Commit Graph

647846 Commits

Author SHA1 Message Date
Marcelo Ricardo Leitner
58b94d88de sctp: do not loose window information if in rwnd_over
It's possible that we receive a packet that is larger than current
window. If it's the first packet in this way, it will cause it to
increase rwnd_over. Then, if we receive another data chunk (specially as
SCTP allows you to have one data chunk in flight even during 0 window),
rwnd_over will be overwritten instead of added to.

In the long run, this could cause the window to grow bigger than its
initial size, as rwnd_over would be charged only for the last received
data chunk while the code will try open the window for all packets that
were received and had its value in rwnd_over overwritten. This, then,
can lead to the worsening of payload/buffer ratio and cause rwnd_press
to kick in more often.

The fix is to sum it too, same as is done for rwnd_press, so that if we
receive 3 chunks after closing the window, we still have to release that
same amount before re-opening it.

Log snippet from sctp_test exhibiting the issue:
[  146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[  146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[  146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[  146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[  146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)
[  146.209232] sctp: sctp_assoc_rwnd_decrease:
association:ffff88013928e000 has asoc->rwnd:0, asoc->rwnd_over:1!
[  146.209232] sctp: sctp_assoc_rwnd_decrease: asoc:ffff88013928e000
rwnd decreased by 1 to (0, 1, 114221)

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 14:01:35 -05:00
Linus Torvalds
a307d0a007 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull final vfs updates from Al Viro:
 "Assorted cleanups and fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sg_write()/bsg_write() is not fit to be called under KERNEL_DS
  ufs: fix function declaration for ufs_truncate_blocks
  fs: exec: apply CLOEXEC before changing dumpable task flags
  seq_file: reset iterator to first record for zero offset
  vfs: fix isize/pos/len checks for reflink & dedupe
  [iov_iter] fix iterate_all_kinds() on empty iterators
  move aio compat to fs/aio.c
  reorganize do_make_slave()
  clone_private_mount() doesn't need to touch namespace_sem
  remove a bogus claim about namespace_sem being held by callers of mnt_alloc_id()
2016-12-23 10:52:43 -08:00
David S. Miller
e57cbe48a6 Merge branch 'virtio-net-xdp-fixes'
Jason Wang says:

====================
several fixups for virtio-net XDP

Merry Xmas and a Happy New year to all:

This series tries to fixes several issues for virtio-net XDP which
could be categorized into several parts:

- fix several issues during XDP linearizing
- allow csumed packet to work for XDP_PASS
- make EWMA rxbuf size estimation works for XDP
- forbid XDP when GUEST_UFO is support
- remove big packet XDP support
- add XDP support or small buffer

Please see individual patches for details.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:56 -05:00
Jason Wang
bb91accf27 virtio-net: XDP support for small buffers
Commit f600b69050 ("virtio_net: Add XDP support") leaves the case of
small receive buffer untouched. This will confuse the user who want to
set XDP but use small buffers. Other than forbid XDP in small buffer
mode, let's make it work. XDP then can only work at skb->data since
virtio-net create skbs during refill, this is sub optimal which could
be optimized in the future.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:56 -05:00
Jason Wang
c47a43d300 virtio-net: remove big packet XDP codes
Now we in fact don't allow XDP for big packets, remove its codes.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:55 -05:00
Jason Wang
92502fe86c virtio-net: forbid XDP when VIRTIO_NET_F_GUEST_UFO is support
When VIRTIO_NET_F_GUEST_UFO is negotiated, host could still send UFO
packet that exceeds a single page which could not be handled
correctly by XDP. So this patch forbids setting XDP when GUEST_UFO is
supported. While at it, forbid XDP for ECN (which comes only from GRO)
too to prevent user from misconfiguration.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:55 -05:00
Jason Wang
5c33474d41 virtio-net: make rx buf size estimation works for XDP
We don't update ewma rx buf size in the case of XDP. This will lead
underestimation of rx buf size which causes host to produce more than
one buffers. This will greatly increase the possibility of XDP page
linearization.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:55 -05:00
Jason Wang
b00f70b0da virtio-net: unbreak csumed packets for XDP_PASS
We drop csumed packet when do XDP for packets. This breaks
XDP_PASS when GUEST_CSUM is supported. Fix this by allowing csum flag
to be set. With this patch, simple TCP works for XDP_PASS.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:54 -05:00
Jason Wang
1830f8935f virtio-net: correctly handle XDP_PASS for linearized packets
When XDP_PASS were determined for linearized packets, we try to get
new buffers in the virtqueue and build skbs from them. This is wrong,
we should create skbs based on existed buffers instead. Fixing them by
creating skb based on xdp_page.

With this patch "ping 192.168.100.4 -s 3900 -M do" works for XDP_PASS.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:54 -05:00
Jason Wang
56a86f84b8 virtio-net: fix page miscount during XDP linearizing
We don't put page during linearizing, the would cause leaking when
xmit through XDP_TX or the packet exceeds PAGE_SIZE. Fix them by
put page accordingly. Also decrease the number of buffers during
linearizing to make sure caller can free buffers correctly when packet
exceeds PAGE_SIZE. With this patch, we won't get OOM after linearize
huge number of packets.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:54 -05:00
Jason Wang
275be061b3 virtio-net: correctly xmit linearized page on XDP_TX
After we linearize page, we should xmit this page instead of the page
of first buffer which may lead unexpected result. With this patch, we
can see correct packet during XDP_TX.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:54 -05:00
Jason Wang
73b62bd085 virtio-net: remove the warning before XDP linearizing
Since we use EWMA to estimate the size of rx buffer. When rx buffer
size is underestimated, it's usual to have a packet with more than one
buffers. Consider this is not a bug, remove the warning and correct
the comment before XDP linearizing.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 13:48:53 -05:00
Linus Torvalds
fc26901b12 befs fixes for 4.10-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYW7vZAAoJEGu/nxmHO1GNeGUIAJil3Q4ZaeOaaj5uNs4h64kc
 0BAfGSwzGNgreX5PWm+jQVeh6xbAqXnYtsWIDSibpxnXOhAZcXHbpzKLTwlMl4rh
 qpXAAWhHcBsOKiNcg++RRmouubYtpgMoOKCgo/DzGp51mSV7/8K2mugzDRohPUsR
 jUDqUa9qvt65uqI5xCuK1n3aLtCQ9m3RUzDfQbH4fK/yBXpNIE83xegU1SBJKZHj
 uGPJpjHhc1vaba6Y8vDDBHuJR9IJxfeSnoJE0xMmGlIub40exw7P4Dek1Tc/3G+R
 qiqT9aGAbegkFDerps5sqOLbU4Lm4Js8Ov78l3IN1FSVdYWsptzRibjIbUidPdc=
 =zypk
 -----END PGP SIGNATURE-----

Merge tag 'befs-v4.10-rc1' of git://github.com/luisbg/linux-befs

Pull befs updates from Luis de Bethencourt:
 "A series of small fixes and adding NFS export support"

* tag 'befs-v4.10-rc1' of git://github.com/luisbg/linux-befs:
  befs: add NFS export support
  befs: remove trailing whitespaces
  befs: remove signatures from comments
  befs: fix style issues in header files
  befs: fix style issues in linuxvfs.c
  befs: fix typos in linuxvfs.c
  befs: fix style issues in io.c
  befs: fix style issues in inode.c
  befs: fix style issues in debug.c
2016-12-23 10:46:15 -08:00
Linus Torvalds
01302aac12 drm initial fixes for 4.10 (intel, amd)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYXIQlAAoJEAx081l5xIa+WnEP/RDeTucoQrcKj66EU7Pq5kO6
 blF/mcn7RfcHnxDIWPQCASk+pyyeTpCq063H/SMvcqfsXA8M8/89INZK/zYlYCqX
 5dMjCuHoQ465V4LClY0VhWpeM2EPgvVWWFHvCE0tUQQKLvJRQjZHQl0zjqDzrfAR
 6lVNFE7nIbHPy6dlHw7Xe9kQmsW1GpQhsr4o31MpZIQdOwBHu2k4CzioSOwPLaDg
 u/RejB3dMdxfn7RKqyupSF8Z8VQ1yQE+LcTTlsc4CbfQf1YX8pijhFQShI6OBsz0
 3pIS6Veucd9QH2HQEA3eFptHocJ7XK6w8aIQ93hgJ2WR9JWIXrVwLrpNQss+HcOA
 9o5DriPwyYW1B5gZ86N652EWm+d5qIIJEAd4pcfAiQZDBzoVdMyUXZYcAV1yfsHI
 eWiJZgnxytlem7tFmFACmmQTCMOZZU1BlESVf5cSX1JQAVo7TCEhkIi6xbXDY8E9
 qU3NLETXZvaMIXJnDtI27wbXvzcK35cbskIwVPgd6ax9rV8IP33WmXXbs5CRtVwC
 EWAyu/n2s3LOUPwZ9Sack3Whtl2c55yywUe4SARROuVhGtpzz7xpCbasg0ecBTwl
 jEw1HhoonQAf/y5YxDVLX1SAMbiO7pSw9cmCKN6zCC2Iius5b4uBTpzbrQbUwUnc
 Vk2/cX2oZBMXSk4j54sZ
 =Taep
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-for-4.10-rc1' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Some fixes came in while I was out, mostly intel and amdgpu ones, with
  one ast fix"

Daniel Vetter says:
 "This should also shut up the WARN_ON(!intel_dp->lane_count) noise"

* tag 'drm-fixes-for-4.10-rc1' of git://people.freedesktop.org/~airlied/linux: (35 commits)
  drm/amdgpu: update tile table for oland/hainan
  drm/amdgpu: update tile table for verde
  drm/amdgpu: update rev id for verde
  drm/amdgpu: update golden setting for verde
  drm/amdgpu: update rev id for oland
  drm/amdgpu: update golden setting for oland
  drm/amdgpu: update rev id for hainan
  drm/amdgpu: update golden setting for hainan
  drm/amdgpu: update rev id for pitcairn
  drm/amdgpu: update golden setting for pitcairn
  drm/amdgpu: update golden setting/tiling table of tahiti
  drm/i915: skip the first 4k of stolen memory on everything >= gen8
  drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
  drm/i915: Fix use after free in logical_render_ring_init
  drm/i915: disable PSR by default on HSW/BDW
  drm/i915: Fix setting of boost freq tunable
  drm/i915: tune down the fast link training vs boot fail
  drm/i915: Reorder phys backing storage release
  drm/i915/gen9: Fix PCODE polling during SAGV disabling
  drm/i915/gen9: Fix PCODE polling during CDCLK change notification
  ...
2016-12-23 10:41:53 -08:00
Linus Torvalds
296915912d First round of -rc fixes for 4.10 kernel
- Series of qedr fixes
 - Series of rxe fixes
 - One isolated i40iw fix
 - One isolated cma fix
 - One isolated cxgb4 fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYXAGvAAoJELgmozMOVy/dDukQAMMNarWp0U8KfNYRU5tyCBwd
 aIQC1gFT6GUCFys40Z6L84m1D3NpGR+vzVv3grVBeuge73b79zAOHXvVDwJCA+Jl
 QQLG3vZ13C3158sLDiK8zL+4Ob5OfOQ5nQ2spvDfJWpye9SD+pWFcrpqvK02ANRN
 kFHILk1gROBTNi46yBR5hjWOkw7Bua6XLsPxh6xoaDZ43NL0r0xgm43FTnj/19x3
 0zpZYYKP+3C6U7678rqaog9zfXHvadghW5/WBJ/VgfKqEmH89ESx4J2MvbB8DxFD
 1tWAOpr5TNY5jnh8mtUsceDjCzQivc/RWqAu05BspEwcavjSLFyRYr1epR0/4oAd
 PqLSmfORmhpJ8+5Kmn+chtXo3TT4SYGHIzSUbgbEV/ClwX/7UW+w8mfQZ3buUBq/
 cQp/oRnJcsrQIEDFO3AH7P+6Sxy6t3zbSl5oKBUOI1u4RFmC7YBPqo9fQu2Z2mGk
 3+AWQaPr7qgEcFzXBgLzvd4LhTYKsvmiNwrcXi9KjjwQjNEVg15qqF2YtmxEUgi9
 kh3IOcGan3iSblhV/WLrxcOjlPQrPpBOVnTPhUskFtlsrD+032OxeOBpVoU3nCUt
 MjTYWoNTYdw4wHz0w373o0uR4+4nl4a5OmO4Fh6Drmg5hm4Bl9BWy0Kziu93Z1Ay
 Z2utZVWLWhBzn8yJujUz
 =NW9g
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 "First round of -rc fixes for 4.10 kernel:

   - a series of qedr fixes
   - a series of rxe fixes
   - one i40iw fix
   - one cma fix
   - one cxgb4 fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/rxe: Don't check for null ptr in send()
  IB/rxe: Drop future atomic/read packets rather than retrying
  IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sends
  qedr: Always notify the verb consumer of flushed CQEs
  qedr: clear the vendor error field in the work completion
  qedr: post_send/recv according to QP state
  qedr: ignore inline flag in read verbs
  qedr: modify QP state to error when destroying it
  qedr: return correct value on modify qp
  qedr: return error if destroy CQ failed
  qedr: configure the number of CQEs on CQ creation
  i40iw: Set 128B as the only supported RQ WQE size
  IB/cma: Fix a race condition in iboe_addr_get_sgid()
  IB/rxe: Fix a memory leak in rxe_qp_cleanup()
  iw_cxgb4: set correct FetchBurstMax for QPs
2016-12-23 10:38:48 -08:00
Linus Torvalds
f290cbacb6 SCSI for-linus on 20161222
This is mostly stuff which missed the initial pull.  There's a new
 driver: qedi, some ufs, ibmvscsis and ncr5380 updates plus some
 assorted driver fixes and also a fix for the bug where if a device
 goes into a blocked state between configuration and sysfs device add
 (which can be a long time under async probing) it would become
 permanently blocked.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYXDugAAoJEAVr7HOZEZN4MO4P/2FM+U9uxjSMnHlnnEf/zVNE
 pqYS8vxdnoPwbuzd++uFTneLa8xMGXPmX4X0t6tZQsi9w+ZDAUYPWEjH2TPCa112
 V6y9bDKTnkXyLUo78dIRIJXb0lVSi2bCYi0R9x6HA2wyU4/NRhYtCSbYTONEzHkk
 Y3aADV6kLQf8NNsqExFmtY1XNCc+xjSistcJwbmIkFAB8qdVFo2xo0qa6Sb1SEsX
 WzER/6GdZOVblEy6llmlfSG3h8XPfbxVvqdHvTLlkCUjQsOucjzhxZZ1TGcqWhWB
 XQGuXlfOTJN1O6ZEAFfZdiz7g/1NGjwczUP4x99S2NiPFD76C34ncRBFiYODvdYs
 izsctB4l4cZmBNdYQSYGYxY5emJrmv1JCvtaqLxl2sQ+XIxGRv/t3yAWisdQi3My
 UlGVZw8lyxPNY/+E7vuC9QvFlDW2FBTop8VPH/wvZFB3cuDssHr6Uogx9oxuX/BY
 LfYu7GsGCcMigyot6MKiUMlT5Od4cHDlTaQE5kfgCSCP0s8Ssi7CQv2/CnpmWln+
 HU/zDC+CRzZjkcCNy7nsgUhCEWKMWcPPTQ/HMpXDMRUIMfweHDUJ/cM5tRyqb0kl
 n8TROG9Ptma2A2EcDYtkAqX+XqzE0RUTwDwcQhSQR/XJZEHmsVlXGyCcY3sx3UmZ
 5q9bgMoRLWzsiTuZSqBR
 =Zofc
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull late SCSI updates from James Bottomley:
 "This is mostly stuff which missed the initial pull.

  There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380
  updates plus some assorted driver fixes and also a fix for the bug
  where if a device goes into a blocked state between configuration and
  sysfs device add (which can be a long time under async probing) it
  would become permanently blocked"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
  scsi: avoid a permanent stop of the scsi device's request queue
  scsi: mpt3sas: Recognize and act on iopriority info
  scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.
  scsi: qla2xxx: Add Block Multi Queue functionality.
  scsi: qla2xxx: Add multiple queue pair functionality.
  scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.
  scsi: qla2xxx: Only allow operational MBX to proceed during RESET.
  scsi: hpsa: remove memory allocate failure message
  scsi: Update 3ware driver email addresses
  scsi: zfcp: fix rport unblock race with LUN recovery
  scsi: zfcp: do not trace pure benign residual HBA responses at default level
  scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
  scsi: libcxgbi: return error if interface is not up
  scsi: cxgb4i: libcxgbi: add missing module_put()
  scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature
  scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters
  scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx
  scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.
  scsi: aacraid: remove wildcard for series 9 controllers
  scsi: ibmvscsi: add write memory barrier to CRQ processing
  ...
2016-12-23 10:36:19 -08:00
Linus Torvalds
42e0372c0e 2nd round of ARC udpates for 4.10rc1
- Fix for aliasing VIPT dcache in old ARC700 cores
 
  - micro-optimization in ARC700 ProtV handler
 
  - Enable SG_CHAIN  [Vladimir]
 
  - ARC HS38 core intc default to prio 1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYXHQ1AAoJEGnX8d3iisJeGpMP/2IIx1JxYklDRluSHkA3ekr3
 OJBQrMBJbvRW2s4kD9brHgzZwMAJTjO4b7DGOLcd7w12fCRc0fuzRysyuW5x5Sky
 ovubNwneGBb2T4SDjI6VKibWBfOZARiyE5ROfHF4vmgAAALFUtGlztm4ZjyPy6Mw
 jN/rAQLyvNSv29gYmmOiq/lH68qJSmVzR6otBVpil4veleXIv5f093ujao2Egjb2
 DPnzUBjTJ/QvmtWhinxQqdepq4G0Oeo//+lbDeWYFHIdYdwT0o0v6XzeTjr7whKI
 KKPPDRMMSzsNAuqGU1ufD+5E/oVruUNcnlepfbvfTgN+g3kXB0e6S+nFlkAKHcCG
 3VcifR+2M73ZIS0Jhdx5Gb9uSvXA0sYg/GEhiV0PdCi86ntcp+SlpVs7POdyKmb8
 zDvIZyFnLofWaOc8Oiugtb0kOfENFzrc8xXVRsLeECngAXQq8Eaz23yVqRLQaCwY
 uIFl7k0IVpIYLZrDOKOsN+eJrE2JW3eftZFfwktOwdA1JL6AqEvlXDWsjHTmIpcB
 pGJOYvIGFdlT74HSrKEnDKMlcP3dIqN888CBeNrck+wrqlGpvZWD4kytCiHpR95c
 xiXDQNZassmT9ispCRA/dxpPjUksxfhZgPiin93GiUSXk55WX5EomNbAiJz/oCqT
 pAv9Y10C3o+hifgV9r9F
 =1qMs
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull more ARC updates from Vineet Gupta:

 - Fix for aliasing VIPT dcache in old ARC700 cores

 - micro-optimization in ARC700 ProtV handler

 - Enable SG_CHAIN  [Vladimir]

 - ARC HS38 core intc default to prio 1

* tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache
  ARC: mm: No need to save cache version in @cpuinfo
  ARC: enable SG chaining
  ARCv2: intc: default all interrupts to priority 1
  ARCv2: entry: document intr disable in hard isr
  ARC: ARCompact entry: elide re-reading ECR in ProtV handler
2016-12-23 10:22:47 -08:00
David S. Miller
d3a51d6cbc Merge branch 'mlxsw-router-fixes'
Jiri Pirko says:

====================
mlxsw: Router fixes

Ido says:

First two patches ensure we remove from the device's table neighbours
that are considered to be dead by the neighbour core.

The last patch removes nexthop groups from the device when they are no
longer valid.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:31:20 -05:00
Ido Schimmel
58312125da mlxsw: spectrum_router: Correctly remove nexthop groups
At the end of the nexthop initialization process we determine whether
the nexthop should be offloaded or not based on the NUD state of the
neighbour representing it. After all the nexthops were initialized we
refresh the nexthop group and potentially offload it to the device, in
case some of the nexthops were resolved.

Make the destruction of a nexthop group symmetric with its creation by
marking all nexthops as invalid and then refresh the nexthop group to
make sure it was removed from the device's tables.

Fixes: b2157149b0 ("mlxsw: spectrum_router: Add the nexthop neigh activity update")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:31:19 -05:00
Ido Schimmel
93a87e5e79 mlxsw: spectrum_router: Don't reflect dead neighs
When a neighbour is considered to be dead, we should remove it from the
device's table regardless of its NUD state.

Without this patch, after setting a port to be administratively down we
get the following errors when we periodically try to update the kernel
about neighbours activity:

[  461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find
matching neighbour for IP=192.168.100.2

Fixes: a6bf9e933d ("mlxsw: spectrum_router: Offload neighbours based on NUD state change")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:31:19 -05:00
Ido Schimmel
53f800e3ba neigh: Send netevent after marking neigh as dead
neigh_cleanup_and_release() is always called after marking a neighbour
as dead, but it only notifies user space and not in-kernel listeners of
the netevent notification chain.

This can cause multiple problems. In my specific use case, it causes the
listener (a switch driver capable of L3 offloads) to believe a neighbour
entry is still valid, and is thus erroneously kept in the device's
table.

Fix that by sending a netevent after marking the neighbour as dead.

Fixes: a6bf9e933d ("mlxsw: spectrum_router: Offload neighbours based on NUD state change")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:31:18 -05:00
Dave Jones
a98f917589 ipv6: handle -EFAULT from skb_copy_bits
By setting certain socket options on ipv6 raw sockets, we can confuse the
length calculation in rawv6_push_pending_frames triggering a BUG_ON.

RIP: 0010:[<ffffffff817c6390>] [<ffffffff817c6390>] rawv6_sendmsg+0xc30/0xc40
RSP: 0018:ffff881f6c4a7c18  EFLAGS: 00010282
RAX: 00000000fffffff2 RBX: ffff881f6c681680 RCX: 0000000000000002
RDX: ffff881f6c4a7cf8 RSI: 0000000000000030 RDI: ffff881fed0f6a00
RBP: ffff881f6c4a7da8 R08: 0000000000000000 R09: 0000000000000009
R10: ffff881fed0f6a00 R11: 0000000000000009 R12: 0000000000000030
R13: ffff881fed0f6a00 R14: ffff881fee39ba00 R15: ffff881fefa93a80

Call Trace:
 [<ffffffff8118ba23>] ? unmap_page_range+0x693/0x830
 [<ffffffff81772697>] inet_sendmsg+0x67/0xa0
 [<ffffffff816d93f8>] sock_sendmsg+0x38/0x50
 [<ffffffff816d982f>] SYSC_sendto+0xef/0x170
 [<ffffffff816da27e>] SyS_sendto+0xe/0x10
 [<ffffffff81002910>] do_syscall_64+0x50/0xa0
 [<ffffffff817f7cbc>] entry_SYSCALL64_slow_path+0x25/0x25

Handle by jumping to the failure path if skb_copy_bits gets an EFAULT.

Reproducer:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>

#define LEN 504

int main(int argc, char* argv[])
{
	int fd;
	int zero = 0;
	char buf[LEN];

	memset(buf, 0, LEN);

	fd = socket(AF_INET6, SOCK_RAW, 7);

	setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4);
	setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN);

	sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110);
}

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:20:39 -05:00
Willem de Bruijn
39b2dd765e inet: fix IP(V6)_RECVORIGDSTADDR for udp sockets
Socket cmsg IP(V6)_RECVORIGDSTADDR checks that port range lies within
the packet. For sockets that have transport headers pulled, transport
offset can be negative. Use signed comparison to avoid overflow.

Fixes: e6afc8ace6 ("udp: remove headers from UDP packets before queueing")
Reported-by: Nisar Jagabar <njagabar@cloudmark.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 12:19:18 -05:00
David S. Miller
9aa340a5c3 Merge branch 'cls_flower-act_tunnel_key-fixes'
Or Gerlitz says:

====================
net/sched fixes for cls_flower and act_tunnel_key

This small series contain a fix to the matching flags support
in flower and to the tunnel key action MD prep for IPv6.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 11:59:57 -05:00
Or Gerlitz
d9724772e6 net/sched: cls_flower: Mandate mask when matching on flags
When matching on flags, we should require the user to provide the
mask and avoid using an all-ones mask. Not doing so causes matching
on flags provided w.o mask to hit on the value being unset for all
flags, which may not what the user wanted to happen.

Fixes: faa3ffce78 ('net/sched: cls_flower: Add support for matching on flags')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 11:59:56 -05:00
Or Gerlitz
dc594ecd41 net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6
The UDP dst port was provided to the helper function which sets the
IPv6 IP tunnel meta-data under a wrong param order, fix that.

Fixes: 75bfbca01e ('net/sched: act_tunnel_key: Add UDP dst port option')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 11:59:56 -05:00
jpinto
567be78659 stmmac: CSR clock configuration fix
When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23 11:46:37 -05:00
Al Viro
faf0dcebd7 Merge branch 'work.namespace' into for-linus 2016-12-22 23:04:31 -05:00
Al Viro
128394eff3 sg_write()/bsg_write() is not fit to be called under KERNEL_DS
Both damn things interpret userland pointers embedded into the payload;
worse, they are actually traversing those.  Leaving aside the bad
API design, this is very much _not_ safe to call with KERNEL_DS.
Bail out early if that happens.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:03:42 -05:00
Jeff Layton
f698cccbc8 ufs: fix function declaration for ufs_truncate_blocks
sparse says:

    fs/ufs/inode.c:1195:6: warning: symbol 'ufs_truncate_blocks' was not declared. Should it be static?

Note that the forward declaration in the file is already marked static.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:03:41 -05:00
Aleksa Sarai
613cc2b6f2 fs: exec: apply CLOEXEC before changing dumpable task flags
If you have a process that has set itself to be non-dumpable, and it
then undergoes exec(2), any CLOEXEC file descriptors it has open are
"exposed" during a race window between the dumpable flags of the process
being reset for exec(2) and CLOEXEC being applied to the file
descriptors. This can be exploited by a process by attempting to access
/proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE.

The race in question is after set_dumpable has been (for get_link,
though the trace is basically the same for readlink):

[vfs]
-> proc_pid_link_inode_operations.get_link
   -> proc_pid_get_link
      -> proc_fd_access_allowed
         -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);

Which will return 0, during the race window and CLOEXEC file descriptors
will still be open during this window because do_close_on_exec has not
been called yet. As a result, the ordering of these calls should be
reversed to avoid this race window.

This is of particular concern to container runtimes, where joining a
PID namespace with file descriptors referring to the host filesystem
can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect
against access of CLOEXEC file descriptors -- file descriptors which may
reference filesystem objects the container shouldn't have access to).

Cc: dev@opencontainers.org
Cc: <stable@vger.kernel.org> # v3.2+
Reported-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:03:41 -05:00
Tomasz Majchrzak
e522751d60 seq_file: reset iterator to first record for zero offset
If kernfs file is empty on a first read, successive read operations
using the same file descriptor will return no data, even when data is
available. Default kernfs 'seq_next' implementation advances iterator
position even when next object is not there. Kernfs 'seq_start' for
following requests will not return iterator as position is already on
the second object.

This defect doesn't allow to monitor badblocks sysfs files from MD raid.
They are initially empty but if data appears at some stage, userspace is
not able to read it.

Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:03:06 -05:00
Darrick J. Wong
22725ce4e4 vfs: fix isize/pos/len checks for reflink & dedupe
Strengthen the checking of pos/len vs. i_size, clarify the return values
for the clone prep function, and remove pointless code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:00:23 -05:00
Al Viro
33844e6651 [iov_iter] fix iterate_all_kinds() on empty iterators
Problem similar to ones dealt with in "fold checks into iterate_and_advance()"
and followups, except that in this case we really want to do nothing when
asked for zero-length operation - unlike zero-length iterate_and_advance(),
zero-length iterate_all_kinds() has no side effects, and callers are simpler
that way.

That got exposed when copy_from_iter_full() had been used by tipc, which
builds an msghdr with zero payload and (now) feeds it to a primitive
based on iterate_all_kinds() instead of iterate_and_advance().

Reported-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 23:00:22 -05:00
Al Viro
c00d2c7e89 move aio compat to fs/aio.c
... and fix the minor buglet in compat io_submit() - native one
kills ioctx as cleanup when put_user() fails.  Get rid of
bogus compat_... in !CONFIG_AIO case, while we are at it - they
should simply fail with ENOSYS, same as for native counterparts.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-22 22:58:37 -05:00
James Bottomley
3eff4c7828 Merge branch 'misc' into for-linus 2016-12-22 12:32:33 -08:00
Namhyung Kim
bdd75729e5 perf sched timehist: Fix invalid period calculation
When --time option is given with a value outside recorded time, the last
sample time (tprev) was set to that value and run time calculation might
be incorrect.  This is a problem of the first samples for each cpus
since it would skip the runtime update when tprev is 0.  But with --time
option it had non-zero (which is invalid) value so the calculation is
also incorrect.

For example, let's see the followging:

  $ perf sched timehist
             time    cpu  task name                       wait time  sch delay   run time
                          [tid/pid]                          (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  ---------  ---------  ---------
      3195.968367 [0003]  <idle>                              0.000      0.000      0.000
      3195.968386 [0002]  Timer[4306/4277]                    0.000      0.000      0.018
      3195.968397 [0002]  Web Content[4277]                   0.000      0.000      0.000
      3195.968595 [0001]  JS Helper[4302/4277]                0.000      0.000      0.000
      3195.969217 [0000]  <idle>                              0.000      0.000      0.621
      3195.969251 [0001]  kworker/1:1H[291]                   0.000      0.000      0.033

The sample starts at 3195.968367 but when I gave a time interval from
3194 to 3196 (in sec) it will calculate the whole 2 second as runtime.
In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as
idle time.

Before:

  $ perf sched timehist --time 3194,3196 -s | tail
  Idle stats:
      CPU  0 idle for   1995.991  msec
      CPU  1 idle for     20.793  msec
      CPU  2 idle for     30.191  msec
      CPU  3 idle for   1999.852  msec

      Total number of unique tasks: 23
  Total number of context switches: 128
             Total run time (msec): 3724.940

After:

  $ perf sched timehist --time 3194,3196 -s | tail
  Idle stats:
      CPU  0 idle for     10.811  msec
      CPU  1 idle for     20.793  msec
      CPU  2 idle for     30.191  msec
      CPU  3 idle for     18.337  msec

      Total number of unique tasks: 23
  Total number of context switches: 128
             Total run time (msec): 18.139

Committer notes:

Further testing:

Before:

  Idle stats:
      CPU  0 idle for    229.785  msec
      CPU  1 idle for    937.944  msec
      CPU  2 idle for    188.931  msec
      CPU  3 idle for    986.185  msec

  After:

  # perf sched timehist --time 40602,40603 -s | tail

  Idle stats:
      CPU  0 idle for    229.785  msec
      CPU  1 idle for    175.407  msec
      CPU  2 idle for    188.931  msec
      CPU  3 idle for    223.657  msec

      Total number of unique tasks: 68
  Total number of context switches: 814
             Total run time (msec): 97.688

  # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done
  CPU 0 idle for 229.721 msec (entries: 123)
  CPU 1 idle for 175.381 msec (entries: 65)
  CPU 2 idle for 188.903 msec (entries: 56)
  CPU 3 idle for 223.61 msec (entries: 102)

Difference due to the idle stats being accounted at nanoseconds precision while
the <idle> entries in 'perf sched timehist' are trucated at msec.usec.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22 16:35:46 -03:00
Namhyung Kim
4fa0d1aa27 perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
Now that the default 'comm_width' value is 30, no need to check that at
print_summary,

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22 16:35:46 -03:00
Namhyung Kim
9b8087d720 perf sched timehist: Enlarge default 'comm_width'
Current default value is 20 but it's easily changed to a bigger value as
task has a long name and different tid and pid.  And it makes the output
not aligned.  So change it to have a large value as summary shows.

Committer notes:

Before:

  # perf sched record
  ^C
  # perf sched timehist
  <SNIP>
    40602.770537 [0001]  rcuos/2[29]               7.970      0.002      0.020
    40602.771512 [0003]  <idle>                    0.003      0.000      0.986
    40602.771586 [0001]  <idle>                    0.020      0.000      1.049
    40602.771606 [0001]  qemu-system-x86[3593/3510]      0.000      0.002      0.020
    40602.771629 [0003]  qemu-system-x86[3510]           0.000      0.003      0.116
    40602.771776 [0000]  <idle>                          0.001      0.000      1.892
  <SNIP>

After:

  # perf sched timehist
  <SNIP>
   40602.770537 [0001]  rcuos/2[29]                         7.970      0.002      0.020
   40602.771512 [0003]  <idle>                              0.003      0.000      0.986
   40602.771586 [0001]  <idle>                              0.020      0.000      1.049
   40602.771606 [0001]  qemu-system-x86[3593/3510]          0.000      0.002      0.020
   40602.771629 [0003]  qemu-system-x86[3510]               0.000      0.003      0.116
  <SNIP>

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22 16:35:45 -03:00
Namhyung Kim
0e6758e823 perf sched timehist: Honour 'comm_width' when aligning the headers
Current default value is 20, but that may change in the future, so make
places where we have 20 hardcoded use 'comm_width'.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22 16:35:45 -03:00
Dave Airlie
4a401ceeef Merge tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
First set of i915 fixes for code in next.

* tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: skip the first 4k of stolen memory on everything >= gen8
  drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
  drm/i915: Fix use after free in logical_render_ring_init
  drm/i915: disable PSR by default on HSW/BDW
  drm/i915: Fix setting of boost freq tunable
  drm/i915: tune down the fast link training vs boot fail
  drm/i915: Reorder phys backing storage release
  drm/i915/gen9: Fix PCODE polling during SAGV disabling
  drm/i915/gen9: Fix PCODE polling during CDCLK change notification
  drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting
  drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET
  drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
  drm/i915: drop the struct_mutex when wedged or trying to reset
2016-12-23 05:28:02 +10:00
Dave Airlie
d043835d08 Merge tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Here's the one lonely bugfix I talked about on irc.

* tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc:
  drivers/gpu/drm/ast: Fix infinite loop if read fails
2016-12-23 05:26:55 +10:00
Dave Airlie
6df383cf90 Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- fix display regression on DCE6/8
- Powergating fixes for GFX8
- amdgpu SI fixes (golden settings, proper rev id setup, etc.)

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
  drm/amdgpu: update tile table for oland/hainan
  drm/amdgpu: update tile table for verde
  drm/amdgpu: update rev id for verde
  drm/amdgpu: update golden setting for verde
  drm/amdgpu: update rev id for oland
  drm/amdgpu: update golden setting for oland
  drm/amdgpu: update rev id for hainan
  drm/amdgpu: update golden setting for hainan
  drm/amdgpu: update rev id for pitcairn
  drm/amdgpu: update golden setting for pitcairn
  drm/amdgpu: update golden setting/tiling table of tahiti
  drm/amdgpu: fix cursor setting of dce6/dce8
  drm/amdgpu: refine set clock gating for tonga/polaris
  drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.
  drm/amdgpu: add new gfx cg flags.
  drm/amdgpu: fix pg can't be disabled by PG mask.
  drm/amdgpu: always initialize gfx pg for gfx_v8.0.
  drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.
  drm/amdgpu: fix init save/restore list in gfx_v8.0
  drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.
  ...
2016-12-23 05:25:12 +10:00
Linus Torvalds
50f6584e4c Update Jacek Anaszewski's email address
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYXAeZAAoJEL1qUBy3i3wmDfAP/iMBlZAAdY0U3WmXpXkhQDB0
 qbYXvFqy6ccZN/o5oabsHFqW/2DZqpeUnwQACCljLgbcUUuzcuNuYIES2bayp3Bi
 7f4ZpE+sibJaSnhH3zikqV9OZzIArkO7HyIg8z+lSqM+Sjvbe6PLFr8oXisU47bQ
 +RamJRVEdzII6l8+Y2r6CAHZohAH1Fl+MSPChCuIk8LPGFZz43Oejr+odSApQgQj
 k+QZfLKHou98RWB++oc+t0wtfw+edpXBdW02aKV7fN/BvRffjnYR+om5rzrN5uYE
 Ufv6NP/WCgQN+WLulcTr7kzEk+6kqt/nVrTFcTHFVbz1ef8GYjf1bPpmIABVi23P
 EDHQvDJEFipYb+pr7+lu6g+xZhggM/oxS129lEuXj4mdJp8i8vtvTr05JlFH1Gij
 sV0NOkvkiotR77aFqbGeHU5mh2mi861QoIm2zBg9fjenRLk6el0P4m0bmOIRLY3A
 nzLzJiFYYE+AB54F+roKJEh+nzpbartz5cZAKtXUcpECZPxFJdFGZevX+SYrerIc
 /j/LmtMCO/4vEvAt4dsMxZdzpZGgFNhJ2QKPl4C/NS8uiXObHaW5/8Fp2/3cgWuI
 c+2Si4+AKxdf/5lTtOqb9+3l0CexKMPFYt+19sdWap+dbSNTyi54yVei7qCybKx1
 aYayPhaqG74Ab/YjncWB
 =Fx3S
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED maintainer email update from Jacek Anaszewski:
 "Update Jacek Anaszewski's email address"

* tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: Update Jacek Anaszewski's email address
2016-12-22 10:31:30 -08:00
Linus Torvalds
af22941ae1 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "Just a set of small fixes that have either been queued up after the
  original pull for this merge window, or just missed the original pull
  request.

   - a few bcache fixes/changes from Eric and Kent

   - add WRITE_SAME to the command filter whitelist frm Mauricio

   - kill an unused struct member from Ritesh

   - partition IO alignment fix from Stefan

   - nvme sysfs printf fix from Stephen"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: check partition alignment
  nvme : Use correct scnprintf in cmb show
  block: allow WRITE_SAME commands with the SG_IO ioctl
  block: Remove unused member (busy) from struct blk_queue_tag
  bcache: partition support: add 16 minors per bcacheN device
  bcache: Make gc wakeup sane, remove set_task_state()
2016-12-22 10:23:39 -08:00
Linus Torvalds
9be962d525 More ACPI updates for v4.10-rc1
- Move some Linux-specific functionality to upstream ACPICA and
    update the in-kernel users of it accordingly (Lv Zheng).
 
  - Drop a useless warning (triggered by the lack of an optional
    object) from the ACPI namespace scanning code (Zhang Rui).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYW90kAAoJEILEb/54YlRxS78P/RZwSOwkgdowIMGOlO7Hz5Xz
 6Psjfc3QdGhVGOau4F3Irg7HIDsPaHE5+xijwujWFK0wh89tknrChrFDrOueND6K
 rZ4w72lYROQhtQl4bu9yXZ2TswP3I5aYERDPyqKfDAi+SaQBpZUtmWdoh0I/JN2M
 svyuzxoRlNglgp2GWPnnnKHFe6plEeZgKjgoGjPAufDHakqYvP0cQwY3i4+PpuYh
 prXb4Xr4fFvAG2MhM9ciT02ewrQJcYUgVj5bnuSBmMu0y0zUBJ1kK7abiQlf+lTy
 /BCqQbllhHrrXQD0zkqi2oBFqWL4Bnj9r+5zj03KmBsfoz3u+zXr5CApDei8Yc06
 gGIZXX9aCqBirahkpsMFYPEQVPoPFCek0slXSyF5xKjCWYyocwgUtHnB87uIiSFO
 jCeSsWwT5IO9HnbsTf6x4xDWBdY6LOJgJyDirIGcNSUX+q4tfgn/LFrgN9Ck4M2g
 xkZn8e8H7u09ACX9l6dHZ1PCHlg7bWKeH6gcqdo5R4NOVeZxt9YDIz13ERsG3D17
 JZvdrAbBdC1fXfHnOLBj/BRy+TFvieWOC+kHBTAnPQlnkr7NjXXv/vgWU8flVL/z
 kxlR2U2lD2XarG/b8OHvYxO2k/TDLRenN0IqqFmYbmyhH0dHYKGGBLY4TetAXKNL
 N4EouS+xUBulCP2XOI8N
 =55TG
 -----END PGP SIGNATURE-----

Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "Here are new versions of two ACPICA changes that were deferred
  previously due to a problem they had introduced, two cleanups on top
  of them and the removal of a useless warning message from the ACPI
  core.

  Specifics:

   - Move some Linux-specific functionality to upstream ACPICA and
     update the in-kernel users of it accordingly (Lv Zheng)

   - Drop a useless warning (triggered by the lack of an optional
     object) from the ACPI namespace scanning code (Zhang Rui)"

* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
  ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
  ACPICA: Tables: Allow FADT to be customized with virtual address
  ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
  ACPI: do not warn if _BQC does not exist
2016-12-22 10:19:32 -08:00
Linus Torvalds
85ba70b6ce Power management fixes for v4.10-rc1
- Prevent the acpi-cpufreq driver from crashing on exit by fixing
    a check against the __cpuhp_setup_state() return value and fix
    the kerneldoc description of that function to make it clear that
    it may return positive numbers on success too (Boris Ostrovsky).
 
  - Drop an incorrect __init annotation of a function in the
    s3c64xx cpufreq driver and fix a build warning generated (by
    older compilers) because of it (Arnd Bergmann).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYW9x5AAoJEILEb/54YlRx1HQQAJnHi7cmS2rJadnKeXJoY1ob
 I6fjYLgF7+68I3z+zs2HV5IxMPzJstdIn93xnugB8LXFM7bvAB4KuAWG0dEP2JMZ
 HtyjXNlSmogXlpgj3EcAgTQqpCHKxkB4Y1j0wLBZARkV6S+/B7oWhNigQITacoZR
 ZAcTNAU9KlUy9WM4tLQ5LD7cwVWIRNlGDQXLarNLHgYnFXcjosAy6SbL0mS0UfIx
 6YS5Q5a/xKbeT4uEeQE7WutqempcVL2E0wnqZErmg/Be421C454TbAcq7y+nEq5C
 gfaq8EjZ9oFcM9yKi65qW2rFJwntF4LK9jZrDxm/oSssjgzpdnbCTk4WYqjx/Mio
 7fWQRPalEsVJBz5+KLgmte/UYm5IA1krwiJTFchKPq15FGlfx65RoN5FmW+bfSt2
 5o/fYLB+KMdH06sc+U9bCH9c5cx3XQzksTQ+MXUju/B5iBnxJETpbg4CIyyK2S/z
 cXwgrvKh7EgbPHGQjtptAUFIYRU/5IGH1OOlbeIsjJmCSxuvsLLpn2f74QnRr8jk
 XTGVikKaxyiA/HUxJkW2AAgqGsRXCkjpkLYCy6DnGuvKJT2L4xEaRWCRvhAOPhKS
 nGgdMvRII2l0zN5stfKNjvbM0gLYiedTsCqe5JF5uhaZlxYie5nnRkVkveek0U4c
 i5xb94AHPk33vrUDBwTE
 =5bie
 -----END PGP SIGNATURE-----

Merge tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "They fix one bug introduced recently, a build warning and a kerneldoc
  function description.

  Specifics:

   - Prevent the acpi-cpufreq driver from crashing on exit by fixing a
     check against the __cpuhp_setup_state() return value and fix the
     kerneldoc description of that function to make it clear that it may
     return positive numbers on success too (Boris Ostrovsky)

   - Drop an incorrect __init annotation of a function in the s3c64xx
     cpufreq driver and fix a build warning generated (by older
     compilers) because of it (Arnd Bergmann)"

* tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: s3c64xx: remove incorrect __init annotation
  cpufreq: Remove CPU hotplug callbacks only if they were initialized
  CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
2016-12-22 10:15:05 -08:00
Linus Torvalds
8d86cf8879 MMC core:
- Further fix thread wake-up for requests
  - Use a bounce buffer to fix DMA issue for SSR register read
 
 MMC host:
  - sdhci: Fix a regression for runtime PM
  - sdhci-cadence: Add a proper SoC specific DT compatible
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYWjTHAAoJEP4mhCVzWIwpQGIP/iYBC90rFPhoq8ba8fdngFuD
 RBuuw+yW+ueCcFuogrm7eSHnOS/FWWl4iYDnX6CJOuto4HYh+rexzLT3YlA2wbid
 jEFi59lVA3xDEP9hpBGavp1IJV7XVh4uCH4NsVbceQ9MoIpJwFkUxDY5zMdPmKG6
 Pt4jaXsoxhcAYro5ORH5q4BzX4bfluUKSYsgBBUsQMxhOQy02CKgvfJ3/aR7+Tqg
 3f/3tQVOXMmI+NhLC5y++VoxL5YoTos6WHgIoA7kuXPvVkVV89jxvLWZKzbsNVHC
 iZ6DNdaMwmSSK5BwfSzSXReAA4zce+yw55O0j/dTc+EKdJJ7/oW3y/fpda6lrGy7
 dRG4RXumBrVUqOAobx6J/KibM94gIsdaOZ4sCptn48x1NeRafsGc4fq+76tpIvHe
 16dn9xIqcz4hZU4GsQSgNpo4DFJCE6K4yuYgtuKP+qvUGBFyRoGzwo5mf6hxJovT
 YviqLmqsOjaZ6F202HMaJtYgSQBv/lScL9vp40H7T5yrIbR2mx4ww2FyNWLWXqRY
 4IJ6F8gwu1xUafCi5LUNk+pU1J1bjIKTSeR3enRIpudEzmy9/oroQDOtLh+1T4Z6
 CVkdxmgd6jrs7sK9pPURKhDuMgZH7hUAuFxg3JMRMEdCOzsTwuAHnDq0DtrjSOC9
 hYw+dqDJHut0To290N5r
 =PDPZ
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - further fix thread wake-up for requests
   - use a bounce buffer to fix DMA issue for SSR register read

  MMC host:
   - sdhci: Fix a regression for runtime PM
   - sdhci-cadence: Add a proper SoC specific DT compatible"

* tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sd: Meet alignment requirements for raw_ssr DMA
  mmc: core: Further fix thread wake-up
  mmc: sdhci: Fix to handle MMC_POWER_UNDEFINED
  mmc: sdhci-cadence: add Socionext UniPhier specific compatible string
2016-12-22 10:13:04 -08:00
Linus Torvalds
67327145c4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SElinux fix from James Morris:
 "From Paul:
   'A small SELinux patch to fix some clang/llvm compiler warnings and
    ensure the tools under scripts work well in the face of kernel
    changes'"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: use the kernel headers when building scripts/selinux
2016-12-22 10:03:52 -08:00
Linus Torvalds
eb254f323b Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache allocation interface from Thomas Gleixner:
 "This provides support for Intel's Cache Allocation Technology, a cache
  partitioning mechanism.

  The interface is odd, but the hardware interface of that CAT stuff is
  odd as well.

  We tried hard to come up with an abstraction, but that only allows
  rather simple partitioning, but no way of sharing and dealing with the
  per package nature of this mechanism.

  In the end we decided to expose the allocation bitmaps directly so all
  combinations of the hardware can be utilized.

  There are two ways of associating a cache partition:

   - Task

     A task can be added to a resource group. It uses the cache
     partition associated to the group.

   - CPU

     All tasks which are not member of a resource group use the group to
     which the CPU they are running on is associated with.

     That allows for simple CPU based partitioning schemes.

  The main expected user sare:

   - Virtualization so a VM can only trash only the associated part of
     the cash w/o disturbing others

   - Real-Time systems to seperate RT and general workloads.

   - Latency sensitive enterprise workloads

   - In theory this also can be used to protect against cache side
     channel attacks"

[ Intel RDT is "Resource Director Technology". The interface really is
  rather odd and very specific, which delayed this pull request while I
  was thinking about it. The pull request itself came in early during
  the merge window, I just delayed it until things had calmed down and I
  had more time.

  But people tell me they'll use this, and the good news is that it is
  _so_ specific that it's rather independent of anything else, and no
  user is going to depend on the interface since it's pretty rare. So if
  push comes to shove, we can just remove the interface and nothing will
  break ]

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86/intel_rdt: Implement show_options() for resctrlfs
  x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled
  x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount
  x86/intel_rdt: Fix setting of closid when adding CPUs to a group
  x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee
  x86/intel_rdt: Reset per cpu closids on unmount
  x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A
  x86/intel_rdt: Prevent deadlock against hotplug lock
  x86/intel_rdt: Protect info directory from removal
  x86/intel_rdt: Add info files to Documentation
  x86/intel_rdt: Export the minimum number of set mask bits in sysfs
  x86/intel_rdt: Propagate error in rdt_mount() properly
  x86/intel_rdt: Add a missing #include
  MAINTAINERS: Add maintainer for Intel RDT resource allocation
  x86/intel_rdt: Add scheduler hook
  x86/intel_rdt: Add schemata file
  x86/intel_rdt: Add tasks files
  x86/intel_rdt: Add cpus file
  x86/intel_rdt: Add mkdir to resctrl file system
  x86/intel_rdt: Add "info" files to resctrl file system
  ...
2016-12-22 09:25:45 -08:00