Commit Graph

1132 Commits

Author SHA1 Message Date
Linus Torvalds
4cdf8dbe2d Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal
2016-10-11 23:38:39 -07:00
Al Viro
4ad41c1e26 bonding: quit messing with IOCTL
The only remaining users are issuing SIOCGMIIPHY and SIOCGMIIREG,
neither of which deals with userland pointers.  Simply calling
->ndo_do_ioctl() is fine; no messing with set_fs() is needed.
It used to mess with SIOCETHTOOL, which would've needed set_fs(),
but that has been killed in "[NET] ethtool ops are the only way"
9 years ago...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:21 -04:00
David S. Miller
b20b378d49 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mediatek/mtk_eth_soc.c
	drivers/net/ethernet/qlogic/qed/qed_dcbx.c
	drivers/net/phy/Kconfig

All conflicts were cases of overlapping commits.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12 15:52:44 -07:00
Mahesh Bandewar
24b27fc4cd bonding: Fix bonding crash
Following few steps will crash kernel -

  (a) Create bonding master
      > modprobe bonding miimon=50
  (b) Create macvlan bridge on eth2
      > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \
	   type macvlan
  (c) Now try adding eth2 into the bond
      > echo +eth2 > /sys/class/net/bond0/bonding/slaves
      <crash>

Bonding does lots of things before checking if the device enslaved is
busy or not.

In this case when the notifier call-chain sends notifications, the
bond_netdev_event() assumes that the rx_handler /rx_handler_data is
registered while the bond_enslave() hasn't progressed far enough to
register rx_handler for the new slave.

This patch adds a rx_handler check that can be performed right at the
beginning of the enslave code to avoid getting into this situation.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-04 11:41:12 -07:00
Bhaktipriya Shridhar
f9f225ebf5 bonding: Remove deprecated create_singlethread_workqueue
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces
deprecated create_singlethread_workqueue(). This is the identity
conversion.

The workqueue "wq" queues multiple work items viz
&bond->mcast_work, &nnw->work, &bond->mii_work, &bond->arp_work,
&bond->alb_work, &bond->mii_work, &bond->ad_work, &bond->slave_arr_work
which require strict execution ordering. Hence, an ordered dedicated
workqueue has been used.

Since, it is a network driver, WQ_MEM_RECLAIM has been set to
ensure forward progress under memory pressure.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01 16:41:07 -07:00
Zhu Yanjun
0d039f337f bonding: fix the typo
The message "803.ad" should be "802.3ad".

Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09 14:57:14 -07:00
Mark Bloch
1533e77315 net/bonding: Enforce active-backup policy for IPoIB bonds
When using an IPoIB bond currently only active-backup mode is a valid
use case and this commit strengthens it.

Since commit 2ab82852a2 ("net/bonding: Enable bonding to enslave
netdevices not supporting set_mac_address()") was introduced till
4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the
fail over mac policy always applied to IPoIB bonds.

With the introduction of commit 492a7e67ff ("IB/IPoIB: Allow setting
the device address"), that doesn't hold and practically IPoIB bonds are
broken as of that. To fix it, lets go to fail over mac if the device
doesn't support the ndo OR this is IPoIB device.

As a by-product, this commit also prevents a stack corruption which
occurred when trying to copy 20 bytes (IPoIB) device address
to a sockaddr struct that has only 16 bytes of storage.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25 10:18:58 -07:00
David S. Miller
de0ba9a0d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just several instances of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24 00:53:32 -04:00
Beniamino Galvani
005db31d5f bonding: set carrier off for devices created through netlink
Commit e826eafa65 ("bonding: Call netif_carrier_off after
register_netdevice") moved netif_carrier_off() from bond_init() to
bond_create(), but the latter is called only for initial default
devices and ones created through sysfs:

 $ modprobe bonding
 $ echo +bond1 > /sys/class/net/bonding_masters
 $ ip link add bond2 type bond
 $ grep "MII Status" /proc/net/bonding/*
 /proc/net/bonding/bond0:MII Status: down
 /proc/net/bonding/bond1:MII Status: down
 /proc/net/bonding/bond2:MII Status: up

Ensure that carrier is initially off also for devices created through
netlink.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 16:17:43 -07:00
David S. Miller
30d0844bdc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mellanox/mlx5/core/en.h
	drivers/net/ethernet/mellanox/mlx5/core/en_main.c
	drivers/net/usb/r8152.c

All three conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06 10:35:22 -07:00
Aviv Heller
a30b016808 bonding: fix enslavement slave link notifications
Currently, link notifications are not sent by
bond_set_slave_link_state() upon enslavement if
the slave is enslaved when up.

This happens because slave->link default init value
is 0, which is the same as BOND_LINK_UP, resulting
in bond_set_slave_link_state() ignoring this transition.

This patch sets the default value of slave->link to
BOND_LINK_NOCHANGE, assuring it will count as a state
transition and thus trigger notification logic.

Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 11:51:55 -07:00
Jiri Pirko
18bfb924f0 net: introduce default neigh_construct/destroy ndo calls for L2 upper devices
L2 upper device needs to propagate neigh_construct/destroy calls down to
lower devices. Do this by defining default ndo functions and use them in
team, bond, bridge and vlan.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 09:06:28 -07:00
Eric Dumazet
f87fda00b6 bonding: prevent out of bound accesses
ether_addr_equal_64bits() requires some care about its arguments,
namely that 8 bytes might be read, even if last 2 byte values are not
used.

KASan detected a violation with null_mac_addr and lacpdu_mcast_addr
in bond_3ad.c

Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c :
Although the 8-byte alignment was there, KASan would detect out
of bound accesses.

Fixes: 815117adaf ("bonding: use ether_addr_equal_unaligned for bond addr compare")
Fixes: bb54e58929 ("bonding: Verify RX LACPDU has proper dest mac-addr")
Fixes: 885a136c52 ("bonding: use compare_ether_addr_64bits() in ALB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01 06:06:09 -04:00
David S. Miller
ee58b57100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 05:03:36 -04:00
Jay Vosburgh
0622cab034 bonding: fix 802.3ad aggregator reselection
Since commit 7bb11dc9f5 ("bonding: unify all places where
actor-oper key needs to be updated."), the logic in bonding to handle
selection between multiple aggregators has not functioned.

	This affects only configurations wherein the bonding slaves
connect to two discrete aggregators (e.g., two independent switches, each
with LACP enabled), thus creating two separate aggregation groups within a
single bond.

	The cause is a change in 7bb11dc9f5 to no longer set
AD_PORT_BEGIN on a port after a link state change, which would cause the
port to be reselected for attachment to an aggregator as if were newly
added to the bond.  We cannot restore the prior behavior, as it
contradicts IEEE 802.1AX 5.4.12, which requires ports that "become
inoperable" (lose carrier, setting port_enabled=false as per 802.1AX
5.4.7) to remain selected (i.e., assigned to the aggregator).  As the port
now remains selected, the aggregator selection logic is not invoked.

	A side effect of this change is that aggregators in bonding will
now contain ports that are link down.  The aggregator selection logic
does not currently handle this situation correctly, causing incorrect
aggregator selection.

	This patch makes two changes to repair the aggregator selection
logic in bonding to function as documented and within the confines of the
standard:

	First, the aggregator selection and related logic now utilizes the
number of active ports per aggregator, not the number of selected ports
(as some selected ports may be down).  The ad_select "bandwidth" and
"count" options only consider ports that are link up.

	Second, on any carrier state change of any slave, the aggregator
selection logic is explicitly called to insure the correct aggregator is
active.

Reported-by: Veli-Matti Lintu <veli-matti.lintu@opinsys.fi>
Fixes: 7bb11dc9f5 ("bonding: unify all places where actor-oper key needs to be updated.")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28 04:19:18 -04:00
Eric Dumazet
d3fff6c443 net: add netdev_lockdep_set_classes() helper
It is time to add netdev_lockdep_set_classes() helper
so that lockdep annotations per device type are easier to manage.

This removes a lot of copies and missing annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 13:28:37 -07:00
Eric Dumazet
f9eb8aea2a net_sched: transform qdisc running bit into a seqcount
Instead of using a single bit (__QDISC___STATE_RUNNING)
in sch->__state, use a seqcount.

This adds lockdep support, but more importantly it will allow us
to sample qdisc/class statistics without having to grab qdisc root lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 16:37:13 -07:00
Eric Dumazet
fe30937b65 bonding: fix bond_get_stats()
bond_get_stats() can be called from rtnetlink (with RTNL held)
or from /proc/net/dev seq handler (with RCU held)

The logic added in commit 5f0c5f73e5 ("bonding: make global bonding
stats more reliable") kind of assumed only one cpu could run there.

If multiple threads are reading /proc/net/dev, stats can be really
messed up after a while.

A second problem is that some fields are 32bit, so we need to properly
handle the wrap around problem.

Given that RTNL is not always held, we need to use
bond_for_each_slave_rcu().

Fixes: 5f0c5f73e5 ("bonding: make global bonding stats more reliable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 23:14:15 -04:00
Zhang Shengju
1098cee6e1 bonding: remove duplicate set of flag IFF_MULTICAST
Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 22:14:47 -04:00
David Decotigny
9856909c2a net: bonding: use __ethtool_get_ksettings
Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25 22:06:46 -05:00
David S. Miller
b633353115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/bcm7xxx.c
	drivers/net/phy/marvell.c
	drivers/net/vxlan.c

All three conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23 00:09:14 -05:00
Jay Vosburgh
266b495f11 bonding: don't use stale speed and duplex information
There is presently a race condition between the bonding periodic
link monitor and the updating of a slave's speed and duplex.  The former
occurs on a periodic basis, and the latter in response to a driver's
calling of netif_carrier_on.

	It is possible for the periodic monitor to run between the
driver call of netif_carrier_on and the receipt of the NETDEV_CHANGE
event that causes bonding to update the slave's speed and duplex.  This
manifests most notably as a report that a slave is up and "0 Mbps full
duplex" after enslavement, but in principle could report an incorrect
speed and duplex after any link up event if the device comes up with a
different speed or duplex.  This affects the 802.3ad aggregator
selection, as the speed and duplex are selection criteria.

	This is fixed by updating the speed and duplex in the periodic
monitor, prior to using that information.

	This was done historically in bonding, but the call to
bond_update_speed_duplex was removed in commit 876254ae27 ("bonding:
don't call update_speed_duplex() under spinlocks"), as it might sleep
under lock.  Later, the locking was changed to only hold RTNL, and so
after commit 876254ae27 ("bonding: don't call update_speed_duplex()
under spinlocks") this call is again safe.

Tested-by: "Tantilov, Emil S" <emil.s.tantilov@intel.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: dingtianhong <dingtianhong@huawei.com>
Fixes: 876254ae27 ("bonding: don't call update_speed_duplex() under spinlocks")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16 15:14:01 -05:00
Jay Vosburgh
21a75f0915 bonding: Fix ARP monitor validation
The current logic in bond_arp_rcv will accept an incoming ARP for
validation if (a) the receiving slave is either "active" (which includes
the currently active slave, or the current ARP slave) or, (b) there is a
currently active slave, and it has received an ARP since it became active.
For case (b), the receiving slave isn't the currently active slave, and is
receiving the original broadcast ARP request, not an ARP reply from the
target.

	This logic can fail if there is no currently active slave.  In
this situation, the ARP probe logic cycles through all slaves, assigning
each in turn as the "current_arp_slave" for one arp_interval, then setting
that one as "active," and sending an ARP probe from that slave.  The
current logic expects the ARP reply to arrive on the sending
current_arp_slave, however, due to switch FDB updating delays, the reply
may be directed to another slave.

	This can arise if the bonding slaves and switch are working, but
the ARP target is not responding.  When the ARP target recovers, a
condition may result wherein the ARP target host replies faster than the
switch can update its forwarding table, causing each ARP reply to be sent
to the previous current_arp_slave.  This will never pass the logic in
bond_arp_rcv, as neither of the above conditions (a) or (b) are met.

	Some experimentation on a LAN shows ARP reply round trips in the
200 usec range, but my available switches never update their FDB in less
than 4000 usec.

	This patch changes the logic in bond_arp_rcv to additionally
accept an ARP reply for validation on any slave if there is a current ARP
slave and it sent an ARP probe during the previous arp_interval.

Fixes: aeea64ac71 ("bonding: don't trust arp requests unless active slave really works")
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-13 05:54:55 -05:00
Zhang Shengju
1e2a8868e0 bonding: use return instead of goto
Replace 'goto' with 'return' to remove unnecessary check at label:
err_undo_flags.

The reason is that 'err_undo_flags' do two things for the first slave device:
1.revert bond mac address if it is set by the slave device.
2.revert bond device type if it's not ARPHRD_ETHER.

It's not necessary for the following three places, they changed neither bond
mac address nor type. It's straightforward to return directly.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11 09:57:00 -05:00
Amitoj Kaur Chawla
6d9b6f424d bonding: Return correct error code
The return value of kzalloc on failure of allocation of memory should
be -ENOMEM and not -1.

Found using Coccinelle. A simplified version of the semantic patch
used is:

//<smpl>
@@
expression *e;
@@

e = kzalloc(...);
if (e == NULL) {
...
return
- -1
+ -ENOMEM
;
}
//</smpl>

The single call site only checks that the return value is not 0,
hence no change is required at the call site.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11 09:43:25 -05:00
Nikolay Aleksandrov
7f20cd2521 bonding: 3ad: allow to set ad_actor settings while the bond is up
No need to require the bond down while changing these settings, the change
will be reflected immediately and the 3ad mode will sort itself out.
For faster convergence set port->ntt to true in order to generate new
LACPDUs immediately.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11 04:31:11 -05:00
Nikolay Aleksandrov
5ee14e6d33 bonding: 3ad: apply ad_actor settings changes immediately
Currently the bonding allows to set ad_actor_system and prio while the
bond device is down, but these are actually applied only if there aren't
any slaves yet (applied to bond device when first slave shows up, and to
slaves at 3ad bind time). After this patch changes are applied immediately
and the new values can be used/seen after the bond's upped so it's not
necessary anymore to release all and enslave again to see the changes.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09 04:45:49 -05:00
Zhang Shengju
d66bd9050b bonding: trivial: style fixes
remove some redudant brackets, use sizeof(*) instead of sizeof(struct x).

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-08 10:45:42 -05:00
Zhang Shengju
c6140a299b bonding: add slave device name for debug
netdev_dbg() will add bond device name, it will be helpful if we print
slave device name.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06 03:37:03 -05:00
Jarod Wilson
f344b0d940 bond: track sum of rx_nohandler for all slaves
Sample output with this set applied for an active-backup bond:

$ cat /sys/devices/virtual/net/bond0/lower_p7p1/statistics/rx_nohandler
16568
$ cat /sys/devices/virtual/net/bond0/lower_p5p2/statistics/rx_nohandler
16583
$ cat /sys/devices/virtual/net/bond0/statistics/rx_nohandler
33151

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06 02:59:51 -05:00
David S. Miller
9d367eddf3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/ethernet/mellanox/mlxsw/spectrum.h
	drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

The bond_main.c and mellanox switch conflicts were cases of
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 23:55:43 -05:00
Karl Heiss
03d84a5f83 bonding: Prevent IPv6 link local address on enslaved devices
Commit 1f718f0f4f ("bonding: populate neighbour's private on enslave")
undoes the fix provided by commit c2edacf80e ("bonding / ipv6: no addrconf
for slaves separately from master") by effectively setting the slave flag
after the slave has been opened.  If the slave comes up quickly enough, it
will go through the IPv6 addrconf before the slave flag has been set and
will get a link local IPv6 address.

In order to ensure that addrconf knows to ignore the slave devices on state
change, set IFF_SLAVE before dev_open() during bonding enslavement.

Fixes: 1f718f0f4f ("bonding: populate neighbour's private on enslave")
Signed-off-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 17:55:41 -05:00
Jarod Wilson
c8086f6d88 bonding: make mii_status sysfs node consistent
The spew in /proc/net/bonding/bond0 uses netif_carrier_ok() to determine
mii_status, while /sys/class/net/bond0/bonding/mii_status looks at
curr_active_slave, which doesn't actually seem to be set sometimes when
the bond actually is up. A mode 4 bond configured via ifcfg-foo files on a
Red Hat Enterprise Linux system, after boot, comes up clean and
functional, but the sysfs node shows mii_status of down, while proc shows
up. A simple enough fix here seems to be to use the same method for
determining up or down in both places, and I'd opt for the one that seems
to match reality.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 17:14:42 -05:00
Geliang Tang
8099c9edfd bonding: drop unused to_dev macro in bond_sysfs.c
to_dev is not used anymore so drop it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23 22:26:48 -05:00
Tom Herbert
a188222b6e net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the
set of features for offloading all checksums. This is a mask of the
checksum offload related features bits. It is incorrect to set both
NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for
features of a device.

This patch:
  - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where
    NETIF_F_ALL_CSUM is being used as a mask).
  - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to
    use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 16:50:08 -05:00
yzhu1
ce3ea1c705 net: bonding: remove redudant brackets
It is not necessary to use two brackets. As such, the redudant brackets
are removed.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-04 00:07:14 -05:00
Jiri Pirko
57beaca8ec bonding: set inactive flags on release
Be correct and symmetric to enslave and set inactive flags during release.
That gives LAG offload drivers - lower state change listeners - possibility
to do proper cleanup.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:27 -05:00
Jiri Pirko
f7c7eb7f7a bonding: implement lower state change propagation
Let netdev notifier listeners know about link and slave state change.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:27 -05:00
Jiri Pirko
5d397061ca bonding: allow notifications for bond_set_slave_link_state
Similar to state notifications.

We allow caller to indicate if the notification should happen now or later,
depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify
function (similar to bond_slave_state_notify) which is later on called
with rtnl mutex and goes over slaves and executes delayed notification.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:27 -05:00
Jiri Pirko
41f0b04964 bonding: fill-up LAG changeupper info struct and pass it along
Initialize netdev_lag_upper_info structure by TX type according to
current bonding mode and pass it along via netdev_master_upper_dev_link.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:26 -05:00
Jiri Pirko
29bf24afb2 net: add possibility to pass information about upper device via notifier
Sometimes the drivers and other code would find it handy to know some
internal information about upper device being changed. So allow upper-code
to pass information down to notifier listeners during linking.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Jiri Pirko
6dffb0447c net: propagate upper priv via netdev_master_upper_dev_link
Eliminate netdev_master_upper_dev_link_private and pass priv directly as
a parameter of netdev_master_upper_dev_link.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Jiri Pirko
3952af4d50 bonding: add 802.3ad support for 100G speeds
Similar to other speeds, add 100G to bonding 802.3ad code.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:24 -05:00
Jay Vosburgh
40baec2257 bonding: fix panic on non-ARPHRD_ETHER enslave failure
Since commit 7d5cd2ce529b, when bond_enslave fails on devices that
are not ARPHRD_ETHER, if needed, it resets the bonding device back to
ARPHRD_ETHER by calling ether_setup.

	Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP
if the bond device is up, leaving it in a quasi-down state without
having actually gone through dev_close.  For bonding, if any periodic
work queue items are active (miimon, arp_interval, etc), those will
remain running, as they are stopped by bond_close.  At this point, if
the bonding module is unloaded or the bond is deleted, the system will
panic when the work function is called.

	This panic is resolved by calling dev_close on the bond itself
prior to calling ether_setup.

Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 7d5cd2ce52 ("bonding: correctly handle bonding type change on enslave failure")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07 13:17:32 -05:00
Mahesh Bandewar
52bc671681 bonding: simplify / unify event handling code for 3ad mode.
Old logic of updating state-machine is not required since
ad_update_actor_keys() does it implicitly. The only loss is
the notification differentiation between speed vs. duplex
change. Now only one unified notification is printed.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 22:52:24 -05:00
Mahesh Bandewar
7bb11dc9f5 bonding: unify all places where actor-oper key needs to be updated.
actor_admin, and actor_oper key is changed at multiple locations in
the code. This patch brings all those updates into one location in
an attempt to avoid possible inconsistent updates causing LACP state
machine to go in weird state.

The unified place is ad_update_actor_key() with simple state-machine
logic -
  (a) If port is "duplex" then only it can participate in LACP
  (b) Speed change reinitializes the LACP state-machine.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 22:52:24 -05:00
Mahesh Bandewar
b25c2e7d3c bonding: Simplify __get_duplex function.
Eliminate 'else' clause by simply initializing variable

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 22:52:24 -05:00
Eric Dumazet
e87eb4051e bonding: support encapsulated ipv6 TSO
If using a sixtofour device on top of a bonding device,
skb segmentation of TCP traffic is done right before calling
bonding xmit, because bonding only enables TSO for IPv4.

This patch improves single flow performance by about 120 % on my hosts,
because segmentation is deferred right before calling slave xmit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 23:29:28 -07:00
Eric Dumazet
4b1b865e4e bonding: use l4 hash if available
If skb carries a l4 hash, no need to perform a flow dissection.

Performance is slightly better :

lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39012e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39393e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.39988e+06

After patch :

lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.43579e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.44304e+06
lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100
2.44312e+06

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 21:01:05 -07:00
Linus Torvalds
26d2177e97 Changes for 4.3
- Create drivers/staging/rdma
 - Move amso1100 driver to staging/rdma and schedule for deletion
 - Move ipath driver to staging/rdma and schedule for deletion
 - Add hfi1 driver to staging/rdma and set TODO for move to regular tree
 - Initial support for namespaces to be used on RDMA devices
 - Add RoCE GID table handling to the RDMA core caching code
 - Infrastructure to support handling of devices with differing
   read and write scatter gather capabilities
 - Various iSER updates
 - Kill off unsafe usage of global mr registrations
 - Update SRP driver
 - Misc. mlx4 driver updates
 - Support for the mr_alloc verb
 - Support for a netlink interface between kernel and user space cache
   daemon to speed path record queries and route resolution
 - Ininitial support for safe hot removal of verbs devices
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV7v8wAAoJELgmozMOVy/d2dcP/3PXnGFPgFGJODKE6VCZtTvj
 nooNXRKXjxv470UT5DiAX7SNcBxzzS7Zl/Lj+831H9iNXUyzuH31KtBOAZ3W03vZ
 yXwCB2caOStSldTRSUUvPe2aIFPnyNmSpC4i6XcJLJMCFijKmxin5pAo8qE44BQU
 yjhT+wC9P6LL5wZXsn/nFIMLjOFfu0WBFHNp3gs5j59paxlx5VeIAZk16aQZH135
 m7YCyicwrS8iyWQl2bEXRMon2vlCHlX2RHmOJ4f/P5I0quNcGF2+d8Yxa+K1VyC5
 zcb3OBezz+wZtvh16yhsDfSPqHWirljwID2VzOgRSzTJWvQjju8VkwHtkq6bYoBW
 egIxGCHcGWsD0R5iBXLYr/tB+BmjbDObSm0AsR4+JvSShkeVA1IpeoO+19162ixE
 n6CQnk2jCee8KXeIN4PoIKsjRSbIECM0JliWPLoIpuTuEhhpajftlSLgL5hf1dzp
 HrSy6fXmmoRj7wlTa7DnYIC3X+ffwckB8/t1zMAm2sKnIFUTjtQXF7upNiiyWk4L
 /T1QEzJ2bLQckQ9yY4v528SvBQwA4Dy1amIQB7SU8+2S//bYdUvhysWPkdKC4oOT
 WlqS5PFDCI31MvNbbM3rUbMAD8eBAR8ACw9ZpGI/Rffm5FEX5W3LoxA8gfEBRuqt
 30ZYFuW8evTL+YQcaV65
 =EHLg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull inifiniband/rdma updates from Doug Ledford:
 "This is a fairly sizeable set of changes.  I've put them through a
  decent amount of testing prior to sending the pull request due to
  that.

  There are still a few fixups that I know are coming, but I wanted to
  go ahead and get the big, sizable chunk into your hands sooner rather
  than waiting for those last few fixups.

  Of note is the fact that this creates what is intended to be a
  temporary area in the drivers/staging tree specifically for some
  cleanups and additions that are coming for the RDMA stack.  We
  deprecated two drivers (ipath and amso1100) and are waiting to hear
  back if we can deprecate another one (ehca).  We also put Intel's new
  hfi1 driver into this area because it needs to be refactored and a
  transfer library created out of the factored out code, and then it and
  the qib driver and the soft-roce driver should all be modified to use
  that library.

  I expect drivers/staging/rdma to be around for three or four kernel
  releases and then to go away as all of the work is completed and final
  deletions of deprecated drivers are done.

  Summary of changes for 4.3:

   - Create drivers/staging/rdma
   - Move amso1100 driver to staging/rdma and schedule for deletion
   - Move ipath driver to staging/rdma and schedule for deletion
   - Add hfi1 driver to staging/rdma and set TODO for move to regular
     tree
   - Initial support for namespaces to be used on RDMA devices
   - Add RoCE GID table handling to the RDMA core caching code
   - Infrastructure to support handling of devices with differing read
     and write scatter gather capabilities
   - Various iSER updates
   - Kill off unsafe usage of global mr registrations
   - Update SRP driver
   - Misc  mlx4 driver updates
   - Support for the mr_alloc verb
   - Support for a netlink interface between kernel and user space cache
     daemon to speed path record queries and route resolution
   - Ininitial support for safe hot removal of verbs devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
  IB/ipoib: Suppress warning for send only join failures
  IB/ipoib: Clean up send-only multicast joins
  IB/srp: Fix possible protection fault
  IB/core: Move SM class defines from ib_mad.h to ib_smi.h
  IB/core: Remove unnecessary defines from ib_mad.h
  IB/hfi1: Add PSM2 user space header to header_install
  IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
  mlx5: Fix incorrect wc pkey_index assignment for GSI messages
  IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
  IB/uverbs: reject invalid or unknown opcodes
  IB/cxgb4: Fix if statement in pick_local_ip6adddrs
  IB/sa: Fix rdma netlink message flags
  IB/ucma: HW Device hot-removal support
  IB/mlx4_ib: Disassociate support
  IB/uverbs: Enable device removal when there are active user space applications
  IB/uverbs: Explicitly pass ib_dev to uverbs commands
  IB/uverbs: Fix race between ib_uverbs_open and remove_one
  IB/uverbs: Fix reference counting usage of event files
  IB/core: Make ib_dealloc_pd return void
  IB/srp: Create an insecure all physical rkey only if needed
  ...
2015-09-09 08:33:31 -07:00