These files are not covered in globs from any other .gitignore files.
Signed-off-by: Jeroen Roovers <jer@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
I fixed it by making mrproper clean everything.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
Same as on x86-64, strip the .comment, .note and debug sections from the
Linux kernel before creating the compressed image for the boot loader.
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even a 32-bit kernel requires at least 27 MB to decompress itself, so
halt the system with a message if the system has less memory than 32 MB.
Signed-off-by: Helge Deller <deller@gmx.de>
This ccflags-y is never used because arch/parisc/boot/Makefile
only contains objcopy and install targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Change the parisc vmlinuz boot code to include and process the real
compressed vmlinux.gz ELF file instead of a compressed memory dump.
This brings parisc in sync on how it's done on x86_64.
The benefit of this change is that, e.g. for debugging purposes, one can
then extract the vmlinux file out of the vmlinuz which was booted which
wasn't possible before. This can be archieved with the existing
scripts/extract-vmlinux script, which just needs a small tweak to prefer
to extract a compressed file before trying the existing given binary.
The downside of this approach is that due to the extra round of
decompression/ELF processing we need more physical memory installed to
be able to boot a kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Pull printk updates from Petr Mladek:
- Add a console_msg_format command line option:
The value "default" keeps the old "[time stamp] text\n" format. The
value "syslog" allows to see the syslog-like "<log
level>[timestamp] text" format.
This feature was requested by people doing regression tests, for
example, 0day robot. They want to have both filtered and full logs
at hands.
- Reduce the risk of softlockup:
Pass the console owner in a busy loop.
This is a new approach to the old problem. It was first proposed by
Steven Rostedt on Kernel Summit 2017. It marks a context in which
the console_lock owner calls console drivers and could not sleep.
On the other side, printk() callers could detect this state and use
a busy wait instead of a simple console_trylock(). Finally, the
console_lock owner checks if there is a busy waiter at the end of
the special context and eventually passes the console_lock to the
waiter.
The hand-off works surprisingly well and helps in many situations.
Well, there is still a possibility of the softlockup, for example,
when the flood of messages stops and the last owner still has too
much to flush.
There is increasing number of people having problems with
printk-related softlockups. We might eventually need to get better
solution. Anyway, this looks like a good start and promising
direction.
- Do not allow to schedule in console_unlock() called from printk():
This reverts an older controversial commit. The reschedule helped
to avoid softlockups. But it also slowed down the console output.
This patch is obsoleted by the new console waiter logic described
above. In fact, the reschedule made the hand-off less effective.
- Deprecate "%pf" and "%pF" format specifier:
It was needed on ia64, ppc64 and parisc64 to dereference function
descriptors and show the real function address. It is done
transparently by "%ps" and "pS" format specifier now.
Sergey Senozhatsky found that all the function descriptors were in
a special elf section and could be easily detected.
- Remove printk_symbol() API:
It has been obsoleted by "%pS" format specifier, and this change
helped to remove few continuous lines and a less intuitive old API.
- Remove redundant memsets:
Sergey removed unnecessary memset when processing printk.devkmsg
command line option.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
printk: drop redundant devkmsg_log_str memsets
printk: Never set console_may_schedule in console_trylock()
printk: Hide console waiter logic into helpers
printk: Add console owner and waiter logic to load balance console writes
kallsyms: remove print_symbol() function
checkpatch: add pF/pf deprecation warning
symbol lookup: introduce dereference_symbol_descriptor()
parisc64: Add .opd based function descriptor dereference
powerpc64: Add .opd based function descriptor dereference
ia64: Add .opd based function descriptor dereference
sections: split dereference_function_descriptor()
openrisc: Fix conflicting types for _exext and _stext
lib: do not use print_symbol()
irq debug: do not use print_symbol()
sysfs: do not use print_symbol()
drivers: do not use print_symbol()
x86: do not use print_symbol()
unicore32: do not use print_symbol()
sh: do not use print_symbol()
mn10300: do not use print_symbol()
...
We are moving towards separate kernel and module function descriptor
dereference callbacks. This patch enables it for parisc64.
For pointers that belong to the kernel
- Added __start_opd and __end_opd pointers, to track the kernel
.opd section address range;
- Added dereference_kernel_function_descriptor(). Now we
will dereference only function pointers that are within
[__start_opd, __end_opd);
For pointers that belong to a module
- Added dereference_module_function_descriptor() to handle module
function descriptor dereference. Now we will dereference only
pointers that are within [module->opd.start, module->opd.end).
Link: http://lkml.kernel.org/r/20171109234830.5067-5-sergey.senozhatsky@gmail.com
To: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>
To: Helge Deller <deller@gmx.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Helge Deller <deller@gmx.de> #parisc64
Signed-off-by: Petr Mladek <pmladek@suse.com>
Static analysis tools complain that we intended to have curly braces
around this indent block. In this case this assumption is wrong, so fix
the indenting.
Fixes: 2f3c7b8137 ("parisc: Add core code for self-extracting kernel")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.14+
gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into
word-wise accesses if the 32-bit integer output_len is declared as
external. This panics then the bootloader since we don't have the
unaligned access fault trap handler installed during boot time.
Avoid this optimization by declaring output_len as byte-aligned and thus
unbreak the bootloader code.
Additionally, compile the boot code optimized for size.
Signed-off-by: Helge Deller <deller@gmx.de>
