forked from luck/tmp_suning_uos_patched
eb78f9b3fa
When we setup the panel interface whilst configuring the framebuffer, we should ensure the panel interface is not in tristate, in case the bootloader or previous setup has not enabled it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
384 lines
12 KiB
C
384 lines
12 KiB
C
/* sm501-regs.h
|
|
*
|
|
* Copyright 2006 Simtec Electronics
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Silicon Motion SM501 register definitions
|
|
*/
|
|
|
|
/* System Configuration area */
|
|
/* System config base */
|
|
#define SM501_SYS_CONFIG (0x000000)
|
|
|
|
/* config 1 */
|
|
#define SM501_SYSTEM_CONTROL (0x000000)
|
|
|
|
#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0)
|
|
#define SM501_SYSCTRL_MEM_TRISTATE (1<<1)
|
|
#define SM501_SYSCTRL_CRT_TRISTATE (1<<2)
|
|
|
|
#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
|
|
#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
|
|
#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
|
|
#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
|
|
#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)
|
|
|
|
#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6)
|
|
#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
|
|
#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11)
|
|
#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)
|
|
|
|
/* miscellaneous control */
|
|
|
|
#define SM501_MISC_CONTROL (0x000004)
|
|
|
|
#define SM501_MISC_BUS_SH (0x0)
|
|
#define SM501_MISC_BUS_PCI (0x1)
|
|
#define SM501_MISC_BUS_XSCALE (0x2)
|
|
#define SM501_MISC_BUS_NEC (0x6)
|
|
#define SM501_MISC_BUS_MASK (0x7)
|
|
|
|
#define SM501_MISC_VR_62MB (1<<3)
|
|
#define SM501_MISC_CDR_RESET (1<<7)
|
|
#define SM501_MISC_USB_LB (1<<8)
|
|
#define SM501_MISC_USB_SLAVE (1<<9)
|
|
#define SM501_MISC_BL_1 (1<<10)
|
|
#define SM501_MISC_MC (1<<11)
|
|
#define SM501_MISC_DAC_POWER (1<<12)
|
|
#define SM501_MISC_IRQ_INVERT (1<<16)
|
|
#define SM501_MISC_SH (1<<17)
|
|
|
|
#define SM501_MISC_HOLD_EMPTY (0<<18)
|
|
#define SM501_MISC_HOLD_8 (1<<18)
|
|
#define SM501_MISC_HOLD_16 (2<<18)
|
|
#define SM501_MISC_HOLD_24 (3<<18)
|
|
#define SM501_MISC_HOLD_32 (4<<18)
|
|
#define SM501_MISC_HOLD_MASK (7<<18)
|
|
|
|
#define SM501_MISC_FREQ_12 (1<<24)
|
|
#define SM501_MISC_PNL_24BIT (1<<25)
|
|
#define SM501_MISC_8051_LE (1<<26)
|
|
|
|
|
|
|
|
#define SM501_GPIO31_0_CONTROL (0x000008)
|
|
#define SM501_GPIO63_32_CONTROL (0x00000C)
|
|
#define SM501_DRAM_CONTROL (0x000010)
|
|
|
|
/* command list */
|
|
#define SM501_ARBTRTN_CONTROL (0x000014)
|
|
|
|
/* command list */
|
|
#define SM501_COMMAND_LIST_STATUS (0x000024)
|
|
|
|
/* interrupt debug */
|
|
#define SM501_RAW_IRQ_STATUS (0x000028)
|
|
#define SM501_RAW_IRQ_CLEAR (0x000028)
|
|
#define SM501_IRQ_STATUS (0x00002C)
|
|
#define SM501_IRQ_MASK (0x000030)
|
|
#define SM501_DEBUG_CONTROL (0x000034)
|
|
|
|
/* power management */
|
|
#define SM501_POWERMODE_P2X_SRC (1<<29)
|
|
#define SM501_POWERMODE_V2X_SRC (1<<20)
|
|
#define SM501_POWERMODE_M_SRC (1<<12)
|
|
#define SM501_POWERMODE_M1_SRC (1<<4)
|
|
|
|
#define SM501_CURRENT_GATE (0x000038)
|
|
#define SM501_CURRENT_CLOCK (0x00003C)
|
|
#define SM501_POWER_MODE_0_GATE (0x000040)
|
|
#define SM501_POWER_MODE_0_CLOCK (0x000044)
|
|
#define SM501_POWER_MODE_1_GATE (0x000048)
|
|
#define SM501_POWER_MODE_1_CLOCK (0x00004C)
|
|
#define SM501_SLEEP_MODE_GATE (0x000050)
|
|
#define SM501_POWER_MODE_CONTROL (0x000054)
|
|
|
|
/* power gates for units within the 501 */
|
|
#define SM501_GATE_HOST (0)
|
|
#define SM501_GATE_MEMORY (1)
|
|
#define SM501_GATE_DISPLAY (2)
|
|
#define SM501_GATE_2D_ENGINE (3)
|
|
#define SM501_GATE_CSC (4)
|
|
#define SM501_GATE_ZVPORT (5)
|
|
#define SM501_GATE_GPIO (6)
|
|
#define SM501_GATE_UART0 (7)
|
|
#define SM501_GATE_UART1 (8)
|
|
#define SM501_GATE_SSP (10)
|
|
#define SM501_GATE_USB_HOST (11)
|
|
#define SM501_GATE_USB_GADGET (12)
|
|
#define SM501_GATE_UCONTROLLER (17)
|
|
#define SM501_GATE_AC97 (18)
|
|
|
|
/* panel clock */
|
|
#define SM501_CLOCK_P2XCLK (24)
|
|
/* crt clock */
|
|
#define SM501_CLOCK_V2XCLK (16)
|
|
/* main clock */
|
|
#define SM501_CLOCK_MCLK (8)
|
|
/* SDRAM controller clock */
|
|
#define SM501_CLOCK_M1XCLK (0)
|
|
|
|
/* config 2 */
|
|
#define SM501_PCI_MASTER_BASE (0x000058)
|
|
#define SM501_ENDIAN_CONTROL (0x00005C)
|
|
#define SM501_DEVICEID (0x000060)
|
|
/* 0x050100A0 */
|
|
|
|
#define SM501_DEVICEID_SM501 (0x05010000)
|
|
#define SM501_DEVICEID_IDMASK (0xffff0000)
|
|
|
|
#define SM501_PLLCLOCK_COUNT (0x000064)
|
|
#define SM501_MISC_TIMING (0x000068)
|
|
#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
|
|
|
|
/* GPIO base */
|
|
#define SM501_GPIO (0x010000)
|
|
#define SM501_GPIO_DATA_LOW (0x00)
|
|
#define SM501_GPIO_DATA_HIGH (0x04)
|
|
#define SM501_GPIO_DDR_LOW (0x08)
|
|
#define SM501_GPIO_DDR_HIGH (0x0C)
|
|
#define SM501_GPIO_IRQ_SETUP (0x10)
|
|
#define SM501_GPIO_IRQ_STATUS (0x14)
|
|
#define SM501_GPIO_IRQ_RESET (0x14)
|
|
|
|
/* I2C controller base */
|
|
#define SM501_I2C (0x010040)
|
|
#define SM501_I2C_BYTE_COUNT (0x00)
|
|
#define SM501_I2C_CONTROL (0x01)
|
|
#define SM501_I2C_STATUS (0x02)
|
|
#define SM501_I2C_RESET (0x02)
|
|
#define SM501_I2C_SLAVE_ADDRESS (0x03)
|
|
#define SM501_I2C_DATA (0x04)
|
|
|
|
/* SSP base */
|
|
#define SM501_SSP (0x020000)
|
|
|
|
/* Uart 0 base */
|
|
#define SM501_UART0 (0x030000)
|
|
|
|
/* Uart 1 base */
|
|
#define SM501_UART1 (0x030020)
|
|
|
|
/* USB host port base */
|
|
#define SM501_USB_HOST (0x040000)
|
|
|
|
/* USB slave/gadget base */
|
|
#define SM501_USB_GADGET (0x060000)
|
|
|
|
/* USB slave/gadget data port base */
|
|
#define SM501_USB_GADGET_DATA (0x070000)
|
|
|
|
/* Display contoller/video engine base */
|
|
#define SM501_DC (0x080000)
|
|
|
|
/* common defines for the SM501 address registers */
|
|
#define SM501_ADDR_FLIP (1<<31)
|
|
#define SM501_ADDR_EXT (1<<27)
|
|
#define SM501_ADDR_CS1 (1<<26)
|
|
#define SM501_ADDR_MASK (0x3f << 26)
|
|
|
|
#define SM501_FIFO_MASK (0x3 << 16)
|
|
#define SM501_FIFO_1 (0x0 << 16)
|
|
#define SM501_FIFO_3 (0x1 << 16)
|
|
#define SM501_FIFO_7 (0x2 << 16)
|
|
#define SM501_FIFO_11 (0x3 << 16)
|
|
|
|
/* common registers for panel and the crt */
|
|
#define SM501_OFF_DC_H_TOT (0x000)
|
|
#define SM501_OFF_DC_V_TOT (0x008)
|
|
#define SM501_OFF_DC_H_SYNC (0x004)
|
|
#define SM501_OFF_DC_V_SYNC (0x00C)
|
|
|
|
#define SM501_DC_PANEL_CONTROL (0x000)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
|
|
#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
|
|
#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
|
|
#define SM501_DC_PANEL_CONTROL_VDD (1<<24)
|
|
#define SM501_DC_PANEL_CONTROL_DP (1<<23)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
|
|
#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
|
|
#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_DE (1<<20)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
|
|
#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
|
|
#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_CP (1<<14)
|
|
#define SM501_DC_PANEL_CONTROL_VSP (1<<13)
|
|
#define SM501_DC_PANEL_CONTROL_HSP (1<<12)
|
|
#define SM501_DC_PANEL_CONTROL_CK (1<<9)
|
|
#define SM501_DC_PANEL_CONTROL_TE (1<<8)
|
|
#define SM501_DC_PANEL_CONTROL_VPD (1<<7)
|
|
#define SM501_DC_PANEL_CONTROL_VP (1<<6)
|
|
#define SM501_DC_PANEL_CONTROL_HPD (1<<5)
|
|
#define SM501_DC_PANEL_CONTROL_HP (1<<4)
|
|
#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
|
|
#define SM501_DC_PANEL_CONTROL_EN (1<<2)
|
|
|
|
#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
|
|
#define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
|
|
#define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
|
|
|
|
|
|
#define SM501_DC_PANEL_PANNING_CONTROL (0x004)
|
|
#define SM501_DC_PANEL_COLOR_KEY (0x008)
|
|
#define SM501_DC_PANEL_FB_ADDR (0x00C)
|
|
#define SM501_DC_PANEL_FB_OFFSET (0x010)
|
|
#define SM501_DC_PANEL_FB_WIDTH (0x014)
|
|
#define SM501_DC_PANEL_FB_HEIGHT (0x018)
|
|
#define SM501_DC_PANEL_TL_LOC (0x01C)
|
|
#define SM501_DC_PANEL_BR_LOC (0x020)
|
|
#define SM501_DC_PANEL_H_TOT (0x024)
|
|
#define SM501_DC_PANEL_H_SYNC (0x028)
|
|
#define SM501_DC_PANEL_V_TOT (0x02C)
|
|
#define SM501_DC_PANEL_V_SYNC (0x030)
|
|
#define SM501_DC_PANEL_CUR_LINE (0x034)
|
|
|
|
#define SM501_DC_VIDEO_CONTROL (0x040)
|
|
#define SM501_DC_VIDEO_FB0_ADDR (0x044)
|
|
#define SM501_DC_VIDEO_FB_WIDTH (0x048)
|
|
#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
|
|
#define SM501_DC_VIDEO_TL_LOC (0x050)
|
|
#define SM501_DC_VIDEO_BR_LOC (0x054)
|
|
#define SM501_DC_VIDEO_SCALE (0x058)
|
|
#define SM501_DC_VIDEO_INIT_SCALE (0x05C)
|
|
#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
|
|
#define SM501_DC_VIDEO_FB1_ADDR (0x064)
|
|
#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
|
|
|
|
#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
|
|
#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
|
|
#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
|
|
#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
|
|
#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
|
|
#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
|
|
#define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
|
|
#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
|
|
#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
|
|
#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
|
|
|
|
#define SM501_DC_PANEL_HWC_BASE (0x0F0)
|
|
#define SM501_DC_PANEL_HWC_ADDR (0x0F0)
|
|
#define SM501_DC_PANEL_HWC_LOC (0x0F4)
|
|
#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
|
|
#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
|
|
|
|
#define SM501_HWC_EN (1<<31)
|
|
|
|
#define SM501_OFF_HWC_ADDR (0x00)
|
|
#define SM501_OFF_HWC_LOC (0x04)
|
|
#define SM501_OFF_HWC_COLOR_1_2 (0x08)
|
|
#define SM501_OFF_HWC_COLOR_3 (0x0C)
|
|
|
|
#define SM501_DC_ALPHA_CONTROL (0x100)
|
|
#define SM501_DC_ALPHA_FB_ADDR (0x104)
|
|
#define SM501_DC_ALPHA_FB_OFFSET (0x108)
|
|
#define SM501_DC_ALPHA_TL_LOC (0x10C)
|
|
#define SM501_DC_ALPHA_BR_LOC (0x110)
|
|
#define SM501_DC_ALPHA_CHROMA_KEY (0x114)
|
|
#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
|
|
|
|
#define SM501_DC_CRT_CONTROL (0x200)
|
|
|
|
#define SM501_DC_CRT_CONTROL_TVP (1<<15)
|
|
#define SM501_DC_CRT_CONTROL_CP (1<<14)
|
|
#define SM501_DC_CRT_CONTROL_VSP (1<<13)
|
|
#define SM501_DC_CRT_CONTROL_HSP (1<<12)
|
|
#define SM501_DC_CRT_CONTROL_VS (1<<11)
|
|
#define SM501_DC_CRT_CONTROL_BLANK (1<<10)
|
|
#define SM501_DC_CRT_CONTROL_SEL (1<<9)
|
|
#define SM501_DC_CRT_CONTROL_TE (1<<8)
|
|
#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
|
|
#define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
|
|
#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
|
|
|
|
#define SM501_DC_CRT_CONTROL_8BPP (0<<0)
|
|
#define SM501_DC_CRT_CONTROL_16BPP (1<<0)
|
|
#define SM501_DC_CRT_CONTROL_32BPP (2<<0)
|
|
|
|
#define SM501_DC_CRT_FB_ADDR (0x204)
|
|
#define SM501_DC_CRT_FB_OFFSET (0x208)
|
|
#define SM501_DC_CRT_H_TOT (0x20C)
|
|
#define SM501_DC_CRT_H_SYNC (0x210)
|
|
#define SM501_DC_CRT_V_TOT (0x214)
|
|
#define SM501_DC_CRT_V_SYNC (0x218)
|
|
#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
|
|
#define SM501_DC_CRT_CUR_LINE (0x220)
|
|
#define SM501_DC_CRT_MONITOR_DETECT (0x224)
|
|
|
|
#define SM501_DC_CRT_HWC_BASE (0x230)
|
|
#define SM501_DC_CRT_HWC_ADDR (0x230)
|
|
#define SM501_DC_CRT_HWC_LOC (0x234)
|
|
#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
|
|
#define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
|
|
|
|
#define SM501_DC_PANEL_PALETTE (0x400)
|
|
|
|
#define SM501_DC_VIDEO_PALETTE (0x800)
|
|
|
|
#define SM501_DC_CRT_PALETTE (0xC00)
|
|
|
|
/* Zoom Video port base */
|
|
#define SM501_ZVPORT (0x090000)
|
|
|
|
/* AC97/I2S base */
|
|
#define SM501_AC97 (0x0A0000)
|
|
|
|
/* 8051 micro controller base */
|
|
#define SM501_UCONTROLLER (0x0B0000)
|
|
|
|
/* 8051 micro controller SRAM base */
|
|
#define SM501_UCONTROLLER_SRAM (0x0C0000)
|
|
|
|
/* DMA base */
|
|
#define SM501_DMA (0x0D0000)
|
|
|
|
/* 2d engine base */
|
|
#define SM501_2D_ENGINE (0x100000)
|
|
#define SM501_2D_SOURCE (0x00)
|
|
#define SM501_2D_DESTINATION (0x04)
|
|
#define SM501_2D_DIMENSION (0x08)
|
|
#define SM501_2D_CONTROL (0x0C)
|
|
#define SM501_2D_PITCH (0x10)
|
|
#define SM501_2D_FOREGROUND (0x14)
|
|
#define SM501_2D_BACKGROUND (0x18)
|
|
#define SM501_2D_STRETCH (0x1C)
|
|
#define SM501_2D_COLOR_COMPARE (0x20)
|
|
#define SM501_2D_COLOR_COMPARE_MASK (0x24)
|
|
#define SM501_2D_MASK (0x28)
|
|
#define SM501_2D_CLIP_TL (0x2C)
|
|
#define SM501_2D_CLIP_BR (0x30)
|
|
#define SM501_2D_MONO_PATTERN_LOW (0x34)
|
|
#define SM501_2D_MONO_PATTERN_HIGH (0x38)
|
|
#define SM501_2D_WINDOW_WIDTH (0x3C)
|
|
#define SM501_2D_SOURCE_BASE (0x40)
|
|
#define SM501_2D_DESTINATION_BASE (0x44)
|
|
#define SM501_2D_ALPHA (0x48)
|
|
#define SM501_2D_WRAP (0x4C)
|
|
#define SM501_2D_STATUS (0x50)
|
|
|
|
#define SM501_CSC_Y_SOURCE_BASE (0xC8)
|
|
#define SM501_CSC_CONSTANTS (0xCC)
|
|
#define SM501_CSC_Y_SOURCE_X (0xD0)
|
|
#define SM501_CSC_Y_SOURCE_Y (0xD4)
|
|
#define SM501_CSC_U_SOURCE_BASE (0xD8)
|
|
#define SM501_CSC_V_SOURCE_BASE (0xDC)
|
|
#define SM501_CSC_SOURCE_DIMENSION (0xE0)
|
|
#define SM501_CSC_SOURCE_PITCH (0xE4)
|
|
#define SM501_CSC_DESTINATION (0xE8)
|
|
#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
|
|
#define SM501_CSC_DESTINATION_PITCH (0xF0)
|
|
#define SM501_CSC_SCALE_FACTOR (0xF4)
|
|
#define SM501_CSC_DESTINATION_BASE (0xF8)
|
|
#define SM501_CSC_CONTROL (0xFC)
|
|
|
|
/* 2d engine data port base */
|
|
#define SM501_2D_ENGINE_DATA (0x110000)
|