/************************************************************************ * s2io.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC * Copyright(c) 2002-2005 Neterion Inc. * This software may be used and distributed according to the terms of * the GNU General Public License (GPL), incorporated herein by reference. * Drivers based on or derived from this code fall under the GPL and must * retain the authorship, copyright and license notice. This file is not * a complete program and may only be used when the entire operating * system is licensed under the GPL. * See the file COPYING in this distribution for more information. ************************************************************************/ #ifndef _S2IO_H #define _S2IO_H #define TBD 0 #define BIT(loc) (0x8000000000000000ULL >> (loc)) #define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz)) #define INV(d) ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff) #ifndef BOOL #define BOOL int #endif #ifndef TRUE #define TRUE 1 #define FALSE 0 #endif #undef SUCCESS #define SUCCESS 0 #define FAILURE -1 /* Maximum time to flicker LED when asked to identify NIC using ethtool */ #define MAX_FLICKER_TIME 60000 /* 60 Secs */ /* Maximum outstanding splits to be configured into xena. */ typedef enum xena_max_outstanding_splits { XENA_ONE_SPLIT_TRANSACTION = 0, XENA_TWO_SPLIT_TRANSACTION = 1, XENA_THREE_SPLIT_TRANSACTION = 2, XENA_FOUR_SPLIT_TRANSACTION = 3, XENA_EIGHT_SPLIT_TRANSACTION = 4, XENA_TWELVE_SPLIT_TRANSACTION = 5, XENA_SIXTEEN_SPLIT_TRANSACTION = 6, XENA_THIRTYTWO_SPLIT_TRANSACTION = 7 } xena_max_outstanding_splits; #define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4) /* OS concerned variables and constants */ #define WATCH_DOG_TIMEOUT 15*HZ #define EFILL 0x1234 #define ALIGN_SIZE 127 #define PCIX_COMMAND_REGISTER 0x62 /* * Debug related variables. */ /* different debug levels. */ #define ERR_DBG 0 #define INIT_DBG 1 #define INFO_DBG 2 #define TX_DBG 3 #define INTR_DBG 4 /* Global variable that defines the present debug level of the driver. */ int debug_level = ERR_DBG; /* Default level. */ /* DEBUG message print. */ #define DBG_PRINT(dbg_level, args...) if(!(debug_level> 16) & 0xFFFF) #define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF) u64 Control_2; #define THE_RXD_MARK 0x3 #define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2) #define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62) #ifndef CONFIG_2BUFF_MODE #define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14) #define SET_BUFFER0_SIZE(val) vBIT(val,2,14) #else #define MASK_BUFFER0_SIZE vBIT(0xFF,2,14) #define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16) #define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16) #define SET_BUFFER0_SIZE(val) vBIT(val,8,8) #define SET_BUFFER1_SIZE(val) vBIT(val,16,16) #define SET_BUFFER2_SIZE(val) vBIT(val,32,16) #endif #define MASK_VLAN_TAG vBIT(0xFFFF,48,16) #define SET_VLAN_TAG(val) vBIT(val,48,16) #define SET_NUM_TAG(val) vBIT(val,16,32) #ifndef CONFIG_2BUFF_MODE #define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14))) #else #define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \ >> 48) #define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \ >> 32) #define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \ >> 16) #define BUF0_LEN 40 #define BUF1_LEN 1 #endif u64 Buffer0_ptr; #ifdef CONFIG_2BUFF_MODE u64 Buffer1_ptr; u64 Buffer2_ptr; #endif } RxD_t; /* Structure that represents the Rx descriptor block which contains * 128 Rx descriptors. */ #ifndef CONFIG_2BUFF_MODE typedef struct _RxD_block { #define MAX_RXDS_PER_BLOCK 127 RxD_t rxd[MAX_RXDS_PER_BLOCK]; u64 reserved_0; #define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last * Rxd in this blk */ u64 reserved_2_pNext_RxD_block; /* Logical ptr to next */ u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch * the upper 32 bits should * be 0 */ } RxD_block_t; #else typedef struct _RxD_block { #define MAX_RXDS_PER_BLOCK 85 RxD_t rxd[MAX_RXDS_PER_BLOCK]; #define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd * in this blk */ u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */ } RxD_block_t; #define SIZE_OF_BLOCK 4096 /* Structure to hold virtual addresses of Buf0 and Buf1 in * 2buf mode. */ typedef struct bufAdd { void *ba_0_org; void *ba_1_org; void *ba_0; void *ba_1; } buffAdd_t; #endif /* Structure which stores all the MAC control parameters */ /* This structure stores the offset of the RxD in the ring * from which the Rx Interrupt processor can start picking * up the RxDs for processing. */ typedef struct _rx_curr_get_info_t { u32 block_index; u32 offset; u32 ring_len; } rx_curr_get_info_t; typedef rx_curr_get_info_t rx_curr_put_info_t; /* This structure stores the offset of the TxDl in the FIFO * from which the Tx Interrupt processor can start picking * up the TxDLs for send complete interrupt processing. */ typedef struct { u32 offset; u32 fifo_len; } tx_curr_get_info_t; typedef tx_curr_get_info_t tx_curr_put_info_t; /* Structure that holds the Phy and virt addresses of the Blocks */ typedef struct rx_block_info { RxD_t *block_virt_addr; dma_addr_t block_dma_addr; } rx_block_info_t; /* pre declaration of the nic structure */ typedef struct s2io_nic nic_t; /* Ring specific structure */ typedef struct ring_info { /* The ring number */ int ring_no; /* * Place holders for the virtual and physical addresses of * all the Rx Blocks */ rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING]; int block_count; int pkt_cnt; /* * Put pointer info which indictes which RxD has to be replenished * with a new buffer. */ rx_curr_put_info_t rx_curr_put_info; /* * Get pointer info which indictes which is the last RxD that was * processed by the driver. */ rx_curr_get_info_t rx_curr_get_info; #ifndef CONFIG_S2IO_NAPI /* Index to the absolute position of the put pointer of Rx ring */ int put_pos; #endif #ifdef CONFIG_2BUFF_MODE /* Buffer Address store. */ buffAdd_t **ba; #endif nic_t *nic; } ring_info_t; /* Fifo specific structure */ typedef struct fifo_info { /* FIFO number */ int fifo_no; /* Maximum TxDs per TxDL */ int max_txds; /* Place holder of all the TX List's Phy and Virt addresses. */ list_info_hold_t *list_info; /* * Current offset within the tx FIFO where driver would write * new Tx frame */ tx_curr_put_info_t tx_curr_put_info; /* * Current offset within tx FIFO from where the driver would start freeing * the buffers */ tx_curr_get_info_t tx_curr_get_info; nic_t *nic; }fifo_info_t; /* Infomation related to the Tx and Rx FIFOs and Rings of Xena * is maintained in this structure. */ typedef struct mac_info { /* tx side stuff */ /* logical pointer of start of each Tx FIFO */ TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS]; /* Fifo specific structure */ fifo_info_t fifos[MAX_TX_FIFOS]; /* rx side stuff */ /* Ring specific structure */ ring_info_t rings[MAX_RX_RINGS]; u16 rmac_pause_time; u16 mc_pause_threshold_q0q3; u16 mc_pause_threshold_q4q7; void *stats_mem; /* orignal pointer to allocated mem */ dma_addr_t stats_mem_phy; /* Physical address of the stat block */ u32 stats_mem_sz; StatInfo_t *stats_info; /* Logical address of the stat block */ } mac_info_t; /* structure representing the user defined MAC addresses */ typedef struct { char addr[ETH_ALEN]; int usage_cnt; } usr_addr_t; /* Default Tunable parameters of the NIC. */ #define DEFAULT_FIFO_LEN 4096 #define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1) #define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1) #define SMALL_BLK_CNT 30 #define LARGE_BLK_CNT 100 /* Structure representing one instance of the NIC */ struct s2io_nic { #ifdef CONFIG_S2IO_NAPI /* * Count of packets to be processed in a given iteration, it will be indicated * by the quota field of the device structure when NAPI is enabled. */ int pkts_to_process; #endif struct net_device *dev; mac_info_t mac_control; struct config_param config; struct pci_dev *pdev; void __iomem *bar0; void __iomem *bar1; #define MAX_MAC_SUPPORTED 16 #define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED macaddr_t def_mac_addr[MAX_MAC_SUPPORTED]; macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED]; struct net_device_stats stats; int high_dma_flag; int device_close_flag; int device_enabled_once; char name[50]; struct tasklet_struct task; volatile unsigned long tasklet_status; /* Space to back up the PCI config space */ u32 config_space[256 / sizeof(u32)]; atomic_t rx_bufs_left[MAX_RX_RINGS]; spinlock_t tx_lock; #ifndef CONFIG_S2IO_NAPI spinlock_t put_lock; #endif #define PROMISC 1 #define ALL_MULTI 2 #define MAX_ADDRS_SUPPORTED 64 u16 usr_addr_count; u16 mc_addr_count; usr_addr_t usr_addrs[MAX_ADDRS_SUPPORTED]; u16 m_cast_flg; u16 all_multi_pos; u16 promisc_flg; u16 tx_pkt_count; u16 rx_pkt_count; u16 tx_err_count; u16 rx_err_count; /* Id timer, used to blink NIC to physically identify NIC. */ struct timer_list id_timer; /* Restart timer, used to restart NIC if the device is stuck and * a schedule task that will set the correct Link state once the * NIC's PHY has stabilized after a state change. */ #ifdef INIT_TQUEUE struct tq_struct rst_timer_task; struct tq_struct set_link_task; #else struct work_struct rst_timer_task; struct work_struct set_link_task; #endif /* Flag that can be used to turn on or turn off the Rx checksum * offload feature. */ int rx_csum; /* after blink, the adapter must be restored with original * values. */ u64 adapt_ctrl_org; /* Last known link state. */ u16 last_link_state; #define LINK_DOWN 1 #define LINK_UP 2 int task_flag; #define CARD_DOWN 1 #define CARD_UP 2 atomic_t card_state; volatile unsigned long link_state; spinlock_t rx_lock; atomic_t isr_cnt; }; #define RESET_ERROR 1; #define CMD_ERROR 2; /* OS related system calls */ #ifndef readq static inline u64 readq(void __iomem *addr) { u64 ret = 0; ret = readl(addr + 4); (u64) ret <<= 32; (u64) ret |= readl(addr); return ret; } #endif #ifndef writeq static inline void writeq(u64 val, void __iomem *addr) { writel((u32) (val), addr); writel((u32) (val >> 32), (addr + 4)); } /* In 32 bit modes, some registers have to be written in a * particular order to expect correct hardware operation. The * macro SPECIAL_REG_WRITE is used to perform such ordered * writes. Defines UF (Upper First) and LF (Lower First) will * be used to specify the required write order. */ #define UF 1 #define LF 2 static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order) { if (order == LF) { writel((u32) (val), addr); writel((u32) (val >> 32), (addr + 4)); } else { writel((u32) (val >> 32), (addr + 4)); writel((u32) (val), addr); } } #else #define SPECIAL_REG_WRITE(val, addr, dummy) writeq(val, addr) #endif /* Interrupt related values of Xena */ #define ENABLE_INTRS 1 #define DISABLE_INTRS 2 /* Highest level interrupt blocks */ #define TX_PIC_INTR (0x0001<<0) #define TX_DMA_INTR (0x0001<<1) #define TX_MAC_INTR (0x0001<<2) #define TX_XGXS_INTR (0x0001<<3) #define TX_TRAFFIC_INTR (0x0001<<4) #define RX_PIC_INTR (0x0001<<5) #define RX_DMA_INTR (0x0001<<6) #define RX_MAC_INTR (0x0001<<7) #define RX_XGXS_INTR (0x0001<<8) #define RX_TRAFFIC_INTR (0x0001<<9) #define MC_INTR (0x0001<<10) #define ENA_ALL_INTRS ( TX_PIC_INTR | \ TX_DMA_INTR | \ TX_MAC_INTR | \ TX_XGXS_INTR | \ TX_TRAFFIC_INTR | \ RX_PIC_INTR | \ RX_DMA_INTR | \ RX_MAC_INTR | \ RX_XGXS_INTR | \ RX_TRAFFIC_INTR | \ MC_INTR ) /* Interrupt masks for the general interrupt mask register */ #define DISABLE_ALL_INTRS 0xFFFFFFFFFFFFFFFFULL #define TXPIC_INT_M BIT(0) #define TXDMA_INT_M BIT(1) #define TXMAC_INT_M BIT(2) #define TXXGXS_INT_M BIT(3) #define TXTRAFFIC_INT_M BIT(8) #define PIC_RX_INT_M BIT(32) #define RXDMA_INT_M BIT(33) #define RXMAC_INT_M BIT(34) #define MC_INT_M BIT(35) #define RXXGXS_INT_M BIT(36) #define RXTRAFFIC_INT_M BIT(40) /* PIC level Interrupts TODO*/ /* DMA level Inressupts */ #define TXDMA_PFC_INT_M BIT(0) #define TXDMA_PCC_INT_M BIT(2) /* PFC block interrupts */ #define PFC_MISC_ERR_1 BIT(0) /* Interrupt to indicate FIFO full */ /* PCC block interrupts. */ #define PCC_FB_ECC_ERR vBIT(0xff, 16, 8) /* Interrupt to indicate PCC_FB_ECC Error. */ #define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG) /* * Prototype declaration. */ static int __devinit s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre); static void __devexit s2io_rem_nic(struct pci_dev *pdev); static int init_shared_mem(struct s2io_nic *sp); static void free_shared_mem(struct s2io_nic *sp); static int init_nic(struct s2io_nic *nic); static void rx_intr_handler(ring_info_t *ring_data); static void tx_intr_handler(fifo_info_t *fifo_data); static void alarm_intr_handler(struct s2io_nic *sp); static int s2io_starter(void); void s2io_closer(void); static void s2io_tx_watchdog(struct net_device *dev); static void s2io_tasklet(unsigned long dev_addr); static void s2io_set_multicast(struct net_device *dev); static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp); void s2io_link(nic_t * sp, int link); void s2io_reset(nic_t * sp); #if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget); #endif static void s2io_init_pci(nic_t * sp); int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; static void s2io_set_link(unsigned long data); int s2io_set_swapper(nic_t * sp); static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); int get_xena_rev_id(struct pci_dev *pdev); #endif /* _S2IO_H */