Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise we fail on virtual machines with no support for specific HW
events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171009130712.14747-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We started to use group read whenever it's possible:
82bf311e15 perf stat: Use group read for event groups
That breaks some of attr tests, this change adds the new possible
read_format value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170928160633.GA26973@krava
Link: http://lkml.kernel.org/n/tip-1ko2zc4nph93d8lfwjyk9ivz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The proc files which is sorted with alphabetical order are evenly
assigned to several synthesize threads to be processed in parallel.
For 'perf top', the threads number hard code to online CPU number. The
following patch will introduce an option to set it.
For other perf tools, the thread number is 1. Because the process
function is not ready for multithreading, e.g.
process_synthesized_event.
This patch series only support event synthesize multithreading for 'perf
top'. For other tools, it can be done separately later.
With multithread applied, the total processing time can get up to 1.56x
speedup on Knights Mill for 'perf top'.
For specific single event processing, the processing time could increase
because of the lock contention. So proc_map_timeout may need to be
increased. Otherwise some proc maps will be truncated.
Based on my test, increasing the proc_map_timeout has small impact
on the total processing time. The total processing time still get 1.49x
speedup on Knights Mill after increasing the proc_map_timeout.
The patch itself doesn't increase the proc_map_timeout.
Doesn't need to implement multithreading for per task monitoring,
perf_event__synthesize_thread_map. It doesn't have performance issue.
Committer testing:
# getconf _NPROCESSORS_ONLN
4
# perf trace --no-inherit -e clone -o /tmp/output perf top
# tail -4 /tmp/bla
0.124 ( 0.041 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eb3a8f30, parent_tidptr: 0x7fc3eb3a99d0, child_tidptr: 0x7fc3eb3a99d0, tls: 0x7fc3eb3a9700) = 9548 (perf)
0.246 ( 0.023 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eaba7f30, parent_tidptr: 0x7fc3eaba89d0, child_tidptr: 0x7fc3eaba89d0, tls: 0x7fc3eaba8700) = 9549 (perf)
0.286 ( 0.019 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9550 (perf)
246.540 ( 0.047 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9551 (perf)
#
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command perf test -v 16 (Setup struct perf_event_attr test) always
reports success even if the test case fails. It works correctly if you
also specify -F (for don't fork).
root@s35lp76 perf]# ./perf test -v 16
15: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-record-no-delay'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data
(1 samples) ]
expected task=0, got 1
expected precise_ip=0, got 3
expected wakeup_events=1, got 0
FAILED './tests/attr/test-record-no-delay' - match failure
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
The reason for the wrong error reporting is the return value of the
system() library call. It is called in run_dir() file tests/attr.c and
returns the exit status, in above case 0xff00.
This value is given as parameter to the exit() function which can only
handle values 0-0xff.
The child process terminates with exit value of 0 and the parent does
not detect any error.
This patch corrects the error reporting and prints the correct test
result.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-rdube6rfcjsr1nzue72c7lqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d78ada4a76 ("perf tests attr: Do not store failed events") does
not create an event file in the /tmp directory when the
perf_open_event() system call failed.
This can lead to a situation where not /tmp/event-xx-yy-zz result file
exists at all (for example on a s390x virtual machine environment) where
no CPUMF hardware is available.
The following command then fails with a python call back chain instead
of printing failure:
[root@s8360046 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -v -ttest-stat-basic
running './tests/attr//test-stat-basic'
Traceback (most recent call last):
File "./tests/attr.py", line 379, in <module>
main()
File "./tests/attr.py", line 370, in main
run_tests(options)
File "./tests/attr.py", line 311, in run_tests
Test(f, options).run()
File "./tests/attr.py", line 300, in run
self.compare(self.expect, self.result)
File "./tests/attr.py", line 248, in compare
exp_event.diff(res_event)
UnboundLocalError: local variable 'res_event' referenced before assignment
[root@s8360046 perf]#
This patch catches this pitfall and prints an error message instead:
[root@s8360047 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -vvv -ttest-stat-basic
running './tests/attr//test-stat-basic'
loading expected events
Event event:base-stat
fd = 1
group_fd = -1
flags = 0|8
[....]
sample_regs_user = 0
sample_stack_user = 0
'PERF_TEST_ATTR=/tmp/tmpJbMQMP ./perf stat -o /tmp/tmpJbMQMP/perf.data -e cycles kill >/dev/null 2>&1' ret '1', expected '1'
loading result events
compare
matching [event:base-stat]
match: [event:base-stat] matches []
res_event is empty
FAILED './tests/attr//test-stat-basic' - match failure
[root@s8360047 perf]#
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-04d63nn7svfgxdhi60gq2mlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event_attr::task is 1 by default for first (tracking) event in
the session. Setting task=1 as default and adding task=0 for cases that
need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no usage outside util.c and this is the only remaining reason
for fcntl.h to be included in util.h, to get the loff_t definition in
Alpine Linux, so make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2dzlsao7k6ihozs5karw6kpx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross compiling perf and I want to link against a self-compiled
libunwind, I usually make the custom path where the libunwind headers
exist visible by adding the libunwind prefix to the include path when
compiling perf, i.e.:
~~~~~
$ ls $HOME/projects/compiled/other/include/
libunwind-coredump.h libunwind.h libunwind-x86_64.h
libunwind-common.h libunwind-dynamic.h libunwind-ptrace.h
unwind.h
$ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/
~~~~~~
Note the `unwind.h` header from libunwind which leads to compile
errors when compiling tests/dwarf-unwind.c, since it shadows perf's
util/unwind.h:
~~~~~
tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
static int unwind_entry(struct unwind_entry *entry, void *arg)
^~~~~~~~~~~~
tests/dwarf-unwind.c: In function ‘unwind_entry’:
tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’
char *symbol = entry->sym ? entry->sym->name : NULL;
^~
tests/dwarf-unwind.c: In function ‘unwind_thread’:
tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration]
err = unwind__get_entries(unwind_entry, &cnt, thread,
^~~~~~~~~~~~~~~~~~~
unwind_entry
tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs]
~~~~~~
Fix this compile error by specificing an explicit include of perf's
unwind.h in the util folder.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_PHYS_ADDR.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-6-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'Object code reading' test always fails on powerpc guest. Two reasons
for the failure are:
1. When elf section is too big (size beyond 'unsigned int' max value).
objdump fails to disassemble from such section. This was fixed with
commit 0f6329bd7fc ("binutils/objdump: Fix disassemble for huge elf
sections") in binutils.
2. When the sample is from hypervisor. Hypervisor symbols can not be
resolved within guest and thus thread__find_addr_map() fails for such
symbols. Fix this by ignoring hypervisor symbols in the test.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1504170896-7876-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to perf test to test data source printing.
v2: Make the tests actually checked for the correct name of Forward
v3: Adjust to new encoding
Committer notes:
Avoid the in place declaration to make this build with older compilers,
for instance, in Debian 7 we get:
tests/mem.c: In function 'test__mem':
tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers]
tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers]
So just zero a struct, then go on building the unions as needed,
reusing settings from the previous test, i.e. local -> remote, etc.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the expression parser for more complex metric formulas.
- Support python style IF ELSE operators
- Add an #SMT_On magic variable for formulas that depend on the SMT
status.
Example: 4 *( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles
- Support MIN/MAX operations
Example: min(1 , IDQ.MITE_UOPS / ( UPI * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )
This is useful to fix up problems caused by multiplexing.
- Support | & ^ operators
- Minor cleanups and fixes
- Support an \ escape for operators. This allows to specify event names
like c2-residency
- Support @ as an alternative for / to be able to specify pmus without
conflicts with operators (like msr/tsc/ as msr@tsc@)
Example: (cstate_core@c3\\-residency@ / msr@tsc@) * 100
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix buffer overflow for:
% perf stat -e msr/tsc/,cstate_core/c7-residency/ true
that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:
=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)
0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.
v2:
Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.
The actual perf event reading still uses the original values from the
evsel list.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling them just "data" is too vague, call it 'perf_state', to make it
clearer, for instance, when looking at patch hunks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it from 'parse_events_evlist' to 'parse_events_state' to better
state that this is parsing state that has to be passed around.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/n/tip-ji5mhn3iilgch3eaay6csr6z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf's BPF prologue generator unconditionally fetches 8 bytes for
function parameters, which causes problems on big endian machines. Thomas
gives a detailed analysis for this problem:
http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com
---- 8< ----
I investigated perf test BPF for s390x and have a question regarding
the 38.3 subtest (bpf-prologue test) which fails on s390x.
When I turn on trace_printk in tests/bpf-script-test-prologue.c
I see this output in /sys/kernel/debug/tracing/trace:
[root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace
perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0
perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0
[...]
There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c
accesses: f_mode (member of struct file at offset 140) offset and orig. They
are parameters of the lseek() system call triggered in this test case in
function llseek_loop().
What is really strange is the value of f_mode. It is an 8 byte value, whereas
in the probe event it is defined as a 4 byte value. The lower 4 bytes are all
zero and do not belong to member f_mode. The correct value should be 2001d for
read-only and 6001f for read-write open mode.
Here is the output of the 'perf test -vv bpf' trace:
Try to find probe point from debuginfo.
Matched function: null_lseek [2d9310d]
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Opening /sys/kernel/debug/tracing//README write=0
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32
---- 8< ----
This patch parses the type of each argument and converts data from memory to
expected type.
Now the test runs successfully on 4.13.0-rc5:
[root@s8360046 perf]# ./perf test bpf
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
[root@s8360046 perf]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If that is the case, or if the required lib is not present, e.g.
elfutils-devel in Fedora systems, then just skip the tests requiring
DWARF analysis.
Before:
# rpm -e elfutils-devel
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : FAILED!
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: FAILED!
63: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Skip
62: Check open filename arg using perf trace + vfs_getname: Skip
63: Add vfs_getname probe to get syscall args filenames : Skip
#
Then, reinstalling elfutils-devel, rebuilding the tool and running
again:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d67tvn401fxrwr97pu5ihfb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a library function that checks if 'perf probe' is built into the
tool being tested, skipping tests that need it.
Testing it on a system after removing the library needed to build
'probe' as a perf subcommand:
# perf test ping vfs_getname
59: Use vfs_getname probe to get syscall args filenames : Skip
60: probe libc's inet_pton & backtrace it with ping : Skip
61: Check open filename arg using perf trace + vfs_getname: Skip
62: Add vfs_getname probe to get syscall args filenames : Skip
# perf probe
perf: 'probe' is not a perf-command. See 'perf --help'.
#
Now reinstalling elfutils-libelf-devel on this Fedora 26 system to
rebuild perf and then retest this:
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ctdck2gzsskqhjzu3ebb62zm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3zxjswdbs2au3ih0rino0iy1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Installs a probe on libc's inet_pton function, that will use uprobes,
then use 'perf trace' on a ping to localhost asking for just one packet
with the a backtrace 3 levels deep, check that it is what we expect.
This needs no debuginfo package, all is done using the libc ELF symtab
and the CFI info in the binaries.
Testing it:
# perf test ping
61: probe libc's inet_pton & backtrace it with ping : Ok
In verbose mode:
# perf test -v ping
61: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1007
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7f75fce12a20))
__GI___inet_pton (/usr/lib64/libc-2.24.so)
getaddrinfo (/usr/lib64/libc-2.24.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-idrntt4nbg15aafu8hjmv7sk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.
Testing it:
# perf test "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname: Ok
#
# perf test -v "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 30846
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.
Using it:
# perf test "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames: Ok
# perf test -v "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 16414
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
Recording open file:
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
Looking at perf.data file for vfs_getname records for the file we touched:
touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
test child finished with 0
---- end ----
Use vfs_getname probe to get syscall args filenames: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First perf shell test:
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Ok
#
In verbose mode:
# perf test -v vfs_getname
60: Add vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 19146
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
test child finished with 0
---- end ----
Add vfs_getname probe to get syscall args filenames: Ok
#
And if the vmlinux file is not found:
# mv ../build/v4.12.0-rc6+/vmlinux ../build/v4.12.0-rc6+/vmlinux.hidden
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8f3n22c1yn516ev30s603ow2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v95tqqzuwawsmds3zn2mosje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow testing by directly using perf tools in scripts, checking that
the effects on the system are the ones expected and that the output
produced is as well the desired one.
For instance, adding a probe at a well known location with 'perf probe',
then checking that the results from using that probe to record are the
desired ones, etc.
The next csets will introduce tests using this new testing
infrastructure.
The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we'll be able to pass more test specific parameters without
having to change this function signature.
Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
1: Synthesize thread map
2: Synthesize cpu map
3: Synthesize stat config
4: Synthesize stat
5: Synthesize stat round
6: Synthesize attr update
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pjhuhkphs7o3tkbqrukfv6bz@git.kernel.org
Fixes: e8210cefb7 ("perf tests: Introduce iterator function for tests")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the stat events are quite rare to find on common machines (like
front end cycles).
Adding an 'optional' term to mark such events in attr tests. Event
marked as optional will not fail the test case if it's not found in
results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>From following commit:
commit 4979d0c7d0 ("perf stat record: Add record command")
we started to assign PERF_SAMPLE_IDENTIFIER to sample_type.
Fixing the attr stat tests accordingly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have a test to detect to highest precise possible, so test can't just
predict precise_ip value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The final period can differ from what user specifies on command line due
to the perf_event_max_sample_rate sysctl setup.
Thus we can't predixt the sample_period value any more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat command creates all events disabled and enables them either
manualy or via the enable_on_exec bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The record command now properly returns the status of the tracee if
there's any. We need to properly set the expected return value of the
tracee in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
removed '-D' option and renamed --no-delay into --no-buffering.
Fixing that in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
Link: http://lkml.kernel.org/r/20170703145030.12903-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 5c0cf22477 ("perf record: Store data mmaps for dwarf unwind")
have enabled address sampling for dwarf unwind, we need to reflect that
in this test by adding ADDR sample_type and enabling mmap_data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an event open fallback which set exclude_kernel=1 in case use
does not have enough privileges. Adding both 0|1 for this attribute,
because we don't know what value it is.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data_equal name fits better to the return value of the function.
It's true when the data is equal.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making compare_data global, so it could be used outside
the Test class scope to compare command results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create many test events before the real ones just to test specific
features. But there's no way for attr tests to separate those test
events from those it needs to check.
Adding 'ready' call from the events open interface to trigger/start
events collection for attr test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not mess up our temp space with files we don't
need - failed event open attempts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can return NULL, in which case we should bail out and remove the
directory created with mkdtemp(), which is stored in the "__tempdir"
variable, not in "tempdir".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8e5dc84835 ("perf test: Add a test case for SDT event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
