The current events reordering algorithm is based on a heuristic that
gets broken once we deal with a very fast flow of events.
Indeed the time period based flushing is not suitable anymore
in the following case, assuming we have a flush period of two
seconds.
CPU 0 | CPU 1
|
cnt1 timestamps | cnt1 timestamps
|
0 | 0
1 | 1
2 | 2
3 | 3
[...] | [...]
4 seconds later
If we spend too much time to read the buffers (case of a lot of
events to record in each buffers or when we have a lot of CPU buffers
to read), in the next pass the CPU 0 buffer could contain a slice
of several seconds of events. We'll read them all and notice we've
reached the period to flush. In the above example we flush the first
half of the CPU 0 buffer, then we read the CPU 1 buffer where we
have events that were on the flush slice and then the reordering
fails.
It's simple to reproduce with:
perf lock record perf bench sched messaging
To solve this, we use a new solution that doesn't rely on an
heuristical time slice period anymore but on a deterministic basis
based on how perf record does its job.
perf record saves the buffers through passes. A pass is a tour
on every buffers from every CPUs. This is made in order: for
each CPU we read the buffers of every counters. So the more
buffers we visit, the later will be the timstamps of their events.
When perf record finishes a pass it records a
PERF_RECORD_FINISHED_ROUND pseudo event.
We record the max timestamp t found in the pass n. Assuming these
timestamps are monotonic across cpus, we know that if a buffer
still has events with timestamps below t, they will be all available
and then read in the pass n + 1.
Hence when we start to read the pass n + 2, we can safely flush every
events with timestamps below t.
============ PASS n =================
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
1 | 2
2 | 3
- | 4 <--- max recorded
============ PASS n + 1 ==============
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
3 | 5
4 | 6
5 | 7 <---- max recorded
Flush every events below timestamp 4
============ PASS n + 2 ==============
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
6 | 8
7 | 9
- | 10
Flush every events below timestamp 7
etc...
It also works on perf.data versions that don't have
PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that
the events will be only flushed in the end of the perf.data
processing. It will then consume more memory and scale less with
large perf.data files.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
In order to provide a more rubust and deterministic reordering
algorithm, we need to know when we reach a point where we just
did a pass through over every counter buffers to read every thing
they had.
This patch introduces a new PERF_RECORD_FINISHED_ROUND pseudo event
that only consist in an event header and doesn't need to contain
anything.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
This patch improves 'perf report -h' output for the
'--call-graph' command line option by enumerating the
different output types.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1273332783-4268-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was x86 specific and imcomplete at that, improve the situation by
making it clear where the example provided applies and by adding the
URLs for the Intel and AMD manuals where this is discussed in depth.
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Reported-by: Robert Richter <robert.richter@amd.com
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_event_attr::precise to perf_event_attr::precise_ip and
widen it to 2 bits. This new field describes the required precision of
the PERF_SAMPLE_IP field:
0 - SAMPLE_IP can have arbitrary skid
1 - SAMPLE_IP must have constant skid
2 - SAMPLE_IP requested to have 0 skid
3 - SAMPLE_IP must have 0 skid
And modify the Intel PEBS code accordingly. The PEBS implementation
now supports up to precise_ip == 2, where we perform the IP fixup.
Also s/PERF_RECORD_MISC_EXACT/&_IP/ to clarify its meaning, this bit
should be set for each PERF_SAMPLE_IP field known to match the actual
instruction triggering the event.
This new scheme allows for a PEBS mode that uses the buffer for more
than a single event.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using explanation given by Ingo Molnar in the oprofile mailing list.
Suggested-by: Nick Black <dank@qemfd.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Black <dank@qemfd.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a couple of inefficiencies and redundancies related to
have_tracepoints() and its use when checking whether to write
TRACE_INFO.
First, there's no need to use get_tracepoints_path() in
have_tracepoints() - we really just want the part that checks whether
any attributes correspondo to tracepoints.
Second, we really don't care about raw_samples per se - tracepoints
are always raw_samples. In any case, the have_tracepoints() check
should be sufficient to decide whether or not to write TRACE_INFO.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1273030770.6383.6.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first was always using the ->long_name, while the later used
->short_name if verbose was not set, resulting in the dso column to be
much wider than needed most of the time.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On a large machine we spend a lot of time in perf_header__find_attr when
running perf report.
If we are parsing a file without PERF_SAMPLE_ID then for each sample we call
perf_header__find_attr and loop through all counter IDs, never finding a match.
As the machine gets larger there are more per cpu counters and we spend an
awful lot of time in there.
The patch below initialises each sample id to -1ULL and checks for this in
perf_header__find_attr. We may need to do something more intelligent eventually
(eg a hash lookup from counter id to attr) but this at least fixes the most
common usage of perf report.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Acked-by: Eric B Munson <ebmunson@us.ibm.com>
LKML-Reference: <20100504111915.GB14636@kryten>
Signed-off-by: Anton Blanchard <anton@samba.org>
--
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New commands need to have Documentation and be added to command-list.txt
so that they can appear when 'perf' is called withouth any subcommand:
[root@doppio linux-2.6-tip]# perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
buildid-cache Manage build-id cache.
buildid-list List the buildids in a perf.data file
diff Read two perf.data files and display the differential profile
inject Filter to augment the events stream with additional information
kmem Tool to trace/measure kernel memory(slab) properties
kvm Tool to trace/measure kvm guest os
list List all symbolic event types
lock Analyze lock events
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
test Runs sanity tests.
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
[root@doppio linux-2.6-tip]#
The new 'perf inject' command hadn't so it wasn't appearing on that list.
Also fix the long option, that should have no spaces in it, rename the faulty one
to be '--build-ids', instead of '--inject build-ids'.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current perf code implicitly assumes SAMPLE_RAW means tracepoints
are being used, but doesn't check for that. It happily records the
TRACE_INFO even if SAMPLE_RAW is used without tracepoints, but when the
perf data is read it won't go any further when it finds TRACE_INFO but
no tracepoints, and displays misleading errors.
This adds a check for both in perf-record, and won't record TRACE_INFO
unless both are true. This at least allows perf report -D to dump raw
events, and avoids triggering a misleading error condition in perf
trace. It doesn't actually enable the non-tracepoint raw events to be
displayed in perf trace, since perf trace currently only deals with
tracepoint events.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272865861.7932.16.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Into two functions, one that actually reads the build_id for the dso if
it wasn't already read, and another taht will inject the event if the
build_id is available.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this I was able to actually test Tom Zanussi's two previous patches
in my usual perf testing ways, i.e. without any tracepoints activated.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It doesn't really make sense to record the build ids at the end of a
live mode session - live mode samples need that information during the
trace rather than at the end.
Leave event__synthesize_build_id() in place, however; we'll still be
using that to synthesize build ids in a more timely fashion in a
future patch.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1272696080-16435-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to refactor code to be explicitely shared by the kernel and at
least the tools/ userspace programs, so, till we do that, copy the bare
minimum bitmap/bitops code needed by tools/perf.
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit e9e94e3bd8
"perf trace: Ignore "overwrite" field if present in
/events/header_page" makes perf trace launching spurious warnings
about unexpected tokens read:
Warning: Error: expected type 6 but read 4
This change tries to handle the overcommit field in the header_page
file whenever this field is present or not.
The problem is that if this field is not present, we try to find it
and give up in the middle of the line when we realize we are actually
dealing with another field, which is the "data" one. And this failure
abandons the file pointer in the middle of the "data" description
line:
field: u64 timestamp; offset:0; size:8; signed:0;
field: local_t commit; offset:8; size:8; signed:1;
field: char data; offset:16; size:4080; signed:1;
^^^
Here
What happens next is that we want to read this line to parse the data
field, but we fail because the pointer is not in the beginning of the
line.
We could probably fix that by rewinding the pointer. But in fact we
don't care much about these headers that only concern the ftrace
ring-buffer. We don't use them from perf.
Just skip this part of perf.data, but don't remove it from recording
to stay compatible with olders perf.data
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
-f, -c 1, -R are now useless for trace events recording, moreover
-M is useless and event hurts.
Remove them from the documentation examples and from record scripts.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
First an example with the first internal test:
[acme@doppio linux-2.6-tip]$ perf test
1: vmlinux symtab matches kallsyms: Ok
So it run just one test, that is "vmlinux symtab matches kallsyms", and it was
successful.
If we run it in verbose mode, we'll see details about errors and extra warnings
for non-fatal problems:
[acme@doppio linux-2.6-tip]$ perf test -v
1: vmlinux symtab matches kallsyms:
--- start ---
Looking at the vmlinux_path (5 entries long)
No build_id in vmlinux, ignoring it
No build_id in /boot/vmlinux, ignoring it
No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it
Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols
Maps only in vmlinux:
ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text
ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2
Maps in vmlinux with a different name in kallsyms:
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as:
*ffffffffff600100-ffffffffff60012f 0 [kernel].2
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8
Maps only in kallsyms:
ffffffffff600130-ffffffffff6003ff 0 [kernel].4
---- end ----
vmlinux symtab matches kallsyms: Ok
[acme@doppio linux-2.6-tip]$
In the above case we only know the name of the non contiguous kernel ranges in
the address space when reading the symbol information from the ELF symtab in
vmlinux.
The /proc/kallsyms file lack this, we only notice they are separate because
there are modules after the kernel and after that more kernel functions, so we
need to have a module rbtree backed by the module .ko path to get symtabs in
the vmlinux case.
The tool uses it to match by address to emit appropriate warning, but don't
considers this fatal.
The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left
these cases just as extra info in verbose mode.
The end of the sections also aren't in kallsyms, so we the symbols layer does
another pass and sets the end addresses as the next map start minus one, which
sometimes pads, causing harmless mismatches.
But at least the symbols match, tested it by copying /proc/kallsyms to
/tmp/kallsyms and doing changes to see if they were detected.
This first test also should serve as a first stab at documenting the
symbol library by providing a self contained example that exercises it
together with comments about what is being done.
More tests to check if actions done on a monitored app, like doing mmaps, etc,
makes the kernel generate the expected events should be added next.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Created when writing the first 'perf test' regression testing routine.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that "make -C tools/perf O=/tmp/some/path" works again.
Problem introduced in:
cd932c5 "perf: Move arch specific code into separate arch director"
Cc: Ian Munsie <imunsie@au.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now those methods don't operate on a global list of dsos, but on lists
of machines, so make this clear by renaming the functions.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions operated on members now grouped in 'struct machine', so
move those methods to this new class.
The changes made to 'perf probe' shows that using this abstraction
inserting probes on guests almost got supported for free.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't blindly assume that the size of the buffer is enough, use
snprintf.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.
There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The headers required for DWARF support are provided by the libdw-dev
package in Debian-based distros. This patch corrects the elfutils-dev
package name to libdw-dev in the Makefile error message when libdw.h is
not found.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1272292023-9869-1-git-send-email-stefanha@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --max-probes option to change the maximum limit of
findable probe points per event, since inlined function can be
expanded into thousands of probe points. Default value is 128.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195640.24664.62984.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to exit callback soon after finding too many probe points.
Don't try to continue searching because it already failed.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195632.24664.42598.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix perf probe to use symtab only if there is no debuginfo, because debuginfo
has more information than symtab.
If we can't find a function in debuginfo, we never find it in symtab.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195624.24664.46214.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso->node member is not initialized, it causes a segmentation fault when
adding to other lists.
It should be initilized in dso__new().
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: : <20100421195616.24664.89980.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
asciidoc does not allow the "===" to be longer than the line
above it.
Also fix a couple types and formatting errors.
Signed-off-by: William Cohen <wcohen@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4BD204C5.9000504@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
To ensure sample events time reordering is reliable, add a -d option
to perf trace to check that automatically.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Use the new generic sample events reordering from perf timechart,
this drops the ad hoc sample reordering it was using before.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Use the new generic sample events reordering from perf trace.
Before that, the displayed traces were ordered as they were
in the input as recorded by perf record (not time ordered).
This makes eventually perf trace displaying the events as beeing
time ordered.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Use the new generic sample events reordering from perf kmem,
this drops the need of multiplexing the buffers on record time,
improving the scalability of perf kmem.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Use the new generic sample events reordering from perf sched,
this drops the need of multiplexing the buffers on record time,
improving the scalability of perf sched.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
The sample events recorded by perf record are not time ordered
because we have one buffer per cpu for each event (even demultiplexed
per task/per cpu for task bound events). But when we read trace events
we want them to be ordered by time because many state machines are
involved.
There are currently two ways perf tools deal with that:
- use -M to multiplex every buffers (perf sched, perf kmem)
But this creates a lot of contention in SMP machines on
record time.
- use a post-processing time reordering (perf timechart, perf lock)
The reordering used by timechart is simple but doesn't scale well
with huge flow of events, in terms of performance and memory use
(unusable with perf lock for example).
Perf lock has its own samples reordering that flushes its memory
use in a regular basis and that uses a sorting based on the
previous event queued (a new event to be queued is close to the
previous one most of the time).
This patch proposes to export perf lock's samples reordering facility
to the session layer that reads the events. So if a tool wants to
get ordered sample events, it needs to set its
struct perf_event_ops::ordered_samples to true and that's it.
This prepares tracing based perf tools to get rid of the need to
use buffers multiplexing (-M) or to implement their own
reordering.
Also lower the flush period to 2 as it's sufficient already.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
The parse_single_tracepoint_event() was setting some attributes
before it validated the event was indeed a tracepoint event. This
caused problems with other initialization routines like in the
builtin-top.c module whereby sample_period is not set if not 0.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4bcf232b.698fd80a.6fbe.ffffb737@mx.google.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Previous state machine of perf lock was really broken.
This patch improves it a little.
This patch prepares the list of state machine that represents
lock sequences for each threads.
These state machines can be one of these sequences:
1) acquire -> acquired -> release
2) acquire -> contended -> acquired -> release
3) acquire (w/ try) -> release
4) acquire (w/ read) -> release
The case of 4) is a little special.
Double acquire of read lock is allowed, so the state machine
counts read lock number, and permits double acquire and release.
But, things are not so simple. Something in my model is still wrong.
I counted the number of lock instances with bad sequence,
and ratio is like this (case of tracing whoami): bad:233, total:2279
version 2:
* threads are now identified with tid, not pid
* prepared SEQ_STATE_READ_ACQUIRED for read lock.
* bunch of struct lock_seq_stat is now linked list
* debug information enhanced (this have to be removed someday)
e.g.
| === output for debug===
|
| bad:233, total:2279
| bad rate:0.000000
| histogram of events caused bad sequence
| acquire: 165
| acquired: 0
| contended: 0
| release: 68
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1271852634-9351-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[rename SEQ_STATE_UNINITED to SEQ_STATE_UNINITIALIZED]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This adds mappings from the register numbers from DWARF to the
register names used in the PowerPC Regs and Stack Access API. This
allows perf probe to be used to record variable contents on PowerPC.
This requires the functionality represented by the config symbol
HAVE_REGS_AND_STACK_ACCESS_API in order to function, although it will
compile without it. That functionality is added for PowerPC in commit
359e4284 ("powerpc: Add kprobe-based event tracer").
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The perf userspace tool included some architecture specific code to map
registers from the DWARF register number into the names used by the regs
and stack access API.
This moves the architecture specific code out into a separate
arch/x86 directory along with the infrastructure required to use it.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we run into dry run mode, we want to make
write_kprobe_trace_event to succeed on writing the event. Let's
initialize it to 0.
Fixes the following build error:
util/probe-event.c:1266: attention : «ret» may be used uninitialized in this function
util/probe-event.c:1266: note: «ret» was declared here
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1271808065-25290-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
