation.
a. mkfs.ext4 /dev/vdh
btrfs-convert /dev/vdh
b. btrfs-debug-tree /dev/vdh
we can see following item in extent tree:
item 25 key (27054080 METADATA_ITEM 0) itemoff 15083 itemsize 33
Its logical address is [27054080, 27070464)
and acrossed 2 strips:
[27000832, 27066368)
[27066368, 27131904)
Will be fixed in btrfs-progs(btrfs-convert, btrfsck, ...)
For reason 2:
Scrub is trying to do a "bypass" in this case, but the result is
"panic", because current code lacks of some condition in bypass,
and let some wrong leaf data escaped.
This patch fixed above scrub code.
Before patch:
# btrfs scrub start -B /dev/vdh
(panic)
After patch:
# btrfs scrub start -B /dev/vdh
scrub done for 353cec8f-da31-4a94-aa35-be72d997b06e
...
# dmesg
...
[ 59.088697] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832
[ 59.089929] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368
#
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
