Use sparc64 version of scatterlist.h.
There are three main differences:
dma_addr_t replaces __u32
dma_address replaces dvma_address
dma_length replaces dvma_length
dma_addr_t is a u32 on sparc32.
Boot tested on sparc32.
Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following sparse warnings:
symbol 'static_irqaction' was not declared. Should it be static?
symbol 'static_irq_count' was not declared. Should it be static?
symbol 'irq_action_lock' was not declared. Should it be static?
symbol 'unexpected_irq' was not declared. Should it be static?
symbol 'handler_irq' was not declared. Should it be static?
returning void-valued expression
returning void-valued expression
returning void-valued expression
symbol 'init_IRQ' was not declared. Should it be static?
Warnings were fixed by addding proper declarations
and fixing return path of a few functions.
There remains several warnings all related to the floppy driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use sparc64 version of prom/printf.c.
The only differences for sparc32 is that prom_printf is no longer
exported for modules which should be OK.
Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
o use cpu_32.c as base
o move all sparc64 definitions to the common cpu.c
o use ifdef for the parts that differs and use cpu_32 as base
o spitfire.h required a CONFIG_SPARC64 guard to fix build on 32 bit
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is complicated a little because compat_audit.c wants to see only
the 32bit syscall numbers, but is being built in a 64bit compile.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
It writes the %pic register, keeping mind of processor bugs.
Implement reset_pic() in terms of it.
Signed-off-by: David S. Miller <davem@davemloft.net>
In these instructions we load the new thread register, switch
the register window, and setup the new frame pointer.
All of these must appear atomic, and things will explode if
we take a PIL=15 NMI interrupt in the middle of this sequence.
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't want the rtrap path to try and run softirqs or
anything like that when returning from a PIL==15 NMI.
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can profile code even in a local_irq_disable() section,
only write 14 (instead of 15) into the %pil register to disable IRQs.
This allows PIL level 15 to serve as a pseudo NMI.
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell pointed out that pcmcia can't be enabled on sparc64.
There is an empty non-prompt PCMCIA explicit entry in
arch/sparc/Kconfig but that doesn't do anything.
32-bit sparc needs a small hack to make this work, since it doesn't
use the generic IRQ layer yes. We have to provide a dummy definition
of probe_irq_mask(), since this is used by the yenta socket driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel always executes in the TSO memory model now,
so none of this stuff is necessary any more.
With helpful feedback from Nick Piggin.
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact of the matter is, all UltraSPARC-III and later chips only
implement TSO. They don't implement PSO and RMO memory models at all.
Only the Ultra-I and Ultra-II family chips implement RMO and they are
only helped marginally by using this setting when executing kernel
code.
The big plus to doing this is that we can eliminate all of the non-Sync
memory barriers in the kernel except for the ones used in the optimized
memcpy/memset code (these use block load and store operations which
have their own memory ordering rules).
Signed-off-by: David S. Miller <davem@davemloft.net>
bitops_64.h includes the generic one; pretty sure 32 should too.
(Found by using __fls in generic code and breaking sparc defconfig build:
thanks Stephen and linux-next!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The name of the device_node field differ across the platforms, so we
have to implement inlined accessors. This is needed to avoid ugly
#ifdef in the generic code.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
All architectures now use the generic compat_sys_ptrace, as should every
new architecture that needs 32bit compat (if we'll ever get another).
Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also
kill a comment about __ARCH_SYS_PTRACE that was added after
__ARCH_SYS_PTRACE was already gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds the sparc syscall hookups.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes tty compile warnings as sugested by Alan Cox:
CC drivers/char/n_tty.o
drivers/char/n_tty.c: In function normal_poll:
drivers/char/n_tty.c:1555: warning: array subscript is above array bounds
drivers/char/n_tty.c:1564: warning: array subscript is above array bounds
drivers/char/n_tty.c: In function read_chan:
drivers/char/n_tty.c:1269: warning: array subscript is above array bounds
CC drivers/char/tty_ioctl.o
drivers/char/tty_ioctl.c: In function set_termios:
drivers/char/tty_ioctl.c:533: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:537: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c: In function tty_mode_ioctl:
drivers/char/tty_ioctl.c:662: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:892: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:896: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:577: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:928: warning: array subscript is above array
bounds
drivers/char/tty_ioctl.c:934: warning: array subscript is above array
bounds
Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC warns because some tests against 32-bit values never evaluate to
true due to how TASK_SIZE is defined.
I always wanted to mimick powerpc's definition of TASK_SIZE, which
is simply TASK_SIZE_OF(current) and that also fixes the warning.
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Beregalov reports oops in __bzero() called from
copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(),
when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic
and __copy_to_user_inatomic should be avoiding, not calling, the fixups.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series introduces a cgroup subsystem that utilizes the swsusp
freezer to freeze a group of tasks. It's immediately useful for batch job
management scripts. It should also be useful in the future for
implementing container checkpoint/restart.
The freezer subsystem in the container filesystem defines a cgroup file
named freezer.state. Reading freezer.state will return the current state
of the cgroup. Writing "FROZEN" to the state file will freeze all tasks
in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.
* Examples of usage :
# mkdir /containers/freezer
# mount -t cgroup -ofreezer freezer /containers
# mkdir /containers/0
# echo $some_pid > /containers/0/tasks
to get status of the freezer subsystem :
# cat /containers/0/freezer.state
RUNNING
to freeze all tasks in the container :
# echo FROZEN > /containers/0/freezer.state
# cat /containers/0/freezer.state
FREEZING
# cat /containers/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
# echo RUNNING > /containers/0/freezer.state
# cat /containers/0/freezer.state
RUNNING
This patch:
The first step in making the refrigerator() available to all
architectures, even for those without power management.
The purpose of such a change is to be able to use the refrigerator() in a
new control group subsystem which will implement a control group freezer.
[akpm@linux-foundation.org: fix sparc]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SET_PERSONALITY macro is always called with a second argument of 0.
Remove the ibcs argument and the various tests to set the PER_SVR4
personality.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* git://git.infradead.org/users/dwmw2/random-2.6:
Fix autoloading of MacBook Pro backlight driver.
Automatic MODULE_ALIAS() for DMI match tables.
Remove asm/a.out.h files for all architectures without a.out support.
Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT
Remove redundant CONFIG_ARCH_SUPPORTS_AOUT
S390: Update comments about why we don't use <asm-generic/statfs.h>
SPARC: Use <asm-generic/statfs.h>
PowerPC: Use <asm-generic/statfs.h>
PARISC: Use <asm-generic/statfs.h>
x86_64: Use <asm-generic/statfs.h>
IA64: Use <asm-generic/statfs.h>
ARM: Use <asm-generic/statfs.h>
Make <asm-generic/statfs.h> suitable for 64-bit platforms.
Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver
[MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ
Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.
EFS: Don't set f_fsid in statfs().
This requires three changes:
1) Remove !SPARC restriction in Kconfig.
2) Move Sparc specific serial drivers before 8250, so that serial
console devices don't change names on us, even if 8250 finds
devices.
3) Since the Sparc specific serial drivers try to use the
same major/minor device namespace as 8250, some coordination
is necessary. Use the sunserial_*() layer routines to allocate
minor number space within TTY_MAJOR when CONFIG_SPARC.
This has no effect on other platforms.
Thanks to Josip Rodin for bringing up this issue and testing
plus debugging various revisions of this patch.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) set_brkpt() is referenced by nothing and hasn't been used by anyone
to my knowledge for many many years. So just delete it.
2) add extern decl for do_sparc64_fault() in asm/pgtable_64.h
Signed-off-by: David S. Miller <davem@davemloft.net>
As sparse warns, without this struct page pointer subtraction is
extremely expensive, and this is a pretty common operation in
fast paths.
With this define struct page becomes 64 bytes which makes for a
simple subtract and shift, instead of a costly divide or reciprocol
multiply.
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of shadowed local variables and global_reg_snapshot[] needs
an extern declaration in asm/ptrace_64.h.
Signed-off-by: David S. Miller <davem@davemloft.net>
It is just used as a parent to encapsulate two PBM objects.
But that layout is only really relevant and necessary for
psycho PCI controllers, which unlike all the others share
a single IOMMU instance between sibling PCI busses.
Signed-off-by: David S. Miller <davem@davemloft.net>
The spinlock code does not use NR_CPUS.
Compile tested using allyesconfig and allnoconfig.
Signed-off-by: Bjoern B. Brandenburg <bbb@cs.unc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three main things:
1) Make prober an arch initcall instead of using hard-coded invocation
from paging_init()
2) Shrink table size, the fpu ident stuff was never used.
3) Use named struct initialized in table.
Signed-off-by: David S. Miller <davem@davemloft.net>
While doing some easy cleanups on the sparc code I noticed that the
CONFIG_SUN4 code seems to be worse than the rest - there were some
"I don't know how it should work, but the current code definitely cannot
work." places.
And while I have seen people running Linux on machines like a
SPARCstation 5 a few years ago I don't recall having seen sun4
machines, even less ones running Linux.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver is now limited to just doing the basic clock board and FHC
chip initialization and registering the platform devices for the
per-board LEDs, which are driven by the new LEDS_STARFIRE driver.
The IRQ register handling is already confined purely to the device
tree code.
Signed-off-by: David S. Miller <davem@davemloft.net>
These have no dependencies on the EBUS probing layer, the clients
setup the registers and all of those details. The EBUS DMA layer
just programs and manages the DMA controller found in EBUS.
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to make this week I also had to add an include
of linux/dma-mapping.h to asm/pci_32.h because drivers/pci/pci.c
really depends upon getting this header somehow.
Signed-off-by: David S. Miller <davem@davemloft.net>
The individual SBUS IOMMU arch code now sets the IOMMU information
directly into the OF device objects.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper function that, given a bus of_device node, propagates
all iommu, stc, and host_controller values down to the child nodes.
Signed-off-by: David S. Miller <davem@davemloft.net>
No drivers or code uses this stuff any more, every driver has been
converted over to OF device probing.
Signed-off-by: David S. Miller <davem@davemloft.net>
This lets us kill this "map it in every IOMMU" crazy code, and also
some of the final references to sbus_root.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is in preparation for the subsequent asm/sbus.h removal.
Also, make these routines take a "struct device" or no
arguments, as appropriate.
Signed-off-by: David S. Miller <davem@davemloft.net>
And all the SBUS dma interfaces are deleted.
A private implementation remains inside of the 32-bit sparc port which
exists only for the sake of the implementation of dma_*().
Signed-off-by: David S. Miller <davem@davemloft.net>
These dispatch to either PCI or SBUS routines based upon
the device bus type.
This will allow us to let SBUS drivers call these routines.
Signed-off-by: David S. Miller <davem@davemloft.net>
And stick the iommu archdata pointer into the generic OF device tree
of_device struct as well.
We still have to pass the sbus_bus object down into the routines so
that the SBUS bus objects get the iommu cookies set properly. After
drivers get converted to being pure OF drivers, that can go away.
Signed-off-by: David S. Miller <davem@davemloft.net>
This thing was completely pointless.
Just find the OF device in the parent of drivers that want to program
this device, and map the DMA regs inside such drivers too.
This also moves the dummy claim_dma_lock() and release_dma_lock()
implementation to floppy_32.h, which makes it handle this issue
just like floppy_64.h does.
Signed-off-by: David S. Miller <davem@davemloft.net>
This has been marked BROKEN for a long time and it's more likely
to get rewritten from scratch than to be fixed up and made usable.
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell noticed that I committed an earlier version
of the patch that didn't have two things fixed:
1) irq_of_parse_and_map() should return "unsigned int" not "int"
and it should return zero for "no irq"
2) irq_dispose_mapping() should be an inline function, not a macro,
for type checking
With feedback and suggestions from Anton Vorontsov.
Signed-off-by: David S. Miller <davem@davemloft.net>
The way to do this varies by platform type and the exact memory
controller the cpu uses.
For Spitfire cpus we currently just use prom_getunumber() and hope
that works.
For Cheetah cpus we have a memory controller driver that can
compute this information.
Signed-off-by: David S. Miller <davem@davemloft.net>
On some platforms, the I2C controller is shared between the OS and
OBP. OBP uses this I2C controller to access the EEPROM, and thus is
programmed when the kernel calls prom_setprop().
Wrap such calls with the new of_set_property_mutex.
Relevant I2C bus drivers can grab this mutex around top-level I2C
operations to provide the proper protection.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all the direct includes of asm/of_device.h are gone, this is
safe to do.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have removed all inclusions of asm/of_platform.h, this
compatability include can be removed.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of them use 'bool' and whatnot and therefore are not
kosher for userspace, so don't export them there.
Reported by Roland McGrath.
Signed-off-by: David S. Miller <davem@davemloft.net>
Record one more level of stack frame program counter.
Particularly when lockdep and all sorts of spinlock debugging is
enabled, figuring out the caller of spin_lock() is difficult when the
cpu is stuck on the lock.
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct sparc64's implementation of FUTEX_OP_ANDN to do a
bitwise negate of the oparg parameter before applying the
AND operation. All other archs that support FUTEX_OP_ANDN
either negate oparg explicitly (frv, ia64, mips, sh, x86),
or do so indirectly by using an and-not instruction (powerpc).
Since sparc64 has and-not, I chose to use that solution.
I've not found any use of FUTEX_OP_ANDN in glibc so the
impact of this bug is probably minor. But other user-space
components may try to use it so it should still get fixed.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds TIF_NOTIFY_RESUME support for sparc64.
When set, we call tracehook_notify_resume() on the way to user mode.
Signed-off-by: Roland McGrath <roland@redhat.com>
The majority of this patch was created by the following script:
***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***
The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
