/* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox <alan@redhat.com> * * Based on * * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 * * Copyright (C) 2003 ATI Inc. <hyu@ati.com> * Copyright (C) 2004 Bartlomiej Zolnierkiewicz * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "pata_atiixp" #define DRV_VERSION "0.4.6" enum { ATIIXP_IDE_PIO_TIMING = 0x40, ATIIXP_IDE_MWDMA_TIMING = 0x44, ATIIXP_IDE_PIO_CONTROL = 0x48, ATIIXP_IDE_PIO_MODE = 0x4a, ATIIXP_IDE_UDMA_CONTROL = 0x54, ATIIXP_IDE_UDMA_MODE = 0x56 }; static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline) { struct ata_port *ap = link->ap; static const struct pci_bits atiixp_enable_bits[] = { { 0x48, 1, 0x01, 0x00 }, { 0x48, 1, 0x08, 0x00 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) return -ENOENT; return ata_sff_prereset(link, deadline); } static int atiixp_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 udma; /* Hack from drivers/ide/pci. Really we want to know how to do the raw detection not play follow the bios mode guess */ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40) return ATA_CBL_PATA80; return ATA_CBL_PATA40; } /** * atiixp_set_pio_timing - set initial PIO mode data * @ap: ATA interface * @adev: ATA device * * Called by both the pio and dma setup functions to set the controller * timings for PIO transfers. We must load both the mode number and * timing values into the controller. */ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) { static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dn = 2 * ap->port_no + adev->devno; /* Check this is correct - the order is odd in both drivers */ int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); u16 pio_mode_data, pio_timing_data; pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); pio_mode_data &= ~(0x7 << (4 * dn)); pio_mode_data |= pio << (4 * dn); pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); pio_timing_data &= ~(0xFF << timing_shift); pio_timing_data |= (pio_timings[pio] << timing_shift); pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); } /** * atiixp_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device * * Called to do the PIO mode setup. We use a shared helper for this * as the DMA setup must also adjust the PIO timing information. */ static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) { atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); } /** * atiixp_set_dmamode - set initial DMA mode data * @ap: ATA interface * @adev: ATA device * * Called to do the DMA mode setup. We use timing tables for most * modes but must tune an appropriate PIO mode to match. */ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) { static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dma = adev->dma_mode; int dn = 2 * ap->port_no + adev->devno; int wanted_pio; if (adev->dma_mode >= XFER_UDMA_0) { u16 udma_mode_data; dma -= XFER_UDMA_0; pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); udma_mode_data &= ~(0x7 << (4 * dn)); udma_mode_data |= dma << (4 * dn); pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); } else { u16 mwdma_timing_data; /* Check this is correct - the order is odd in both drivers */ int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); dma -= XFER_MW_DMA_0; pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data); mwdma_timing_data &= ~(0xFF << timing_shift); mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data); } /* * We must now look at the PIO mode situation. We may need to * adjust the PIO mode to keep the timings acceptable */ if (adev->dma_mode >= XFER_MW_DMA_2) wanted_pio = 4; else if (adev->dma_mode == XFER_MW_DMA_1) wanted_pio = 3; else if (adev->dma_mode == XFER_MW_DMA_0) wanted_pio = 0; else BUG(); if (adev->pio_mode != wanted_pio) atiixp_set_pio_timing(ap, adev, wanted_pio); } /** * atiixp_bmdma_start - DMA start callback * @qc: Command in progress * * When DMA begins we need to ensure that the UDMA control * register for the channel is correctly set. * * Note: The host lock held by the libata layer protects * us from two channels both trying to set DMA bits at once */ static void atiixp_bmdma_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dn = (2 * ap->port_no) + adev->devno; u16 tmp16; pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); if (adev->dma_mode >= XFER_UDMA_0) tmp16 |= (1 << dn); else tmp16 &= ~(1 << dn); pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); ata_bmdma_start(qc); } /** * atiixp_dma_stop - DMA stop callback * @qc: Command in progress * * DMA has completed. Clear the UDMA flag as the next operations will * be PIO ones not UDMA data transfer. * * Note: The host lock held by the libata layer protects * us from two channels both trying to set DMA bits at once */ static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int dn = (2 * ap->port_no) + qc->dev->devno; u16 tmp16; pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); tmp16 &= ~(1 << dn); pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); ata_bmdma_stop(qc); } static struct scsi_host_template atiixp_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, }; static struct ata_port_operations atiixp_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_sff_dumb_qc_prep, .bmdma_start = atiixp_bmdma_start, .bmdma_stop = atiixp_bmdma_stop, .cable_detect = atiixp_cable_detect, .set_piomode = atiixp_set_piomode, .set_dmamode = atiixp_set_dmamode, .prereset = atiixp_pre_reset, }; static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x06, /* No MWDMA0 support */ .udma_mask = 0x3F, .port_ops = &atiixp_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL); } static const struct pci_device_id atiixp[] = { { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, { }, }; static struct pci_driver atiixp_pci_driver = { .name = DRV_NAME, .id_table = atiixp, .probe = atiixp_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .resume = ata_pci_device_resume, .suspend = ata_pci_device_suspend, #endif }; static int __init atiixp_init(void) { return pci_register_driver(&atiixp_pci_driver); } static void __exit atiixp_exit(void) { pci_unregister_driver(&atiixp_pci_driver); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, atiixp); MODULE_VERSION(DRV_VERSION); module_init(atiixp_init); module_exit(atiixp_exit);