/* * pata_qdi.c - QDI VLB ATA controllers * (C) 2006 Red Hat <alan@redhat.com> * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly * useful. * * Tuning code written from the documentation at * http://www.ryston.cz/petr/vlb/qd6500.html * http://www.ryston.cz/petr/vlb/qd6580.html * * Probe code based on drivers/ide/legacy/qd65xx.c * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by * Samuel Thibault <samuel.thibault@fnac.net> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #include <linux/platform_device.h> #define DRV_NAME "pata_qdi" #define DRV_VERSION "0.3.1" #define NR_HOST 4 /* Two 6580s */ struct qdi_data { unsigned long timing; u8 clock[2]; u8 last; int fast; struct platform_device *platform_dev; }; static struct ata_host *qdi_host[NR_HOST]; static struct qdi_data qdi_data[NR_HOST]; static int nr_qdi_host; #ifdef MODULE static int probe_qdi = 1; #else static int probe_qdi; #endif static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct qdi_data *qdi = ap->host->private_data; int active, recovery; u8 timing; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (qdi->fast) { active = 8 - FIT(t.active, 1, 8); recovery = 18 - FIT(t.recover, 3, 18); } else { active = 9 - FIT(t.active, 2, 9); recovery = 15 - FIT(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; qdi->clock[adev->devno] = timing; outb(timing, qdi->timing); } static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct qdi_data *qdi = ap->host->private_data; int active, recovery; u8 timing; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (qdi->fast) { active = 8 - FIT(t.active, 1, 8); recovery = 18 - FIT(t.recover, 3, 18); } else { active = 9 - FIT(t.active, 2, 9); recovery = 15 - FIT(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; qdi->clock[adev->devno] = timing; outb(timing, qdi->timing); /* Clear the FIFO */ if (adev->class != ATA_DEV_ATA) outb(0x5F, (qdi->timing & 0xFFF0) + 3); } /** * qdi_qc_issue_prot - command issue * @qc: command pending * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings. */ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct qdi_data *qdi = ap->host->private_data; if (qdi->clock[adev->devno] != qdi->last) { if (adev->pio_mode) { qdi->last = qdi->clock[adev->devno]; outb(qdi->clock[adev->devno], qdi->timing); } } return ata_qc_issue_prot(qc); } static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->link->ap; int slop = buflen & 3; if (ata_id_has_dword_io(adev->id)) { if (write_data) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { __le32 pad = 0; if (write_data) { memcpy(&pad, buf + buflen - slop, slop); iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } else { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); } } } else ata_data_xfer(adev, buf, buflen, write_data); } static struct scsi_host_template qdi_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; static struct ata_port_operations qdi6500_port_ops = { .set_piomode = qdi6500_set_piomode, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_40wire, .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, .data_xfer = qdi_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .port_start = ata_sff_port_start, }; static struct ata_port_operations qdi6580_port_ops = { .set_piomode = qdi6580_set_piomode, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_40wire, .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, .data_xfer = qdi_data_xfer, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .port_start = ata_sff_port_start, }; /** * qdi_init_one - attach a qdi interface * @type: Type to display * @io: I/O port start * @irq: interrupt line * @fast: True if on a > 33Mhz VLB * * Register an ISA bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. */ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { unsigned long ctl = io + 0x206; struct platform_device *pdev; struct ata_host *host; struct ata_port *ap; void __iomem *io_addr, *ctl_addr; int ret; /* * Fill in a probe structure first of all */ pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io, 8); ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); if (!io_addr || !ctl_addr) goto fail; ret = -ENOMEM; host = ata_host_alloc(&pdev->dev, 1); if (!host) goto fail; ap = host->ports[0]; if (type == 6580) { ap->ops = &qdi6580_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; } else { ap->ops = &qdi6500_port_ops; ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; } ap->ioaddr.cmd_addr = io_addr; ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); /* * Hook in a private data structure per channel */ ap->private_data = &qdi_data[nr_qdi_host]; qdi_data[nr_qdi_host].timing = port; qdi_data[nr_qdi_host].fast = fast; qdi_data[nr_qdi_host].platform_dev = pdev; printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); /* activate */ ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht); if (ret) goto fail; qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); return 0; fail: platform_device_unregister(pdev); return ret; } /** * qdi_init - attach qdi interfaces * * Attach qdi IDE interfaces by scanning the ports it may occupy. */ static __init int qdi_init(void) { unsigned long flags; static const unsigned long qd_port[2] = { 0x30, 0xB0 }; static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; static const int ide_irq[2] = { 14, 15 }; int ct = 0; int i; if (probe_qdi == 0) return -ENODEV; /* * Check each possible QD65xx base address */ for (i = 0; i < 2; i++) { unsigned long port = qd_port[i]; u8 r, res; if (request_region(port, 2, "pata_qdi")) { /* Check for a card */ local_irq_save(flags); r = inb_p(port); outb_p(0x19, port); res = inb_p(port); outb_p(r, port); local_irq_restore(flags); /* Fail */ if (res == 0x19) { release_region(port, 2); continue; } /* Passes the presence test */ r = inb_p(port + 1); /* Check port agrees with port set */ if ((r & 2) >> 1 != i) { release_region(port, 2); continue; } /* Check card type */ if ((r & 0xF0) == 0xC0) { /* QD6500: single channel */ if (r & 8) { /* Disabled ? */ release_region(port, 2); continue; } if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) ct++; } if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { /* QD6580: dual channel */ if (!request_region(port + 2 , 2, "pata_qdi")) { release_region(port, 2); continue; } res = inb(port + 3); if (res & 1) { /* Single channel mode */ if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0) ct++; } else { /* Dual channel mode */ if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0) ct++; if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0) ct++; } } } } if (ct != 0) return 0; return -ENODEV; } static __exit void qdi_exit(void) { int i; for (i = 0; i < nr_qdi_host; i++) { ata_host_detach(qdi_host[i]); /* Free the control resource. The 6580 dual channel has the resources * claimed as a pair of 2 byte resources so we need no special cases... */ release_region(qdi_data[i].timing, 2); platform_device_unregister(qdi_data[i].platform_dev); } } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for qdi ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); module_init(qdi_init); module_exit(qdi_exit); module_param(probe_qdi, int, 0);