Move management of the file->f_security blob out of the
individual security modules and into the infrastructure.
The modules no longer allocate or free the data, instead
they tell the infrastructure how much space they require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Move management of the cred security blob out of the
security modules and into the security infrastructre.
Instead of allocating and freeing space the security
modules tell the infrastructure how much space they
require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Back in 2007 I made what turned out to be a rather serious
mistake in the implementation of the Smack security module.
The SELinux module used an interface in /proc to manipulate
the security context on processes. Rather than use a similar
interface, I used the same interface. The AppArmor team did
likewise. Now /proc/.../attr/current will tell you the
security "context" of the process, but it will be different
depending on the security module you're using.
This patch provides a subdirectory in /proc/.../attr for
Smack. Smack user space can use the "current" file in
this subdirectory and never have to worry about getting
SELinux attributes by mistake. Programs that use the
old interface will continue to work (or fail, as the case
may be) as before.
The proposed S.A.R.A security module is dependent on
the mechanism to create its own attr subdirectory.
The original implementation is by Kees Cook.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This converts capabilities to use the new LSM_ORDER_FIRST position.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
In preparation for distinguishing the "capability" LSM from other LSMs, it
must be ordered first. This introduces LSM_ORDER_MUTABLE for the general
LSMs and LSM_ORDER_FIRST for capability. In the future LSM_ORDER_LAST
for could be added for anything that must run last (e.g. Landlock may
use this).
Signed-off-by: Kees Cook <keescook@chromium.org>
This converts Yama from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
This converts LoadPin from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Since we already have to do a pass through the LSMs to figure out if
exclusive LSMs should be disabled after the first one is seen as enabled,
this splits the logic up a bit more cleanly. Now we do a full "prepare"
pass through the LSMs (which also allows for later use by the blob-sharing
code), before starting the LSM initialization pass.
Signed-off-by: Kees Cook <keescook@chromium.org>
This removes CONFIG_DEFAULT_SECURITY in favor of the explicit ordering
offered by CONFIG_LSM and adds all the exclusive LSMs to the ordered
LSM initialization. The old meaning of CONFIG_DEFAULT_SECURITY is now
captured by which exclusive LSM is listed first in the LSM order. All
LSMs not added to the ordered list are explicitly disabled.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
In order to both support old "security=" Legacy Major LSM selection, and
handling real exclusivity, this creates LSM_FLAG_EXCLUSIVE and updates
the selection logic to handle them.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
For what are marked as the Legacy Major LSMs, make them effectively
exclusive when selected on the "security=" boot parameter, to handle
the future case of when a previously major LSMs become non-exclusive
(e.g. when TOMOYO starts blob-sharing).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
This moves the string handling for "security=" boot parameter into
a stored pointer instead of a string duplicate. This will allow
easier handling of the string when switching logic to use the coming
enable/disable infrastructure.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Until now, any LSM without an enable storage variable was considered
enabled. This inverts the logic and sets defaults to true only if the
LSM gets added to the ordered initialization list. (And an exception
continues for the major LSMs until they are integrated into the ordered
initialization in a later patch.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Provide a way to explicitly choose LSM initialization order via the new
"lsm=" comma-separated list of LSMs.
Signed-off-by: Kees Cook <keescook@chromium.org>
This provides a way to declare LSM initialization order via the new
CONFIG_LSM. Currently only non-major LSMs are recognized. This will
be expanded in future patches.
Signed-off-by: Kees Cook <keescook@chromium.org>
This constructs an ordered list of LSMs to initialize, using a hard-coded
list of only "integrity": minor LSMs continue to have direct hook calls,
and major LSMs continue to initialize separately.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
As a prerequisite to adjusting LSM selection logic in the future, this
moves the selection logic up out of the individual major LSMs, making
their init functions only run when actually enabled. This considers all
LSMs enabled by default unless they specified an external "enable"
variable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
This provides a place for ordered LSMs to be initialized, separate from
the "major" LSMs. This is mainly a copy/paste from major_lsm_init() to
ordered_lsm_init(), but it will change drastically in later patches.
What is not obvious in the patch is that this change moves the integrity
LSM from major_lsm_init() into ordered_lsm_init(), since it is not marked
with the LSM_FLAG_LEGACY_MAJOR. As it is the only LSM in the "ordered"
list, there is no reordering yet created.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Pull vfs mount API prep from Al Viro:
"Mount API prereqs.
Mostly that's LSM mount options cleanups. There are several minor
fixes in there, but nothing earth-shattering (leaks on failure exits,
mostly)"
* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
smack: rewrite smack_sb_eat_lsm_opts()
smack: get rid of match_token()
smack: take the guts of smack_parse_opts_str() into a new helper
LSM: new method: ->sb_add_mnt_opt()
selinux: rewrite selinux_sb_eat_lsm_opts()
selinux: regularize Opt_... names a bit
selinux: switch away from match_token()
selinux: new helper - selinux_add_opt()
LSM: bury struct security_mnt_opts
smack: switch to private smack_mnt_opts
selinux: switch to private struct selinux_mnt_opts
LSM: hide struct security_mnt_opts from any generic code
selinux: kill selinux_sb_get_mnt_opts()
LSM: turn sb_eat_lsm_opts() into a method
nfs_remount(): don't leak, don't ignore LSM options quietly
btrfs: sanitize security_mnt_opts use
selinux; don't open-code a loop in sb_finish_set_opts()
LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
new helper: security_sb_eat_lsm_opts()
...
Adding options to growing mnt_opts. NFS kludge with passing
context= down into non-text-options mount switched to it, and
with that the last use of ->sb_parse_opts_str() is gone.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Keep void * instead, allocate on demand (in parse_str_opts, at the
moment). Eventually both selinux and smack will be better off
with private structures with several strings in those, rather than
this "counter and two pointers to dynamically allocated arrays"
ugliness. This commit allows to do that at leisure, without
disrupting anything outside of given module.
Changes:
* instead of struct security_mnt_opt use an opaque pointer
initialized to NULL.
* security_sb_eat_lsm_opts(), security_sb_parse_opts_str() and
security_free_mnt_opts() take it as var argument (i.e. as void **);
call sites are unchanged.
* security_sb_set_mnt_opts() and security_sb_remount() take
it by value (i.e. as void *).
* new method: ->sb_free_mnt_opts(). Takes void *, does
whatever freeing that needs to be done.
* ->sb_set_mnt_opts() and ->sb_remount() might get NULL as
mnt_opts argument, meaning "empty".
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kill ->sb_copy_data() - it's used only in combination with immediately
following ->sb_parse_opts_str(). Turn that combination into a new
method.
This is just a mechanical move - cleanups will be the next step.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) keeping a copy in btrfs_fs_info is completely pointless - we never
use it for anything. Getting rid of that allows for simpler calling
conventions for setup_security_options() (caller is responsible for
freeing mnt_opts in all cases).
2) on remount we want to use ->sb_remount(), not ->sb_set_mnt_opts(),
same as we would if not for FS_BINARY_MOUNTDATA. Behaviours *are*
close (in fact, selinux sb_set_mnt_opts() ought to punt to
sb_remount() in "already initialized" case), but let's handle
that uniformly. And the only reason why the original btrfs changes
didn't go for security_sb_remount() in btrfs_remount() case is that
it hadn't been exported. Let's export it for a while - it'll be
going away soon anyway.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... leaving the "is it kernel-internal" logics in the caller.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
combination of alloc_secdata(), security_sb_copy_data(),
security_sb_parse_opt_str() and free_secdata().
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
LSM initialization failures have traditionally been ignored. We should
at least WARN when something goes wrong.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Booting with "lsm.debug" will report future details on how LSM ordering
decisions are being made.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
In preparation for doing more interesting LSM init probing, this converts
the existing initcall system into an explicit call into a function pointer
from a section-collected struct lsm_info array.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
This partially reverts commit 58eacfffc4 ("init, tracing: instrument
security and console initcall trace events") since security init calls
are about to no longer resemble regular init calls.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
In preparation for switching from initcall to just a regular set of
pointers in a section, rename the internal section name.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
For a while now, the LSM core has said it was "initializED", rather than
"initializING". This adjust the report to be more accurate (i.e. before
this was reported before any LSMs had been initialized.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Allow the initcall tables to be emitted using relative references that
are only half the size on 64-bit architectures and don't require fixups
at runtime on relocatable kernels.
Link: http://lkml.kernel.org/r/20180704083651.24360-5-ard.biesheuvel@linaro.org
Acked-by: James Morris <james.morris@microsoft.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull integrity updates from James Morris:
"This adds support for EVM signatures based on larger digests, contains
a new audit record AUDIT_INTEGRITY_POLICY_RULE to differentiate the
IMA policy rules from the IMA-audit messages, addresses two deadlocks
due to either loading or searching for crypto algorithms, and cleans
up the audit messages"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
EVM: fix return value check in evm_write_xattrs()
integrity: prevent deadlock during digsig verification.
evm: Allow non-SHA1 digital signatures
evm: Don't deadlock if a crypto algorithm is unavailable
integrity: silence warning when CONFIG_SECURITYFS is not enabled
ima: Differentiate auditing policy rules from "audit" actions
ima: Do not audit if CONFIG_INTEGRITY_AUDIT is not set
ima: Use audit_log_format() rather than audit_log_string()
ima: Call audit_log_string() rather than logging it untrusted
Pull security subsystem updates from James Morris:
- kstrdup() return value fix from Eric Biggers
- Add new security_load_data hook to differentiate security checking of
kernel-loaded binaries in the case of there being no associated file
descriptor, from Mimi Zohar.
- Add ability to IMA to specify a policy at build-time, rather than
just via command line params or by loading a custom policy, from
Mimi.
- Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
using signed firmware), from Mimi.
- Allow IMA to deny loading of kexec kernel images, as they cannot be
measured by IMA, from Mimi.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: check for kstrdup() failure in lsm_append()
security: export security_kernel_load_data function
ima: based on policy warn about loading firmware (pre-allocated buffer)
module: replace the existing LSM hook in init_module
ima: add build time policy
ima: based on policy require signed firmware (sysfs fallback)
firmware: add call to LSM hook before firmware sysfs fallback
ima: based on policy require signed kexec kernel images
kexec: add call to LSM hook in original kexec_load syscall
security: define new LSM hook named security_kernel_load_data
MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry
This patch aimed to prevent deadlock during digsig verification.The point
of issue - user space utility modprobe and/or it's dependencies (ld-*.so,
libz.so.*, libc-*.so and /lib/modules/ files) that could be used for
kernel modules load during digsig verification and could be signed by
digsig in the same time.
First at all, look at crypto_alloc_tfm() work algorithm:
crypto_alloc_tfm() will first attempt to locate an already loaded
algorithm. If that fails and the kernel supports dynamically loadable
modules, it will then attempt to load a module of the same name or alias.
If that fails it will send a query to any loaded crypto manager to
construct an algorithm on the fly.
We have situation, when public_key_verify_signature() in case of RSA
algorithm use alg_name to store internal information in order to construct
an algorithm on the fly, but crypto_larval_lookup() will try to use
alg_name in order to load kernel module with same name.
1) we can't do anything with crypto module work, since it designed to work
exactly in this way;
2) we can't globally filter module requests for modprobe, since it
designed to work with any requests.
In this patch, I propose add an exception for "crypto-pkcs1pad(rsa,*)"
module requests only in case of enabled integrity asymmetric keys support.
Since we don't have any real "crypto-pkcs1pad(rsa,*)" kernel modules for
sure, we are safe to fail such module request from crypto_larval_lookup().
In this way we prevent modprobe execution during digsig verification and
avoid possible deadlock if modprobe and/or it's dependencies also signed
with digsig.
Requested "crypto-pkcs1pad(rsa,*)" kernel module name formed by:
1) "pkcs1pad(rsa,%s)" in public_key_verify_signature();
2) "crypto-%s" / "crypto-%s-all" in crypto_larval_lookup().
"crypto-pkcs1pad(rsa," part of request is a constant and unique and could
be used as filter.
Signed-off-by: Mikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
include/linux/integrity.h | 13 +++++++++++++
security/integrity/digsig_asymmetric.c | 23 +++++++++++++++++++++++
security/security.c | 7 ++++++-
3 files changed, 42 insertions(+), 1 deletion(-)
The firmware_loader can be built as a loadable module, which now
fails when CONFIG_SECURITY is enabled, because a call to the
security_kernel_load_data() function got added, and this is
not exported to modules:
ERROR: "security_kernel_load_data" [drivers/base/firmware_loader/firmware_class.ko] undefined!
Add an EXPORT_SYMBOL_GPL() to make it available here.
Fixes: 6e852651f2 ("firmware: add call to LSM hook before firmware sysfs fallback")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Morris <james.morris@microsoft.com>
The original kexec_load syscall can not verify file signatures, nor can
the kexec image be measured. Based on policy, deny the kexec_load
syscall.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Differentiate between the kernel reading a file specified by userspace
from the kernel loading a buffer containing data provided by userspace.
This patch defines a new LSM hook named security_kernel_load_data().
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Right now the LSM labels for socketpairs are always uninitialized,
since there is no security hook for the socketpair() syscall. This
patch adds the required hooks so LSMs can properly label socketpairs.
This allows SO_PEERSEC to return useful information on those sockets.
Note that the behavior of socketpair() can be emulated by creating a
listener socket, connecting to it, and then discarding the initial
listener socket. With this workaround, SO_PEERSEC would return the
caller's security context. However, with socketpair(), the uninitialized
context is returned unconditionally. This is unexpected and makes
socketpair() less useful in situations where the security context is
crucial to the application.
With the new socketpair-hook this disparity can be solved by making
socketpair() return the expected security context.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
- Tom Zanussi's extended histogram work
This adds the synthetic events to have histograms from multiple event data
Adds triggers "onmatch" and "onmax" to call the synthetic events
Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with them)
And other various fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iQHIBAABCgAyFiEEPm6V/WuN2kyArTUe1a05Y9njSUkFAlrLoCAUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQ1a05Y9njSUks/QwAn/ky8WgfjcRdjKmBYuEwDedvm9iI
V9G5kpv5JMw5dLz4l1pS3tA3M9Lyuc5z3Shw92FTy36vdU1wxEjQgHa7viB1xk9x
KsiTyNjTsgrRd7GVHMy/8Be2RRiTRLaXKAsLCoj/c7QWzagV1P8XWlWK5mojYkh/
DrSXyg9Avkp30+sU1bvcLWnmmZUFqMxs+bWipD9uFc98USMMyeP25nrnhrj0gDTg
Q93cjXUuyVRC4lJ2YTW0GCSKhMKEw5f/ltEOT1hwScqYkCJj1EubKqS53R/9h21z
IPUrYcqLnMRu0j2ejR+UAy5Vsy3gJUrPMQb0F6hlu1DwbMd0d/9SGh1c+Sm+zorh
yftWTdCZsYrXkaOuB6V5M30X+KBwbWO0Xc9VCvgJ/IU5vMlgLSt5itTWbT/Fmfhb
ll5/RXP7zhSXRv5sdl/BP3/4dd6F8jpyKyaR2Rk2+XjBOGIq5mvqNGr4Vj9AzxW8
E0nvq7l7e0dbxZNM42gEm3cht1VUg7Zz0Y0+
=91oN
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
Pull integrity updates from James Morris:
"A mixture of bug fixes, code cleanup, and continues to close
IMA-measurement, IMA-appraisal, and IMA-audit gaps.
Also note the addition of a new cred_getsecid LSM hook by Matthew
Garrett:
For IMA purposes, we want to be able to obtain the prepared secid
in the bprm structure before the credentials are committed. Add a
cred_getsecid hook that makes this possible.
which is used by a new CREDS_CHECK target in IMA:
In ima_bprm_check(), check with both the existing process
credentials and the credentials that will be committed when the new
process is started. This will not change behaviour unless the
system policy is extended to include CREDS_CHECK targets -
BPRM_CHECK will continue to check the same credentials that it did
previously"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Fallback to the builtin hash algorithm
ima: Add smackfs to the default appraise/measure list
evm: check for remount ro in progress before writing
ima: Improvements in ima_appraise_measurement()
ima: Simplify ima_eventsig_init()
integrity: Remove unused macro IMA_ACTION_RULE_FLAGS
ima: drop vla in ima_audit_measurement()
ima: Fix Kconfig to select TPM 2.0 CRB interface
evm: Constify *integrity_status_msg[]
evm: Move evm_hmac and evm_hash from evm_main.c to evm_crypto.c
fuse: define the filesystem as untrusted
ima: fail signature verification based on policy
ima: clear IMA_HASH
ima: re-evaluate files on privileged mounted filesystems
ima: fail file signature verification on non-init mounted filesystems
IMA: Support using new creds in appraisal policy
security: Add a cred_getsecid hook
Pull general security layer updates from James Morris:
- Convert security hooks from list to hlist, a nice cleanup, saving
about 50% of space, from Sargun Dhillon.
- Only pass the cred, not the secid, to kill_pid_info_as_cred and
security_task_kill (as the secid can be determined from the cred),
from Stephen Smalley.
- Close a potential race in kernel_read_file(), by making the file
unwritable before calling the LSM check (vs after), from Kees Cook.
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: convert security hooks to use hlist
exec: Set file unwritable before LSM check
usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
