Commit Graph

1818 Commits

Author SHA1 Message Date
Peter Xu
bce617edec mm: do page fault accounting in handle_mm_fault
Patch series "mm: Page fault accounting cleanups", v5.

This is v5 of the pf accounting cleanup series.  It originates from Gerald
Schaefer's report on an issue a week ago regarding to incorrect page fault
accountings for retried page fault after commit 4064b98270 ("mm: allow
VM_FAULT_RETRY for multiple times"):

  https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/

What this series did:

  - Correct page fault accounting: we do accounting for a page fault
    (no matter whether it's from #PF handling, or gup, or anything else)
    only with the one that completed the fault.  For example, page fault
    retries should not be counted in page fault counters.  Same to the
    perf events.

  - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf
    event is used in an adhoc way across different archs.

    Case (1): for many archs it's done at the entry of a page fault
    handler, so that it will also cover e.g.  errornous faults.

    Case (2): for some other archs, it is only accounted when the page
    fault is resolved successfully.

    Case (3): there're still quite some archs that have not enabled
    this perf event.

    Since this series will touch merely all the archs, we unify this
    perf event to always follow case (1), which is the one that makes most
    sense.  And since we moved the accounting into handle_mm_fault, the
    other two MAJ/MIN perf events are well taken care of naturally.

  - Unify definition of "major faults": the definition of "major
    fault" is slightly changed when used in accounting (not
    VM_FAULT_MAJOR).  More information in patch 1.

  - Always account the page fault onto the one that triggered the page
    fault.  This does not matter much for #PF handlings, but mostly for
    gup.  More information on this in patch 25.

Patchset layout:

Patch 1:     Introduced the accounting in handle_mm_fault(), not enabled.
Patch 2-23:  Enable the new accounting for arch #PF handlers one by one.
Patch 24:    Enable the new accounting for the rest outliers (gup, iommu, etc.)
Patch 25:    Cleanup GUP task_struct pointer since it's not needed any more

This patch (of 25):

This is a preparation patch to move page fault accountings into the
general code in handle_mm_fault().  This includes both the per task
flt_maj/flt_min counters, and the major/minor page fault perf events.  To
do this, the pt_regs pointer is passed into handle_mm_fault().

PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault
handlers.

So far, all the pt_regs pointer that passed into handle_mm_fault() is
NULL, which means this patch should have no intented functional change.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com
Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:02 -07:00
Christoph Hellwig
428e2976a5 uaccess: remove segment_eq
segment_eq is only used to implement uaccess_kernel.  Just open code
uaccess_kernel in the arch uaccess headers and remove one layer of
indirection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:58 -07:00
Linus Torvalds
fc80c51fd4 Kbuild updates for v5.9
- run the checker (e.g. sparse) after the compiler
 
  - remove unneeded cc-option tests for old compiler flags
 
  - fix tar-pkg to install dtbs
 
  - introduce ccflags-remove-y and asflags-remove-y syntax
 
  - allow to trace functions in sub-directories of lib/
 
  - introduce hostprogs-always-y and userprogs-always-y syntax
 
  - various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8wJXEVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGMGEP/0jDq/WafbfPN0aU83EqEWLt/sKg
 bluzmf/6HGx3XVRnuAzsHNNqysUx77WJiDsU/jbC/zdH8Iox3Sc1diE2sELLNAfY
 iJmQ8NBPggyU74aYG3OJdpDjz8T9EX/nVaYrjyFlbuXElM+Qvo8Z4Fz6NpWqKWlA
 gU+yGxEPPdX6MLHcSPSIu1hGWx7UT4fgfx3zDFTI2qvbQgQjKtzyTjAH5Cm3o87h
 rfomvHSSoAUg+Fh1LediRh1tJlkdVO+w7c+LNwCswmdBtkZuxecj1bQGUTS8GaLl
 CCWOKYfWp0KsVf1veXNNNaX/ecbp+Y34WErFq3V9Fdq5RmVlp+FPSGMyjDMRiQ/p
 LGvzbJLPpG586MnK8of0dOj6Es6tVPuq6WH2HuvsyTGcZJDpFTTxRcK3HDkE8ig6
 ZtuM3owB/Mep8IzwY2yWQiDrc7TX5Fz8S4hzGPU1zG9cfj4VT6TBqHGAy1Eql/0l
 txj6vJpnbQSdXiIX8MIU3yH35Y7eW3JYWgspTZH5Woj1S/wAWwuG93Fuuxq6mQIJ
 q6LSkMavtOfuCjOA9vJBZewpKXRU6yo0CzWNL/5EZ6z/r/I+DGtfb/qka8oYUDjX
 9H0cecL37AQxDHRPTxCZDQF0TpYiFJ6bmnMftK9NKNuIdvsk9DF7UBa3EdUNIj38
 yKS3rI7Lw55xWuY3
 =bkNQ
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - run the checker (e.g. sparse) after the compiler

 - remove unneeded cc-option tests for old compiler flags

 - fix tar-pkg to install dtbs

 - introduce ccflags-remove-y and asflags-remove-y syntax

 - allow to trace functions in sub-directories of lib/

 - introduce hostprogs-always-y and userprogs-always-y syntax

 - various Makefile cleanups

* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
  kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
  kbuild: introduce hostprogs-always-y and userprogs-always-y
  kbuild: sort hostprogs before passing it to ifneq
  kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
  kbuild: Replace HTTP links with HTTPS ones
  kbuild: trace functions in subdirectories of lib/
  kbuild: introduce ccflags-remove-y and asflags-remove-y
  kbuild: do not export LDFLAGS_vmlinux
  kbuild: always create directories of targets
  powerpc/boot: add DTB to 'targets'
  kbuild: buildtar: add dtbs support
  kbuild: remove cc-option test of -ffreestanding
  kbuild: remove cc-option test of -fno-stack-protector
  Revert "kbuild: Create directory for target DTB"
  kbuild: run the checker after the compiler
2020-08-09 14:10:26 -07:00
Masahiro Yamada
3ec8a5b33d kbuild: do not export LDFLAGS_vmlinux
When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:

$ make -j24 ARCH=arm clean
  CLEAN   arch/arm/crypto
  CLEAN   arch/arm/kernel
  CLEAN   arch/arm/mach-at91
  CLEAN   arch/arm/mach-omap2
  CLEAN   arch/arm/vdso
  CLEAN   certs
  CLEAN   lib
  CLEAN   usr
  CLEAN   net/wireless
  CLEAN   drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
  CLEAN   arch/arm/boot/compressed
  CLEAN   drivers/scsi
  CLEAN   drivers/tty/vt
  CLEAN   arch/arm/boot
  CLEAN   vmlinux.symvers modules.builtin modules.builtin.modinfo

Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.

To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.

Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.

In fact, the root cause exists in the top Makefile:

  export LDFLAGS_vmlinux

Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.

Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.

LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.

This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.

The following Makefiles are not affected:

  arch/arm/boot/compressed/Makefile
  arch/h8300/boot/compressed/Makefile
  arch/nios2/boot/compressed/Makefile
  arch/parisc/boot/compressed/Makefile
  arch/s390/boot/compressed/Makefile
  arch/sh/boot/compressed/Makefile
  arch/sh/boot/romimage/Makefile
  arch/x86/boot/compressed/Makefile

They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.

We need to take a closer look at the impact to unicore32 and xtensa.

arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.

However, commit 70fac51fea ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd00e ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd00e.

arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit 4bedea9454 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2020-08-10 01:32:58 +09:00
Linus Torvalds
81e11336d9 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few MM hotfixes

 - kthread, tools, scripts, ntfs and ocfs2

 - some of MM

Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
  mm: vmscan: consistent update to pgrefill
  mm/vmscan.c: fix typo
  khugepaged: khugepaged_test_exit() check mmget_still_valid()
  khugepaged: retract_page_tables() remember to test exit
  khugepaged: collapse_pte_mapped_thp() protect the pmd lock
  khugepaged: collapse_pte_mapped_thp() flush the right range
  mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
  mm: thp: replace HTTP links with HTTPS ones
  mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
  mm/page_alloc.c: skip setting nodemask when we are in interrupt
  mm/page_alloc: fallbacks at most has 3 elements
  mm/page_alloc: silence a KASAN false positive
  mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
  mm/page_alloc.c: simplify pageblock bitmap access
  mm/page_alloc.c: extract the common part in pfn_to_bitidx()
  mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
  mm/shuffle: remove dynamic reconfiguration
  mm/memory_hotplug: document why shuffle_zone() is relevant
  mm/page_alloc: remove nr_free_pagecache_pages()
  mm: remove vm_total_pages
  ...
2020-08-07 11:39:33 -07:00
Mike Rapoport
f9cb654cb5 asm-generic: pgalloc: provide generic pgd_free()
Most architectures define pgd_free() as a wrapper for free_page().

Provide a generic version in asm-generic/pgalloc.h and enable its use for
most architectures.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-7-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Mike Rapoport
7278914ca1 xtensa: switch to generic version of pte allocation
xtensa clears PTEs during allocation of the page tables and pte_clear()
sets the PTE to a non-zero value.  Splitting ptes_clear() helper out of
pte_alloc_one() and pte_alloc_one_kernel() allows reuse of base generic
allocation methods (__pte_alloc_one() and __pte_alloc_one_kernel()) and
the common GFP mask for page table allocations.

The pte_free() and pte_free_kernel() implementations on xtensa are
identical to the generic ones and can be dropped.

[jcmvbkbc@gmail.com: xtensa: fix closing endif comment]
  Link: http://lkml.kernel.org/r/20200721024751.1257-1-jcmvbkbc@gmail.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Mike Rapoport
ca15ca406f mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table.  These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory.  Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

	sed -i -E '/[<"]asm\/pgalloc\.h/d' \
                $(grep -L -w -f /tmp/xx \
                        $(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Linus Torvalds
19b39c38ab Merge branch 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ptrace regset updates from Al Viro:
 "Internal regset API changes:

   - regularize copy_regset_{to,from}_user() callers

   - switch to saner calling conventions for ->get()

   - kill user_regset_copyout()

  The ->put() side of things will have to wait for the next cycle,
  unfortunately.

  The balance is about -1KLoC and replacements for ->get() instances are
  a lot saner"

* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
  regset: kill user_regset_copyout{,_zero}()
  regset(): kill ->get_size()
  regset: kill ->get()
  csky: switch to ->regset_get()
  xtensa: switch to ->regset_get()
  parisc: switch to ->regset_get()
  nds32: switch to ->regset_get()
  nios2: switch to ->regset_get()
  hexagon: switch to ->regset_get()
  h8300: switch to ->regset_get()
  openrisc: switch to ->regset_get()
  riscv: switch to ->regset_get()
  c6x: switch to ->regset_get()
  ia64: switch to ->regset_get()
  arc: switch to ->regset_get()
  arm: switch to ->regset_get()
  sh: convert to ->regset_get()
  arm64: switch to ->regset_get()
  mips: switch to ->regset_get()
  sparc: switch to ->regset_get()
  ...
2020-08-07 09:29:25 -07:00
Linus Torvalds
bbcf9cd157 Xtensa updates for v5.9:
- add syscall audit support
 - add seccomp filter support
 - clean up make rules under arch/xtensa/boot
 - fix state management for exclusive access opcodes
 - fix build with PMU enabled
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAl8q2YsTHGpjbXZia2Jj
 QGdtYWlsLmNvbQAKCRBR+cyR+D+gRPbID/9G6Ck59fsl62MGyqNeEmZV3Wro+tx7
 7OlqN7KF20MgZMpure+NY2gTG+n3DwDdmEiiJ4aBzSY0Bg/R6SGubvAn6d+cBZG8
 Wfd/bFTW390/FVaPNtveef8cJ9qlfqnGTQgTJ97LVoopnbIWm+aDHfyyb+2Td/c8
 eIbhBmKOY1mZD8prnLZoVfXt7kuRrDDumBrRUwpIG/6O5sa+Q5xCj6KxNDlYqMMq
 /gi7BEVnDKz6cjXswmJYVkoPFdpJQ6dYEdfqkp+uoEb3i66qOcqB8JKppLdhjZy0
 MayL4t7xT+0PxDRQ7eU+TONVHdZxIgu9BKDpREC+xhKLBx2q0U0i/KMWOHnRdJry
 AWJtDgiQmPzYuNEAlSDndxPmpDQptFIExJ6aKu0vWafv2XwTw5ukcksDh9bP6r8e
 XnxQasiDooAcnW+ByILXyi8a2kOUGTyaM1JMKNtevLVmp4h36I7K9F++Xr9a/R/R
 W+as2D4Tp0XX2yutDh5BvjSs5+BokGKj2CdlKpVA1CsrDeTXkjncNgyL84LXId/l
 v7hm2mjsNwrtOvr8SiMiV7I/1k+5MhYfxxNrqMsUpXvvzR2TGJZzN4dLdW/IbvY4
 mkBoVcGeaa7KODRIXYbnh9sjAx2fJDgkQHjbo9S4RB2csxXdWcgbeXKt6ijkMOwz
 YzLhnJ/Bb7UqlQ==
 =nN46
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

 - add syscall audit support

 - add seccomp filter support

 - clean up make rules under arch/xtensa/boot

 - fix state management for exclusive access opcodes

 - fix build with PMU enabled

* tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing exclusive access state management
  xtensa: fix xtensa_pmu_setup prototype
  xtensa: add boot subdirectories build artifacts to 'targets'
  xtensa: add uImage and xipImage to targets
  xtensa: move vmlinux.bin[.gz] to boot subdirectory
  xtensa: initialize_mmu.h: fix a duplicated word
  selftests/seccomp: add xtensa support
  xtensa: add seccomp support
  xtensa: expose syscall through user_pt_regs
  xtensa: add audit support
2020-08-06 10:07:40 -07:00
Linus Torvalds
4f30a60aa7 close-range-v5.9
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcpgAKCRCRxhvAZXjc
 ogPeAQDv1ncqtNroFAC4pJ4tQhH7JSjW0OltiMk/AocY/J2SdQD9GJ15luYJ0/om
 697q/Z68sndRynhdoZlMuf3oYuBlHQw=
 =3ZhE
 -----END PGP SIGNATURE-----

Merge tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull close_range() implementation from Christian Brauner:
 "This adds the close_range() syscall. It allows to efficiently close a
  range of file descriptors up to all file descriptors of a calling
  task.

  This is coordinated with the FreeBSD folks which have copied our
  version of this syscall and in the meantime have already merged it in
  April 2019:

    https://reviews.freebsd.org/D21627
    https://svnweb.freebsd.org/base?view=revision&revision=359836

  The syscall originally came up in a discussion around the new mount
  API and making new file descriptor types cloexec by default. During
  this discussion, Al suggested the close_range() syscall.

  First, it helps to close all file descriptors of an exec()ing task.
  This can be done safely via (quoting Al's example from [1] verbatim):

        /* that exec is sensitive */
        unshare(CLONE_FILES);
        /* we don't want anything past stderr here */
        close_range(3, ~0U);
        execve(....);

  The code snippet above is one way of working around the problem that
  file descriptors are not cloexec by default. This is aggravated by the
  fact that we can't just switch them over without massively regressing
  userspace. For a whole class of programs having an in-kernel method of
  closing all file descriptors is very helpful (e.g. demons, service
  managers, programming language standard libraries, container managers
  etc.).

  Second, it allows userspace to avoid implementing closing all file
  descriptors by parsing through /proc/<pid>/fd/* and calling close() on
  each file descriptor and other hacks. From looking at various
  large(ish) userspace code bases this or similar patterns are very
  common in service managers, container runtimes, and programming
  language runtimes/standard libraries such as Python or Rust.

  In addition, the syscall will also work for tasks that do not have
  procfs mounted and on kernels that do not have procfs support compiled
  in. In such situations the only way to make sure that all file
  descriptors are closed is to call close() on each file descriptor up
  to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.

  Based on Linus' suggestion close_range() also comes with a new flag
  CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
  right before exec. This would usually be expressed in the sequence:

        unshare(CLONE_FILES);
        close_range(3, ~0U);

  as pointed out by Linus it might be desirable to have this be a part
  of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
  gets especially handy when we're closing all file descriptors above a
  certain threshold.

  Test-suite as always included"

* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add CLOSE_RANGE_UNSHARE tests
  close_range: add CLOSE_RANGE_UNSHARE
  tests: add close_range() tests
  arch: wire-up close_range()
  open: add close_range()
2020-08-04 15:12:02 -07:00
Linus Torvalds
9ba27414f2 fork-v5.9
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyge/QAKCRCRxhvAZXjc
 oildAQCCWpnTeXm6hrIE3VZ36X5npFtbaEthdBVAUJM7mo0FYwEA8+Wbnubg6jCw
 mztkXCnTfU7tApUdhKtQzcpEws45/Qk=
 =REE/
 -----END PGP SIGNATURE-----

Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull fork cleanups from Christian Brauner:
 "This is cleanup series from when we reworked a chunk of the process
  creation paths in the kernel and switched to struct
  {kernel_}clone_args.

  High-level this does two main things:

   - Remove the double export of both do_fork() and _do_fork() where
     do_fork() used the incosistent legacy clone calling convention.

     Now we only export _do_fork() which is based on struct
     kernel_clone_args.

   - Remove the copy_thread_tls()/copy_thread() split making the
     architecture specific HAVE_COYP_THREAD_TLS config option obsolete.

  This switches all remaining architectures to select
  HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
  convention. The current split makes the process creation codepaths
  more convoluted than they need to be. Each architecture has their own
  copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
  has a copy_thread_tls() function.

  The split is not needed anymore nowadays, all architectures support
  CLONE_SETTLS but quite a few of them never bothered to select
  HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
  and use the old calling convention. Removing this split cleans up the
  process creation codepaths and paves the way for implementing clone3()
  on such architectures since it requires the copy_thread_tls() calling
  convention.

  After having made each architectures support copy_thread_tls() this
  series simply renames that function back to copy_thread(). It also
  switches all architectures that call do_fork() directly over to
  _do_fork() and the struct kernel_clone_args calling convention. This
  is a corollary of switching the architectures that did not yet support
  it over to copy_thread_tls() since do_fork() is conditional on not
  supporting copy_thread_tls() (Mostly because it lacks a separate
  argument for tls which is trivial to fix but there's no need for this
  function to exist.).

  The do_fork() removal is in itself already useful as it allows to to
  remove the export of both do_fork() and _do_fork() we currently have
  in favor of only _do_fork(). This has already been discussed back when
  we added clone3(). The legacy clone() calling convention is - as is
  probably well-known - somewhat odd:

    #
    # ABI hall of shame
    #
    config CLONE_BACKWARDS
    config CLONE_BACKWARDS2
    config CLONE_BACKWARDS3

  that is aggravated by the fact that some architectures such as sparc
  follow the CLONE_BACKWARDSx calling convention but don't really select
  the corresponding config option since they call do_fork() directly.

  So do_fork() enforces a somewhat arbitrary calling convention in the
  first place that doesn't really help the individual architectures that
  deviate from it. They can thus simply be switched to _do_fork()
  enforcing a single calling convention. (I really hope that any new
  architectures will __not__ try to implement their own calling
  conventions...)

  Most architectures already have made a similar switch (m68k comes to
  mind).

  Overall this removes more code than it adds even with a good portion
  of added comments. It simplifies a chunk of arch specific assembly
  either by moving the code into C or by simply rewriting the assembly.

  Architectures that have been touched in non-trivial ways have all been
  actually boot and stress tested: sparc and ia64 have been tested with
  Debian 9 images. They are the two architectures which have been
  touched the most. All non-trivial changes to architectures have seen
  acks from the relevant maintainers. nios2 with a custom built
  buildroot image. h8300 I couldn't get something bootable to test on
  but the changes have been fairly automatic and I'm sure we'll hear
  people yell if I broke something there.

  All other architectures that have been touched in trivial ways have
  been compile tested for each single patch of the series via git rebase
  -x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
  even though they have just been trivially touched (removal of the
  HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
  basically "core architectures" and since it is trivial to get your
  hands on a useable image"

* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  arch: rename copy_thread_tls() back to copy_thread()
  arch: remove HAVE_COPY_THREAD_TLS
  unicore: switch to copy_thread_tls()
  sh: switch to copy_thread_tls()
  nds32: switch to copy_thread_tls()
  microblaze: switch to copy_thread_tls()
  hexagon: switch to copy_thread_tls()
  c6x: switch to copy_thread_tls()
  alpha: switch to copy_thread_tls()
  fork: remove do_fork()
  h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  sparc: unconditionally enable HAVE_COPY_THREAD_TLS
  sparc: share process creation helpers between sparc and sparc64
  sparc64: enable HAVE_COPY_THREAD_TLS
  fork: fold legacy_clone_args_valid() into _do_fork()
2020-08-04 14:47:45 -07:00
Linus Torvalds
9ba19ccd2d These were the main changes in this cycle:
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
 
  - KCSAN updates: the most important change is that GCC 11 now has all fixes in place
                   to support KCSAN, so GCC support can be enabled again. Also more annotations.
 
  - futex updates: minor cleanups and simplifications
 
  - seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
 
  - lockdep updates:
     - simplify IRQ trace event handling
     - add various new debug checks
     - simplify header dependencies, split out <linux/lockdep_types.h>, decouple
       lockdep from other low level headers some more
     - fix NMI handling
 
  - misc cleanups and smaller fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8n9/wRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hZFQ//dD+AKw9Nym+WbylovmeD0qxWxPyeN/jG
 vBVDTOJIJLtZTkZf6YHcYOJlPwaMDYUQluqTPQhsaQZy/NoEb5NM2cFAj2R9gjyT
 O8665T1dvhW9Sh353mBpuwviqdrnvCeHTBEcglSlFY7hxToYAflUN0+DXGVtNys8
 PFNf3L9SHT0GLVC8+di/eJzQaRqxiB0Pq7kvh2RvPJM/dcQNA9Ho3CCNO5j6qGoY
 u7OnMT8xJXkgbdjjUO4RO0v9VjMuNthZ2JiONDgvgKtJfIL2wt5YXIv1EYX0GuWp
 WZgIzE4o1G7GJOOzKpFfZFyK8grHu2fWgK1plvodWjlLkBmltJZ1qyOM+wngd/m2
 TgtPo73/YFbxFUbbBpkb0eiIaH2t99kMvfCWd05+GiPCtzn9UL9GfFRWd42vonwc
 sQWjFrHKlnuzifUfNcLmKg7R2nUtF3Dm/SydiTJ+9NtH/QA17YJKWnlE1moulNtQ
 p7H7+8UdcvSQ7F38A74v2IYNIyDsv5qcE8ar4QHdaanBBX/LCyD0UlfgsgxEReXf
 GDKkpx7LFQlI6Y2YB+dZgkCwhNBl3/OQ3v6hC95B37fA67dAIQyPIWHiHbaM+029
 gghqU4GcUcbjSnHPzl9PPL+hi9MyXrMjpb7CBXytg4NI4EE1waHR+0kX14V8ndRj
 MkWQOKPUgB0=
 =3MTT
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - LKMM updates: mostly documentation changes, but also some new litmus
   tests for atomic ops.

 - KCSAN updates: the most important change is that GCC 11 now has all
   fixes in place to support KCSAN, so GCC support can be enabled again.
   Also more annotations.

 - futex updates: minor cleanups and simplifications

 - seqlock updates: merge preparatory changes/cleanups for the
   'associated locks' facilities.

 - lockdep updates:
    - simplify IRQ trace event handling
    - add various new debug checks
    - simplify header dependencies, split out <linux/lockdep_types.h>,
      decouple lockdep from other low level headers some more
    - fix NMI handling

 - misc cleanups and smaller fixes

* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  kcsan: Improve IRQ state trace reporting
  lockdep: Refactor IRQ trace events fields into struct
  seqlock: lockdep assert non-preemptibility on seqcount_t write
  lockdep: Add preemption enabled/disabled assertion APIs
  seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
  seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
  seqlock: Reorder seqcount_t and seqlock_t API definitions
  seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
  seqlock: Properly format kernel-doc code samples
  Documentation: locking: Describe seqlock design and usage
  locking/qspinlock: Do not include atomic.h from qspinlock_types.h
  locking/atomic: Move ATOMIC_INIT into linux/types.h
  lockdep: Move list.h inclusion into lockdep.h
  locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
  futex: Remove unused or redundant includes
  futex: Consistently use fshared as boolean
  futex: Remove needless goto's
  futex: Remove put_futex_key()
  rwsem: fix commas in initialisation
  docs: locking: Replace HTTP links with HTTPS ones
  ...
2020-08-03 14:39:35 -07:00
Linus Torvalds
382625d0d4 for-5.9/block-20200802
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7YwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpt+dEAC7a0HYuX2OrkyawBnsgd1QQR/soC7surec
 yDDa7SMM8cOq3935bfzcYHV9FWJszEGIknchiGb9R3/T+vmSohbvDsM5zgwya9u/
 FHUIuTq324I6JWXKl30k4rwjiX9wQeMt+WZ5gC8KJYCWA296i2IpJwd0A45aaKuS
 x4bTjxqknE+fD4gQiMUSt+bmuOUAp81fEku3EPapCRYDPAj8f5uoY7R2arT/POwB
 b+s+AtXqzBymIqx1z0sZ/XcdZKmDuhdurGCWu7BfJFIzw5kQ2Qe3W8rUmrQ3pGut
 8a21YfilhUFiBv+B4wptfrzJuzU6Ps0BXHCnBsQjzvXwq5uFcZH495mM/4E4OJvh
 SbjL2K4iFj+O1ngFkukG/F8tdEM1zKBYy2ZEkGoWKUpyQanbAaGI6QKKJA+DCdBi
 yPEb7yRAa5KfLqMiocm1qCEO1I56HRiNHaJVMqCPOZxLmpXj19Fs71yIRplP1Trv
 GGXdWZsccjuY6OljoXWdEfnxAr5zBsO3Yf2yFT95AD+egtGsU1oOzlqAaU1mtflw
 ABo452pvh6FFpxGXqz6oK4VqY4Et7WgXOiljA4yIGoPpG/08L1Yle4eVc2EE01Jb
 +BL49xNJVeUhGFrvUjPGl9kVMeLmubPFbmgrtipW+VRg9W8+Yirw7DPP6K+gbPAR
 RzAUdZFbWw==
 =abJG
 -----END PGP SIGNATURE-----

Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Good amount of cleanups and tech debt removals in here, and as a
  result, the diffstat shows a nice net reduction in code.

   - Softirq completion cleanups (Christoph)

   - Stop using ->queuedata (Christoph)

   - Cleanup bd claiming (Christoph)

   - Use check_events, moving away from the legacy media change
     (Christoph)

   - Use inode i_blkbits consistently (Christoph)

   - Remove old unused writeback congestion bits (Christoph)

   - Cleanup/unify submission path (Christoph)

   - Use bio_uninit consistently, instead of bio_disassociate_blkg
     (Christoph)

   - sbitmap cleared bits handling (John)

   - Request merging blktrace event addition (Jan)

   - sysfs add/remove race fixes (Luis)

   - blk-mq tag fixes/optimizations (Ming)

   - Duplicate words in comments (Randy)

   - Flush deferral cleanup (Yufen)

   - IO context locking/retry fixes (John)

   - struct_size() usage (Gustavo)

   - blk-iocost fixes (Chengming)

   - blk-cgroup IO stats fixes (Boris)

   - Various little fixes"

* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
  block: blk-timeout: delete duplicated word
  block: blk-mq-sched: delete duplicated word
  block: blk-mq: delete duplicated word
  block: genhd: delete duplicated words
  block: elevator: delete duplicated word and fix typos
  block: bio: delete duplicated words
  block: bfq-iosched: fix duplicated word
  iocost_monitor: start from the oldest usage index
  iocost: Fix check condition of iocg abs_vdebt
  block: Remove callback typedefs for blk_mq_ops
  block: Use non _rcu version of list functions for tag_set_list
  blk-cgroup: show global disk stats in root cgroup io.stat
  blk-cgroup: make iostat functions visible to stat printing
  block: improve discard bio alignment in __blkdev_issue_discard()
  block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
  block: defer flush request no matter whether we have elevator
  block: make blk_timeout_init() static
  block: remove retry loop in ioc_release_fn()
  block: remove unnecessary ioc nested locking
  block: integrate bd_start_claiming into __blkdev_get
  ...
2020-08-03 11:57:03 -07:00
Max Filippov
a0fc1436f1 xtensa: add missing exclusive access state management
The result of the s32ex opcode is recorded in the ATOMCTL special
register and must be retrieved with the getex opcode. Context switch
between s32ex and getex may trash the ATOMCTL register and result in
duplicate update or missing update of the atomic variable.
Add atomctl8 field to the struct thread_info and use getex to swap
ATOMCTL bit 8 as a part of context switch.
Clear exclusive access monitor on kernel entry.

Cc: stable@vger.kernel.org
Fixes: f7c34874f0 ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-31 14:15:57 -07:00
Max Filippov
6d65d3769d xtensa: fix xtensa_pmu_setup prototype
Fix the following build error in configurations with
CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS=y:

  arch/xtensa/kernel/perf_event.c:420:29: error: passing argument 3 of
  ‘cpuhp_setup_state’ from incompatible pointer type

Cc: stable@vger.kernel.org
Fixes: 25a77b55e7 ("xtensa/perf: Convert the hotplug notifier to state machine callbacks")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-31 14:09:12 -07:00
Ingo Molnar
28cff52eae Merge branch 'linus' into locking/core, to resolve conflict
Conflicts:
	arch/arm/include/asm/percpu.h

As Stephen Rothwell noted, there's a conflict between this commit
in locking/core:

  a21ee6055c ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")

and this fresh upstream commit:

  aa54ea903a ("ARM: percpu.h: fix build error")

a21ee6055c is a simpler solution to the dependency problem and doesn't
further increase header hell - so this conflict resolution effectively
reverts aa54ea903a and uses the a21ee6055c solution.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-31 12:16:09 +02:00
Peter Zijlstra
f05d67179d Merge branch 'locking/header' 2020-07-29 16:14:21 +02:00
Herbert Xu
7ca8cf5347 locking/atomic: Move ATOMIC_INIT into linux/types.h
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
2020-07-29 16:14:18 +02:00
Masahiro Yamada
8824c1af3a xtensa: add boot subdirectories build artifacts to 'targets'
Xtensa always rebuilds the following even if nothing in the source code
has been changed. Passing V=2 shows the reason.

  AS      arch/xtensa/boot/boot-elf/bootstrap.o - due to bootstrap.o not in $(targets)
  LDS     arch/xtensa/boot/boot-elf/boot.lds - due to boot.lds not in $(targets)

They are built by if_changed(_dep). Add them to 'targets' so .*.cmd files
are included.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20200722004707.779601-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:06 -07:00
Max Filippov
7424d9fa84 xtensa: add uImage and xipImage to targets
uImage and xipImage are always rebuilt in the xtensa kernel build
process. Add them to 'targets' to avoid that.

Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:06 -07:00
Max Filippov
65898b3756 xtensa: move vmlinux.bin[.gz] to boot subdirectory
vmlinux.bin and vmlinux.bin.gz are always rebuilt in the kernel build
process. Add them to 'targets' and move them to the boot subdirectory
where their rules are. Update make rules that refer to them.

Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:06 -07:00
Randy Dunlap
10b60595dd xtensa: initialize_mmu.h: fix a duplicated word
Change "The the" to "For the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Message-Id: <20200721210044.15458-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:06 -07:00
Max Filippov
da94a40f72 xtensa: add seccomp support
Add SECCOMP to xtensa Kconfig, select HAVE_ARCH_SECCOMP_FILTER, add
TIF_SECCOMP and call secure_computing from do_syscall_trace_enter.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:06 -07:00
Max Filippov
8b7a87a03f xtensa: expose syscall through user_pt_regs
Use one of the reserved slots in struct user_pt_regs to return syscall
number in the GPR regset. Update syscall number from the GPR regset only
when it's non-zero.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:05 -07:00
Max Filippov
ef1a935c08 xtensa: add audit support
All bits needed for syscall audit are present on xtensa. Add
audit_syscall_entry and audit_syscall_exit calls and select
HAVE_ARCH_AUDITSYSCALL in Kconfig.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-28 00:57:05 -07:00
Al Viro
a6ea5b4588 xtensa: switch to ->regset_get()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-27 14:31:12 -04:00
Linus Torvalds
c953d60b11 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into master
Pull xtensa csum regression fix from Al Viro:
 "Max Filippov caught a breakage introduced in xtensa this cycle
  by the csum_and_copy_..._user() series.

  Cut'n'paste from the wrong source - the check that belongs
  in csum_and_copy_to_user() ended up both there and in
  csum_and_copy_from_user()"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xtensa: fix access check in csum_and_copy_from_user
2020-07-24 14:19:00 -07:00
Max Filippov
5fff09bc14 xtensa: fix access check in csum_and_copy_from_user
Commit d341659f47 ("xtensa: switch to providing
csum_and_copy_from_user()") introduced access check, but incorrectly
tested dst instead of src.
Fix access_ok argument in csum_and_copy_from_user.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: d341659f47 ("xtensa: switch to providing csum_and_copy_from_user()")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-21 19:08:25 -04:00
Christoph Hellwig
3d3a6a2088 xtensa/simdisk: remove the call to check_disk_change
The simdisk driver doesn't support event notifications, which means
that check_disk_change is a no-op.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 16:20:01 -06:00
Xu Wang
ee769ebbe9 xtensa: simplify xtensa_pmu_irq_handler
Use for_each_set_bit() instead of open-coding it to simplify the code.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Message-Id: <20200708062023.7986-1-vulab@iscas.ac.cn>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-08 00:18:15 -07:00
Christian Brauner
714acdbd1c
arch: rename copy_thread_tls() back to copy_thread()
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().

Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-07-04 23:41:37 +02:00
Christian Brauner
140c8180eb
arch: remove HAVE_COPY_THREAD_TLS
All architectures support copy_thread_tls() now, so remove the legacy
copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone
uses the same process creation calling convention based on
copy_thread_tls() and struct kernel_clone_args. This will make it easier to
maintain the core process creation code under kernel/, simplifies the
callpaths and makes the identical for all architectures.

Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-07-04 23:41:37 +02:00
Max Filippov
0d5ab14442 xtensa: update *pos in cpuinfo_op.next
Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-02 08:35:02 -07:00
Max Filippov
73f9941306 xtensa: fix __sync_fetch_and_{and,or}_4 declarations
Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-02 08:35:02 -07:00
Christoph Hellwig
c62b37d96b block: move ->make_request_fn to struct block_device_operations
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector.  Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does).  Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 07:27:24 -06:00
Christoph Hellwig
82bb454d07 simdisk: stop using ->queuedata
Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 07:27:23 -06:00
Christian Brauner
9b4feb630e
arch: wire-up close_range()
This wires up the close_range() syscall into all arches at once.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
2020-06-17 00:07:38 +02:00
Michel Lespinasse
3e4e28c5a8 mmap locking API: convert mmap_sem API comments
Convert comments that reference old mmap_sem APIs to reference
corresponding new mmap locking APIs instead.

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-12-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Michel Lespinasse
d8ed45c5dc mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport
974b9b2c68 mm: consolidate pte_index() and pte_offset_*() definitions
All architectures define pte_index() as

	(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)

and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().

For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.

Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.

The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.

The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().

[rppt@linux.ibm.com: v2]
  Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
  Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport
e05c7b1f2b mm: pgtable: add shortcuts for accessing kernel PMD and PTE
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address.  Make these
helpers available for all architectures.

[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
  Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Dmitry Safonov
9cb8f069de kernel: rename show_stack_loglvl() => show_stack()
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Dmitry Safonov
20da1e8bb0 xtensa: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: http://lkml.kernel.org/r/20200418201944.482088-44-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:12 -07:00
Dmitry Safonov
47fb702949 xtensa: add loglvl to show_trace()
Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to show_trace() as a preparation for introducing
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

[rppt@kernel.org: build fix]
  Link: http://lkml.kernel.org/r/20200511194534.GA1018386@kernel.org

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-43-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:12 -07:00
Christoph Hellwig
70cd3444c1 xtensa: implement flush_icache_user_range
The Xtensa implementation of flush_icache_range seems to be able to cope
with user addresses.  Just define flush_icache_user_range to
flush_icache_range.

[jcmvbkbc@gmail.com: fix flush_icache_user_range in noMMU configs]
  Link: http://lkml.kernel.org/r/20200525221556.4270-1-jcmvbkbc@gmail.com

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: http://lkml.kernel.org/r/20200515143646.3857579-23-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 11:05:58 -07:00
Ira Weiny
20b271dfe9 arch/kmap: define kmap_atomic_prot() for all arch's
To support kmap_atomic_prot(), all architectures need to support
protections passed to their kmap_atomic_high() function.  Pass protections
into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to
match.

Then define kmap_atomic_prot() as a core function which calls
kmap_atomic_high_prot() when needed.

Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with
the default kmap_prot exported by the architectures.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-11-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00