Convert the Innolux n116bge from using a fixed mode to specifying a
display timing with min/typ/max values.
Note that the n116bge's datasheet doesn't fit too well into DRM's way
of specifying things. Specifically the panel's datasheet just
specifies the vertical blanking period and horizontal blanking period
and doesn't break things out. For now we'll leave everything as a
fixed value but just allow adjusting the pixel clock. I've added a
comment on what the datasheet claims so someone could later expand
things to fit their needs if they wanted to test other blanking
periods.
The goal here is to be able to specify the panel timings in the device
tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These
Chromebooks have all been running in the downstream kernel with the
standard porches and sync lengths but just with a slightly slower
pixel clock because the 76.42 MHz clock is not achievable from the
fixed PLL that was available. These Chromebooks only achieve a
refresh rate of ~58 Hz. While it's probable that we could adjust the
timings to achieve 60 Hz it's probably wisest to match what's been
running on these devices all these years.
I'll note that though the upstream kernel has always tried to achieve
76.42 MHz, it has actually been running at 74.25 MHz also since the
video processor is parented off the same fixed PLL.
Changes in v4:
- display_timing for Innolux n116bge new for v4.
Changes in v5:
- Added Heiko's Tested-by
Changes in v6:
- Rebased to drm-misc next
- Added tags
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-3-dianders@chromium.org
This patch adds the ability to override the typical display timing for a
given panel. This is useful for devices which have timing constraints
that do not apply across the entire display driver (eg: to avoid
crosstalk between panel and digitizer on certain laptops). The rules are
as follows:
- panel must not specify fixed mode (since the override mode will
either be the same as the fixed mode, or we'll be unable to
check the bounds of the overried)
- panel must specify at least one display_timing range which will be
used to ensure the override mode fits within its bounds
Changes in v2:
- Parse the full display-timings node (using the native-mode) (Rob)
Changes in v3:
- No longer parse display-timings subnode, use panel-timing (Rob)
Changes in v4:
- Don't add mode from timing if override was specified (Thierry)
- Add warning if timing and fixed mode was specified (Thierry)
- Don't add fixed mode if timing was specified (Thierry)
- Refactor/rename a bit to avoid extra indentation from "if" tests
- i should be unsigned (Thierry)
- Add annoying WARN_ONs for some cases (Thierry)
- Simplify 'No display_timing found' handling (Thierry)
- Rename to panel_simple_parse_override_mode() (Thierry)
Changes in v5:
- Added Heiko's Tested-by
Changes in v6:
- Rebased to drm-misc next
- Added tags
Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
When vkms invoke drm_universal_plane_init(), it sets 0 for
possible_crtcs parameter which means that planes can't be attached to
any CRTC. It currently works due to some safeguard in the drm_crtc file;
however, it is possible to identify the problem by trying to append a
second connector. This patch fixes this issue by modifying
vkms_plane_init() to accept an index parameter which makes the code a
little bit more flexible and avoid set zero to possible_crtcs.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d67849c62a8d8ace1a0af455998b588798a4c45f.1561491964.git.rodrigosiqueiramelo@gmail.com
Only dynamic mode objects, i.e. those which are refcounted and have a free
callback, can be added while the overall drm_device is visible to
userspace. All others must be added before drm_dev_register and
removed after drm_dev_unregister.
Small issue around drivers still using the load/unload callbacks, we
need to make sure we set dev->registered so that load/unload code in
these callbacks doesn't trigger false warnings. Only a small
adjustement in drm_dev_register was needed.
Motivated by some irc discussions about object ids of dynamic objects
like blobs become invalid, and me going on a bit an audit spree.
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614061723.1173-1-daniel.vetter@ffwll.ch
The function drm_client_close is declared as static and marked as
EXPORT_SYMBOL. It's a bit confusing for an internal function to be
exported. The area of visibility for such function is its .c file
and all other modules. Other *.c files of the same module can't use it,
despite all other modules can. Relying on the fact that this is the
internal function and it's not a crucial part of the API, the patch
removes the EXPORT_SYMBOL marking of drm_client_close.
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703170150.32548-1-efremov@linux.com
This patch replaces mgag200's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
mga_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
For consistency, this patch also changes the preferred framebuffer depth.
The original code used 24 bpp by default and 32 bpp for the framebuffer. As
24 bpp is not well supported by userspace anyway, setting 32 bpp as default
makes sense.
v2:
* rely on fbdev helpers error messages
* document changes to preferred depth
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315832/
The bochs driver (and virtual hardware) requires buffer objects to
reside in video ram to display them to the screen. So it can not
display the framebuffer console because the respective buffer object
is permanently pinned in system memory.
Using a shadow buffer for the console solves this problem. The console
emulation will pin the buffer object only during updates from the shadow
buffer. Otherwise, the bochs driver can freely relocated the buffer
between system memory and video ram.
v2:
* select shadow FB via struct drm_mode_config.prefer_shadow_fbdev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315833/
This patch replaces ast's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
ast_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
v2:
* use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}()
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315835/
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
This patch changes DRM clients to not map the buffer by default. The
buffer, like any buffer object, should be mapped and unmapped when
needed.
An unmapped buffer object can be evicted to system memory and does
not consume video ram until displayed. This allows to use generic fbdev
emulation with drivers for low-memory devices, such as ast and mgag200.
This change affects the generic framebuffer console. HW-based consoles
map their console buffer once and keep it mapped. Userspace can mmap this
buffer into its address space. The shadow-buffered framebuffer console
only needs the buffer object to be mapped during updates. While not being
updated from the shadow buffer, the buffer object can remain unmapped.
Userspace will always mmap the shadow buffer.
v2:
* change DRM client to not map buffer by default
* manually map client buffer for fbdev with HW framebuffer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315830/
DRM clients, such as the fbdev emulation, have their buffer objects
mapped by default. Mapping a buffer implicitly prevents its relocation.
Hence, the buffer may permanently consume video memory while it's
allocated. This is a problem for drivers of low-memory devices, such as
ast, mgag200 or older framebuffer hardware, which will then not have
enough memory to display other content (e.g., X11).
This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal
DRM clients can use these functions to unmap and remap buffer objects
as needed.
There's no reference counting for vmap operations. Callers are expected
to either keep buffers mapped (as it is now), or call vmap and vunmap
in pairs around code that accesses the mapped memory.
v2:
* remove several duplicated NULL-pointer checks
v3:
* style and typo fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315831/
The current possible_clones setup doesn't look sensible. I'm assuming
the 0 and 1 are supposed to refer to the indexes of the hdmi and hda
encoders? So it kinda looks like we want hda+hdmi cloning, but then
dvo also claims to be cloneable with hdmi, but hdmi won't recipricate.
Benjamin tells me all encoders should be cloneable with each other,
so let's fix up the masks to indicate that.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-5-ville.syrjala@linux.intel.com
There's no point in the cast for accessing the base class. Just
take the address of the struct instead.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-4-ville.syrjala@linux.intel.com
Convert the panel-lvds binding to use DT schema. The panel-lvds schema
inherits from the panel-common.yaml schema and specific LVDS panel
bindings should inherit from this schema.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-10-robh@kernel.org
Convert the common panel bindings to DT schema consolidating scattered
definitions to a single schema file.
The 'simple-panel' binding just a collection of properties and not a
complete binding itself. All of the 'simple-panel' properties are
covered by the panel-common.txt binding with the exception of the
'no-hpd' property, so add that to the schema.
As there are lots of references to simple-panel.txt, just keep the file
with a reference to common.yaml for now until all the bindings are
converted.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-2-robh@kernel.org
Noticed while comparing register dump of how bootloader configures DSI
vs how kernel configures. It seems the bridge still works either way,
but fixing this clears the 'CHA_DATATYPE_ERR' error status bit.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-4-robdclark@gmail.com
The bridge has pretty good docs, lets add a link to make them easier to
find.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-2-robdclark@gmail.com
Fix sparse warning:
drivers/gpu/drm/bridge/sii902x.c:665:5: warning:
symbol 'sii902x_audio_digital_mute' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614153623.28708-1-yuehaibing@huawei.com
This reverts commit 220df83a53.
Turns out drm_gem_dumb_map_offset really only worked for the dumb buffer
case, so revert the name change.
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit 583bbf4613.
Turns out we need mmap to work on imported BOs even if the current code
is buggy.
Signed-off-by: Rob Herring <robh@kernel.org>
PRIME functionality is now provided by GEM object functions. The driver
callback functions are obsolete. So this patch renames them and turns
them into static internal functions of the VRAM helper library. The
implementation of gem_prime_mmap is now unused and the patch removes it.
v3:
* kept each renamed function at its original location within file
* kept documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-6-tzimmermann@suse.de
The vbox driver uses VRAM helpers for memory management. These helpers
provide a basic implementation of PRIME functions, so the vbox driver's
empty implmentation can be removed. As a side effect of this change,
vbox can now use generic framebuffer emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-5-tzimmermann@suse.de
The GEM object's free function is now called through struct
drm_gem_object_funcs.free. The function struct drm_driver.gem_prime_mmap
is now required for mmap'ing GEM objects to userspace.
v2:
* set drm_driver.gem_prime_mmap to drm_gem_prime_mmap()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-4-tzimmermann@suse.de
VRAM PRIME helpers are now called through GEM object functions. The
driver callback functions are obsolete.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-3-tzimmermann@suse.de
PRIME functionality is now provided via the callback functions in
struct drm_gem_object_funcs. The driver-structure functions are obsolete.
As a side effect of this patch, VRAM-based drivers get basic PRIME
support automatically without having to set any flags or additional
fields.
v2:
- use existing PRIME functions for object's table
v3:
- move object table to EOF so it can refer to internal interfaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702115012.4418-2-tzimmermann@suse.de
Add support for the LCD panels that must be driven with the
Sharp-specific signals SPL, CLS, REV, PS.
An example of such panel is the LS020B1DD01D supported by the
panel-simple DRM panel driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627182114.27299-2-paul@crapouillou.net
# *** extracted tags ***
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Simplify a bit the probe function by using the newly introduced
devm_platform_ioremap_resource(), instead of having to call
platform_get_resource() followed by devm_ioremap_resource().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627182114.27299-1-paul@crapouillou.net
# *** extracted tags ***
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
When using an I2S source using a different clock source (usually the I2S
audio HW uses dedicated PLLs, different from the HDMI PHY PLL), fixed
CTS values will cause some frequent audio drop-out and glitches as
reported on Amlogic, Allwinner and Rockchip SoCs setups.
Setting the CTS in automatic mode will let the HDMI controller generate
automatically the CTS value to match the input audio clock.
The DesignWare DW-HDMI User Guide explains:
For Automatic CTS generation
Write "0" on the bit field "CTS_manual", Register 0x3205: AUD_CTS3
The DesignWare DW-HDMI Databook explains :
If "CTS_manual" bit equals 0b this registers contains "audCTS[19:0]"
generated by the Cycle time counter according to specified timing.
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085147.26971-1-narmstrong@baylibre.com
To get the chip into the expected state, even when the hardware reset pin
isn't connected, do a software reset in this case. It isn't as thorough as
the hardware reset, as the I2C communication block can not be reset for
obvious reasons, but it's getting the chip into a defined state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627085958.28331-1-l.stach@pengutronix.de
In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
I have agreed with Boris Brezillon that we will share the
maintainer role for the drm/atmel_hlcdc driver.
Nicolas Ferre from Microchip has donated a few boards that
allows me to test things - thanks!
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Boris Brezillon <bbrezillon@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Peter Rosin <peda@axentia.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627211643.GA19853@ravnborg.org
Drop use of the deprecated drmP.h header file.
Replace with necessary include files to fix build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-5-sam@ravnborg.org
Drop the use of the deprecated drmP.h header file.
Clean up list of include files and sort them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-4-sam@ravnborg.org
This makes migration away from drmP.h simple
as we do not need to duplicate dependencies required by mga_drv.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-3-sam@ravnborg.org
Opencode all macros used from the deprecated drm_os_linux.h header file.
The DRM_WAIT_ON used 3 * HZ as timeout.
This was translated to 3000 msec.
The return value of mga_driver_fence_wait() was not
used, so make it return void to simplify code a bit.
v2:
- fixed timeout to 3000 msec (original value was 3 * Hz)
- drop unused return value from mga_driver_fence_wait()
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190623103542.30697-2-sam@ravnborg.org
